Cs4 on XP sp3 move & re-draw

Hi
I run cs4 on xp sp3 and it runs good
but i don't like the re-draw behavior
for example if i zoom , and whith the hand tool i move the photo
photoshop re-draws the angles
is there a way to disable this behavior ?
thanks

In some cases yes, in some not. This is related to how the hardware accelerated functions are synced to the rest of the screen redraw. Depending on your screen layout and general graphics config, you may disable/enable the "wait for vsync" and similar options and see if it makes any difference...
Mylenium

Similar Messages

  • Soundbooth CS4 Problem with Quicktime MOV files

    I know that Soundbooth CS4 should support Quicktime MOV files but I just get a placeholder image and the video doesn't play.  What should I do?  I don't know if it is an issue with Quicktime or with Soundbooth.
    Thanks,
    Bruce

    It's probably an incompatible codec in the QT. If the audio isn't AC3 and on a separate track from the video this can happen. There are still a few applications out there that will write the audio into the video track, and QT will still play it that way.
    Are you attempting to edit video with Soundbooth?
    If you are it's not a good idea.
    You really should be using Premiere or Efter Effects to edit video, and leave Soundbooth for audio work.
    If you have QT Pro, try extracting the audio from the MOV and save THAT as an MOV of just the audio. SB should have no problem opening that/

  • Flash CS4 Link to a Movie Clip from inside another Movie Clip

    I am working on a Flash CS4 project which has 5 buttons with 5 corresponding movie clips all on the main timeline. Everything in functional so far.
    My problem is this: I want to be able to mouse click on a particular word in the text inside movie clip 4 ("mc4") and have it link to movie clip 3 ("mc3") (on the main timeline).
    I've tried many things, and I can't get it working.
    I have tried to highlight the word then link it to "mc3" in the properties panel where it says link (I successfully linked to an email address and to an outside website in other parts of the project)....
    I tried to link it in the properties panel to "mc3", I tried & "parent.mc3", "root.mc3";
    Linking it this ways seems to be the simplest, logical thing to do, but I don't know what kind of prefix it needs.
    Then, I tried making the word (inside mc4) an invisible button (button6) then linking it to the mc3, with it's actionscript in the main timeline with the other button functions.
    I tried duplicating mc3 and duplicating invisible button 3 and moving it's hotspot to over the word.
    I tried putting a copy of mc3 and the button inside mc4, with the actionscript also inside mc4.
    I tried duplicating mc3 and calling it mc6, and putting that inside mc4, with the actions back on the main timeline, and tried again with the actions inside mc4.
    I tried with mc6 and invisible button 6 on the main timeline, but that doesn't seem possible.
    I tried using this code from Adobe Actionscript 3.0:
    button6.addEventListener(MouseEvent.CLICK, startMovie);
    function startMovie(e:MouseEvent):void
            this.play("mc6"); [and I also tried with "mc3"]
    Nothing works!! Please, I would appreciate any suggestions!!
    Thanks,
    Suzanne

    If I limit my attention to the second sentence of your posting, then I suggest the following (borrowing from the rest of your posting)...
    If that invisible button6 is inside MC3 (on MC3's main timeline), atop the word you are trying to link to the movieclip, and you just want to make mc4 play by clicking that invisible button6, then assign the following code to the button6 inside MC3...
    button6.addEventListener(MouseEvent.CLICK, startMovie);
    function startMovie(e:MouseEvent):void
            MovieClip(this.parent).MC4.play();
    If I missed, then I missed following your explanation.

  • Adobe Media Encoder CS4 will not convert .mov video

    Hello,
    I have Adobe Media Encoder CS4 installed on my computer and I'm trying to convert a .mov video into a format that can be edited on windows movie maker and when I convert the video it converts the audio just fine, but there is only a black screen. Any ideas as to why this may be happening?
    Thanks in advance.
    John Marks

