CS4 InDesign serial key not working

I have purchased CS4, now am trying to reinstall InDesign software CS4 serial key is not working

Serial numbers are good only for the same product (entire suite package, or individual application, upgrade or full version) on the same Operating System. If you have downloaded  the installer, make sure you have the correct one.

Similar Messages

  • Serial Key not working for Adobe Creative Suite 5 Design Premium

    I have the serial key for my Adobe Creative Suite 5 Design Premium that I bought in 2011 on my account page. However, when I put the serial number in the installer, it says "This serial number is not valid for this product."
    I just want access to the product I bought. Can anybody help me?

    Are you definitely installing Design Premium CS5, not a similar sounding Creative Suite? And not CS5.5?

  • CS6 Master Collection Serial Key not working!!!

    apparently I have 2 active serial no. for cs6 in my account but non of them are working. the first one was working for about 2 years and it stop working suddenly, then they said that it was a problem for Adobe so they gave me the second one. but this one is not working either. I've asked them and they told me that the first one is active now and I should use that one. but it still says it can not validate my serial no. . so I asked them again and they told me maybe I should download the master collection again but honestly I didn't do that. I have a limited connection to the internet and that would take me days to download that all again.what should i do now?

    Maybe you could visit somewhere where you can have a better internet service, or find someone who does and have them download the programs to removable media.  If you cannot find a way to redownload the files and do what they told you to do, then your only recourse is to get back to them and convince them to work with you to resolve this.  No one in this forum can perform any service for you relative to your serial number.

  • CS4 Acrobat Serial number not working on reinstall (new Mac)

    I'm using Acrobat as part of CS4. It was a gift from a fellow creative friend. The install worked back in 2009 on my previous Mac. For some reason, the serial number no longer works when I go to run Acrobat. It's been rejecting the serial number on the CS4 package for months, now.
    Help? I hardly use the software (I've a toddler) but I do need Acrobat's functionality once in a while. Thanks in advance!

    Did you actually install the whole suite or is the Acrobat running on a separate serial? Ever had any trial versions on the system?
    Mylenium

  • Wired keyboard-number pad&right arrow keys not working-serial # help!

    Hello to whomever reads/replies -
    I have a wired keyboard for my iMac(it's not the aluminum imac, but the version before it with the keyboard and mouse that came with it). I got this keyboard June 2007 after the original keyboard sent to me had problems with it with some keys not working properly. And now about a week ago my right arrow key and the zero, decimal point, one, two, three and enter button on the keypad stopped working out of the blue. One night they worked and the next they didn't with nothing being done different, nor was the keyboard stored differently.
    I've cleaned the keyboard inside and out twice and tried pushing the little squishy thing under the keys when you pop them off and there's no response with those being pushed either so something's got to be wrong with the keyboard itself.
    Also, when I go online to look up the warrenty on this keyboard, #1 i can't find where it tells me where the serial number on the **** WIRED keyboard is, just gives me where i can find it on the WIRELESS keyboards. Ugh. So I looked under my keyboard and punched in the numbers and letters that i found on a little silver plate just below where the wire and USB ports are in the top of the keyboard and I get an 'invalid serial number' error message.
    So.. could anyone help me with these problems? I'd really rather not call tech support since it took me over two hours to explain to the man that I spoke with last year about my other keyboard and I just don't have the time! Thanks in advance!
    Sharon

    Hello sharon:
    Welcome to Apple discussions.
    Run, don't walk to the phone. Call Applecare and indicate you have a warranty problem. The KB is (or will be shortly) out of warranty. It may take you some time, but it may save you some money in the long run.
    Incidentally, it appears to me that your KB is, indeed, broken.
    Barry

  • Adobe Staff Please Read - Tab Key Not Working in InDesign HTML5 based panel

    Tab Key Not Working in InDesign HTML5 based panel
    Instead of changing focus to next entry field when the tab key is pressed it hides the panel instead.
    UI Nightmare.

    I’m using editable text fields. When I hit tab nothing happens. Focus stays on current text field.
    Mike Baugh • Creative
    Director, Digital Production
    +1 240-662-4442 office
    +1 410-807-1633 mobile
    [email protected]<mailto:[email protected]>
    agency.discovery.com<http://agency.discovery.com/>

  • CS4 - Acrobat 9 Pro not working on Win 8.1

    Hello
    We have severe problems installing Acrobat 9 Pro from the CS4 Suite. Setup always cancels the installation (see Re: Error 1603 when installing CS4 on Windows 8.1).
    However, we downloaded and successfully installed a standalone version of Adobe Acrobat 9 Pro. But the CS4 serial does not work on the standalone version.
    Can you send us a serial number that works? We can provide you with the CS4 serial for verification. Please send us an address to send it to you privately.
    Thanks a lot!
    Simon Sunke

