CS4 photomerge cannot align my images- period...

I have downloaded the plug-ins and reset my preferences. Still: the message "some images cannot be aligned" and no suggestion on how to fix the problem. I have always successfully used CS3 toi merge edited tif files. Any other ideas except to reload CS3

Hi
Can you explain a little further what these plugins do? I guess the key here is Photomerge UI. I have CS5, and I sometimes miss the interactive alignment feature of the Photomerge from Elements. Interactive alignment is not possible via the Photomerge feature of CS5, although it is possible to move pictures around and auto-blend them. Would installing the Photomerge UI to my CS5 restore the interactive alignment feature of the Photomerge I had in Elements?
Best regards,
Antero

Similar Messages

CS4 Photomerge Won't Align Images Correctly

I've used PS CS4 successfully several times to create panoramic images. I decided to re-do a panorama that I had created with an older version a few years ago, but CS4 won't align the images correctly. It keeps trying to make the horizon into a wavey line. It also is not giving me the option of adjusting its results. Is there anything I could do to fix this?

You probably don't want to hear this, but Photoshop CS5 apparently has improved horizon handling over CS4. I've noticed the horizons in my panos are coming out better with CS5.
That said, have you tried "Cylindrical" mode instead of "Automatic"?
-Noel

Cannot Compare 2 images in CS4

It appears I cannot compare 2 images with different file extensions in CS4.
I am trying to compare a cr2 and psd image but cannot find how.
Need advice.

I assume you're looking to make a visual comparison...
Open both images in Photoshop.
Use the button at the top that will tile both Windows side by side:
If, instead, you're looking to place one image over the other then blink back and forth or maybe use Difference mode mixing to see what pixels are different and by how much, make the first image current, Select - All, Edit - Copy, make the second image current, Edit - Paste. Then make the Layers panel visible and manipulate the visibility or mixing mode of the top layer.
-Noel

PS CS4 - photomerge

I tried 4 times consequently to stitch 4 images in Photomerge activated from Bridge - with same settings (auto and defaults i.e. blending images on, vignette removal off, distortion correction off). I was surprised of the result because each time I tried PS generated different panorama. Just to make sure I thoroughly checked if the stitch settings were really the same - they were... Am I missing something essential?

PhotoMerge appears to have been broken in the move to CS4.
Whilst I am glad that PhotoMerge in CS4 is working for SOME, on my two main, quite different, XPP/3 systems (one with supported 3D card, one without) I have been unable to get CS4 to create ANY panoramas.
In CS4, as shipped in the 'Master Collection', attempting to merge only two images that, on the same systems [right now, TODAY!] are merged by CS3 (and ptGUI, and APP) results only in a series of processing msgs during which a file named something like "unnamed_panorama1" appears as a tab. When processing stops, that tab vanishes. Sadly, no trace of this file is seen in the recent file list, nor anywhere on the hard-drive.
Yes, Default Photomerge entries are being used (as well as all possible combinations of geo-correct, vig-removal, various projections etc).
Repeating this merge attempt with 'tab view' disabled results in the same sequence (only the evanescent image is a free floating one).
Initially, my thought was that this was because I had not yet 'activated' CS4. Sadly, 'activation' produced no change: Images are energetically being processed, but the final result disappears.
Copying the 'manually align' option from CS3 into CS4 results, at the end of various processing messages, in an ErrMsg popping up saying that "CS4 was unable to automatically align 'some' images.
Um, there were only two images, and was not the point of selecting 'manually align' images to MANUALLY align images?
CS4 then displays a completely transparent "untitled_Panorama1" image and LOCKS.
Random clicking on the interface produced a "This program has ..." error (I saved the error dump, if anyone from Adobe is interested) and died.
To re-iterate, I have yet to be able to create the simplest two-image panorama with CS4 on two, quite different, XPP/3 systems.
This failure is with images that CS3 has no trouble with on these same systems, at the same time as CS4 fails.
Something is clearly wrong here.