    Is this the information you wanted from Media Info? That's the text version of the examined file.Thanks.
    General
    Complete name                    : C:\Users\jmarks\Desktop\First Contour Airsoft Battle! 6-2011.mov
    Format                           : MPEG-4
    Format profile                   : QuickTime
    Codec ID                         : qt 
    File size                        : 1.52 GiB
    Duration                         : 17mn 43s
    Overall bit rate                 : 12.2 Mbps
    Encoded date                     : UTC 2011-06-27 20:18:32
    Tagged date                      : UTC 2011-06-28 19:41:34
    Writing library                  : Apple QuickTime
    Video
    ID                               : 1
    Format                           : AVC
    Format/Info                      : Advanced Video Codec
    Format profile                   : [email protected]
    Format settings, CABAC           : Yes
    Format settings, ReFrames        : 4 frames
    Format settings, GOP             : M=1, N=8
    Codec ID                         : avc1
    Codec ID/Info                    : Advanced Video Coding
    Duration                         : 17mn 43s
    Bit rate mode                    : Variable
    Bit rate                         : 12.1 Mbps
    Maximum bit rate                 : 12.1 Mbps
    Width                            : 1 280 pixels
    Height                           : 960 pixels
    Display aspect ratio             : 4:3
    Frame rate mode                  : Constant
    Frame rate                       : 29.970 fps
    Color space                      : YUV
    Chroma subsampling               : 4:2:0
    Bit depth                        : 8 bits
    Scan type                        : Progressive
    Bits/(Pixel*Frame)               : 0.329
    Stream size                      : 1.50 GiB (99%)
    Language                         : English
    Encoded date                     : UTC 2011-06-27 20:18:27
    Tagged date                      : UTC 2011-06-27 20:20:17
    Material_Duration                : 1063262
    Material_StreamSize              : 1609122968
    Material_FrameCount              : 31866
    Audio
    ID                               : 2
    Format                           : AAC
    Format/Info                      : Advanced Audio Codec
    Format profile                   : LC
    Codec ID                         : 40
    Duration                         : 17mn 43s
    Bit rate mode                    : Constant
    Bit rate                         : 128 Kbps
    Channel(s)                       : 2 channels
    Channel positions                : Front: L R
    Sampling rate                    : 48.0 KHz
    Compression mode                 : Lossy
    Stream size                      : 16.2 MiB (1%)
    Language                         : English
    Encoded date                     : UTC 2011-06-27 20:18:27
    Tagged date                      : UTC 2011-06-27 20:20:17
    Material_Duration                : 1063019
    Material_StreamSize              : 17008291

  • Precise movement and drawing of objects in CS6

    Hi,
    having used CS3 before, I've recently bought the CS6 package. I set all Preference settings they way they were in CS3 but I'm having difficulties moving a selected object in precise orthogonal (or diagonal) orientation. I'm used to seeing an "origin" alignment aid when I drag the object, usually at 0, 45, 90 or 180 degrees to its original position. This doesn't happen anymore in CS6, instead I get a myrad of alignment options to any other objects of anchors in sight, but not the important "origin" one. The same problem exists with the rotation tool - when I want to rotate an object quickly by 90 or 180 degrees, in CS3 I could just use the rotation tool and it would "click" into origin positions at 90 or 180 degrees. In CS6 I get an small window showing me the exact rotation degree, but to me it's pretty useless to know that I've just rotated the object by 179.6 degrees, but I can't get to the exact 180.
    I am aware that I couold always use the Transformation option and enter a precise value of either moveemnt or rotation, but for simple actions it was much quicker to use a select and drag or select and rotate tool.
    The pen tool is slightly better with the "origin" alignment aid, but still I get a lot more unwanted alignment options than before in CS3, distracting from quick and precise positioning of anchor points.
    I do a lot of quite technical drawing, more akin to CAD than "free" illustration, but never had such a problem with Illustrator in CS3.
    Is there a way to set up CS6 so it behaves the way I'm used to?
    Best regards
    Jeffrey Kubiak

    Thanks, and bugger! I had no idea Smart Guides were changed that much - if it ain't broke, why fix it?
    I've now read somthing about pressing teh shift key will bring up movement alignment in 45 degree increments. Pretty clumsy, as I often have the Alt key pressed as well when copying objects accross severy layers. I have Shift and Alt as the two buttons on the pen of my Intuos pad - I don't think I can press both at the same time (and even if I could it just makes things really awkward)...
    Oh and btw. when I asked the question I wasn't aware that I was on a user forum - I thought I was writing to Adobe's customer service team! They did really well at disguising the path of getting in touch with them and thus making you guys do the work for them!
    So sorry for not having much of a forum ettiquette in my very first posting.
    Cheers
    Jeffrey

