CS4 not exporting audio with video

For a while now I've been working on a video for my class, mish-mashing together a bunch of smaller .avi files into a cohesive whole. Everything inside of Premier works perfectly. I edited the audio tracks with Soundbooth, so now they are .wav. When I export the video, first I tried MPEG4 and messed around with a lot of settings. After this didn't work, I searched around and discovered that Premiere occasionally doesn't like it when you change the pre-set settings, so I switched to H.264 High Quality and exported with that. Same deal: the video works fine, no audio. And yes, I made sure to check the box that says "audio and video" and not just video.
In short: How do I get Premiere CS4 to export my audio and video when I tell it to?

I used no special setting. I even tried to just export audio. Still no audio. I checked the file with GSpot, it shows that it has audio.
Then I though I just went ahead an encode this and output to DVD as a test. It is indeed still no audio when playback on home dvd player.

Similar Messages

  • FCPX XML not exporting audio with project...

    FCPX XML not exporting audio with any project.
    I have tried with several different projects to no avail.
    Any thoughts or suggestions?
    Thanks

    I used no special setting. I even tried to just export audio. Still no audio. I checked the file with GSpot, it shows that it has audio.
    Then I though I just went ahead an encode this and output to DVD as a test. It is indeed still no audio when playback on home dvd player.

  • Quicktime 7 Pro: Demuxed MPEG-2 Won't Export Audio With Video

    Hi,I'm trying to create .MP4 files from my camera's multiplexed MPEG-2 files. I have used MPEG Streamclip to split audio/video and save the resulting files in .MOV format. Then, after editing in QT 7 Pro, I want to export the separate audio and video in a single MP4, but have been unable - I can export either audio or video, but not both. The export options allow only selection of audio or video.
    It seems like this should be a really simple issue, but I can't figure it out...

    There is not a version "just" for Intel. There is one for QT6.3 and earlier and one for 6.4 and later and the latter one includes Intel macs. E.g. it also works on PPC macs with QT 6.4 or later.
    I have that one on an Intel mac, didn't upgrade a thing from the files and programs transfer from a Powerbook G4 and it works fine.

  • Exporting audio with video like it was recordedw

    We have shot a ton of video with the dvx-100 and 100a. sometimes final cut captures it weird and i'll have a -03:37 or whatever sync problem. If there is an easier way tell me, i want to export the video after i sync it so I can reimport it and just cut it from there. Or is there another way to do this?

    I already synced it,
    Ah. Good for you.
    now i want to export it to a format which can have two mono tracks instead of a mixed pair.
    That's not really the issue. The issue is how your target app will handle the two tracks. Where are you going with the file? Usually you'd just pan both tracks to separate L and R. Then, even though theyare being mixed by your playback app, they're still separated.
    One of the channels has a tram on it, which i need, the other is just room tone(camera mic) .
    So you don't need both? Or you want to be able to mix them separately in the next app?
    the audio was recorded with two mono channels, I need the same with the export.
    Not easy to grasp what you want form this post, glad you made a second shot at trying to ask the question. but you still haven't offered up enough information yet.
    bogiesan

  • Calibrated{Q} MXF Import not linking audio with video automatically

    Dear all,
    I am trying Calibrated{Q} MXF Import demo for Mac to import my old MXF files used for Avid system before to FCP. As the files were set for Avid, so the P2 file structure no more exists, and I have to import the file directly from the Avid MediaFiles/MXF/(number) folder.
    Yet, when I import a video MXF file into FCP, it doesn't automatically link the audio. I did put a tick mark next to Join Audio Files to Video in Calibrated{Q} MXF Options.
    Did I make any mistake, or I just have to put all five video and audio files together on a sequence to sync up myself?
    Thank you very much.
    Best regards,
    King

    the company told me that as the P2 file structure is gone, the audio files won't be automatically joined the video file. In other words, I have to sync them up by myself.
    Thanks.
    King

  • Problems with exporting audio music video to QuickTime

    In iMovie I made this audio music video, combining music with photos and audiovisual clips. In iMovie I muted the original sounds of the photos and audiovisual clips. Yet after exporting the audio music video to QuickTime, parts of the original soundtrack can still be heard, some of it in the right place, some are scattered out at random. I have exported audio music videos from iMovie to QuickTime before - consisting of music and audiovisual clips - and then I had not theses issues. Can somebody explain to me what I can do to mute the original soundtrack in QuickTime? I don't want this original soundtrack to spoil the audio music video when I upload it to Youtube.
    Thanks in advance

    There is a bug in iMovie 09 that produces weird audio artifacts when you use speed changes (fast or slow motion) that do not conform to the preset tick marks of 25%, 50%, 100%, 200%, 400%, 800%, etc.
    If you are using custom speed percentages like 58% or 139%, change them to one of the presets, and that will fix the sound.

