CS4 - no audio when importing an avi or mpeg

Hello I am trying to figure out why there is no audio when I import an avi created with Fraps. The audio is in the avi made from Fraps but when I import it to premiere pro CS4 - there is no audio during playback. I checked all the audio hardware settings, I dont know what else to do.

While not particularly FRAPS, this ARTICLE will give you some pointers on other video-capture programs.
As John points out, there are several FRAPS threads to draw from too.
Good luck,
Hunt

Similar Messages

  • How do I get audio back on single clip that loses audio when imported into Premiere Pro CC?

    I've got one clip out of many that for some reason won't play any audio when imported into Premiere Pro.  I am new to Premiere Pro so am hoping it's something stupid I've done, but this is a problem with just a single clip exported the same way as all my others, the original audio is loud (not quiet) and none of the FAQ issues seem to apply (ie I haven't muted the audio or anything stupid like that)
    The clip was exported from Plural Eyes into a "master" Premiere Pro project where the audio is fine. I exported it as a short MP4 clip and if I play the clip in Windows Media Player the audio is there loud and clear.
    But when I import the clip into a fresh Preimiere Pro CC project this clip appears with just the "film strip" icon on the far left in the Timeline panel, unlike other clips which have an icon that shows "film strip" in the background and "audio wave" in the foreground.
    I'm hitting so many glitches with the CC editions of Premiere Pro and After Effects which have annoying inconsistencies between them I'm tempted to just go back to Sony Vegas Pro (single program, no hassle) but hoping most of these issues are down to "newbie incompetence". Very hard to understand why this one clip out of many should be giving me this specific problem though. Any ideas?

    I'm getting so many weird results. Most go away by simply closing the project and re-opening and I only have 6GB memory but even so, I'm disappointed by what I thought was supposed to be more "world class" video editing software than Sony Vegas Pro which I found to be a lot more stable. Also struggling with differences between Premiere and After Effects. Every time I want to do something in Pro I seem to need to go to After Effects and vice-versa. After Effects lets me do more of what I could "just do" in Vegas Pro timeline, but it's hideous for lining up audio and having to render anything in RAM to even get a clue as to what a change has done.  Need to add Audition to the long list as well I suspect. Fun times!

  • No audio when importing AVCHD into FCP X?  Simple solution.

    After hours of trial and error and several phone calls to support, I figured out why my AVCHD footage (MTS files from a Canon vixia HF S100)  had no audio when importing into FCPX.  The solution was to simply uncheck the box - "Remove silent channels" - under Audio in the pop-up import window .  That did the trick. 
    I had tried  importing from a card reader, the camera and from an external hard drive and then tried 2 converter programs (MPEG streamclick and   Wondershare Video Conerter Ultimate.)
    Final Cut Pro X
    OS X 10.8.2

    It's usually something simple that can catch the best of us.
    Al

  • No audio when importing footage under capture

    When I'm importing footage from my camcorder into FCE there is audio in the caputure window & no levels on my audio meters. The camcorder I'm using is a ZR500 Mini DV using to import.
    These are the steps I have done: File -> Easy Setup then Format: -> (all formats)
    after that Use: DV-NTSC Firewire Basic.
    Then I went to File Capture. Any advice? I'm getting no audio when importing on
    FCE 4?

    Welcome aboard idw3,
    Then I went to File Capture. Any advice? I'm getting no audio when importing on
    FCE 4?
    That's normal for FCE. All versions have been the same. If you need to hear the audio use the cameras headphone socket if it has one.
    All audio can be adjusted in the Timeline during editing as required.
    Al

  • Audio when importing AVI in Premiere Pro 2.0

    Hi everyone,
    I'm a bit of a n00b at Premiere 2.0, but I'm slowly learning. When I import an AVI recorded with Bandicam, and try to play it, the video is fine, but the audio comes out as a constant high-pitched whistle, low rumbles, and other odd and garbled sounds, with no hint of the original audio. Can anyone help me with this? Using a clean install of Premiere Pro 2.0 with Windows 8.1.

    >AVI recorded with Bandicam
    AVI is a wrapper, what is inside YOUR wrapper - Exactly what is INSIDE the video you are editing?
    Codec & Format information, with 2 links inside for you to read http://forums.adobe.com/thread/1270588
    Report back with the codec details of your file, use the programs below... A screen shot works well to SHOW people what you are doing
    https://forums.adobe.com/thread/1070933 for screen shot instructions
    Free programs to get file information for PC/Mac http://mediaarea.net/en/MediaInfo/Download
    Does your video use a VARIABLE Frame Rate or a Constant Frame Rate?

  • No video, only audio when importing .avi file into CS2

    I recorded 920p footage on a GoPro Hero 3 at 50fps. GoPro recordes MP4 files, I wanted to edit the footage in PP CS2 as it gives me more control than GoPro studio.
    I used GoPro Studio to convert the MP4 files into avi files and amended the white balance and saturation etc, as I recorded using Pro Tune which gives a flatter colour profile.
    The avi files run well in Windows Media Player (although don't seem to have the clarity of video's on the GoPro website!)
    I have then imported the avi files into CS2 to put together the edit and I can only hear the audio and can't see the video in the source stream or the program stream.
    I assume I have a setting wrong in CS2, could any one advise what I need to change to get the problem rectified?
    I was planning on exporting the finished problem at 720p if makes a differance

    Also, CS2 has a different forum http://forums.adobe.com/community/premiere/premierepro_previous

  • Gaps in audio when importing clips?