  • Exchange 2010 SP3 Move Mailbox fails on every mailbox with Fatal error MapiExceptionJetErrorIndexNotFound has occurred

    We are currently running Small Business Server 2003 with Exchange 2003 SP2 and are migrating to Server 2008 R2 with Exchange 2010 SP3 as an interim before moving to Server 2012 R2 with Exchange 2013 SP1. The mailbox move reaches 95% before failing with the
    message "Fatal error MapiExceptionJetErrorIndexNotFound has occurred.
    Error details: MapiExceptionJetErrorIndexNotFound: Unable to copy to target. (hr=0x80004005, ec=-1404)
    Diagnostic context:
        Lid: 45095   EMSMDB.EcDoRpcExt2 called [length=78]
        Lid: 61479   EMSMDB.EcDoRpcExt2 returned [ec=0x0][length=75][latency=0]
        Lid: 23226   --- ROP Parse Start ---
        Lid: 27962   ROP: ropGetPropsSpecific [7]
        Lid: 21921   StoreEc: 0x40380   
        Lid: 31418   --- ROP Parse Done ---
        Lid: 45095   EMSMDB.EcDoRpcExt2 called [length=45]
        Lid: 61479   EMSMDB.EcDoRpcExt2 returned [ec=0x0][length=140][latency=0]
        Lid: 23226   --- ROP Parse Start ---
        Lid: 27962   ROP: ropGetReceiveFolderTable [104]
        Lid: 31418   --- ROP Parse Done ---
        Lid: 45095   EMSMDB.EcDoRpcExt2 called [length=69]
        Lid: 61479   EMSMDB.EcDoRpcExt2 returned [ec=0x0][length=48][latency=0]
        Lid: 23226   --- ROP Parse Start ---
        Lid: 27962   ROP: ropGetAllPerUserLtids [125]
        Lid: 17082   ROP Error: 0xFFFFFA84
        Lid: 29793  
        Lid: 21921   StoreEc: 0xFFFFFA84
        Lid: 31418   --- ROP Parse Done ---
        Lid: 22753  
        Lid: 21817   ROP Failure: 0xFFFFFA84
        Lid: 25738  
        Lid: 18570   StoreEc: 0xFFFFFA84
        Lid: 23370   StoreEc: 0xFFFFFA84
        Lid: 24302  
        Lid: 32494   StoreEc: 0xFFFFFA84
       at Microsoft.Mapi.MapiExceptionHelper.ThrowIfErrorOrWarning(String message, Int32 hresult, Boolean allowWarnings, SafeExInterfaceHandle iUnknown, Exception innerException)
       at Microsoft.Mapi.MapiUnk.ThrowIfErrorOrWarning(String message, Int32 hr)
       at Microsoft.Mapi.MapiProp.CopyTo(MapiProp destProp, Boolean reportProgress, CopyPropertiesFlags copyPropertiesFlags, Boolean copySubObjects, ICollection`1 excludeTags)
       at Microsoft.Mapi.MapiProp.ExportObjectHelper(IMapiFxProxy dest, PropTag[] tags, CopyPropertiesFlags copyPropertiesFlags, Boolean useCopyProps)
       at Microsoft.Mapi.MapiProp.ExportObject(IMapiFxProxy fxProxy, CopyPropertiesFlags copyPropertiesFlags, PropTag[] excludeTags)
       at Microsoft.Exchange.MailboxReplicationService.LocalSourceMailbox.Microsoft.Exchange.MailboxReplicationService.ISourceMailbox.CopyTo(IFxProxy fxProxy, PropTag[] excludeTags)
       at Microsoft.Exchange.MailboxReplicationService.SourceMailboxWrapper.<>c__DisplayClass7.<Microsoft.Exchange.MailboxReplicationService.ISourceMailbox.CopyTo>b__6()
       at Microsoft.Exchange.MailboxReplicationService.ExecutionContext.Execute(GenericCallDelegate operation)
       at Microsoft.Exchange.MailboxReplicationService.SourceMailboxWrapper.Microsoft.Exchange.MailboxReplicationService.ISourceMailbox.CopyTo(IFxProxy destMailbox, PropTag[] excludeProps)
       at Microsoft.Exchange.MailboxReplicationService.MailboxMover.FinalSyncCopyMailboxData()
       at Microsoft.Exchange.MailboxReplicationService.MoveBaseJob.ForeachMailboxContext(MailboxMoverDelegate del)
       at Microsoft.Exchange.MailboxReplicationService.MoveBaseJob.FinalSync(Object[] wiParams)
       at Microsoft.Exchange.MailboxReplicationService.CommonUtils.CatchKnownExceptions(GenericCallDelegate del, FailureDelegate failureDelegate)
    Error context: --------
    Operation: ISourceMailbox.CopyTo
    OperationSide: Source"
    This is happening on every mailbox we attempt to move. Any help would be appreciated

