CS4 on an Older iMac

I have an old iMac that is running CS2 - or should I say TRYING to run CS2.
The computer has a 2.16 GHz IntelDuo Processor, and 2 GB of Memory.
I pretty much cannot use CS2 - when I open it, the computer slows to a crawl.
I upgraded from Tiger to Snow Leopard, and that didn't have much effect.
My other computer is a newer iMac, and it is running CS4 with no problems.
I'm wondering if I can run CS4 on my old machine, or whether I pretty much have to stick with using only Lightroom until I upgrade the old iMac?
Or maybe Elements will do all I need (Not super heavy use, as 95% of my processing is done in Lightroom).
Thanks

The reason why CS2 is running so slowly on your Intel Mac is because it is running via Rosetta emulation. CS2 was designed for PPC. Emulation is most always slower than running a program specifically created for your processor. CS4 should run better on that old Mac as CS4 was designed for Intel.

Similar Messages

  • Error Code 6 on trying to install a previously bought CS4 from an older Macbook Pro to a new iMac.

    Iam trying to install my Photoshop CS4 onto my new iMac that I used on an older Macbook Pro that no longer works but when I try to install it I get an error code 6. Any help is greatly appreciated.

    Murray,
    These illustrate what I'm experiencing.
    Image #1 - Shows the template file open and the place it is and always has been saved.
    When this template is saved DW does not offer to update the site pages that use this template as expected.
    So I attempt to update the pages via Modify:Templates:Update Pages and this is where I encounter the 'error -43' message.
    You asked for a file. Please be more specific as to what file or files. Presume you'd want the source code in a text file, correct?
    I appreciate you time and interest.
    John

  • CS4 migration to new iMac results in fatal error

    HI, I have CS4 installed on an older iMac.  I just bought a new one (without a disc drive).  I migrated all my files across to the new machine.  CS4 gives me the following error when I try and open an image.  Fatal error - missing component  /Library/Application Support/Adobe/Adobe Version Cue CS4/Client/4.0.0/VersionCue.framework.  (The version cue has already been disabled in both photoshop and Bridge) Any help will be much appreciated
    Thanks, Stew

    Try downloading/installing the trial version from the site linked below.  You can use your serial number to activate it to full use.
    Be sure to follow the steps outlined in the Note: Very Important Instructions section on the download pages at this site or else the download will not work properly.
    CS3 and CS4:
    http://prodesigntools.com/download-adobe-cs4-and-cs3-free-trials-here.html

  • I have an older iMAC that once burned CD's with no issues. Now I get an error message saying "The attempt to burn a disc failed. The device is not accessible, probably because it was removed". I have never had it touched so the device was not removed.Help

    I have an olde iMac that once I have an older iMAC that once burned CD's with no issues. Now I get an error message saying "The attempt to burn a disc failed. The device is not accessible, probably because it was removed". I have never had it touched so the device was not removed. Please advise as to what could be the problem. How to fix. Thanks

    Try resetting the SMC and PRAM first, if that doesn't help try a cleaning disc.....and then buy an inexpensive external burner. Slimline super drive failures are all too common.
    To reset the SMC
    Shut down the computer.
    Unplug the computer's power cord.
    Wait fifteen seconds.
    Attach the computer's power cord.
    Wait five seconds, then press the power button to turn on the computer.
    Resetting NVRAM / PRAM
    Shut down your Mac.
    Locate the following keys on the keyboard: Command (⌘), Option, P, and R. You will need to hold these keys down simultaneously in step 4.
    Turn on the computer.
    Press and hold the Command-Option-P-R keys before the gray screen appears.
    Hold the keys down until the computer restarts and you hear the startup sound for the second time.
    Release the keys.

  • How do I connect an older imac to my new imac to use as a second monitor?

    Hi !
    I was wondering if it were possible to  connect an older imac to my new imac to use as a second monitor?
    My older imac is from 2006. The new one is a 2012 imac.
    Any advice would be appreciated.
    Thanks,
    JC

    http://support.apple.com/kb/PH4469
    Look this article over, the key is to connect either mini display port or thunderbolt and using CMD+F2, let me know if this helps or if it doesn't work out. I'll find another solution if this doesn't work Joel ^_^

  • We have an older IMac (preIcloud) and just purchased a new Macbook Air. Our Iphones are set-up to synch with the IMAC and my calendars on the IMac & the phone look the same. But when I open ICal on the MacBook Air my calendar is missing items? Help..