    When I try to import clips from my camcorder to imovie, quite often it happens there are little gaps with no sound (easy to hear, and visible in audio wave as gaps as well).
    When I connect the camcorder to the TV set, then the sound is fine, thus assume it cannot be a mistake in recording.
    I've also exchanged the firewire cord, still the problem continues...
    Would be extremely grateful for any help...

    Hello BCRC,
    What make / model computer are you using?
    What operating system?
    What program are you using to burn the DVD's and CDs?
    By gaps are you meaning that there is a gap from one track to the next and you are looking to burn gapless discs, or are you referring to the audio actually skipping parts of the audio when burning?
    If I have helped you in any way click the Kudos button to say Thanks.
    The community works together, click Accept as Solution on the post that solves your issue for other members of the community to benefit from the solution.
    - Friendship is magical.

  • No Audio when Importing?

    Can anyone let me know if there's a way of getting the audio to work when importing... it always used to work before in previous versions of iMovie... is there some setting I am doing wrong... whether it's on Manual or Automatic... the footage imports silent.
    Any comments most welcome.
    Regards,
    Anthony

    Because I was using an old camera (without firewire) I had to capture with my PC using DVD Director Pro. That works great, thanks<<</div>
    You have no DV device for working with FCP? No camcorder, deck or converter? If you do, connect the analog outs of the old playback device to the analog inputs of your DV device, then connect a Firewire cable from the DV device to your Mac. Set FCP's capture control to "Non-Controllable Device" and hit Capture Now. This method works fine for everyone I know for capturing virtually any analog format (VHS, 8mm/Hi8, BetaMax, 3/4", etc). You'll have much better quality than going to MPEG first, and if you have a TBC lying around to run the analog signal through, you can get some rock-stable footage.
    -DH

  • No Audio When Importing MOV into LifeType

    Hi
    I'm new to FCE and I was importing a mov file into life type. However, there was no audio when I tried playing the file. I am able to see the visual and the live fonts effects but somehow the audio is missing.
    Did I miss something ? Is this the right approach for creating a movie with LiveType effects ?
    Jojos
    P.S: The mov itself has audio when played via Quicktime.

    if I may ask for the steps I would be doing the following ?
    1. Create the titling effect in LiveType
    2. Export it to a quicktime movie
    3. Open FCE4 and superimpose it into my main movie clip
    4. Generate it as movie
    In step 2, do I render a movie or generate it as a quicktime movie? May I know what's the difference and which offers a better quality ?
    Appreciate your reply.
    Jojos

  • No Audio when imported and played on the timeline

    I imported with a panasonic DVM100B using a canopus ADVC-100 and RCA cables I have ordered a 9pin to 4pin firewire.. The capture files plays video and audio from Quick Time and will play when put in iMovie. The audio will not play when imported into Final Cut Studio HD upgrade and placed on the timeline. The Audio track shows peaks when open and the audio meter shows movement when playing the track.
    Any suggestions

    Thanks for the info. I went back to the audio and video settings and the audio output and playback is now on default. It is working except I had to render all imported files.

  • CS4 Windows problems: crash very often, stuck when import certain avi files

    The followling problems are in CS4 (newer updated) Windows (Windows XP SP3):
    I am using Premiere Pro in CS4 and the program crashes so often (it crashes more than 10 times in one afternoon). It usually starts when I place clip, photoshop file, or other assets to sequence. If it starts leave a lot of frames while I pull the asset (there will be the same frame over the path my mouse went), it is a signal to crash soon. After it restarts, it usually loses the last saved information (even I saved the project way before it crashes). I do not know whether other users see the similar behavior.
    The second problem does not look like only for CS4. It happens in CS3 too. When I place an AVI file (not sure whether other format behaves the same), the import program will stuck in the end (while it shows "generate peaks from xxx.avi"). It will take forever and I never successfully finish importing the file. I worked around and realized it only happens to the avi files I captured from Movie maker (use Auto capture option). The avi file can be played in Windows Media player. If I use Movie maker to cut the end of the avi file, the new avi file can be imported to Premiere without any problem. It seems the last few frames in the captured avi file has problem so the import subfunction will stuck there. I am not sure whether this is the case. If it is, the program should be "SMART" enough to go on or ignore the bad frames.
    Any idea?

    Thanks, Harm. This brings to another problem I had. While I am using PR to capture DV from my two mini-DV cameras, sometimes it just generates a lot flicks or "snow" in the avi files. But with Movie Maker, the same tape will not have such problem. This is why I am using Movie maker to capture the movie since it is accessible beside PR. It seems the PR problem is only for the last few frames so I just cut the last few frames off. I do not know why PR cannot just generate an Error message to UI so we will not just wait there for hours. I did some programming to control many instruments and I understand I cannot project every problem the program will encount, but at least I can generate an error message to tell the user where the problem is. Is this the fundmental guideline for programmers? If PR does like the format, let us know when it reads. It is very frustrated while you wait there hours and hours without any idea why it stucks!