    Thanks for responding
    I'm already using BadItemLimit of 50. The largest corrupt message that was skipped is 10.
    We're on Small Business Server Standard Edition which only permits one mailbox store. I should mention that the interim machine (where Exchange 2010 is installed) is a Hyper V virtual machine
    Here is the entire message from the log:
    11/28/2014 7:18:07 PM [VRTL-SVR2008] 'PeacePresbyterianChurch.local/MyBusiness/Users/SBSUsers/Dev Mathura' created move request.
    11/28/2014 7:18:27 PM [VRTL-SVR2008] The Microsoft Exchange Mailbox Replication service 'VRTL-SVR2008.PeacePresbyterianChurch.local' (14.3.123.2 caps:07) is examining the request.
    11/28/2014 7:18:27 PM [VRTL-SVR2008] Connected to target mailbox 'Primary (d3391cdd-bc37-41ad-9e44-9f8880c47270)', database 'Mailbox Database 0224662151', Mailbox server 'VRTL-SVR2008.PeacePresbyterianChurch.local' Version 14.3 (Build 123.0).
    11/28/2014 7:18:27 PM [VRTL-SVR2008] Connected to source mailbox 'Primary (d3391cdd-bc37-41ad-9e44-9f8880c47270)', database 'PEACE-SERVER\First Storage Group\Mailbox Store (PEACE-SERVER)', Mailbox server 'peace-server.PeacePresbyterianChurch.local' Version
    6.0 (Build 7654.0).
    11/28/2014 7:18:38 PM [VRTL-SVR2008] Request processing started.
    11/28/2014 7:18:38 PM [VRTL-SVR2008] Mailbox signature will not be preserved for mailbox 'Primary (d3391cdd-bc37-41ad-9e44-9f8880c47270)'. Outlook clients will need to restart to access the moved mailbox.
    11/28/2014 7:18:38 PM [VRTL-SVR2008] Source mailbox information before the move:
    Regular Items: 20, 1.906 MB (1,998,818 bytes)
    Regular Deleted Items: 3, 7.803 KB (7,990 bytes)
    FAI Items: 20, 0 B (0 bytes)
    FAI Deleted Items: 0, 0 B (0 bytes)
    11/28/2014 7:18:39 PM [VRTL-SVR2008] Initializing folder hierarchy in mailbox 'Primary (d3391cdd-bc37-41ad-9e44-9f8880c47270)': 31 folders total.
    11/28/2014 7:18:40 PM [VRTL-SVR2008] Folder hierarchy initialized for mailbox 'Primary (d3391cdd-bc37-41ad-9e44-9f8880c47270)': 31 folders total.
    11/28/2014 7:18:40 PM [VRTL-SVR2008] Stage: CreatingInitialSyncCheckpoint. Percent complete: 15.
    11/28/2014 7:18:40 PM [VRTL-SVR2008] Stage: LoadingMessages. Percent complete: 20.
    11/28/2014 7:18:40 PM [VRTL-SVR2008] Mailbox 'Primary (d3391cdd-bc37-41ad-9e44-9f8880c47270)' contains 3 soft-deleted items (7.803 KB (7,990 bytes)). They won't be migrated.
    11/28/2014 7:18:40 PM [VRTL-SVR2008] Stage: CopyingMessages. Percent complete: 25.
    11/28/2014 7:18:40 PM [VRTL-SVR2008] Copy progress: 0/38 messages, 0 B (0 bytes)/1.906 MB (1,998,550 bytes).
    11/28/2014 7:18:41 PM [VRTL-SVR2008] Messages have been enumerated successfully. 38 items loaded. Total size: 1.906 MB (1,998,550 bytes).
    11/28/2014 7:18:43 PM [VRTL-SVR2008] Initial seeding completed, 38 items copied, total size 1.906 MB (1,998,550 bytes).
    11/28/2014 7:18:44 PM [VRTL-SVR2008] Final sync has started.
    11/28/2014 7:18:45 PM [VRTL-SVR2008] Stage: FinalIncrementalSync. Percent complete: 95.
    11/28/2014 7:18:46 PM [VRTL-SVR2008] Fatal error MapiExceptionJetErrorIndexNotFound has occurred.
    Error details: MapiExceptionJetErrorIndexNotFound: Unable to copy to target. (hr=0x80004005, ec=-1404)
    Diagnostic context:
        Lid: 45095   EMSMDB.EcDoRpcExt2 called [length=78]
        Lid: 61479   EMSMDB.EcDoRpcExt2 returned [ec=0x0][length=75][latency=0]
        Lid: 23226   --- ROP Parse Start ---
        Lid: 27962   ROP: ropGetPropsSpecific [7]
        Lid: 21921   StoreEc: 0x40380  
        Lid: 31418   --- ROP Parse Done ---
        Lid: 45095   EMSMDB.EcDoRpcExt2 called [length=45]
        Lid: 61479   EMSMDB.EcDoRpcExt2 returned [ec=0x0][length=140][latency=0]
        Lid: 23226   --- ROP Parse Start ---
        Lid: 27962   ROP: ropGetReceiveFolderTable [104]
        Lid: 31418   --- ROP Parse Done ---
        Lid: 45095   EMSMDB.EcDoRpcExt2 called [length=69]
        Lid: 61479   EMSMDB.EcDoRpcExt2 returned [ec=0x0][length=48][latency=0]
        Lid: 23226   --- ROP Parse Start ---
        Lid: 27962   ROP: ropGetAllPerUserLtids [125]
        Lid: 17082   ROP Error: 0xFFFFFA84
        Lid: 29793 
        Lid: 21921   StoreEc: 0xFFFFFA84
        Lid: 31418   --- ROP Parse Done ---
        Lid: 22753 
        Lid: 21817   ROP Failure: 0xFFFFFA84
        Lid: 25738 
        Lid: 18570   StoreEc: 0xFFFFFA84
        Lid: 23370   StoreEc: 0xFFFFFA84
        Lid: 24302 
        Lid: 32494   StoreEc: 0xFFFFFA84
       at Microsoft.Mapi.MapiExceptionHelper.ThrowIfErrorOrWarning(String message, Int32 hresult, Boolean allowWarnings, SafeExInterfaceHandle iUnknown, Exception innerException)
       at Microsoft.Mapi.MapiUnk.ThrowIfErrorOrWarning(String message, Int32 hr)
       at Microsoft.Mapi.MapiProp.CopyTo(MapiProp destProp, Boolean reportProgress, CopyPropertiesFlags copyPropertiesFlags, Boolean copySubObjects, ICollection`1 excludeTags)
       at Microsoft.Mapi.MapiProp.ExportObjectHelper(IMapiFxProxy dest, PropTag[] tags, CopyPropertiesFlags copyPropertiesFlags, Boolean useCopyProps)
       at Microsoft.Mapi.MapiProp.ExportObject(IMapiFxProxy fxProxy, CopyPropertiesFlags copyPropertiesFlags, PropTag[] excludeTags)
       at Microsoft.Exchange.MailboxReplicationService.LocalSourceMailbox.Microsoft.Exchange.MailboxReplicationService.ISourceMailbox.CopyTo(IFxProxy fxProxy, PropTag[] excludeTags)
       at Microsoft.Exchange.MailboxReplicationService.SourceMailboxWrapper.<>c__DisplayClass7.<Microsoft.Exchange.MailboxReplicationService.ISourceMailbox.CopyTo>b__6()
       at Microsoft.Exchange.MailboxReplicationService.ExecutionContext.Execute(GenericCallDelegate operation)
       at Microsoft.Exchange.MailboxReplicationService.SourceMailboxWrapper.Microsoft.Exchange.MailboxReplicationService.ISourceMailbox.CopyTo(IFxProxy destMailbox, PropTag[] excludeProps)
       at Microsoft.Exchange.MailboxReplicationService.MailboxMover.FinalSyncCopyMailboxData()
       at Microsoft.Exchange.MailboxReplicationService.MoveBaseJob.ForeachMailboxContext(MailboxMoverDelegate del)
       at Microsoft.Exchange.MailboxReplicationService.MoveBaseJob.FinalSync(Object[] wiParams)
       at Microsoft.Exchange.MailboxReplicationService.CommonUtils.CatchKnownExceptions(GenericCallDelegate del, FailureDelegate failureDelegate)
    Error context: --------
    Operation: ISourceMailbox.CopyTo
    OperationSide: Source
    Primary (d3391cdd-bc37-41ad-9e44-9f8880c47270)
    PropTags: [ContainerHierarchy; ContainerContents]
    11/28/2014 7:18:46 PM [VRTL-SVR2008] Relinquishing job.

