CS4 Multi Camera Re-recording not working!

Ive started using multi camera monitor in CS4 for the first time today.
Have used multi camera in the past a lot in CS3 with no problems.
In CS3 when I made a mistake when switching between cameras I could just go back and it would over write everything as it went along. In CS4 I find that when I go back it splits the clip at the point when I click but following that when the next clip change comes up it does not over write it!
This is highly slowing to my editing process, the help files seems 2 say that it should over write although I cannot get it to do this!
Anyone have any advice?
Thanks in advance
Thomas

Guys your charging premium dollars for you product. event videographers like myslef are phoabing in the mouth, give us somthing to say why Adobe products are more superior than Vegas Edius and other SW.
Unfortunately, we're all just users here an no one works for Adobe*. Also, Adobe does not normally read these fora. You need to contact Adobe with your issues.
As for PrPro not being 64-bit, that has never been stated. It has, for PS, which is the only app. that IS written for 64-bit. The rest are certified to run under Vista-64, but there is a major difference. Sorry that you got confused.
Good luck,
Hunt
* now, it has been whispered that Jim Simon might be an Adobe spy, and that Harm Millaard gets to dine in the Adobe cafeteria, but those reports have not been confirmed.

Similar Messages

  • HT3964 my built-in isight camera will still not work on my macbook pro after completing smc reset.  The green light comes on but no video.

    my built-in isight camera will still not work on my macbook pro after completing smc reset.  The green light comes on but no video. 
    Any Suggestions?

    Restart the computer.

  • My iPhone 5 rear camera was not working, now the rear camera is also not working. I have procured the phone in 2012 from San Fransico. USA Can anyone help me, please?

    My iPhone 5 rear camera was not working, now the rear camera is also not working. I have procured the phone in 2012 from San Fransico. USA Can anyone help me, please?

    No one here can help you. If your phone is no longer under warranty, a third-party repair shop will most likely be your best bet. You can't mail the phone to Apple, in the US, as Apple does not accept international shipments. You could mail it to a friend/relative, in the US, & they could take it to an Apple store for you. Some Apple stores repair iPhones. Otherwise, you're looking at an out of warranty replacement.
    Good luck.

  • My camera  icon is not working on my sms so i cant send picture with sms? what to do?

    My camera  icon is not working on my sms part?
    so i cant send picture with sms? what to do?

    Double tap Home button, delete Camera app in multitask-bar.
    Do a
    Reset: Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Note: You will not lose any data
    By the way, picture go through as MMS not SMS, do you have a SMS/MMS plan with your carrier?
    Have you spoken with them?

  • I have CS5 and a d-600. I would like to use camera raw but not working. I downloaded CR 7.3 and still not working. Do I need to upgrade to CS6 ..or just throw it all out the window and get rid of my d-600 ?

    I have CS5 and a d-600. I would like to use camera raw but not working. I downloaded CR 7.3 and still not working. Do I need to upgrade to CS6 ..or just throw it all out the window and get rid of my d-600 ?

    it allows you to use your cr files, Adobe - Adobe Camera Raw and DNG Converter : For Windows
    Camera Raw: How to use Adobe DNG Converter - YouTube

  • CS4 "Save as Adobe PDF" not working in Mountain Lion

    CS4 Save as Adobe PDF not working in Mountain Lion
    Just bought a new Mac with mountain lion, installed CS4 design premium twice trying to fix this. When you go to "print" then "Save as Adobe PDF" the process fails with a pop-up saying "An error occurred while saving the PDF file". I can still do the standard "Save as PDF" - but that usually results in a file size 10x larger than Save as Adobe PDF so it won't work for me; I need the small file sizes of Save as Adobe PDF.
    When I go to Help > Repair Acrobat Installation it seems to be recognizing a repair needed with Adobe PDF Printer (see screenshot below); but when I go through the repair nothing changes it still won't work.
    Any help is much appreciated!

