CS4 multicam sequence shows only 1 of 3 clips

I have a project that I have been working on for a month and am now having an issue with the multicamera sequence within the project. I am using a 3 camera multi camera sequence and have cut 1 hr. and 30 min. worth of video between all three cameras. I opened the project today and found that despite all my cuts on the multicamera nested sequence I can only see 1 camera in the preview window. All the multicamera clips used to read MC1, MC2 or MC3 and now they do not. They are now labeled as the raw footage sequence from which I created the multicamera nested sequence. When I right click on the clips in the nested sequence they are not multicamera enabled and if I choose to multicamera enable a single clip, all the clips on the entire timeline change to another camera but once again it is the same camera all the way through the timeline. What should I do?
I have tried creating a new project and importing the old project(the project where I am experiencing the problem) into it but there was no change. I also tried right clicking on the cameras in the project panel and replacing them with themselves(the acutal files on my hard drive). Again there was no change. I tried turning on and off the video and audio layers on my raw footage timeline from which I created the multicamera nested sequence and the changes I made were reflected in the clips on the nested sequence. For example, when I turned off all video I could not see any video on the nested sequence. This leads me to believe that they are still linked somehow but the project is still not working properly. I’m using a Matrox Axio LE running on Vista 64bit using Premiere Pro CS4.
Thank you!

Thanks for the reply!
Good news, I was able to find a auto save where all the multi camera are
working correctly. I performed a Save As to a new project which I will work
off of from now on. What do you mean when you say, "I'd lose the Matrox
first?"

Similar Messages

Viewer shows only white when Browser clips selected?

I'm using FCP 7.0.3 on my iMac 10.8.3. I was fifteen minutes into a final edit on my project when my viewer stopped
displaying clips that I have in Browser bins. The Viewer shows only a white screen when clips are clicked. My timeline clips
display ok when clicked. In addition, I cannot see text color in the Viewer although it superimposes on the Timeline fine. I've
restarted and dumped the Library>Preferences> com.apple.RegFinalCutStudio.plist with no results. Anything else I can try without
dumping my project?

Check to see that RGB is checked for Viewer Display settings.
Russ

Multicam sequence in Premier Pro CC not syncing

I created a multicam sequence in PPCC based on audio waveform. I had success with 5 of the 6 clips from 3 cameras. I opened in the timeline and there was absolutly no sync. All the camera angles started at 00;00;00;00 in the timeline which is impossible because they started recording at different times. It's like the sync data just left the building. Any ideas?

Exactly. I don't know. PPCC said it wasn't able to sync one of the 6 clips, so, successfully with 5 of the 6. One would think that upon opening the newly created multicam sequence that you would find 5 clips ready to go. That was not the case. There were 5 clips, they all just started at 00;00;00;00. PPCC said it was successful with 5 of the 6 when in reality the clips were not at all synced. That's the issue.
I was just starting to use Pluralize when PPCC with multicam audio syncing became available. I'll go back to that. I appreciate the press to sync manually, but I have projects in the pipeline that involve more cameras than I'm using now. Whether through PPCC or pluralize, I'd like to have the ability to multicam audio sync.
If anyone comes up with a fix for the issue or has insight to what I'm doing wrong, your comments are much appreciated. I have had success in the past with multicam audio syncing in PPCC. I don't know what changed.

"Making multicam sequence from 3 other sequences" not showing video properly

Well, problem in a nutshell. I created a multicam sequence, using 3 other sequences. But somehow, it's not showing it 100% correctly. Like, the main window shows the video, like it should be, and the smaller windows, are just off sync for some reason (except the only sequence that doesn't have any empty caps on it). Any explanation & fix for this?
Instant workaround that I just invented. I put some empty title on the empty caps, and now It shows it, like it should be in the smaller windows. But if anybody knows why it did it in the first place, would be clad to know.