  • CS4 Mac - File Dialog Moves Flash Window Down

    I have Flash CS4 10.0.1.545 Mac with OS X 10.5.6:
    I have the standard Workspace and when I select Import to import an image, the open file dialog in OS X slides down from the top of the stage and the entire Flash window that is holding my timeline and stage moves down about 100 pixels. I then import, then I click the top of the window to move it back up and it snaps back instantly as soon as I click on it before I drag it up.
    Anyone else getting this on the Mac?

    The only way to avoid this is to resize the dialog so that it's so short it doesn't go down past the Dock. Since this dialog spawns at the top of the stage, putting the timeline at the bottom instead of the top helps.

  • Indesign CS4 Very Slow - can move objects easily anymore!

    We are running CS4 - Even the most simple files are difficult open.  When opened, it is hard to move objects or type any characters. All we get is the Apple pinwheel.  We are running OS x 10.5 with 4 GB of memory.  We dont know what to do-please advise.

    I use CS4, mostly InDesign and Photoshop. I recently upgraded my iMac from 1 GB to 3GB of RAM, and everything was awesomely fast. CS4 worked well. Then I updated my system from 10.6.1 to 10.6.2, and immediately both InDesign & Photoshop developed a pause approx. every 5 seconds. No matter what I’m doing within either program, no matter how large or small the file, no matter how many or few applications I have open, I still get the very same beachball-spinning pause with every little thing I try to do, always. It’s very frustrating, I am having a lot of trouble getting any work done. The performance is way worse with 3 GB RAM than it was with just 1!
    I am not having this problem with the rest of my applications within my system, such as Mail and Safari, and I haven't really noticed it with Acrobat. It does seem that the update caused this with CS4. I've tried a couple of things, such as zapping the PRAM and closing a bunch of fonts but nothing has made the slightest difference.
    Does anyone have any suggestions?
    Cissy

  • Ai CS4 & CS5: Can't move objects, huge memory usage. Tips?

    Okay guys this is my first post here, so bear with me.
    I'm just wondering if anyone can give guidance or refer me somewhere I can find a solution. I both CS4 and CS5 of Ai installed on my mac. Everything works just great, until I attempt to move an object. Something simple as a single line with freeze my system if I attempt to move it from one location to another.
    It is odd. I can scale/transform objects without any issue. Its just when I click an object to drag it to another location my system will freeze for about 5 seconds. The object won't move still. I opened up Activity Monitor and noticed my Memory usage sky rocketed as soon as I tried to move the object.
    Is there configurations for memory allocation in Illustrator like there is in photshop?
    (PS I have 3GB RAM and a 120GB HDD with 30GB free space, 2.0 Intel Core 2 processor, it's a 2007 Mac Mini)

    How big is the file? and is it complex if so then you simply do not have the resources. Also you might have a font cache issue.
    But I think the lack of resources.

  • Flash CS4 Crashing when testing movie

    I am running into Flash CS 4 Professional crashing when I
    test (ctrl + enter) or publish my movie. The final swf file turns
    out corrupted as well. How do I fix this problem?? I am using Flash
    Player 10.

