CS4 on OSX 10.10 won't print

I have gotten lots of good help through the community. As a result I have de-installed CS4. Run the adobe cleaner. And re-installed CS4. Many annoying bugs were fixed but I still can't print from photoshop to my epson 3880..... I used to be able to do this and I still can print from other programs. I've done troubleshooting with Epson and it's clearly a Photoshop issue. Are there any other suggestions before I throw in the towel on this otherwise perfectly good program and pay monthly for the cloud?
I'm really appreciative of the time you take to answer!

If your epson 3880 prints from apps outside CS4, then this is most likely a Preferences problem and requires a reset.
Hold down cmd-opt-shift and start Photoshop CS4. You will see a Reset dialog. Agree to the reset.
Gene

Similar Messages

Mac won't print to c309g

Ok, so my mac (OSX 10.10) won't print to c309g. I can check ink levels and print a test page from the computer but not print a document. Have followed all the advice I can find but no luck yet. Any thoughts?

Try to use this guide: Mac 101: Connect your printer (Mac OS X v10.5 or earlier)

Officejet Pro 8500 Premier won't print (Mac OSX 10.6)

The printer is detected by my computer and is able to interact with it, but it refuses to print. I restored factory settings with no luck. I downloaded the HP software/drivers for my laptop, ran setup, everything worked...still won't print. Any ideas please!?!
Thanks!
-Shawn

Hi Stonesp85,
Is there any error message pops out on printer front panel or on the PC?
Are you able to print out any self-test page like Product Status Report or Network configuration page ( in Setup -> Reports)?
this is just a quick test for your printer hardware.
to fully validate you printer hardware, I suggest you download "HP Hardware diagnostic Utility" in below link and run it:
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?cc=us&lc=en&jumpid=ex_r4155/hho/ipg/ccdoc/h...
if there is no problem found on printer hardware, please make sure that you installed the right driver, below is the link for the printer driver on Mac OSX 10.6:
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=mp-85024-2&cc=us&dlc=en&lc=en&...=
Hope it helps you.

I have OSX 10.6.8 and my new HP 6700 printer won't print until I "empty print file!" What does that command mean? How do I do it?

I have OSX 10.6.8 and my new HP Officejet 6700 all-in-one printer won't print until I "empty print file!" What does "empty print file" mean. How do I do it?

Go to System Preferences>Print & Fax>Open Print Queue, select(highlight) any jobs and delete them. Do this for all printers in the left side bar (select printer when you click Open Print Queue)
Hope this helps

CS4 PS won't print to USB Epson 4900

It does, however, print happily to a USB Epson 2200 plugged into the same machine. All other apps on this Mountain Lion Mac Mini, including CS4 Illustrator, print fine to the 4900. I have tried both a USB and a network connection to the printer with the same result. There is *some* small output to the printer (just a flash on the print monitor), but no output results. Suggestions?

Hi TLL
Thanks for your reply! I guess I'd have to say no, it hasn't ever worked right, because this is a new installation on a new mac mini. PS worked fine to that printer on my old mac G5, but it has yet to work from the mini. Other info: PS on the G5 will even print to that printer as an "attached printer" on the mini! The only thing that won't print to the 4900 is PS running on the mini itself.
Drivers! Epson warned not to use the install disk that came with the printer for Mountain Lion, so I got them online (actually did it several times). That still seems the most likely problem, except that every other app on the mini, including Illustrator CS4 from the same cd as PS, prints fine.
I tried Colorbyte Imageprint, and it can print PS output to the printer, so all is not lost: all is just weird and/or expensive.
Thanks!
Jack

OSX Lion won't print to HP desk jet F300

OSX Lion won't print to HP desk jet F300 - any help?

Thanks so much. It worked the first time! Glad I checked the forums.

Canon iP8500 won't print OSX 10.6.3 apps

My Canon iP8500 won't print OSX 10.6.3 apps, it causes them to crash. It crashes Safari, Mail, Text Edit. Other apps (Excel, Word) print fine. I've updates to the new driver (10.30.3.0) to no avail. Any suggestions?