  • Premiere not exporting audio files with the footage

    Hello All, has anyone had trouble lately with Premiere not exporting audio files with the footage?

    1st, show your export screen so people may see what you are doing
    https://forums.adobe.com/thread/1070933 for screen shot instructions
    2nd, when you ask a question you need to provide more information for anyone to try and help
    -Premiere Pro Video Editing Information FAQ http://forums.adobe.com/message/4200840

  • After ATV2 5.0 update Netflix audio is not in sync with video

    As the title says, on ATV2 after the 5.0 update, Netflix audio is not in sync with video.
    Anyone else seeing this?

    I spoke tooo soon.
    Netflix audio is not in sync with video today as well. Any movie, it happens to all.

  • Exporting audio and video together for Mpeg2 dvd

    Hi, I'm trying to export audio and video together for Mpeg2 dvd.. I changed  multiplexing to DVD but is still exporting seperately is there something im missing? thanksa

    To add, with Multiplexing set to NONE, check what the Audio format is set to. If "PCM", this is an uncompressed .wav file and will result in export of .m2v video and .wav audio (I think Mac uses .aif) and use "Import as Timeline" in Encore for both clips at once. Encore will automatically transcode the audio to Dolby AC-3, do NOT mess with settings in Encore, defaults are correct. If you have CS6, then in AME audio settings, there is an option for Dolby and you can use that to create the .ac3 audio and then Encore does NOT do any transcoding to audio or video. Note that older versions will also show "Dolby" but that is a free trial of a surround encoder, not the same. You just want the stereo option available in CS6, or use PCM option is fine
    Thanks
    Jeff Pulera
    Safe Harbor Computers

  • Logic 8 Export Audio to Video using Pro Tools HD hardware

    Hello everyone,
    I am having problems with the "Export Audio to Video" Function in Logic 8. Logic will go through the export process just fine, but when I open the export elsewhere with logic closed there is no audio. The video plays fine. I have read that this function was broken in logic 7, and doesn't work with intel based macs. BUT, I am using logic 8 with a Power PC. One thing that might have an effect on this is we are not using the standard core audio driver. We are using our digidesign HD Hardware(Sync I/O, two 192 I/O's) for recording and playback. I set this in the audio prefs by choosing DAE as our audio driver. Im guessing this has something to do with the audio not bouncing out, or bouncing out to some weird unknown location and I cant find it. we have figured out a work around, but its time consuming and not so accurate. if anyone has any ideas please let me know!!!!!!
    thanks.......

    Well, I can't find it. I remember he said it was working fine under PT 7.3.1.
    I assume it would work under Core Audio using the Digi hardware, just not the DAE or DTDM features. If you're new to Logic then the Core Audio will be enough to get you up and running.
    Just from reading the manual the DTDM features don't seem to be any different than earlier versions. I was hoping for more surround support, but I guess I won't really know until I test it what is and is not possible. Currently I run ProTools on a MacPro and Logic on a G5 and link them with MTC, and I can always keep this approach if I find it's more flexible.

  • No audio with video, website navigation impaired, I can no longer recommend Firefox

    I maintain the video site shaleshockmedia.org. I can no longer recommend Firefox to viewers because of the severe problem I have been experiencing: No audio with video; navigation often does not work. Maybe this is purely a local problem. Please let me know if the site is fully functional or not when you go there. There is no problem with Chrome or Safari. My computer is a Macbook Pro 3,1 Intel Core 2 Duo. MacOs 10.6.8

    Note that there are a lot of popular extensions that can cause issues with videos not working apart from issues with the Flash plugin.
    In what way is the navigation not working properly?
    Can you give some examples?
    Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
    *Do NOT click the Reset button on the Safe mode start window or otherwise make changes.
    *https://support.mozilla.org/kb/Safe+Mode
    *https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
    Check for problems with current Flash plugin versions and try these:
    *disable a possible RealPlayer Browser Record Plugin extension for Firefox and update the RealPlayer if installed
    *disable protected mode in Flash 11.3 and later
    *disable hardware acceleration in the Flash plugin
    *http://kb.mozillazine.org/Flash#Troubleshooting

  • Exporting audio with a patch?

