CS4 Photoshop error on windows 7 pc

what is causing error 148:3 when starting CS4 Photoshop on a windows 7 pc?

http://forums.adobe.com/message/6165844
http://forums.adobe.com/message/1659495

Similar Messages

CS4 Install errors in Windows 7 - Need help!

I just got this great new ASUS G73JW laptop with windows 7 home premium on it, 8 gigs of Ram, Intel Core I7, Nvidia 480 video card. One of my biggest reasons for getting it was to run CS4 Master Collection on it so i can work from the road. However, each time I try installing CS4 I get the same errors about certain applications not being installed. It comes up with an error and says "could not install the following applications" and of course all the applications it can't install are Photoshop, Flash, Premere, After Effects, etc. Bascally none of the programs will install with the exception of Media encoder, flash player and media player.
I've gone on the interenet to find help and have tried using the clean tool to clean out the entire installation, I tried running it in different modes for Vista, and XP but everytime it comes up with the same errors. Can anyone help with some ideas on how to install this successfully?

I'm having a similar problem. I'm trying to load CS4 Design Premium onto a Toshiba i7 running Windows 7, 4GB ram. An installation error appears about halfway through Disk 1. Photoshop, Dreamweaver, InDesign, and Illustrator will not install. Adobe Support Advisor identified the error as UninstallColorProfilesRollback and referred me to kb403891.
I was unable to follow Solution 1 because I didn't have permission to remove the files. I followed Solution 2, but was still unable to remove the files described in solution 1.
I would appreciate any possible assistance.

CS4 Install errors in Windows 7 - 'ColorProfilesRollback' issue

I have tried to install CS$ Design Premium about 8 times! Keep getting, "error as UninstallColorProfilesRollback and referred me to kb403891". I have tried Solution 4 times. Does not help. Finally clicked, "continue" installation, and it appears to have installed "with errors"; "you may not have full functionality"... message. Can anyone help?

Hi Jtown,
Lets go ahead and try the below suggestions and check if that helps.
Solution 1: Rename the following files:
C:\Program Files\Common Files\Adobe\caps\pdb.db
C:\Program Files\Common Files\Adobe\caps\Media_db.db
Make sure you dont touch caps.db under the same folder. Now run the installer again and check.
Solution 2: Give full permissions to the below locations:
C:\Windows\System32\Spool\Drivers\Color
C:\Program Files\Common Files\Adobe\Color\Profiles
C:\Program Files (x86)\Common Files\Adobe\Color\Profiles
C:\Program Files\Common Files\Adobe\Color\Settings
C:\Program Files (x86)\Common Files\Adobe\Color\Settings
C:\Users\[username]\AppData\Roaming\Adobe\Color
C:\Users\[username]\AppData\Local\Adobe\Color
Cheers!!
Arpit

Photoshop CS4 Extended crashes in Windows XP whenever I save

I hope someone can help me, a beginning Photoshop user.
It crashes almost always whenever I try to save. I have installed the 11.0.1 patch. GPU is turned off.
Here are the details of my system:
Toshiba Satellite A105 running Windows XP 5.1.2600 Service Pack 3.
1.86 GHz 2.99 GB RAM
C drive (that is used for Photoshop) is 92.92 GB with 53.58 GB free space. I've defraged the drive.
Video display card: Mobile Intel(R) 945 GM Express Chipset Family version 6.14.10.4436
I have other applications off when I am using Photoshop.
I typically am working from NEF files approx. 30 MB
It's really frustrating - and is making it very difficult for me to learn the software.
Thanks.

Thanks - I'm learning how to use this forum. Here's what I thought I had sent:
Here's a typical application error record in the event viewer log:
Faulting application photoshop.exe, version 11.0.1.0, faulting module ole32.dll, version 5.1.2600.5512, fault address 0x0001d7e6.
Does this tell us anything?
and (for the second post):
In the event viewer log, I also found the entry below, before I installed the Photoshop update:
The application, C:\Program Files\Adobe\Adobe Photoshop CS4\Photoshop.exe, generated an application error The error occurred on 01/31/2010 @ 22:44:40.921 The exception generated was c0000005 at address 7756BB9B (ole32!CoWaitForMultipleHandles)
The above entry came about 20 seconds after this application error record:
Faulting application photoshop.exe, version 11.0.0.0, faulting module ole32.dll, version 5.1.2600.5512, fault address 0x0008bb9b.
The faulting module ole32.dll seems common to all the photoshop application error messages. Is this a clue?

When installing Adobe Photoshop CS3 on Windows Vista I get this error "Setup has encountered an erro

When installing Adobe Photoshop CS3 on Windows Vista I get this error "Setup has encountered an error and cannot continue. Contact Adobe Customer Support for assistance. Internal Error 2739" I have used the cleanup script included in Adobe Photoshop CS3 installer, and have removed all traces of Adobe apps including the beta versions and Acrobat 8 pro, and I still get the same error, how can I install this application? is there any way or do I have to reformat and reinstall windows?