OK, maybe I should clarify...
Only A2 is coming through, NOT A1 -- so that's inconsistent with what you're saying. I have not checked Audio Follows Video, because that's not the bahvior I want. I'd like to be able to choose from any of the video tracks. Is that not possible in Premiere Pro?
Also, do you think it makes a difference that I'm 'multicam editing' from a regular sequence (with multicam enabled) as opposed to an actual multicam sequence?
thanks for the help.

How to edit only audio tracks in multicam sequences?

How can I cut only the audio track in a multicam sequence? I need it like in Final Cut Pro: Cut both video and audio, cut only video track x while audio track y remains untouched, cut only audio track x while video track y remains untouched. I can't find any solution. I use Premiere Pro CS6. Please don't recommend CC!

Well, that's another nasty problem with multicam editing in PP. It cuts only the video but not both. The audio track is always that of the first selected clip (of that in the first video track) when I create a multicam sequence. I have manually to open it in the timeline, enable or disable certain audio tracks, go back to the sequence and cut. But when I have to switch the audio for only some camera angles it is impossible, because I can only change the audio track for the whole sequence. Or do I miss something? Maybe it is another cool "design feature"?

Premiere Pro CC 8.2 Crashes only with multicamera sequences

After reading all complaints about Crashing, I have to say that I'm very pleased with This version performance, The blue icons Look great.
The software crashes when Multicamera sequences are set to render, and choosing H264 Blu-ray or Quick Time Gopro, in others like Blu-ray MPG2 there is not problem
However I prefer the two codecs with trouble. Also FOUND A WORK AROUND, Is creating the Multicamera sequence, erasing it and using the resulting see in Time line sequence,
and then making the cuts manually, That way it does not crash

I too have problems with audio on CS6.05, I wanted to route my audio thru my digi003 interface, but no avail., tried it on my Presonus light pipe, nada. I have a matrox mojito max and tried to download using it;s vetura capture software, still dropouts. I then went to cineform.com and downloaded the free Cineform Decoder Codec under the downloads file and used it, No more dropouts as of date when using this codec. Its listed as Gopro Cineform 4k/3D/HD codec.
http://cineform.com/gopro-cineform-decoder

Is there a way to view all cameras in the timeline at once without creating a multicam sequence?

Is there a way to view all cameras in the timeline at once without creating a multicam sequence? Is there some kind of window I can open where they will show up? I am scrubbing a timeline and I would like to see all the cameras at once.

The multicam monitor only shows multiple clips at once when they are part of a mutlicam sequence. is there some reason you don't want to use them inside a multicam sequence for previewing?
Here is a possible workaround, if your workflow circumstances will permit it:
Apply a pip preset effect to each clip in the timeline. Use UL, UR, LL, LR presets and up to four video tracks will display at once. If you need to see more than that, you'll need to tweak their position parameters by hand. When you're done previewing them all at once you just need to delete their effects from the Effects Controls panel.
I know it's not that neat or quick, but it will let you see everything at once in the program monitor.

How to preserve multiple mono audio in Multicam sequence?

I'm a new FCP7 -> Premiere convert and seem to be unable to preserve true multiple mono audio in a multicam source sequence.
I have 3 video clips, each with 2 mono audio channels, interpreted correctly as multiple mono (showing as "2 Mon" in Project panel).
When I "create multi-camera source sequence" in project panel using the 3 clips, Premiere Pro Cs6 is creating a sequence with a Master audio track that is stereo. I cannot find a way to converting the stereo Master audio track to multiple mono audio track after the sequence is automatically created. When I look in "Sequence Settings" of the multi-cam sequence, there is no "Tracks" tab that is used to set this up in a new sequence. I have also tried switching all the preferences/audio settings to Mono with no luck.
Note: This problem is NOT related to enabling/disabling the additional audio tracks in the multicam sequence, I understand that only track 1 of a multi-cam sequence is enabled by default.
Thanks,
Robert

When I "create multi-camera source sequence" in project panel using the 3 clips
Don't do that. Do things "old school". Meaning you manually create an "Original" sequence for the 3 clips, add them in and sync them up. You then manually create a second "Multicam" sequence and nest the "Original" into that. Right click and Enable Multicam.
Doing it that way, you'll have the option to specify what type of audio tracks you want for each sequence.