  • No audio when imported

    I am using premiere pro 2 now.  I shoot in Sony handycam with HDD.  When I copy the footage files to my computer and import them to premiere pro 2, it works fine.  Audio and video work perfect.  When I import the same files to premiere pro cs3, the audio does not work.  My files are in MPG2 format.  The same problem happened with cs4 and cs5.  Anyone please help me.

    Welcome to the forum.
    What is the Audio CODEC in those files, AC3 perhaps?
    If it IS AC3, then you will need to go to your Encore CS 3 installation, and locate the AC3 .dll file (do not have that exact name handy, but it is different than the one in EncoreDVD 2.0. Copy that to the PrPro CS 3 root folder, and the AC 3 material should then play.
    If it is AC3 and worked in PrPro 2.0, it is likely that at some time, you copied that .dll into PrPro 2.0's root folder.
    As of about PrPro CS 4.2, that .dll file was installed in PrPro, so the AC3 issue became moot.
    If your Audio CODEC is something else, please let us know what that is.
    Good luck,
    Hunt

  • No audio when importing .M2TS video file into PP

    Hello hopefully someone can give some insite to why I'm having this problem. I'm using the Hauppauge HD PVR to capture HD footage from my DVR
    and I'm getting mixed results when I import into PP. The video is fine and sometimes the audio works and other times it doesn't, I let PP comform the file before I try editing it. The captures are @1920 x 1080 in 5.1 audio, if I capture with just 2 channel audio I have no problem and everything is fine but capturing 2 channel audio kinda defeats the purpose of doing highdef to Bluray. When I view the same file that doesn't have audio in PP with a player everything plays and sounds fine, so I know the capturing process is fine. Any suggestions would appreciated!

    Welcome to the forum.
    First, what version of PrPro are you using?
    In earlier versions, pre-CS4.1, you need to copy the AC3 .dll from Encore to PrPro, to use AC3 Audio. In CS4.1 - CS 4.2, that is no longer necessary.
    Now a note on Exporting DD 5.1 SS. You will need the Minnetonka SurCode DD 5.1 SS plug-in. You get 3 trials of it, then must purchase it to Export as DD 5.1 SS. If you go this route, purchase from within PrPro, as you will get an Adobe-user discount of ~ US$50. If you buy from the Minnetonka Audio site, you'll pay full price.
    Also note that Hauppage might not create 100% DVD/BD compliant DD 5.1 SS. That could be an issue too.
    Good luck,
    Hunt

  • No audio when exporting as AVI

    I am having a problem exporting AVI's with flash cs4 when the sound is embedded in a movie clip. I get video but no audio. If the sound is on the main timeline, it works.
    When I create a SWF or export as a MOV using movie clips with audio in them, there is no problem, either.
    The problem is only with  AVI's with audio in the movieclips. I don't think it has anything to do with the files I'm creating because all of my movies do the same thing.
    I am sure it is just something I am doing wrong. Thanks.

    I believe that MovieClips don't play in the AVI renderer.  You will need to pull the things that are inside of MovieClips out to the main timeline to get this to work.
    Or, you can export as a MOV, and then convert it to an AVI.
    There is a free webservice that can do this conversion if you don't have the means to do it yourself:
    http://media-convert.com/

  • .mts files out of sync audio when importing in Premiere Pro CC

    When I import .mts files from my nxcam in Premiere Pro CC, the audio of the clips in not in sync. Can anybody help me with this issue? Thank you!

    Hi,
    Please try renaming one of the footages from .mts to .m2ts and then import in Premiere. See if that helps.
    Regards
    Sarthak

Maybe you are looking for

  • Cannot delete itunes .msi not found and cannot install new one! please help

    Please help me awhile ago i tried deleting then reinstalling th new version of itunes / quick time and after going through most of the installation process this comes up: The feature you are trying to use is on a network resource that is unavailable.

  • File system getting full and Server node getting down.

    Hi Team, Currently we are using IBM Power 6 AIX operating system. And in our environment, for development system, file system is getting full and development system is getting slow while accessing. Can you please let me know , what exactly the proble

  • No More Resource problem

    Hi: I have a J2EE application using Connection Pool and JDBC. I am using Weblogic 6.1 and JDK 1.3.1. I am running into a 'No More Resource' problem. I did some debugging and think the cause is due to all my 80 database connections are used up so no n

  • Variable Refresh button in WAD

    Hi All, I would like to add a button to a web template so that after I execute the report I would like to click on the button and the variable screen pops up enabling the user to select alternative values. I am working in BI 7 and would like to know

  • Warning Message in Safari 3.1.2.

    I have downloaded and started to use Safari V3.1.2 hoping it might resolve a former problem - but no luck there!. I still get a warning message when approaching my Inbox email system which says "Your browser isn't fully supported. You're using the ap