    "Save As Adobe PDF" works fine in Snow Leopard.
    Thanks for the link, but this is no help - I already have "Save As Adobe PDF" on the menu - the problem is when I click that it errors out...
    I just think its sad that Adobe charges people $2000 and provides zero support for future updates; when I buy an iMac for half that amount of money or an iPhone I get operating system support and bug fix downloads to deal with the latest internet advances for years to come - but Adobe apparently takes your money and says sayonara! Is it really that hard to provide updates on $2000 worth of software for say 24 months??

  • Camera Raw CS6 not working properly

    I have upagraded from Ps Cs5 to CS6.
    I open a file in CR, and modify the exposition. After that, I modify the clarity: immediatly, the exposition goes back as it was before the modification ...
    After the work on CR, I finish the file and go back to bridge: the image is not modified ! But if I dobble click on the same image in bridge, the file is opening in CR with the modifications: so this modifications are note visble on bridge ...
    Some body can help me ?
    I work with the last version of Br and Ps CS6.
    Thanks,
    Michel,   [email protected]

    Thanks a lot, Adriana, it is working ! You are right, it is the Nike plugins responsibility. Everything is OK now.
    Salutations and many thanks from Guadeloupe, French West Indies
    Michel GOGNY-GOUBERT
    Le 4 mars 2014 à 17:42, adriana ohlmeyer <[email protected]> a écrit :
    Re: Camera Raw CS6 not working properly
    created by adriana ohlmeyer in Adobe Camera Raw - View the full discussion
    If you have Nik plugins installed, please check reply # 8 on this thread:
    http://forums.adobe.com/message/6045415#6045415
    Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/6179192#6179192
    Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/6179192#6179192
    To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/6179192#6179192. In the Actions box on the right, click the Stop Email Notifications link.
    Start a new discussion in Adobe Camera Raw at Adobe Community
    For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

  • Yesterday I was able to take photos but around 9pm last night my rear camera stop working. I have reseted my phone and have also restored it and the camera still is not working. Also I have deleted all apps that can have access to the camera.

    Yesterday I was able to take photos but around 9pm last night my rear camera stop working. I have reseted my phone and have also restored it and the camera still is not working. Also I have deleted all apps that can have access to the camera and i have updated the new IOS.What else should I do ? Is this a hardware problem?

    Looks like a hardware issue that will have to be taken to a store

  • Camera function is not working

    The camera function is not working on my iPhone 5 that was only bought on 19/1/2013.  Whne you click on the photo icon on the screen you just see the pictur of the closed shutter.  Does anyone know how I can fix this or have had this happen to them,  Of course I am now out of the 3 months free phone support.  Thanking you in anticipation.

    Restart iPhone: Hold down the Sleep/Wake button and the home button together until the apple logo appears (ignore the ON/OFF slider) then let both buttons go and wait for phone to restart (no data will be lost).

  • Camera, Browser & Maps Not Working

    Hi,
    It been since yesterday my Z10 camera, broser & maps not working.
    Whenever I click the camera icon, it is not even opening.
    Browser icon had changed, it turned to a triangle square & circle.
    Can anyone help me out.
    Thanks,
    Chris

    The update may not have loaded properly, you can reload this way:   http://btsc.webapps.blackberry.com/btsc/viewdocume​nt.do?externalId=KB34045&sliceId=2&docType=kc&noCo​...
    Or do a Security Wipe (Reset to Factory Settings) this way: 
    http://btsc.webapps.blackberry.com/btsc/viewdocume​nt.do?externalId=KB33591&sliceId=2&docType=kc&noCo​...
    Please read both carefully !

  • Multi Level BOm is not working in SAP afs

    Hi Experts,
             I am facing issue in MRP.For multi level bom's ,Requirements is not getting generates.Is there any settings is there to active multi level bom for afs materials.
    please suggest solution
    Thanks and Regards,
    Deepika.

