CS4 on Vista Ultimate 64Bit, and XP-Pro 32Bit

I have CS4 Production Premium installed on a drive with XP-Pro 32Bit. Is it OK to point a new installation under Vista Ultimate 64Bit to the same Directory where the first Version is installed under XP-Pro?
I don't want to install the CS4 Suite twice on the same Hard Drive.
suggestions Please,
JJ

Thx Bob, I do have however 6 Hard Drives and each Win Version is installed on a different one and so is Adobe CS4 on a different separate Hard-Drive.
Why can I not point both Windows to the same Program folder???
why XP32, because I'm a chicken and want to make sure 64Bit works fine.
Thank you 4 now,
JJ

Similar Messages

  • Cannot install Vista Ultimate 64bits on Mac Pro 2008

    Hello,
    I'm trying to install Vista Ultimate 64bits on my new Mac Pro (2008, 2x Quad Core, 3x 500GBHDD, 16 GB Ram), but Vista is unable to find a correct partition type.
    The first thing I did was to install a 4th HD, and I constantly received an error 0x80004005 which seems to be too generic.
    Then I tried to install it on the 3rd HD (Bay 2 is where my OS X startup disk is located btw) but here no way neither....Windows cannot find a valid partition.....
    I tried to partition it manually in MBR...same problem....
    Then with BootCamp assistant...same problem...
    I also tried to use Vista Business 64 SP1, same problem...
    Do you have any idea ?
    Thanks,
    Patrick

    Hello,
    Thanks for your answer, but unfortunately I'm still stuck...
    To resume the situation :
    I put a brand new 250GB SATA in the bay 4.
    I start Bootcamp Assistant and tell him that I want to use this new disk for Windows and then start Vista x64 install.
    Vista sees 2 partitions on this new disk :
    Disk 3 Partition 1 : 200 MB (Primary)
    Disk 3 Partition 2 : 230 GB (Primary)
    If I try to use the P2 for the install, I have to format it first. Once formatted, Vista says : This computer's hardware may not support booting to this disk. Ensure that the disk controller is enabled in the computer's BIOS menu.
    If I try to use the 200 MB (just for fun..), then I also have to format it, but here I receive the error message 0x8000xxxx
    So clearly I'm lost...
    Could it be related to the 16 GB RAM ? Too much for Vista ?? I don't believe as this is Vista x64...
    Thanks for your help, ideas..
    Patrick

  • PDF Printer not working with Acrobat 8 & Vista Ultimate 64bit

    I have not been able to print pdf's.  I am uptodate on upgrades and have installed, reinstalled printers and repaired the program etc.
    When I install an adobe printer I get the Adobe PDF Converter.  When I try to print with it, I get an audible failure signal and nothing ever happens.  Sometmes I get a sceen indicating it has failed, sometimes not.  I have had this problem since upgrading to a new computer with Vista Ultimate 64bit OS.
    I have seen various "Fixes" but none seem to address my problem or work for it.
    Anyone with the same problem and perhaps a solution?

    What version of AA8?

  • Can I copy & install "ipod touch App Pack 4A93" in vista ultimate 64bit

    I am to do a clean install of vista ultimate 64bit. This is a move from my present vista Home Premium 32 bit.
    All my purchase for for the ipod touch have taken under vista 32bit and details are stored in App Data->Roaming->Apple Computer->iTunes->Mobile Applications->ipod touch App Pack 4A93.
    Now when I do a clean install of my latest OS vista ultimate 64bit I will have to wipe clean of the drive and it will erase my "ipod touch App Pack 4A93" aswell. I have saved that in a usb key to copy that back in the correct folder. Now my question is can I copy that back in VISTA 64bit and will it recognise my previous purchases for my ipod touch?
    Has anybody know it for sure?
    Thanking you in advance for your help and assistance.
    Snow

    Hello.
    I am not sure if the Vista 64 bit will know the folder and App pack or not. But some of the other methods of backing up and getting Apps back you purchased are below. I am not sure about the UK but I know in the USA when you purchase an App you can download it again for free without having to buy it again.
    How to redownload purchased applications from the App Store
    http://support.apple.com/kb/HT2519
    Copying iTunes Store purchases from your iPod or iPhone to a computer
    http://support.apple.com/kb/HT1848
    How to back up your media in iTunes
    http://support.apple.com/kb/HT1382
    Back up your iTunes library by copying to an external hard drive
    http://support.apple.com/kb/HT1751

  • Tecra S10-106 - 3G driver for Vista Ultimate 64bit

    Hello,
    I am owner of a Toshiba Tecra S10-106. Due to the fact that Vista Ultimate 64bit is much faster as Vista business 32bit, I would like to use Vista ultimate 64bit as operating system, but I can't find the 3G driver for Vista 64bit. All drivers can be downloaded from USA in english and can be used in german, only the 3G driver is missing. Can somebody else send me a download link or tell me where I can find a suitable driver for Vista 66bit?
    Thanks in advance.

