[CS4][JS] How to place objects in different layout

Hi,
Currently we are working on the A4 layout size of InDesign documents, after page finalized, those articles is going to publish in both A4 and A3 document.
The question is how can we convert the A4 sized document into A3 sized document via java script.
I have tried to copy and paste the frames from A4 document to A3 document, but the frame sizes is not matching (calcuation of Geometric bounds is not so easy) and the Auto Layout option is not helping and its not resizing the text frames.
The A3 sized document have the same paragraph/character styles but with different font size to match the A4 pagination.
Any idea how to handle this in scripting.
Thanks in advance,
Karthik

No idea with scripts...
But could you not just export as a pdf and then place those on an A3 page layout

Similar Messages

Adobe CS4 AE, how to place images in order

Gentlemen !
Windows 7 Ultimate
6 GB Ram
AE CS4
I have about 3 layers of video (green screen), with 3 boys standing in front of Green Screen.
How Can I make the tallest boys layer appear in the back and the medium boy layer in front of him and the 3rd in front of all layer or in front of medium boy layer, so the image would look like small, medium and large
Many thanks in advance !

Many thanks Szalam for the explanation, I know brother exactly what you and Mr. Dave wanted me to do , and I appreciated , but sometimes we run out of time , or finish certain within certain time frame, and that was my case I had to finish it , I had only 10 mins to do that then go back to colledge.
But the thing is that my answer was so simple , all I had to do was drag the video channels to my desired order , on the left , where you see eye symbols and next to it is the layer number and next to the layer number there is my shot and as I mentioned, all I had to do was drag it over the other layers. here is a snapshot

How to browse objects in different schemas

If I connect to the database in one schema is there a way to browse objects in a different schema? For example, I connect as hr and I want to view the tables in the ord schema.

Robert,
You have said you only see "a few" users under Other Users - does this mean you only see say six other schemas or does this mean you only see a small percentage of the available schemas?
With the current navigator interface, SQL Developer by default only displays a selection of values under each node. For example, if I have not filtered my "Other Users" node, I see about 50 schemas and a "Show More" at the bottom of the list. Note that the schemas appear to be randomly selected, although those selected are listed in order - my list includes schemas starting with A through X even though we have over 50 schemas starting with A.
You can either double click on the "Show More" and select "Show All" to get the full list, or filter to the specific schemas you want to see (ie just the production schemas and not the user schemas).
If you are seeing only a handful of users and you do not get the "Show More" option, right click on the "Other Users" node and select "Apply Filter" to check to see if you have somehow already filtered the list.
As a final note - you say you can see the production schemas through SQL+. Given that this without a graphical interface, do your "schema queries" produce the same result in SQL Developer as they do in SQL+?

Captivate 4: How to place objects in layers above swf animation?

Hello,
Is it possible to place an object in a layer over a Flash animation (in a lower layer)? Whenever I try to do this, and then try to play the slide in preview, the Flash animation always "covers" the content in the above layers. Any ideas?
Thanks,
SJPVT

About my first problem :
The first time I click the open Button, only the Hide button appears. Then I click this hide button, to hide the hide button (the hide button hide the swf and itself).
Then I click again to the open buton, and this time, the swf and the hide button appear.

How to changes Object in different system

Hi All,
All BW objects are owned by BWQ i want to make all the object are owned to BWD(Bcoz this is copied system). Is there any transaction i have to use.. please help me guyz.
Thanks
DST

Go to SE03, specify the object and change its directory entry (original system) to BWD and then it should be ok.

How to store flash objects in different location?

How store flash objects in different location?
Is this is possible to achieve?
reply me soon

Hi,
I believe you meant to post your question to the Flash forums: http://forums.adobe.com/community/flashplayer
This forum deals with Flash Access, Adobe's Digital Rights Management solution.
cheers,
/Eric.

Sharing objects between different tabs on a JTabbedPane

Does anyone know how to share objects on different tabs of a JTabbedPane? I.e., I want the same buttons/corporate logo to appear on each tab in the same location, and thus the same functionality, locations, look, etc...
Currently, if I invoke the add(Component) method for the same component but for different panes, only the pane that had the last add() method called contains the object.
Thanks,
adam

An instance of a GUI component can only be in one place in the GUI (visible or not).
You could make your own component class (extending JPanel and containing other components you want) and then create an instance of this for each tab.

Import objects between different SCV

Hi,
How can Import objects between different Software Component Versions
Thanks

Hi Sud,
what do you mean by "import objects"? you mean swcv dependencies?
you can make swcv dependencies in SLD.
suppose if you have swcv x and y.if you want to access objects in x from y then in SLD select swcv y,in dependencies tab add swcv x.
now all objects in swcv x are displayed under swcv y as <b>basis objects</b>.
Please let me know if your requirement is different.
Cheers,
Jag

Same Bank Cheque Different Layouts

Hi,
MY client wants to print continuous Axis Bank cheque printing for that i have modified the zscript and have done.
Now he wants to print axis cheque single leaf. Even though both cheques belongs to same bank the layouts are different.
Now they want to use single leaf for time being( they had just 200 copies of single leaf after that they are going to use continuous stationary).
My Doubt is where/how do differentiate these two different layouts for single bank.
I have one solution that attatch the layout for single leaf in fbzp for related company codes.
when ever they are going to use continuous stationary then i will attach the respective script in fbzp.
Is there any other solution....?? plze help me.