    Hello Deepika,
    As we know AFS materials are planned at SKU level (Grid and stock categories)  you can use AFS MRP (/N/AFS/MD02) only.
    Please refer OSS note Note 981747 - FAQ - AFS Production Planning
    Question 5 Made-To-Order Planning -Multi-Level (MD50) does not work for AFS Materials and Sales Orders containing AFS materials.
    Answer: Made to Order Multi level planning functionality was never enhanced for AFS and hence transaction MD50 is not supported.
    Steps are as,
    1. Create a MTO/PTO sales order for an AFS material.
    2. Run AFS MRP using transaction code /AFS/MD02.
    3. Convert the planned order to production order.
    Best Regards,
    R.Brahmankar

  • Multi-touch trackpad is not working correctly anymore

    My multi-touch trackpad is not working - it stops working after the first 10 seconds.
    It is since today.
    After reboot it works for the first 10 seconds - then it is like it needs to have a few seconds for reaction.
    Any idea for the permanent blocking of the cursor?
    TX
    cany_de

    That's really bizarre! I've been experiencing the same problems. Today my three/four finger multitouch gestures stopped working altogether! Nothing seemed to resolve the problem (restart, shut down, etc).I did however follow your advice of creating a new user account and logging in to see if multitouch works...low and behold, it worked! I then logged off and signed back into my primary user account and multitouch continued to work! This must be a software issue (I'm guessing). I just deleted the temporary user account and everything seems to be working fine. I set up a Genius Bar appointment for tomorrow - I'll see if they have any further suggestions.
    Thanks!

  • I  just upgraded my Macbook (late 2007) into X Lion , but the  multi touch gestures is not working. Is this not compatible with my Macbook?

    I just upgraded my Mackbook (late 2007) into X Lion , but the Multi Touch gestures is not working. Is this not compatible with my Macbook?

    jimmyfromdubai wrote:
    ... do I need to buy a new MAC office?
    A better solution is to try a number of better, free alternatives. Consider
    LibreOffice (donation-supported)
    NeoOffice (free)
    OpenOffice (free)
    I use Apple's Pages ($19.99) as well as OpenOffice and have been completely Microsoft - free for over a year now. Life is better without Microsoft.

  • For  MTO scenario,multi level bom is not working sap afs pp

    Hi Experts,
                  We are implementing MTO scenario for our client. I have maintained  strategy group for FERT is 40 and strategy group for HALB and ROH are 20.
                   For single level BOM , requirements is not getting generates properly.
                  I would like to know What are all the settings is required to create AFS BOM.(single and multi level)
                   Please suggest me.
    Thanks & Regards,
    Deepika.

    Hello Deepika,
    As we know AFS materials are planned at SKU level (Grid and stock categories)  you can use AFS MRP (/N/AFS/MD02) only.
    Please refer OSS note Note 981747 - FAQ - AFS Production Planning
    Question 5 Made-To-Order Planning -Multi-Level (MD50) does not work for AFS Materials and Sales Orders containing AFS materials.
    Answer: Made to Order Multi level planning functionality was never enhanced for AFS and hence transaction MD50 is not supported.
    Steps are as,
    1. Create a MTO/PTO sales order for an AFS material.
    2. Run AFS MRP using transaction code /AFS/MD02.
    3. Convert the planned order to production order.
    Best Regards,
    R.Brahmankar

  • Multi-select LOV does not work in forms

    the multi select LOV does not work in the form.
    the LOV works individually but in the form it does not work. it does not allow multiple selection from the list.
    is there a workaround for this or is this a bug ...?
    any ideas ...?
    thanx a lot.
    null

    Right, we cannot store more than one value in a single column in a table :), we were getting a lot of requests to support multiple select LOVs but requirements were contradictory if not mutually exclusive.
    The only sense it makes is when used together with user-defined object types (nested tables for example) but the current [application building]infrastructure we have does not support this. However, we are looking into this and this feature maybe implemented in a future release.

Maybe you are looking for