    We have an older IMac (preIcloud) and just purchased a new Macbook Air. Our Iphones are set-up to synch with the IMAC and my calendars on the IMac & the phone look the same. But when I open ICal on the MacBook Air my calendar is missing items? Help.

    Are you wanting to import iCal to the MacBook Air. Since iCloud doesn't work with 10.6 OSX you probably don't have any data in iCloud yet?

  • I have an older IMAC mid 2007 intel core.  I want to transfer my backup files from an older Maxtor drive to a new one.  My old drive is not support by Yosemite.  Can I transfer the files to a new supported drive?

    I have an older IMAC mid 2007 intel core.  I want to transfer my backup files from an older Maxtor One Touch drive to a new one.  My old drive is not support by Yosemite.  Can I transfer the files to a new supported drive?  I haven't bought a new one yet.  Any suggestions as to which new one to purchase?

    See if you can get the drive to mount. See mount section of 1st link.
    Disk Unmount Using Terminal
    Disk Utility – Force Mount Disk

  • I have an older iMac 5,1 and the disc drive no longer works. I was hoping that I could the Apple USB super drive as a replacement, but the info on the super drive page says compatible with iMac 2012 or later. Does anyone know why it would not work for me?

    I have an older iMac 5,1 and the disc drive no longer works. I was hoping that I could the Apple USB super drive as a replacement, but the info on the super drive page says compatible with iMac 2012 or later. Does anyone know why it would not work for me?

    A reply to similar question (Q & As , in product page Apple Store) says:
    "...dissable the internal reader hardware from devices setup. Then plug the external usb superdrive and that's it."  Answered by Enrique T from Lima Oct  25 2013.
    If you can locate an external Apple USB 'Air" superdrive for earlier model MacBook Air, that should work. The newer one for the Air is the same as for iMac, now.
    You may be able to use other brands of external USB optical drive with your older intel-based iMac, as some of them function capably. A few should also be able to see system discs or other bootable utilities on DVD.
    Hopefully this helps.
    Good luck & happy computing!

  • How do I repair the internal disk drive on an older iMac?

    Running Snow Leopard OSX 10.6.8 on an older iMac.  I ran Disk Utility and it found a problem requiring the internal disk to be repaired.   The instructions said to boot the system using an installation CD.  The only CD I have is for OSX 10.4.4 ( Tiger).  I don't have one for Snow Leopard. I can access this CD and instructions on the CD, "About Apple Hardware Test" say to hold down the D key to boot into the diagnostics, or the hold down the "C" key to boot to the OS on the CD.  Neither of these options work.  It keep booting into Snow Leopard (OSX 10.6.8) and I cannot repair the internal disk drive without running on an OS started form the CD.
    I've spent a couple of hours trying to get it to boot to the Tiger installation CD.  Wish I had made an install CD for Snow Leopard.  Maybe that would work.  Is that what I need?  I really think it should boot to the Tiger CD.
    I've spent lots of time in these user forums and don't see anything that helps.  Any suggestions??  Having trouble with doing automatic Time Machine backups to an external disk drive and maybe it is because of the corrupted hard drive.  Although the error looks quite minor from the description in Disk Utility.  The system runs fine and I don't see any other problems.  Just struggling with Time Machine. 
    This is an older iMac, 4,1 with a 2.0 GHz Intel Core Duo with 2 GBytes of SDRAM.  20 inch screen.  I have a MBP sitting next to it and use them both, even though I can't update the iMac to Lion or above because of the Core Due processor.  It is still a good computer and very useful. 
    What do I have to do to get it to boot from a CD?
    Thanks for your help,
    veehb

    That is well worth $20.  I'll pick one up tomorrow.  Is there an easy way to make an installatoin CD that will also be a backup for my installation? 

  • I have an older iMac running on 10.5.8 and need to update to mountain lion how do i go about it?

    I have an older iMac running 10.5.8 and need to update to mountain lion, how do I go about it?

    Welcome to the Apple Support Communities
    Check if your computer is compatible with Snow Leopard > http://support.apple.com/kb/sp575 If it's supported, cal Apple to buy Snow Leopard > http://support.apple.com/kb/HE57 Then, make a backup, insert the DVD and upgrade. Finally, open Apple menu > Software Update and install the latest version.
    Check if your Mac is supported > http://www.apple.com/osx/specs If it's supported, open App Store and purchase OS X. Check if your programs are compatible > http://www.roaringapps.com

  • How can i upgrade from iphoto 7.1.5 to 8.1.2 on an older iMac running OSX 10.6.8 ?

    How can I upgrade from iphoto 7.1.5 to 8.1.2 on an older iMac running OSX 10.6.8 ?