    Hi
    To enable the card you will also need to install the 3G RF Power control utility which is here at http://support1.toshiba-tro.de/tedd-files2/0/3grf-en-20090217134719.zip.
    That is only half the story as I think you also need to install the Value Added Package here http://support1.toshiba-tro.de/tedd-files2/0/vap-en-20090217134137.zip as this then enables the hotkeys to turn on and off the 3G wireless card.
    Hope that helps.
    Regards
    Phil

  • MXF clips do not open in CS3 of CS4 (windows vista ultimate)

    I have Sony DXCAM's MXF's which I can not import in Premiere (neither CS3 nor CS4). I did convert the original MXF's using Sony's DXCAM software.
    Adobe claims it supports MXF files. Another editing company which uses CS3 can import XMF's using a Windows XP machine. I work on Vista Ultimate.
    I have an itch that I am missing a vital codec of somekind, but I can not find out why my copies of CS3 and CS4 of Premiere Pro do not allow me to import MXF files. From within the Media browser in CS4 it results in the same disappointing result. It doesn't open.
    When I tried to open one MXF file in CS3 the program crashes and forces me to close it. In CS4 I get an error message after importing which reads; "Unsupported format or damaged file."
    Any help is very much appreciated, as I need to start my editing ASAP>
    Thx!
    Jan.
    System specs short:
    Windows Vista Ultimate
    PC Intel Core2 Duo CPU
    T7800 @ 2.60Ghz
    No Additional codecs installed.
    DXdiag file: http://www.buroklei.nl/upload/JanDiagDOC.zip

    Hi Jim,
    Thanks for your feedback. The first thing I tried was to import the MXF packages (I don't see lone MP4's) into Premiere. That did not work. So I exported the MXF files using Sony's U1 player/recorder.
    I think its a Vista and/or codec problem, as my friend who workes on an XP machine is able to open MXF's in CS3.
    Jan

  • CAM for Windows vista ultimate 64bit

    Hello can some one tell me what cam I should buy for my 64bit windows vista ultimate please,
    i would like to buy a new cam and want one that will work with the 64 bit vista,please advise.

    OK, you're looking for a webcam.
    I admit I don't know what's supported by Vista64, but I have a Logitech QuickCam Pro 9000 and am very happy with it.  Since it's USB Video Class (UVC) compliant it may even have drivers built into Vista (not sure of this, I don't run Vista on any of my machines, just XP and Linux.)
    Do some research on Logitech models and you should find some with good Vista64 support.
    *disclaimer* I am not now, nor have I ever been, an employee of Best Buy, Geek Squad, nor of any of their affiliate, parent, or subsidiary companies.

  • Installing AUTHENTIC windows 7 ultimate 64bit on Macbook Pro - ERROR, help!

    I am trying to install windows 7 ultimate 64bit (not the beta or RC, this is an authentic windows 7 DVD -- signature edition) on my macbook pro using Bootcamp. When the computer tries to reboot, i get a message that says:
    1.
    2.
    select cd-rom boot type:"
    I saw forum posts with this problem where people were using improperly burned windows 7 versions, however, this is not a burned DVD -- its authentic from microsoft. This means i cant reburn the dvd...
    Any suggestions?!

    Did you by any chance install Snow Leopard on your MacBook Pro?
    My MacBook Pro was working perfectly fine. Installed windows many times the last 2-3 years and never had problems.
    I installed Snow Leopard a couple weeks ago and since then I get this exact same error with all my Windows Install discs (ones that always worked before!).
    Whatever I do. I can't get any Windows installed anymore.
    The discs are fine, Bootcamp menu reads it and recognise it. But the moment you try boot from it you end up with the error the OP is describing!
    And all this, after I installed Snow Leopard. Restoring to previous versions of MacOSX did not help!
    So it seems that the Snow Leopard installation does something to the DVD drives on the MacBook Pro's (upgrading firmware whatever) and now it's ruined!!