Try opening Disk Utility, selecting the OS X partition and then pressing Repair Disk Permissions.
You could also try opening Print & Fax, moving your mouse over the Printers list, and while holding down the Control key, click your mouse. This will make the Reset printing system pop-up appear. Select this and restart your Mac. This action will delete your printer queues but not your printer driver. So you will just need to open Print & Fax again and add the iP8500.

Epson CX4800 Won't Print In OSX Mavericks

I just upgraded to Mavericks. Now my Epson CX4800 won't print. I donloaded the Epson Printer Software Update (2.17) through the App Store Updates. I can print test pages through the Epson Printer Utility 4, but when I try and print any document from multiple apllications, my Epson Printer Utility shows that the document is printing (blue & white striped line), but nothing happens. I have tried deleting and adding the printer, but that does not help.

Well I unistalled Gutenprint using their generic uninstaller. I tehn uninstalled the Epson drives, then downloaded the new ones and installed the, Same issue.
I received this from Epson - but it did not work either:
Power off your product.
Open System Preferences and select Printers & Scanners.
Highlight the Epson printer and click on the "-" sign to delete the printer.
Click Delete Printer to confirm and close Printers & Scanners.
On your hard drive, select Library > Printers. Delete the Epson folder.
On your hard drive, select Library > Printers> PPD > Contents > Resources. Delete Epson Printer Name.gz
On your hard drive, select Library > Cache and delete the Epson folder.
Close the hard drive.
Restart your computer and power on the printer.
Go to the Epson support website.
Search for your product or select it from the list.
Select Macintosh under Drivers and Downloads.
Choose the printer or scanner driver for your system and click Download Now.
Once the download has completed, click on the file from your desktop to launch the installer.
Follow the directions to complete the installation.

CS3 won't print

I've suddenly run into a situation where PS CS3 won't print. The Print dialog comes up as usual, but after making the selections and hitting Print, the print job never makes it to the printer(s).I'm using Epson printers and running Mac OSX Leopard. I can print to the printers from other applications, and even from PS CS2. I've checked my scratch disk for space, so the images can be spooled, and have plenty of RAM available. The size of the images doesn't seem to matter.
I recently upgraded to the latest CUPS drivers, but I don't think that should affect PS. Epson says that the printers have built in support in Leopard, so no individual drivers can be downloaded. I would think that PS would be using thebult in drivers that shiop with the OS and not the Gutenprint drivers, anyway.
Has anyone had this problem before, or a solution?
Thanks in advance
William

CUPS and Gutenprint are two different animals, though the former is needed to use the latter.
You'll find the uninstaller here:
http://gimp-print.sourceforge.net/MacOSX.php
CAUTIONARY NOTE for CS4 users: If you have an Epson printer model for which Epson does not offer a 16-bit printer driver (for instance the Epson 2200 don't know of any others off-hand)), the latest version of Gutenprint, 5.2.2, will allow you to use 16-bit printing in Tiger and Leopard. In that case, you may definitely want to keep Gutenprint. I've been running it with no problems for about a week.
Gutenprint 5.2.2, released some two weeks ago, appears very stable and offers several bug fixes from earlier Gutenprint 5.2.x releases.
On the other hand, don't take this as a riniging endorsement of 16-bit printing (yet) if you're not already experimenting with it. I'm very happy with preliminary results, but it does slow printing considerably, as you're sending an awful lot more information to the printer. :)

Won't Print to Kodak 1400 Professional - "Printing" never ends

Hi - Using MacBook Pro 17" and Aperture. OS 10.4.x. Out of box, new Kodak 1400 Professional Printer worked fine, and printed several great pictures. A week later, I was unable to print anything at all. Printer Window shows "PRINTING" and the twirling barber pole thermometer, but it NEVER prints however long I wait and no error message.
I've opened and closed printer, restarted printer and computer, checked that the firmware is up to date, re-set the paper in tray, etc. ALSO, it won't print JPGS from Preview, or apparently anything.
What could have happened?
Fix?
David Ferleger
email [email protected]