Premiere Pro 5.5 Multicam Sequence Not Playing

So I'm running into an snag with a project I am working on in Premiere. Everything was working fine last night, I just finished up color correction and audio sweetening. However this afternoon when I opened up the project, everything appeared fine (media loaded, no weird error messages), until I tried playing the timeline (edited multicam sequence). Nothing, then when i tried moving the playhead to a different spot in the timeline, it would take about 20sec before the new location would show in the program monitor. I tried playing it and still nothing. I tried opening a clip from my project bin in the referrence monitor and it won't play there either. Nothing happens when I try scrubbing through the video.
I have tried importing only a single sequence into a new project and same issue.. but if I open up a whole different project the video clips play fine. I have also tried creating a new project and importing individual clips that are used in my original project and they play fine there, but the moment I tried importing one of my edited sequences, everything stops playing. The one thing I did discover is if I import one of the original sequences were I synced my my multicam clips, the video plays fine, so it seems like it has something to do with my edited multicam sequences.
Any ideas as to why the edited multicam sequences would not be playing?
Thanks for any advice!

Was messing around with some stuff and just figured it out.
I hope all this makes sense....
I have three sequences:
1. clips synce together (used as my multicam sequence)
2. edited multicam sequence (8min long)
3. edited multicam sequence (2min long)
instead of adjust the audio for each individual clip in both sequences 2 & 3, I had simply adjusted the audio in sequence 1, which then changed the audio in both sequences 2 and 3 appropriately. I didn't think this would have effected anything since I have used the same logic in the past to make my first round of color correction when using a single multicam sequence to edit multiple lengths of as well as the fact that after I first added the eq effect, everything was still working fine till I opened the proejct up the next day.
Apparently that is what was causing the issues, cause I just went in and removed the audio eq effect from sequence 1 and now sequences 2 and 3 play fine.
Fuzzy Barsik- I really appreciate your input and all your advice. Thank you!

How to build a report in Oracle CRM On Demand using the Shared Activities subject area to show only 5 recent activities?

I’m trying to use the Rank function in a report and I’m having issues getting it to work. I’m using the Shared Activities subject area and would like to rank activities by Contact. Since there are multiple activity association to the users (attendees), I’m not getting the correct ranking order. Here is what I tried so far…
RANK(Activity."Task Due Date" By Contact."Contact ID")
RANK(Activity."Task Due Date" By Contact."Contact ID", Activity."Activity ID")
RANK(Activity."Task Due Date" By Contact."Contact ID", Employee."Employee ID")
I don’t mind getting the same values for the same dates but the increment should be in sequence. What I’m getting is 1,1,3,3,5,6,6… I want to show only 5 recent activities and so need the sequence of 1,1,2,2,3,3,4,4… If not date, what else is there to make it unique? I tried to rank it by Contact Id, Activity Id, Emp Id, etc. Nothing works!
I have tried other functions like RCOUNT, TopN, BottomN, ect. with no luck.

Hi Max
Our requirement is to see all the activities for a server in a month ONLY IF there are activities on DIFFERENT dates. So using my example, server2 has activties on 7/1 and 7/14. Then we want to see all the activities for server2 in that month. Server3 has two activities but both activities are on the same date. So we don't want to see server3.
Counting by server will not work because that will include server3 in my example.
What I really want is to be able to count unique occurrences of dates per server in a month. And if this count is > 1, then this server will be in the report.
I used a pivot table to count the unique occurrences of dates by server by month. So using my example, I have this result:
Server1-July: 1
Server2-July: 2
Server3-July 1
What I really want (conceptually) is to be able to filter this pivot table by the matrix column which is the count. I just couldn't figure out how to do that :). Then I thought I could use this report (with pivot table result) as a filter into another report.
Hope you have some idea....:)
Thanks