Aligning an image within Text

Is there a way to wrap an image within a Text Box? For example, in standard html I would just align an image to the "right" or "left" and insert padding accordingly. The text would then just wrap around and under. Is there an equivelent action in Captivate 5.0?
I've been just putting text boxes on the page and leaving room and saving space outside of the text box for the image, then put another text box underneath it to make it appear as if it is "wrapping"?
If not - any idea when this functionality will be appearing? Perhaps in 6.0?
kstagg

If you want to see something like this in Cp6 you need to request it as an enhancement.
This is the official Adobe request page: https://www.adobe.com/cfusion/mmform/index.cfm?name=wishform&product=5
With this site you cannot see what others have logged.
And this is the unofficial site that we use and Adobe watches: http://captivate6ideas.ideascale.com/
With this site you can see all the enhancement ideas and vote for the ones you like, as well as add your own if nobody else has already done so.

Please confirm, I cannot open RAW images in CS2 from EOS 50D

Platform: XP Pro SP3
After shooting my first session using the new Canon EOS 50D DSLR I cannot open RAW images in Photoshop CS2. Canon told me there was a free upgrade available to replace my current RAW editor ver. 3.7 BUT it appears from what I've read that I must buy CS4 to open RAW files created in the new Canon 50D. Thank you for your efforts.

> ... from what I've read that I must buy CS4 to open RAW files created in the new Canon 50D.
Considering the $$ you paid for the 50D, updating CS2 to CS4 for the sake of all the improvements in ACR would be well worth the $200.
my CA$0.02 :)

When a pop up window comes up it is - search bookmarks and history window! I cannot log into my bank as login button should open new window to log in but I get the search page. I cannot see larger images as again I get the search bookmarks and history pa

When a pop up window comes up it is - search bookmarks and history window! I cannot log into my bank as login button should open new window to log in but I get the search page. I cannot see larger images as again I get the search bookmarks and history page etc. Happens on all options that should open new page. I am so frustrated, this has been happening since Firefox updated itself 2 days ago to Mozilla/5.0 (Windows; U; Windows NT 6.0; en-GB; rv:1.9.2.8) Gecko/20100722 Firefox/3.6.8 ( .NET CLR 3.5.30729; .NET4.0C) was fine before that. using windows vista. Can you please advise what I should do? Also can you go back to previous version? Error console eg
Warning: Error in parsing value for 'cursor'. Declaration dropped.
Source File: https://ib.nab.com.au/nabib/styles/menu_nab.css?id=009
Line: 116
ib.nab.com.au : server does not support RFC 5746, see CVE-2009-3555 and Warning: Selector expected. Ruleset ignored due to bad selector.
Source File: https://ib.nab.com.au/nabib/styles/nabstyle.css?id=014
Line: 837
== This happened ==
Every time Firefox opened
== 2 days ago after update.

Do you have that problem when running in the Firefox SafeMode?
[http://support.mozilla.com/en-US/kb/Safe+Mode]
''Don't select anything right now, just use "Continue in SafeMode."''
If not, see this:
[http://support.mozilla.com/en-US/kb/troubleshooting+extensions+and+themes]

Is there a way of aligning the images in iweb photoalbums other than have them be a square?I have them at same height and resolution but htere is a default that shrinks them and aligns them at the bottom.Thanks.

Is there a way of aligning the images in iweb photoalbums other than have them be a square?I have them at same height and resolution but htere is a default that shrinks them and aligns them at the bottom.Thanks.

So how did you do it?
by understand what iweb widgets do, in this case setting gridEntry widget's scalMode preference from fill to fit.
then reset the displayed image, so it fits in the display area even if it's portrait aspect.
however, i found some glitches in gridEntry widget that's quite strange... but all fix-able.
perhaps, iweb experts (whose had poked at my example) here can chime in.