    With the above listed config that I have (iphoto 7.1.5 on an older iMac running OSX 10.6.8), how can I move my iPhoto library from this old iMac (2006) to my NEW iMac (2011) that is running iPhoto 9.5.1 ?
    To open an iPhoto 7.1.x version in iPhoto '11 you need to run the iPhoto Library Upgrader. See this Support document:
    iPhoto '11: About the Library Upgrade
    Download and install the upgrader,  then run it on your iPhoto 7.1.5 library. After that, iPhoto will be able to open your library and upgrade it to version 9.5.1. And you will be able to merge the libraries with if Library Manager.

  • Transferring info from older iMac to new one.

    Is there a way to transfer my files from my older iMac to My new one? I mean, can I use the firewire port or something easy like that to transfer my files? Or will I have to start form scratch. BTW did I mention my cd/dvd drive on my older mac is dead? There will be no backing up files.
    Please help!

    Just be careful with Migration Assistant. If you select Applications, it will move everything over that isn't newer or already on the new Mac. You can't pick and choose. This means it will move any ancient or incompatible apps, including all their associated files, which may end up being spread out all over the new computer.
    In addition, if you are moving things out from a PPC to an Intel, read this.
    http://discussions.apple.com/thread.jspa?messageID=1872713
    Sometimes it's safer to just move files and folders over.

  • I need to reinstall the system software on my older iMac. I have lost the system disks, though... so now what? It had 10.4.

    I need to reinstall the system software on my older iMac. I have lost the system disks, though... so now what? It had 10.4. We moved, and I have looked everywhere. Am I doomed to find a way to buy it? Can taking it into the Apple Store fix it? Will it be expensive THERE? I've already saved all of the files I want off of it.... I just need it to work now.

    You've lost me on why you need to reinstall Tiger, when you already have all the files you wanted (which means Tiger worked perfectly fine). If you want to upgrade to Leopard, that's a different issue: your Mac needs to meet the minimum system requirements for that, which you can easily determine.
    If you just want to get a replacement set of Tiger install discs, you can try calling AppleCare and see if they're able to send you a replacement set, and if not, you'll have to buy a new set yourself. You can get them on eBay, Craigslist, and HardCore Mac (http://store.yahoo.com/hardcoremac/), although they sell it for ridiculous prices.
    < Edited by Host >

  • Older iMac hard drive in enclosure won't boot long to new iMac?

    I have just received my new iMac i7 with the THIN case.....it is pretty awesome! I removed the hard drive from my previous iMac (2006 Intel core 2 duo) and put it into an enclosure hoping to retreive my old files. Here is the problem.....the old hard drive (250GB) will not stay booted long enough to transfer my files. The enclosure is a Sabrent 3.5" SATA hard drive USB 3.0 enclosure. It will appear for approx. 20-30 seconds, and then the message:
    "The disk was not ejected properly. If possible, always eject a disk before unplugging it or turning it off. To eject a disk, select it in the Finder and choose File > Eject. The next time you connect the disk, Mac OS X will attempt to repair any damage to the information on the disk."
    It will disappear from the desktop and I am unable to access it any longer. I am able to open the older hard drive and can open older folders, etc. while it is mounted on the desktop.
    A little background on the older iMac.....it quit working completely, would not turn on, no fan noise, no hard drive spinning, NOTHING. I ordered a replacement power supply and installed it......but still nothing. I can only assume the logic board is dead. Since it was what the genious at the Apple store called "vintage", we deicided to upgrade, hence the new iMac. (And it was 7 years old after all!!)
    What can I do to get the info I need from the older hard drive? Like I said, it's 7 years old and has a LOT of info. I WAS able to backup pictures, music, and some misc. work to an external hard drive before it died....but I need the "little" things like my address book, calendar, old emails, bookmarks, etc.
    Thanks in advance for any help in this matter!

    If this is an enclosure that is USB powered that may be the problem. Mac are notorious for not putting out enough power from the USB port to properly power these USB powered drives. I suggest you get a SATA to USB Adapter that has it own AC power supply to power the drive.

  • HT4854 I bought a new mac including 10.8 ML. How can I install 10.8 on my older iMac (mid-2011) with 10.6?

    I bought a new mac including 10.8 Mountain Lion. (How) can I now install 10.8 on my older iMac (mid-2011) which came with 10.6?

    You will need to buy it at the app store. The license for the pre-installed OS on your new machine is only for that machine. Only OS's purchased from the app store can be installed on more than one machine (as long as you own it).

Maybe you are looking for