How to make the report shows only top level steps

HI,
I use many subsequences in my tests. I have no interest to see them in the report. How can I force the report to show only top level steps?
Thanks
Rafi

I needed to prevent 'Skipped' steps from appearing in my reports. One way to do this is to override the SequenceFilePostResultListEntry callback in the model. You do this by clicking on Edit and then Sequence File Callbacks and then find SequenceFilePostResultListEntry in the list and click the Add button.
Edit your new callback in your sequence file to check for a pre-condition. In my case I checked for Parameters.Result.Status == "Skipped" since that parameter is set to Skipped, Done, etc. based on the result.
If the condition was true then my only step in the callback was to set Parameters.DiscardResults = True. The TestStand model will then throw that result away when it processes the report. You could add a step for every type of data you wish to discard.
A second method that is easier to implement, but time consuming, is to select each step you DON'T want in your report and bring up the Properties for that step. Under the Run Options tab, deselect the Record Results box. That will keep the results of that step out of the report, but you have to do this for EVERY step you don't want to have reported. The first approach I provided acts to filter the results.
If you aren't sure what the Parameters.Result.Status will be, then set a breakpoint after that step is executed and scan the parameters when the sequence is halted there. You can then detect the actual text used as a result for that step, such as "Done" and can set your pre-condition appropriately.

Photoshop CS4 Is Not Showing all Formats/Extensions when saving. [was: Please Help]

My Adobe Photoshop Cs4 Is Not Showing all Formats/Extensions.
when i edit a picture and wants to save in .png or .bmp or in any other format ...
there is no .png In the Save As List, There are only Some Extenstions in that list like Jpeg-Psd-Tif etc...
I Made The Picture in RGB mode..
And I have Png.8bi Present In my AdobePhotoshop/Plugins/File Formats
But It Is Still Not Showing Can you guys help