    Go to your Control Panel, find the Windows Firewall, after you open that, you need to click on Advanced settings. Click on Inbound Rules, scroll down until you see Java, it maybe listed several times. Right click on the ones that are blocked and select Properties.
    On the General tab, you will see a section called Action, you will need to tick the Allow the connection. Apply and then OK, do that for all blocked Java entries.
    EDIT: Sorry I missed where you said that it wasn't showing up. Are you looking in the "Inbound Rules"? If so, did you install the 32bit version? Even on a 64bit OS, you should have the 32bit installed. You can also always add the Java entry into
    the firewall setting. I will type out how to do that if you need.
    I tried to upload an image for you, but the site won't let me.
    Now if Java was the only thing not connecting, then you should be good to go, if you still have an issue with Java, then follow the steps again, but this time, you will need to open the Advanced tab and under the Profiles section, check the private box,
    apply and OK.

  • Where can I download - Creative Suite 4.0 Design Standard ME version (in the normal version located at the download page the serial is not working)

    where can I download - Creative Suite 4.0 Design Standard ME version (in the normal version located at the download page the serial is not working - Download CS4 products.

    Hi there,
    Please download the installer from here - Download Adobe CS4 and CS3 Free Trials Here (incl. After Effects) | ProDesignTools
    ^Ani

  • FN keys not working Hp probook 4320s

    Hello
    I am having a problem with the FN keys on a HP Probook 4320s and using openbox.
    When I tried an ubuntu live cd the brightness, volume etc, worked just fine.
    Using xev I got this output while hitting the keys
    KeyRelease event, serial 40, synthetic NO, window 0x1800001,
        root 0x152, subw 0x0, time 1722303, (-375,141), root:(717,436),
        state 0x0, keycode 233 (keysym 0x1008ff02, XF86MonBrightnessUp), same_screen YES,
        XLookupString gives 0 bytes:
        XFilterEvent returns: False
    Also when I echo a value in  /sys/class/backlight/acpi_video0/brightness the brightness changes but still fn keys not working.
    Can anyone help me with this?.

    I am having a problem with the FN keys on a HP Probook 4320s and using openbox.
    When I tried an ubuntu live cd the brightness, volume etc, worked just fine.
    Openbox is a window manager, not an environment like Gnome. It manages windows, not your screen brightness and wireless settings.
    I can reverse the action in ubuntu and see what is wrong in arch.
    Nothing is wrong. And your keys work fine, I know because mine do.
    Is there a way to see what is called when pressing the keys in ubuntu?
    They developed their own notifications that handle this. You can just call xbacklight and amixer for a start from xbindkeys.
    For volume and brightness an applet is nicer to get the visal cue, you can do that with a little bash and Zenity easily, or code your own in GTK (I used pygtk for mine).

  • A s d f g keys not working on a wireless Apple keyboard for Imac

    a s d f g keys not working on a wireless Apple keyboard for Imac.
    When I type they on't work.
    *Exmple o complete entence.
    Plee help! Thi i very rutrtin. I on't wnt to ue cut n pte or ome letter.
    Thnk you in vnce.

    Make a Service appointment for the keyboard at your local AASP.
    Apple - Find Locations
    I'm not sure how old it is, but it is covered for 1 full year as long as it didn't take that 19 story dive.

  • Volume and brightness keys not working with new keyboard on imac

    I just purchased a new wired keyboard for imac and brightness and volume control keys not working . i have tried adjusting keyboard settings. I have software version 10.5.8. Do I need to upgrade software. Thank you for any help.

    Do you have "Automatically Adjust Brightness" check box ticked in System Preferences > Displays > Display ? If so, you can't manually adjust brightness.

  • Have just down loaded Yosemite over Mountain Lion, Indesign CS5 does not work ( Am dependant on it) although Bridge , Light Room and Elements operate OK How do I solve this rapidly. Can any one help on this issue. Thanks

    Have just down loaded Yosemite over Mountain Lion, Indesign CS5 does not work ( Am dependant on it) although Bridge , Light Room and Elements operate OK How do I solve this rapidly. Can any one help on this issue. Thanks

    Sorry to say it, but I think you can see from Bob's response that there's no way to solve this rapidly.
    Did you take an image of your Mountain Lion install before upgrading to Yosemite? Roll back to that. If you're not in the habit of taking a snapshot of your system before performing operating system upgrades - get in that habit. If you are dependent on anything at all on hour computer, having a reliable backup method in place is essential. If you don't have a Time Capsule, or some other way to run Time Machine onto a disk that's not in your computer, go set that up yesterday.
    If you can't just remove Yosemite and roll back to Mountain Lion for whatever reason, you can partition your drive so that you can install both Yosemite and Mountain Lion on the same drive, and then boot into Mountain Lion when you need to work in CS5. Or you can take your Mountain Lion disc (I assume you have one, no?) and then use it to create a virtual machine in something like VirtualBox to run Mountain Lion from inside Yosemite.