Cannot stamp multiple images anymore

running v 3.2.1 and I cannot stamp multiple images any more. I can lift and stamp one at a time but when I select to end and attempt to stamp it only stamps the last image in the batch. any help is appreciated!
Thanks Dave

Hello Dave,
Check if you have "Primary only" activated.
That looks like a case of "Primary only".
If you have set the "Primary only"-flag, any changes only apply to one image of the selection.
Uncheck the button with the "1" in a square above the film strip.
You can also deselect this option from the "Edit" menu.
Regards
Léonie

Cannot move some images in iPhoto to desktop

I cannot move an image from iPhoto to my desktop. Also, when I click on the image in iPhoto to enlarge it, I get an exclamation point. When the image is small size in iphoto, I can see it. But if I click on it to enlarge it in iphoto, I get the exclamation point. Don't know why this is happening? I have Iphoto 09, version 8.1.2 (424) My goal: Be able to move any image in iphoto to my desktop and not get the exclamation point anymore.
Message was edited by: rjduffy61

The ! turns up when iPhoto loses the link to the original image - and that's why you can move it to the desktop.
Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Repair Database. If that doesn't help, then try again, this time using Rebuild Database.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. (In early versions of Library Manager it's the File -> Rebuild command. In later versions it's under the Library menu.)
This will create an entirely new library. It will then copy (or try to) your photos and all the associated metadata and versions to this new Library, and arrange it as close as it can to what you had in the damaged Library. It does this based on information it finds in the iPhoto sharing mechanism - but that means that things not shared won't be there, so no slideshows, books or calendars, for instance - but it should get all your events, albums and keywords, faces and places back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.
Regards
TD

OSX Mountain Lion - Cannot change desktop image

I used an image I'd downloaded as desktop wallpaper. I have tried to change it to the default image, other images, sold colours, but the same image always returns after I reboot (warm and cold boots). Note that I can change the desktop image, but it always reverts back to the old image. The changes do not stick. I cannot locate the image in Finder. Any ideas?

I have the same situation as Marc; however, I do not have access to images. The multicolor circle keeps turning.
This application (Desktop & Screen Saver) is not working anymore.
Thank you.
Guillermo

When I open an image in Photoshop, I cannot see the file. The thumbnail in on the right, but I cannot see the image on the work area. I am using Windows 8

When I open Photoshop CS6 I cannot view the image. The thumbnail is visible on the right hand side and the work area shows the file information, but no image. I have updated PS, my driver. It is the same for both jpg or RAW.

Be sure your graphics drivers are up to date. Try disabling GPU acceleration in the preferences then restart Photoshop.
Benjamin

I cannot move photos from iphone to MacBook. I get an error message that says: Error downloading image. iPhoto cannot import your images because there was a problem downloading an image. How can I fix/remedy this?

I am receiving an error message every time I plug my iPhone 4S into my MacBook: Error downloading image. iPhoto cannot import your images because there was problem downloading an image. How can I fix/remedy this?

try Image Capture - in your applications folder
LN

Cannot view jpeg images in windows photo viewer (windows 7 32 bit)

When i open any jpeg image in windows photo viewer, it opens but shows nothing, only black plain image is displayed like below.
I am using adobe cs5 bridge and cannot preview the images in bridge as well, instead same black preview is shown.
Any one can help please....this is getting too much irritating for me.
Thanks!

This has helped me with a similar situation. http://answers.microsoft.com/en-us/windows/forum/windows_rt-pictures/windows-photo-viewer-suddenly-w...

Cannot view certain images

I cannot view certain images, and I have already checked my settings a few times over. This only occurs occasionally with deviantart. Previously I came across a way to correct this, but it's been so long now that I've needed to adjust it that I've forgotten. So my question: Is there a way to adjust things so that the differently sized images appear regardless of pixel amount? It tends to be either only the preview or fullsize image on DA. Also, though I've Adblock Plus now, this happened even before.
== URL of affected sites ==
http://deviantart.com

It is possible that you accidentally clicked the 'Block Images' item in the right click context menu while trying to save an image.
Check the image exceptions: Tools > Options > Content: Load Images: Exceptions - See [[Options window - Content panel]]
A way to see which images are blocked is to click the favicon (''Site Identification'' icon) on the left side of the location bar and click the "More Information" button.
This will open the Security tab of the ''Page Info'' window (also accessible via Tools > Page Info).
Go to the ''Media'' tab of that Page Info window.
Select the first image and scroll down though the list with the Down arrow.
If an image is grayed and there is a check-mark in the box ''Block Images from...'' then remove that mark to unblock the images from that domain.

CS4 photomerge cannot align my images- period...

Similar Messages

Maybe you are looking for