Thanks For The Reply ... Let Me Answer your questions
Os = Windows ( windows xp )
Bits = 8 bits / Channel
I didn't Understand your this question
=> If On Windows is it the same in both the 32 and 64 bit versions of Photoshop cs4?
System Info :-
Adobe Photoshop Version: 11.0 (11.0x20080919 [20080919.r.488 2008/09/19:02:00:00 cutoff; r branch])
Operating System: Windows XP 32-bit
Version: 5.1 Service Pack 3
System architecture: Intel CPU Family:15, Model:2, Stepping:9 with MMX, SSE Integer, SSE FP, SSE2
Physical processor count: 1
Processor speed: 1394 MHz
Video Card: Intel(R) 82845G Graphics Controller
Video Mode: 1152 x 864 x 4294967296 colors
Video Card Driver: ialmrnt5.dll
Driver Version: 6.13.01.3264
Built-in memory: 2046 MB
Free memory: 1497 MB
Memory available to Photoshop: 1586 MB
Memory used by Photoshop: 70 %
Image cache levels: 4
Serial number: 92628791954238016438
Application folder: D:\CS4\Photoshop CS4\
Temporary file path: C:\DOCUME~1\ADMINI~1\LOCALS~1\Temp\
Photoshop scratch has async I/O enabled
Scratch volume(s):
Startup, 39.1G, 32.0G free
Primary Plug-ins folder: D:\CS4\Photoshop CS4\Plug-ins\
Additional Plug-ins folder: not set
Installed components:
   ACE.dll   ACE 2008/08/27-18:10:41   53.355610   53.355610
   AdobeLinguistic.dll   Adobe Linguisitc Library   4.0.0
   AdobeLM.dll   AdobeLM   3.0.11.10077 (BuildVersion: 53.352460; BuildDate: Tue Jul 29 2008 16:47:08)   53.352460
   AdobeLM_libFNP.dll   FLEXnet Publisher (32 bit)   11.5.0.1 build 57427
   AdobeOwl.dll   Adobe Owl 2008/08/14-18:38:42   2.0.70   53.354161
   AdobeOwlCanvas.dll   Adobe Owl Canvas   2.0.70   53.354161
   AdobePDFL.dll   PDFL 2008/08/20-20:15:08   53.204060   53.204060
   AdobeUpdater.dll   Adobe Updater Library   6.0.0.1452 (BuildVersion: 52.338651; BuildDate: Wed Apr 16 2008 19:28:20)   52.338651
   AdobeXMP.dll   Adobe XMP Core   4.2.2   53.352624
   AdobeXMPFiles.dll   Adobe XMP Files   4.2.2   53.352624
   AdobeXMPScript.dll   Adobe XMP Script   4.2.2   53.352624
   adobe_caps.dll   Adobe CAPS   2,0,99,0   2.135373
   AFlamingo.dll   AFlamingo 2008/07/09-11:28:44   53.350580   53.350580
   AGM.dll   AGM 2008/08/27-18:10:41   53.355610   53.355610
   ahclient.dll    AdobeHelp Dynamic Link Library   1, 3, 12, 0
   aif_core.dll   AIF   1.0   53.352475
   aif_ogl.dll   AIF   1.0   53.352475
   amtlib.dll   AMTLib   2.0.1.10077 (BuildVersion: 53.352460; BuildDate: Tue Jul 29 2008 16:47:08)   53.352460
   amtservices.dll   AMTServices   2.0.1.10077 (BuildVersion: 53.352460; BuildDate: Tue Jul 29 2008 16:47:08)   53.352460
   ARE.dll   ARE 2008/08/27-18:10:41   53.355610   53.355610
   asneu.dll    AsnEndUser Dynamic Link Library   1, 6, 0, 8
   ATL80.dll   Microsoft® Visual Studio® 2005   8.00.50727.762
   authplay.dll
   AXE8SharedExpat.dll   AXE8SharedExpat 2008/06/11-20:19:53   NFR 53.348206   53.348206
   AXEDOMCore.dll   AXEDOMCore 2008/06/11-20:19:53   53.348206   53.348206
   Bib.dll   BIB 2008/08/27-18:10:41   53.355610   53.355610
   BIBUtils.dll   BIBUtils 2008/08/27-18:10:41   53.355610   53.355610
   cg.dll   NVIDIA Cg Runtime   2.0.0015
   cgGL.dll   NVIDIA Cg Runtime   2.0.0015
   CoolType.dll   CoolType 2008/08/27-18:10:41   53.355610   53.355610
   data_flow.dll   AIF   1.0   53.352475
   ExtendScript.dll   ExtendScript 2008/07/17-13:28:24   53.351316   53.351316
   FileInfo.dll   Adobe XMP FileInfo   4.2.2   53.352624
   FNP_Act_Installer.dll   FLEXnet Publisher (32 bit)   11.6.0.1 build 60959
   icucnv36.dll   International Components for Unicode 2008/03/20-16:33:10    Build gtlib_1.1 CL#7223