  • IPhone, Vista Ultimate 64 and Outlook 2007

    I am sure this is becoming an issue. I am equally sure the iPhone will work with a MAC 64 bit OS so why not Vista??? After picking up the long awaited revolusionary device Friday I waited hours to get activated to learn that iTunes recognizes the device as a camera and I can not sync with Outlook. If that wasn't enough I went back to Cingular / At & T to return the device and switch back to my reliable Blackjack I was told of a 10% restocking fee, however for another $15.00 I could purchase a flash drive to transfer the data. The flash drive was a failure. Now Cingular tells me to bring in my other phone and they will port over to a SIM reader which defeats the purpose of syncing info daily. Did I fail to mention that while I was waiting for the activation that the device crashed my OS and the computer is on its way to HP for repairs. Setting aside lost time and money I would imagine that Apple is fixing this problem and that an update will become available sooooon.
    9000t   Windows Vista   Ultimate 64

    I have the same issue (activating that is - 64bit Vista), but I immediately called the store (Apple), two hours after I bought it. They said the restocking fee would be waived in the case of non-compatibility, like this issue is. Dang right, specially since even Apple employees are barely aware of this issue, and original system requirements make no mention about this either.
    I'd continue to push back to get a full refund. That's just profiteering otherwise.

  • T61p, window vista ultimate 32 and registry cleaning

    Hello, small question. Does anybody uses a registry cleaning / optimizing software ? If yes which one would you recommend as reliable and not creating havoc in the computer ? Or is it better to avoid such piece of software ?
    regards and thanks in advance

    I use Enheance My Vista Free edition and haven't had any problems on my T61 Vista 64bit. I was a bit skeptical after running a scan and it found over 1000 errors but I cleaned them all anyway and haven't had any problems. You must be careful though. I have tried others that have done terrible things to my machine. PC Complete Backup before doing anything, or at least create a restore point. It also has a registry backup option that you should use. Good luck!!
    7663-A22,T61 14.1 Wide,T7300 2.0gig processor, 4 gig RAM, 500gig Seagate Hybrid HDD, 200gig Ultra Bay HDD, Ubuntu 64 Bit.

  • Two Copies of Flash Player in Vista Ultimate 64bit SP2 ?

    Hi,
    I use Secunia PSI to validate the currency of my software. It reported Flash player to be down level.
    I updated to the new version and Secunia PSI still reported the program to be downlevel.
    The flash player test reports WIN 10 0 42 34 installed.
    It looks like my Vista Ultimate 64 bit should have copies of flash player at these two locations:
    C:\Windows\SysWOW\Macromed\Flash
    and
    C:\Windows\System32|Macromed\Flash
    The folder Macromed doesn't exist at the System32 location
    If I need the 32 bit version where do I find it? And, How do I install It?
    Thanks
    Frank C

    Thanks for the reply Mvargas1.
    That certainaly is confusing - System 32 is for 64 and WOW 64 is for 32!
    Both my Firefox and Internet Explorer browsers seen to be working with Flash Player OK.
    I uninstalled and re-installed Flash Player and Secunia no longer finds a down level version.
    Thank You
    Frank C

  • Upgrade T400 to Vista Ultimate 64bit?

    I have a T400 on order (2764CTO) and scheduled to ship 9/5/08.  As you may know, it only comes with the 32bit version of the Vista OS.  I would like to upgrade to Vista 64bit and am looking for a check list or white paper that can guide me though the process. 
    Two questions:
    Does such a thing exist?
    What if any serious problems/challanges exist in doing so?

    After your install, put the proper ThinkVantage System Update in place. You need version 4. Uninstall the older one first. It will install most of the drivers you need.
    The link is in step 15 of http://www-307.ibm.com/pc/support/site.wss/document.do?sitestyle=lenovo&lndocid=MIGR-74108
    Here is a link for some more info:
    http://www-307.ibm.com/pc/support/site.wss/document.do?sitestyle=lenovo&lndocid=MIGR-74108