I have no idea if this will help anyone, but it helped me. I had my Kodak 1400 working with no problems for quite a while. I never really printed much, but I did now and then. About two months ago, I ran out of paper and didn't purchase any more for a while. I finally got my two packs (so I could get the third free!) about two weeks ago. I now have two clients who need prints, a total of about 85 8x10s.
So, I setup the printer, installed the driver, and started going about my business. Setup the prints, got it all rolling, and prepared to run the first print through as I've found the first print on a new ribbon is a dud due to dust. Nothing happened. It went to "printing" and stared at me as though it were as dumbfounded I asked it to print as I was that it WASN'T printing.
That was yesterday. Since then, I've removed the driver about a bajillion times. Googled this, FAQ'd that, held my tongue appropriately, used different USB cables, different USB ports, removed the other printer, blahdy blahdy blah. Then, this afternoon while I was somewhere between awake and sleep, it hit me: why not try an older driver. I thought about it, and realized that since the last time I was using the 1400 successfully, I'd reinstalled OSX. What were the odds that when I downloaded the driver the last time, I downloaded the "wrong" driver and got the old one (1.0.2) instead of the NEW correct driver, 2.0.0.
So, I removed the old driver from everywhere I could. Restarted the computer. Installed 1.0.2, cliked print, and felt my heart sink as the red Error light blinked intermittently with the "Media" light. Shot through the heart... then, all of a sudden, it sucked in some paper, and started printing! Problem solved!
So, if you still can't print, try using 1.0.2. It might not work, but if you can't print with 2.0.0, what harm can it do? NONE! Muhahahaha. I feel so adventurous for using an old driver. (yes, this is what now counts as "adventure" for me... now go away or I shall taunt you a second time.)
Hope that works for someone!
--Mike
MBP 2.0ghz Mac OS X (10.4.7)

HP OfficeJet 6310 All-In-One printer won't print in color with new cartridge

HP OfficeJet 6310 All-In-One printer on a iMAC OSX version 10.9.5 system
Hello,
As I don't print in color much but had need to I discovered my printer not printing in color. I trouble shooted and even replaced with an new HP95 new from Office Depot ( I never buy refilled). The printer still won't print color but it advances the paper as if it was printing - just no ink on paper. I have cleaned thoroughly the ink jet heads, cartridge area, and run all the alignment and printer utilities. The test page print does not show color either. I have no error messages. Don't know what else to do.
thanks
DH

Hi there @dhengr!
Thanks for contacting the HP Forums!
I can see your having a print quality issue with your HP OfficeJet 6310. I should be able to provide documentation that will help locate a resolution. You mentioned you have already tried another HP95 tri-color cartridge with no resolution. I also noticed you said that the quality report from the printer also has no color ink.
If a stand alone test report is performed from the front of the printer such a printhead cleaning or print quality report and there is no color on the page then you are likely looking at a hardware issue within the printer. I have provided a document regarding Missing, Faded, or Dull Colors on the HP Officejet 6310 All-in-One Printer. If you follow the document from start to finish and still have the same issue then I would recommend contacting our HP tech support via phone. They deal with hardware warranty and replacement options.
Please call our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region. http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html
Have a great weekend and thank you again for posting on the HP Forums!
Cbert
I work on behalf of HP.
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" at the bottom of this post to say “Thanks” for helping!

The last page of every pdf document won't print.

If I ask to print just one page - nothing. If I ask for two pages, I get the first page. Help. Using Mac OSX 10.9.5 and Adobe 11.0.09
I tried printing using an older version of Adobe, had the 'won't print last page problem' so I upgraded to the latest version. Still the same exact problem. Does anyone have suggestions?

I have the same problem, but not just in Acrobat. Indesign also. So... I can't print a single page. Have to print two, and toss the one I don't want. Seems to be a problem with Adobe print interface. I can sometimes "trick" it by going to system print dialog box and back out again.