  • Why is  my serial number not working, it says it is invalid.  I have checked and it is correct

    why is  my serial number not working, it says it is invalid.  I have checked and it is correct

    The most likely explanation is that you downloaded the Creative Cloud version of Lightroom instead of the standalone version of Lightroom (which you can download from here).
    If that doesn't work, you'd need to provide a lot more details, including version of Lightroom, operating system, and exactly what you are doing that doesn't work.

  • Some keybaord keys not working after suspect virus on Tecra A

    Apostrophe, delete, semicolon and end keys not working after a suspected virus attack. I found record of the same problem on the net but apparently this guy fixed his problem after he found scroll lock or num lock on.
    This is not the case here but there is something going on with numlock - register shows 2 and not 0. change to 0 but when reboot back to 2 again.
    Suspect changed back by bios. I thought i couldnt get to bios because DEL key not working but found ESC works.
    Tried to reset default values for bios but then cannot save and exit as this required the END key to work.
    I was running XP at the time of the (suspected) attack and could not rectify the problem so put the computer back to the OEM status which i hoped would help - it did not, same problem so rather than install all the software on the computer again with XP i upgraded to Windows7 - fresh install.
    Still keys do not work - it was a real pain to start with as my computer was set up to ctl+alt+del to log in and i had to do this with on screen keyboard - XP - this also showed that numlock was on before and after windows boot.
    The reason i suspect a virus - my wife was watching one of her tv shows on line from home country (another toshiba laptop) and i needed to use that laptop for something else so i asked her to use mine - later on we turned the laptops off and in the morning turned tham back on again, the other laptop with AVG virus protection flagged several hits and this one with (FAMOUS and completely up to date) Norton flagged nothing - once i got into it using on screen keyboard.
    Problems with this computer was found after scanning with a different antivirus.
    Anyway - i am left with 4 keys that do not work on my keyboard (actually they did work after i logged into the computer for the first time but i had to hold them in for a long time - and then next time i rebooted, not work at all and havent ever since)
    Any assistance here would be greatly appreciated, i have been working on this all weekend with no joy at all.
    Thanks in advance.

    Thanks Xardas,
    I have essentially done both - tried Toshiba OEM status found on a small partition of the toshi hard drive - no good - then did a fresh install of Windows 7 - still no good
    You know - as cunning as it sounds - i cannot reload the default settings in BIOS as it requires the END key to work so i can Save & Exit - all i can do is Exit Without Save - i sort of feel snookered at the moment.
    Toshiba got back to me today and said that i have tried everything they would have (yeah for sure) and to take my machine into a service centre for a hardware check - yeah right on boys!
    Check out this guys post below found on Kioskea.net - getting close to a year ago...
    ms ml - Nov 10, 2009 12:52am GMT
    Hi there, I was hoping that you might be able to help me with the problem that I seem to be having with my Toshiba Satellite Laptop Keyboard too. For a few days now I havent been able to use a few of the keys on my keyboard, including (1) delete (the backspace key is still working though), (2) colon/semicolon, (3) apostrophe/quotation marks and (4) end (the home and PgUp and PgDn keys are still working though). Any suggestions?
    Identical to my problem....obviously this guy had the same problem as well...see below - same thread.
    yab - Feb 9, 2010 4:47am GMT
    hi did you ever figure this out? i have the same exact problem...
    However, i was not able to solve my problem the way this guy did - my scroll lock is not activated - it seems to work ok (on and off) i tested it using Excel to move around the cells.
    yab ms ml - Feb 9, 2010 7:57am GMT
    Nevermind. For me it was scroll lock. My apostrophe, semicolon, and delete keys are alive and working again. I hope you have the same easy fix.
    Incidently - never hear from the first guy again - probably ended up being his scroll lock.
    all sugestions welcome - sorry my smily face has no eyes -) guess why!

  • Esc key not working in windows 7

    Hi,
    I have a HP Pavilion dv6-4XXX series. It's almost been 2 years I bought this notebook. 
    Recently I faced an issue. The "ESC KEY" has stopped working. However I could find that it's working fine in BIOS but not when I am logged in to windows. I have windows-7 installed.
    Please let me know what could be the issue and the solution for the same.

    Hello siddharthmishra,
    You’re having a problem with the ESC key not working.
    Go to device manager and uninstall the keyboard and restart the computer. This should uninstall and reinstall the driver for the keyboard.
    Here is a link to device manager.
    If the problem has not been happening for very long, you might try a System Restore. This will take the system back to before the problem started happening without affecting any of your files.
    Here is a link to a System Restore.
    Let me know how everything goes.

Maybe you are looking for