Hello Henri,
I hope I'm not going in against the rules by reviving this thread. But I have a similar problem as described by you above.
We have the situation that for CoCd 1 we have the EBS up and running, using FF_5 to upload the EBS works just fine. Now I had to configure the EBS CoCd 2, it's the same bank and so also the same bank key as CoCd 1 uses. So I have made all the settings similar to CoCd 1. The bank account is present in OT55, the house bank exists. As far as I can tell, all the settings are similar.
But I receive the same error as you describe above:
Bank details 60xxxxxxxx0 not in table T028B
Message no. FB759
Diagnosis
The bank detail with bank key and bank account 60XXXXXXXX0 was not allocated to a transaction type.
Procedure
Proceed
So the error message only gives me the bank account number and not the bank key. We use the following format: SWIFT MT940 - veld 86: structure recognized automatically.
When I check the bank file I was given as example, the set-up looks the exact same for both CoCd's, so I cannot figure out why 1 works and the other one doesn't.
I hope that you can help me.
Best regards,
Thijs

PS CS6 has a different set of installed fonts than my old PS CS4. How do I get my old fonts back? Don't like most of the CS6 fonts. Dell Precision, Windows 7. Does PS use the fonts in the Windows directory or does it use its own? A lot of my preferre

PS CS6 has a different set of installed fonts than my old PS CS4. How do I get my old fonts back? Don't like most of the newer CS6 fonts. Dell Precision, Windows 7. Does PS use the fonts in the Windows directory or does it use its own? If so, where are they in the directory? A lot of my preferred fonts show in the Windows directory but not in Photoshop, which does not display them within the program. Please help. If I get free fonts (NOT CC fonts) from elsewhere, where do I put them for Photoshop[ CS6 to use them? Thanks.

All versions of Photoshop get their fonts from your OS. Just install any missing font wherever Windows keeps fonts.
I don't do windows myself.

How to get similar color for objects in different pictures

how do you get similar color for objects in different pictures
I have a prodject that i'm working on and i need to edit several images at once (preferabley) so that they are the same color. They are wooden cupboards and i need all the wood looking the same colour. In light room you can edit a group of images at the same time hence the colours are the same . Is this possible in Elements ? If so how do i do this ?
I have tried duplicating layers and it just replaces the whole image, it seems to work using levels layers but not the other layers ... I have 30 more images to do and would ideally not like to adjust all the images manually ? I dont mind doing minor tweaks. Essentially all the images where taken with the same camera and lighting and lens's ...
Screen shot is where I'm at at the moment...
I have posted this question else where but was told to repost - this is a link to my previous post as to where we got to
http://forums.adobe.com/message/4720576#4720576

You could try using the raw converter. Open one file and edit it (File>Open, pick the image and choose Camera Raw as the format before you click Open). Then open the next image and click the little four-lined square on the upper right side of the ACR window and choose Previous Conversion from the flyout menu.

*How to Delet one same object from different roles*

I need to delete one auth object from different roles, Couls any one please advise me how can i do this and if there will be any complications involved with tis.
Best regards:
Maq

In PFCG, it may be that you have added some objects manually. To remove them you will have to go to pfcg.
Even if you first remove the objects from su24, you will have to go to all the roles through pfcg to generate them in expert mode by selecting the third option (edit old status and merge with new data)

How to place am mime object on the smartform ?

Hi All,
How to place am mime object on the smartform ?
Is there any function module to read a mime object from mime repository?
Any help would be appreciated.
Regards,
Raja Ram.

Hi Vishwa,
Thanks for your prompt response.
How to get the obj ID of a MIME object?
I checked in So2_MIME_REPOSITORY bur couldn't find?
Is there any mapping table between MIME object and object ID ?
I am very new to MIME objects.
Please tell me.
Regards,
Raja Ram.

How to place two different indesign documents side by side on my desktop in order to copy and paste images and text from one to the other?

How to place two different indesign documents side by side on my desktop in order to copy and paste images and text from one to the other?

Or choose Window > Arrange > Tile
And, you of course can copy/paste without tiling.

How do i create a background image that i can place objects over (editiabel region)

To whom it may concern:
I apologize my dreamweaver skills are a bit rusty to say the
least-sorry. Anyway, i need to be able to place objects and edit
regions of my website that i have a background image on (i have the
opacity turned down so it appears to be nothing more than a
sillouette). I could really use some pointers. Thanx.

Find the DW executable file (in the Program Files/Macromedia
folder
hierarchy), right click on it, select Version, and tell us
which file
version # you see there, please. It will be something like
6.0.xxxx.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"SUPERSTEVE1000" <[email protected]> wrote
in message
news:fcphk5$k3c$[email protected]..
> Hey dee,
> sorry i cant give u an address yet im still tryin to
work out the bugs on
> my
> template. As i said, its been a few years since i have
used dreamweaver,
> and i
> think that we are using a slightly older version of
dreamweaver (6.0) than
> i am
> used to. Um, could u explain DIV's a little more for me,
u can call me
> directly if u want 4174592295.
>

[CS4][JS] How to place objects in different layout

Similar Messages

Maybe you are looking for