    I have been using Logic Pro X to record some musical tracks in my studio. The sound quality of the program is phenomenal. I haven't ever had the idea to switch programs, it's just this one thing that gets me. So my question is, How do you export one of the audio tracks you lay down WITH the patch you added to it? I have put patches on the tracks before and tried exporting the track as an audio file, but it does not export it with the patch I put on it in Logic Pro X (it only exports the audio that was recorded originally). Please Help! I have struggled with this one area for so long, I have even gotten "I Don't Know" from Apple support members, given that this is a very complex program with all of the possibilities, i understand that they don't. Therefore, I am asking you guys. Thank you so much!
    I am using Logic Pro X 10.1.1
    iMac with OS X Yosemite 10.10.2

    Use the word "Bounce" as a search term.
    http://help.apple.com/logicpro/mac/10/

  • Export audio with timecode

    Hi all!
    How van i export audio with timecode from FCP?
    Can you guys help me?
    Thank you!
    HBars

    Thank you all for the msgs!
    In audio post-production a .BWF files is used (broadcast wave file), with all the "audio information" timecode is used to sync with an external video...
    To do this kind of export i would need an extrenal hardware to record it... i was trybg to know if you guys have another way os doing it.
    I can sync by 1khz, 3/5/10 seconds from start... but with tc ... it would rock on!
    Thank you all...
    Tips are welcome!
    HBars

  • Syncing External Audio with Video on iMovie

    If syncing external audio with video on imovie, once successfully syncing the 2 is it possible to permanantly merge them so that I can continue trimming and rearranging clips without having to continue to re-sync the audio and video after every change I make?

    In Final Cut Pro X, yes. In iMovie...no.
    The workaround in iMovie is to sync your external audio to the video clip. Mute the audio on the video clip so all that is left is the good audio. Then use SHARE/EXPORT TO QUICKTIME. Choose Movie to QuickTime Movie and under Options choose Apple Intermediate Codec as the Video Codec.
    Then save this clip in a place you can find it. Finally, import this new clip back into your event.

  • Best way to sync (shift to match) audio with video in FCE 1.01?

    What is the best way to sync (shift to match) audio with video in FCE 1.01?
    Step by step in simple wording please, since I am new at this.
    Thank you so much.
    Walter

    As you probably know by now, DVD camcorders are not compatible with FCE or pretty well any other DV based editing system.
    Possibly the simplest (though not cheapest) route would be by using an Analogue-Digital converter.
    Streamclip and other similar programs are supposed to work but I have had no experience with them.
    In the long run probably the best (but costly) solution would be to buy a Mini-DV camcorder - it doesn't have to be a top of the range model - even the cheapest ones can produce high quality video. Then you would not have to mess around converting DVD files with the inevitable loss of quality it entails.
    A cheap DV camera need be not much more expensive than an A/D converter.
    Ian.

Maybe you are looking for

  • Discoverer  report does not sum up the column

    Hi All, I am running the discoverer report from discoverer desktop and was trying to use the sum function to sum the total amount of the report. The sum function does not work and it only display Cell Sum: (blank) with no actual data. When i checked

  • Continuous paper jam message HP Photosmart Premium C309g-m

    No jam, paper will not feed, get message again and again paper jam. Even with no paper in hopper.  If i stuff the paper way up inside it feeds completely through the machine.  Was working fine printing 12 of 14 pages then it started the no feed paper

  • Adding custom fields in screen

    I have added two custom fields in QUOTATION(VA21) in additional data tab B...when i create quotation for a particular sales order i am getting the fields in VBAK table and the issue is while creating sales order for the same i have to get these field

  • Issue with Tomcat + Struts  please help.

    I'm developing in Struts Action Framework using Tomcat 5.5.12 as server, Eclipse IDE with Exadel plugin for Struts development. My application right now only uses a single .jsp as my view component. This jsp, called index1.jsp uses <jsp:include page=

  • IPhone Does Not Appear in iTunes

    Hi! My iPhone 3GS does not appear in iTunes. It is recognised by Windows. It is recognised by iTunes in my desktop PC, but the problem is when I use my Samsung NC10 portable notebook. I am using Windows XP Home, version 2002, with SP3. iTunes is vers