   icudt36.dll   International Components for Unicode 2008/03/20-16:33:10    Build gtlib_1.1 CL#7223
   image_flow.dll   AIF   1.0   53.352475
   image_runtime.dll   AIF   1.0   53.352475
   JP2KLib.dll   JP2KLib 2008/06/11-20:19:53   53.100857   53.100857
   libifcoremd.dll   Intel(r) Visual Fortran Compiler   10.0 (Update A)
   libmmd.dll   Intel(r) C Compiler, Intel(r) C++ Compiler, Intel(r) Fortran Compiler   10.0
   mfc80.dll   Microsoft® Visual Studio® 2005   8.00.50727.762
   mfc80CHS.dll   Microsoft® Visual Studio® 2005   8.00.50727.762
   mfc80CHT.dll   Microsoft® Visual Studio® 2005   8.00.50727.762
   mfc80DEU.dll   Microsoft® Visual Studio® 2005   8.00.50727.762
   mfc80ENU.dll   Microsoft® Visual Studio® 2005   8.00.50727.762
   mfc80ESP.dll   Microsoft® Visual Studio® 2005   8.00.50727.762
   mfc80FRA.dll   Microsoft® Visual Studio® 2005   8.00.50727.762
   mfc80ITA.dll   Microsoft® Visual Studio® 2005   8.00.50727.762
   mfc80JPN.dll   Microsoft® Visual Studio® 2005   8.00.50727.762
   mfc80KOR.dll   Microsoft® Visual Studio® 2005   8.00.50727.762
   mfc80u.dll   Microsoft® Visual Studio® 2005   8.00.50727.762
   mfcm80.dll   Microsoft® Visual Studio® 2005   8.00.50727.762
   mfcm80u.dll   Microsoft® Visual Studio® 2005   8.00.50727.762
   MPS.dll   MPS 2008/07/07-10:33:04   53.350311   53.350311
   msvcm80.dll   Microsoft® Visual Studio® 2005   8.00.50727.762
   msvcp71.dll   Microsoft® Visual Studio .NET   7.10.3077.0
   msvcp80.dll   Microsoft® Visual Studio® 2005   8.00.50727.762
   msvcr71.dll   Microsoft® Visual Studio .NET   7.10.3052.4
   msvcr80.dll   Microsoft® Visual Studio® 2005   8.00.50727.762
   pdfsettings.dll   Adobe PDFSettings   1.04
   Photoshop.dll   Adobe Photoshop CS4   CS4
   Plugin.dll   Adobe Photoshop CS4   CS4
   PlugPlug.dll   Adobe(R) CSXS PlugPlug Standard Dll (32 bit)   1.0.0.73
   PSArt.dll   Adobe Photoshop CS4   CS4
   PSViews.dll   Adobe Photoshop CS4   CS4
   registration.dll   Registration   2.0.1.10077 (BuildVersion: 53.352460; BuildDate: Tue Jul 29 2008 16:47:08)   53.352460
   SCCore.dll   ScCore 2008/07/17-13:28:24   53.351316   53.351316
   shfolder.dll   Microsoft(R) Windows (R) 2000 Operating System   5.50.4027.300
   VersionCue.dll   Adobe VersionCue   4.0.0.0client1
   WRServices.dll   WRServices Friday May 30 2008 7:18:42   Build 0.7713   0.7713
Installed plug-ins:
   ADM 3.11x01
   Accented Edges 11.0
   Angled Strokes 11.0
   Bas Relief 11.0
   Chalk & Charcoal 11.0
   Charcoal 11.0
   Chrome 11.0
   Colored Pencil 11.0
   Conté Crayon 11.0
   Craquelure 11.0
   Crosshatch 11.0
   Cutout 11.0
   Dark Strokes 11.0
   Diffuse Glow 11.0
   Dry Brush 11.0
   Embed Watermark 3.0
   Film Grain 11.0
   Filter Gallery 11.0
   Fresco 11.0
   Glass 11.0
   Glowing Edges 11.0
   Grain 11.0
   Graphic Pen 11.0
   HDRMergeUI 11.0
   Halftone Pattern 11.0
   Ink Outlines 11.0
   Lens Blur 11.0
   Lens Correction 11.0
   Liquify 11.0
   Mosaic Tiles 11.0
   Neon Glow 11.0
   Note Paper 11.0
   Ocean Ripple 11.0
   Paint Daubs 11.0
   Palette Knife 11.0
   Patchwork 11.0
   Photocopy 11.0
   Plaster 11.0
   Plastic Wrap 11.0
   Poster Edges 11.0
   Read Watermark 3.0
   Reticulation 11.0
   Rough Pastels 11.0
   Save for Web & Devices 11.0
   ScriptingSupport 11.0
   Smudge Stick 11.0
   Spatter 11.0
   Sponge 11.0
   Sprayed Strokes 11.0
   Stained Glass 11.0
   Stamp 11.0
   Sumi-e 11.0
   SuperPNG 2.0
   Texturizer 11.0
   Torn Edges 11.0
   Underpainting 11.0
   Vanishing Point 11.0
   Variations 11.0 (11.0x001)
   Water Paper 11.0
   Watercolor 11.0
Plug-ins that failed to load: NONE
Flash: 0
Installed TWAIN devices: NONE