Pantone Color 5615 Coated Won't Print On 1 of 2 Identical HP DesignJet 5500s

Hi,
We've run into an odd problem where we have 2 locations with identical setups: Creative Suite Design Premium 4, Mac Pros, and HP DesignJet 5500s. The same InDesign file prints fine in one location with a DesignJet 5500, but when we print the same ID file at the second location that has a second DesignJet 5500, the only color that doesn't print correctly is Pantone 5615 Coated. We're using same printer driver version for both printers. I haven't yet checked Firmware versions for both printers.
On the printer that won't print Pantone 5615, the printer doesn't print it correctly in any of our Creative Suite applications. We tried creating completely new files in ID, PS, IL and the color won't print. We've checked color management in Bridge and ID and they seem OK. We're not currently having any other color problems printing with any other Creative Suite files with this printer. Colors are accurate all the way around.
I read the forum and saw a lot of posting about Pantone colors, so I will try some of the suggestions related to Pantone issues. At the moment, I'm not at the location with the problem printer and can't try the suggestions until next week.
When I was at the location yesterday, we tried printing Pantone 5615 from Quark 7.5 and the color printed fine. Obviously, we don't want to use Quark on an ongoing basis for this project. It seems likely that it isn't a printer hardware problem since the Pantone color prints out fine from the Quark file. There seems to be a setting somewhere in Creative Suite that the printer at our one location doesn't like, or there is some setting on the printer that is different than the other printer. I don't think it's a network problem with the one printer versus the other printer because I would think Quark would then run into the same problem.
Any suggestions?
Thanks,
Jason

I have the same issue with my 44" Z3100ps GP Photo, but it is when I print from Photoshop CS5. I am running OSX 10.68 and since the last Apple/HP printer driver update this last Summer my printer will not print solid black strokes or borders around an image, yet the image prints perfectly.
I tried to roll back the drivers with no success. If I make a solid black rectangler file and try print it nothing at all prints. If I scribble in Photoshop with white paint brush in the middle of that same file the printer skips the left edge of the black rectangle and then prints the middle scribbnle and right egde of the rectangle folowing the contour of the scribble on the left.
Had me baffled and still does, the printheads are in good working order. I print large canvas photos with 1.5" black borders used to cover the sides of stretched canvases. The only way I have found around this issue is to add an inch or so to the canvas size all the way around in photoshop and make it white. That seems to fool the printer into printing the file with the full black border. Still this is not a real fix, but at least it keeps my printer running.
Let me know if you find a solution to this. HP support doesn't help as they only give support to in warranty printers. Maybe Apple could help with the drivers?
Lucas

Safari won't print PDF files

Weird. If Safari gets pointed to a pdf file, it will display fine on screen, but won't print it out or save/display in Preview. Just started happening a week or so ago and I can't pin down what changed.
Fox and Chrome handle the pdfs normally.
Suggestions?
Safari 6.0.2
OSX 10.8.2
Thanks in advance!

Back up all data.
Triple-click the line of text below to select it, the copy the selected text to the Clipboard (command-C):
/Library/Internet Plug-ins
In the Finder, select
Go ▹ Go to Folder
from the menu bar, or press the key combination shift-command-G. Paste into the text box that opens (command-V), then press return.
From the folder that opens, remove any items that have the letters “PDF” in the name. You may be prompted for your login password. Then quit and relaunch Safari, and test.
The "Silverlight" web plugin distributed by Microsoft can also interfere with PDF display in Safari, so you may need to remove it as well, if it's present.
If you still have the issue, repeat with this line:
~/Library/Internet Plug-ins
If you don’t like the results of this procedure, restore the items from the backup you made before you started. Relaunch Safari again.

Epson Stylus S21 won't print on OS Mavericks

Hi,
I've been able to install my epson printer on my macbook but it won't print.
Every time I try to print, an error occurs and when I go looking for the fault, I find the following message:
"The function 'CGContextErase' is obsolete and will be removed in an upcoming update. Unfortunately, this application, or a library it uses, is using this obsolete function, and is thereby contributing to an overaal degradation of system performance."
Is there any way to solve this?
Thanks

On this page: Support and Downloads - Epson Stylus S21 - Epson it looks like the last driver Epson had available for "OSX - Intel" was from 2009, so it would appear that there is no Mavericks-compatible driver for your printer.
You could try this, though:
uninstall all Epson apps/"utilities"
go to System Preferences > Printers & Scanners > Print
control-click on your printer in the column on the left
select "Reset Printing System..." and "reset" in the dialog that follows
printers & scanners and it should see your printer and download a driver for it from Apple (if there is one)
If that doesn't work, try the Generic PCL printer setting in Printers & Scanners: OS X Mountain Lion: If the software for your printer can’t be found (the reference is for ML but it still applies to Mavericks)
if that doesn't work, see if there is a driver for your printer at Gutenprint for Mac OS X

CS4 on OSX 10.10 won't print

Similar Messages

Maybe you are looking for