    Thanks for your reply. I have the 10.0.2 Flash update on my pc, I'm not sure about the machines at school but I'm guessing they do as well. I also have 6gb of ram, and am running 64bit windows7. The pc's at school are new Dell's running widows7 and I would think they have at least 4gb of ram. I've attached a file that crashed when I scrubbed the playhead on the pc's at school. I don't have that problem at home. Thanks again for your help.
    Dan
    jdehaan <[email protected]> wrote:
    I would check a couple things - whether the Flash CS4 installations (the ones that crash) have been updated to 10.0.2, and secondly what the machine specs are (how much RAM). There were a number of issues (including crashing while scrubbing) that were worked on at great length for the updater.  If the updater has been installed and the machines have more than 2 gigs of ram, it would be great if you could link to a file that crashes while scrubbing so I can take a look.
    Thanks.
    >

  • How do I export a Premiere Pro CS4 file as a *.mov file?

    Hi,
    I got Premiere Pro CS4 some time back and never got round to properly learning to use it.  I've picked it up again and have put together a small video sequence to ensure I can create something simple for a start and that it publishes fine but I've encountered a problem at the publishing stage (and I want to use it in After Effects so this is irritating me):
    * I've finished the sequence and it's on my timeline in unexported form
    * I then click File-Export-Media to go to the export settings
    * In the settings I export as a Quicktime *.mov file and both the video and audio check boxes are checked and ready to go
    * The quality is 100% and the output name has a legitimate path on my computer
    * I click 'OK' and the save window closes and a smaller window says 'Exporting data/file/whatever it should say'
    * I then search for the saved file on my PC,  first in the path the save screen said,  then using the search box in the windows button and I find it hasn't saved anything and told me it has done
    Does anyone know why this is happening and what I can do to properly save my video on my PC as a *.mov file?  I looked on Youtube and a tutorial suggested I was doing everything right but I just can't see why this isn't saving properly.
    Advance thanks.

    What version of Apple's QT Player do you have installed?
    What CODEC did you choose with your MOV Export?
    Good luck,
    Hunt

  • CS4 Mac Can I move a row in a table?

    I've made a table, but I now would like to move row 7 to occupy the position of row 2, thus pushing the others down so that the previous row two would now be row 3.  In Excel, I would select the row and then click and hold the selected row with the mouse and move it up or down as needed and it would relocate to the location where it is when I release the mouse button.  I can't seem to figure out how to do it in ID.  Any suggestions would be very welcome.  Thanks.

    I don't believe you can move rows. You can cut row 7, insert a row to the right of row 1 and paste row 7 over the blank, inserted row.

  • CS4...How do you draw/paint in pure black & white?

    Sorry for the dumb questions but I'm absolutely new to this stuff and I'm getting a lot of great info here which I'm keeping meticulous notes of...
    I've figured out how to paint with CS4 in colors and "near" black/grey/ white (by going to the extreme left of the color square in any given color but it still seems as if if it's influenced by the "parent" color whose square I happen to be choosing from within. Is there a "pure monochrome black/grey/white range" of tones that I'm missing somewhere and, if so, what's the procedure for toggling back and forth quickly/easily between this monochrome and color?
    Thanks.

    Since we don't have multiple mode images, you might consider doing your 'pen and ink' black and white image in one grayscale document and then saving that image again under a different name in rgb to do your color work. Make sure you are doing your grayscale work on a layer with transparency over a white background. That way you can save the grayscale image layer with transparency and overprint it over your color gouache work as a separate file, black over color, so to speak. Use your black layer in your rgb image as a guide then turn it off to save your color work to print separately.
    Actually, you may get just as good a result with less fuss by following the "0,0,0 is pure black; 255,255,255 is pure white" rule for your b&w illustration layer and do your colors on other layers.
    I don't have experience with 'Painter' but you might want to check into that program if you want another take on using watercolor or other illustration styles in your document.
    Post a link to your work here. We want to see the results of our recommendations please.
    Thanks,
    Ken

  • Premiere Pro/Media Encoder CS4 exports 0 KB movie, any solution?