How to edit a clip in a multicam sequence (CS6)?

I am using Premiere CS6 on Mac, I have a multicam sequence set up (2 cam).
I just want to color correct cam 2 to match cam 1 and I cannot figure it out. Everything I try applies the correction to the entire sequence.
If someone can provide exact steps to apply color correction to one clip in the sequence only (it's just brightness/contract, nothing complicated), so that it's reflected in the multicam sequence I'd be grateful. Even a link to a tutorial would be good as I cannot seem to find it online (almost everything points to CC which I don't use and is totally different than CS6).
Please help!

Ok, I finally figured it out, no thanks to Adobe's crap "Help" system, which is missing MANY steps...
1. Right-click the Multi-Camera Source Sequence in the Project tab (NOT the multicam sequence you're editing). It's the one with the green/blue lines perfectly lined up.
2. Choose Open in Timeline.
3. In the Timeline, make the edits you want to the clip you want (in this case, Brightness/Contrast on clip 2)
4. Go to Window > Multi-Camera Monitor
5. You'll see your source clips stacked in the window, and you can fine tune from here.
6. Click on the Multi-Camera Sequence you're editing in the Timeline, and the Monitor should update to reflect your changes.
You can toggle back and forth between these sequences in the timeline, adjusting as you need.
This was incredibly easy for me to document, I really fail to understand why the Help file couldn't be bothered. It's completely missing things like what the difference is between the source multicam sequence and the program multicam sequence, how to edit a clip in your multicam sequence, and how the multicam monitor works. Really pisspoor documentation, but at this point, I don't expect anything else from Adobe.

Making sub-clips in a multicam sequence

Hi,
I used two cameras conducting while conducting an interview, and I'd like to be able to make sub-clips of the parts I want to use of my multicam sequence. Is that possible?
Warm regards,
Bob Fischer

I have a similar issue. I have a two camera shoot that I have synched up. I haven't done the multicam edit yet.
It is of a museum exhibit opening gala. So, there is a linear timeline of singers, speakers, singers, speakers.
< Clip One --singers -- singers -- speaker -- speaker -- speaker -- singers -- singers -->
< Clip Two --singers -- singers -- speaker -- speaker -- speaker -- singers -- singers -->
What I need to do is to take the footage - 35 Minutes - and trim it down to 3 minutes. What I need to do is show singers doing one song (multicam) then fade out the audio, bring up b-roll footage and audio, bring back in singers, fade out singers and bring in speakers (singers as backround audio while speaker speaks) and - this important - speakers are part of the two clips that make up the entire multicam sequence.
So, I could multicam everything first and then use that footage as my basis for cutting, adding b-roll and cutting entire speeches, songs, etc.
Or, I could set markers in the original multiclip synched sequence marking the beginnings of each "event" I could use the razor tool and start hacking it up and sliding it around. Then resynch all cut clips from the two sequences and multicam from there.
Is this clear at all?
Thanks.

Multicam Sequence Error

I have a 3-camera multicam sequence that is 26 minutes long. I've gone through and edited the sequence, cutting between cameras. But for some reason when I close my session and reopen, the sequence changes at 15:48. What happens is that camera 2 and 3 are dropped, and camera one becomes a freeze frame. The first part of the sequence is fine, but it just changes at 15:48 every time.
I can't figure out why this is happening, and I've already re-cut the sequence twice only to have the same problem. Anyone else experienced this before?

There does seem to be a bug with multicam and Premiere Pro CC.
http://forums.adobe.com/thread/1236698?tstart=60

CS4 multicam sequence shows only 1 of 3 clips

Similar Messages

Maybe you are looking for