  • Vista Ultimate Freezing and making noise in Macbook Pro

    I just sent Microsoft This same question and i'm sure someone has posted it here but i couldn't find it. Long story short... i bought macbook pro 15", installed vista and after couple of days, it froze when i quit a game or when i was watching a movie or just randomly.. even when its just sitting there.. and it would make this crazy noise.. and after researching on google i read stories about the fans not comin on and the heatsinks... crazy stuff.... i bought a laptop cooler and i guess it help but it still crashes 5-6 times a day... leopard side is fine... anyways only reason im posting here is i saw this problem all over different forums on google and all it was, was people agreeing they have problem.. nobody with a solution..
    please help me

    wrong forum
    http://www.apple.com/support/macbookpro
    will get you started and Lion Community
    in windows you'd do chkdsk + ccleaner
    in Lion use the Recovery mode partition
    might want to backup, erase, clean Lion OS and import, something like Setup Assist is to Win Easy Transfer

  • Vista Ultimate 64Bit  - GUI Problems

    Hi all,
    hope you could help.
    System:
    Vista 64 Bit Ultimate on
    Xeon 2,5 Ghz
    12GB Ram
    2 Monitor on a
    Nvidia Geforce GTX280
    Problem:
    After working some minutes with Indesign first alle the input fields of the GUI hide and I cant change thinks like object size or font size. Then also the the Windows for 'Save as' 'Open' or for exemple 'Document prefs' could be open/displayed. Only solution 'Strg+S' and restart indesign. Working for some minutes again.
    Things I have done/tried allready:
    - Update alls Adobe CS3 packs an all Vista stuff
    - Change the Vista Skin (Old XP Style, ...)
    - Change Screenfont prefs (cleartype...)
    - Try different GFX-Drivers
    - Try a different GFX-Card (before was Nvidia Quadro FX1700, same Problem)
    - De- and Reinstall hole CS3

    Thanx Bob,
    Wasnt possible, because the graphic card driver dont allowed it to ture off. But I uninstalled the driver complete and worked without any driver in 1024x768 (with one screen).
    Same problem, after a while (sometimes 1h working) the 'open' or 'save as' screen dont pop up and the problem with the input fields (seen on the screen shot). If I restart indesign, everything is fine for the first time.
    If you still think its the graphic card do you know which driver I should try for Nvidia Geforce GTX 280 (or maybe for the Quadro FX1700, because there was the same problem)?
    Regards, Robert.

  • Can WPA Security work between a Vista Ultimate client and the VersaLink 7500 Modem?

    Could not get this to work.  I specified WPA Any and created my own 8-ASCII character case-sensitive WPA key. Ussed this info on the Vista side to create a wireless connection.  Would not connect.
    Verizon Support tells me WPA does not work betyween Vista and the 7500 modem.  Only WEP works.
    And, BTW, my laptop is less than 6 months old and is  draft-N wireless compatible.
    Why do I care?  Because Microsffoft recommends AGAINST using WEP - it is not very secure.  I will quote them, below from the Vista Help File.
    Wikipedia says, "Despite its weaknesses, WEP is still widely in use.[3] WEP is often the first security choice presented to users by router configuration tools even though it provides a level of security that deters only unintentional use, leaving the network vulnerable to deliberate compromise.[4]
    Thanx for all help. 
    If you plan to have a wireless network, you should set it up so that only people you choose can access it. Here are a few options for wireless network security.
     Wi-Fi Protected Access (WPA)
    WPA encrypts information, and it also checks to make sure that the network security key has not been modified. WPA also authenticates users to help ensure that only authorized people can access the network.
    There are two types of WPA authentication: WPA and WPA2. WPA is designed to work with all wireless network adapters, but it might not work with older routers or access points. WPA2 is more secure than WPA, but it will not work with some older network adapters. WPA is designed to be used with an 802.1X authentication server, which distributes different keys to each user. This is referred to as WPA-Enterprise or WPA2-Enterprise. It can also be used in a pre-shared key (PSK) mode, where every user is given the same passphrase. This is referred to as WPA-Personal or WPA2-Personal.
     Wired Equivalent Privacy (WEP)
    WEP is an older network security method that is still available to support older devices, but it is no longer recommended. When you enable WEP, you set up a network security key. This key encrypts the information that one computer sends to another computer across your network. However, WEP security is relatively easy to crack.WarningWe don't recommend using WEP. WPA or WPA2 are more secure. If you try WPA or WPA2 and they don't work, we recommend that you upgrade your network adapter to one that works with WPA or WPA2.

    VersaLink 7500 User Guide.pdf
    Having taken a quick look see in the  User Guide, it seems the 7500 is WPA capable; there's one way to find out for certain.
    Message Edited by bamboo on 09-16-2008 05:16 AM

Maybe you are looking for