    I have a (simple) project in Adobe Premiere Pro CS4 4.2.1 with two video files (same source/codec) and one audio file. The video file starts a few seconds before the audio file starts. There are no transitions and effects, besides filling the left audio channel. However, the problem is that all my attempts at exporting this project to a video file with h.264/aac, PAL widescreen, have been futile.
    The Adobe Media Encoder CS4 4.2.0 takes a considerable amount of time (~4.5 hours) and generates files (m4v & aac) of an appropriate size (~2.5 GB), but deletes those files as soon as it is finished with encoding. This leaves me with an empty y.mp4 of exactly 0 KB.
    I have fully updated both Premiere Pro and Media Encoder. My system is a MacBook with an Intel 2.4GHz, 4GB RAM, running Mac OS 10.6.
    Is there any known solution for this problem?
    ===== MEDIA ENCODER LOG =====
    Tue Jun 29 10:43:09 2010 : Queue Started
    - Source File: /Users/Matthew/Library/Caches/TemporaryItems/y.prproj
    - Output File: /Users/Matthew/y.mp4
    - Preset Used: Custom
    - Video: PAL, 720x576, 25 [fps], Lower
    - Audio: AAC, 192 [kbps], 48 kHz, Stereo
    - Bitrate: VBR, 1 Pass, Target 5.00, Max 6.00 [Mbps]
    - Encoding Time: 04:37:55
    Tue Jun 29 15:21:06 2010 : File Successfully Encoded
    Tue Jun 29 15:21:09 2010 : Queue Stopped
    ===== END LOG =====

    Welcome to the forum.
    First, a few questions:
    1.) What is the source footage's format/CODEC (both your Video and your Audio)?
    2.) Can you tell us about the I/O sub-system on your MB, i.e. your HDD's, their size, speed, free space (very important) and how you have them allocated?
    3.) Can you Export to another muxed format, as a test?
    4.) Can you Export as non-muxed (Multiplexing set to None) and get two usable elemental/elementary streams? Do each play fine? Again, this is just a test.
    As you observe, the two streams are first created, and then when complete, they are muxed into one file with both the Audio and Video stream. Something is causing the muxing to not complete. This could be an issue directly with AME, or perhaps with your H.264 CODEC, or something like free space on your target HDD.
    Good luck,
    Hunt

  • Export  Premiere Pro CS4 file into QuickTime Movie

    Hello!
    I am a student at the Art Institute Online program.  I am taking a video editing class using Premiere Pro CS4.  I successfully completed my video which needs to be saved to display in Quicktime; however, I am not able to upload the file to my class discussion because the file is too large.  The size of my Tfile zipped is 169,761 KB. Is there anything anyone can recommend?
    Thanks much,
    Annette

    You need to reduce the bitrate to reduce the file size.
    It is okay to then ZIP the file to make it even smaller for uploading to a server, however people will have to then download it and unzip it to watch.
    You will also find links to many free tutorials in the PremiereProPedia that will quickly show you how things are done in Premiere Pro.
    Cheers
    Eddie

Maybe you are looking for

  • SAP R/3 System Installation

    Hi, I am new to SAP. I would like to learn SAP R/3 system and practice that from my home. So what type sap gui should I download in my PC and where can I get that downloads? I need the sap gui with help options too. Can I download only IDES? What is

  • Unable to start the database(Process m000 died, see its trace file)

    Hi, Oracle Version:10.2.0.1 Operating System:Linux Hi suddenly the database went down and in alert logfile it is showing error like this. Fri Feb 18 01:40:51 2011 Process m000 died, see its trace file Fri Feb 18 01:40:51 2011 ksvcreate: Process(m000)

  • How to Transport a Role

    hello, Experts.  I have a small problem. I have added a New Workbook to Developer Role,  i want to Transport it to QA .  what are the steps i need to do. i went to Transport Connections and in that i selected the Role which i want to Transport ,  and

  • Sun Ray @ home  - VPN bad performance

    Hi All we've setup a test configuration with a Sun Ray Server (dedicated network) a CISCO PIX 501 and one DTU SR2. The screen refresh performance on the DTU is very bad. Other DTUs, connected directly to the SRSS are fine. We've played around with th

  • List of approvers in SRM

    Is there easy was to get list of approvers and levels of approval out of SRM by cost centre