Hello everyone,
I was having the same issue:
"Setup Error. Setup has encountered an error and cannot continue. Contact Adobe Customer Support for assistance. Quit."
If you receive this error also, press Quit and follow these steps:
1. Start
2. Control Panel
3. Administrative tools (in classical view)
4. Event Viewer
5. Application
You will see something like this:
Double-Click for error (emphasized by red color). I have an error like this:
"Error 1327.Invalid Drive: E:\" if you have the same or e.g. Drive F:\ ir whatever letter, you should solve this problem extremely easy - just insert USB-flash into computer (it will launch as E\ or whatever disk) and than run installation again. It will work than.
Setup doesnt start if disk is offline.

Photoshop CS4:Fatal error

This pops up when I open my Photoshop CS4:
Fatal error - missing component: /Library/Application Support/Adobe/Adobe Version Cue CS4/Client/4.0.0/VersionCue.framework.
Any ideas on what i can do? happens when I open a project.
Thanks

Ok, after reading tons of threads trying to get a simple answer here are the main points:
You do not need to reinstall anything.
Locate a backup , Time Machine or anyplace where you may have a backup of your Adobe Suite Install.
In both Locations( Hard Drive and Backup) Navigate to: Macintosh HD > Library > Application Support > Adobe > Adobe Version Cue CS4 > Client
Once there you will see your problem Adobe is looking for folder named 4.0.0 and you have 4.0.1
Fix: Find the backup and copy over folder named "4.0.0" , Problem solved!
Open up Adobe Photoshop CS4 and problem should be fixed.
Observations:
Upon inspecting folder 4.0.1, I did notice there were exactly 5 (.framework) files just like in folder 4.0.0 with the exception of 4.0.0 having a "Dictionaries" folder. where 4.0.1 has this folder missing. I am not sure how important this particular folder may be, However if by any chance you do not have a backup It might be possible to just change the 4.0.1 folders name to 4.0.0. and this just might work, In theory that is . Good Luck!

I have photoshop CS4 with the newest update. I'm a photographer and just purchased the new canon 7d mk II. Today, I shot some photos on raw but am unable to pull them up in photoshop. A window pops up saying "photoshop cannot recognize this type of file.

I have photoshop CS4 with the newest update. I'm a photographer and just purchased the new canon 7d mk II. Today, I shot some photos on raw but am unable to pull them up in photoshop. A window pops up saying "photoshop cannot recognize this type of file. The thumbnails are white with a blue and white CR2 on them. Please help.

Adobe Camera Raw 5.7 is the latest for Photoshop CS4 Adobe - Photoshop : For Windows
The problem is that your new camera is supported by ACR 8.7 and only Photoshop CS6 and up supports this version.
So if you do not want to buy CS6 or subscribe to the $10/month Photography Program, you have to convert the CR2 files to DNG to work on them. Your original CR2s are untouched in the process, you just can't directly edit them in CS4, only the DNGs.
Maybe Canon offers editing software for their CR2s, but CS4 is not going to be updated and there is no way around that.
It's not what you want to hear, but that's the situation so far.
Maybe Elements or Lightroom has updated raw support for your camera, so I encourage you to visit those forums and ask.
Gene

Error message "Photoshop cc requires windows 7 or later"

Hi when using Bridge cc and clicking to open any image the error message appears "Photoshop cc requires windows 7 or later"
I am using windows 8.1
P

Even if it were possible, it would not be wise to have XP connected to internet, because it is not maintained any more, the latest security update was for Internet Explorer (I think for the SSH hole), and now all maintenance is stopped. I have technical installations with XP, that I cannot upgrade to W7 or 8, and I have disconnected internet for safety.
So do as Csound ( ) says, when possible.

Unexpected error closing Photoshop CC 2014 (windows)

I just downloaded PS CC 2014 and everytime I open it I get an unexpected error which is force closing PS. There's no code attached to the error, its just force closing PS.
PC Specs:
Alienware X17
Windows 7 64 bit

System
Provider
[ Name]
Application Error
EventID
1000
[ Qualifiers]
0
Level
2
Task
100
Keywords
0x80000000000000
TimeCreated
[ SystemTime]
2015-01-31T19:06:22.000000000Z
EventRecordID
67749
Channel
Application
Computer
Leeanna-PC
Security
EventData
Photoshop.exe
15.2.2.310
5480338c
amdocl64.dll
2.4.595.10
4df18dd2
c0000417
0000000000361c68
1fb4
01d03d88f990405c
C:\Program Files\Adobe\Adobe Photoshop CC 2014\Photoshop.exe
C:\Windows\system32\amdocl64.dll
3e79aee6-a97c-11e4-880d-5c260a71eb30

Photoshop Elements 11 Windows 7. Clicking blue Photoshop icon doesn't lunch an application. No error messages.

Photoshop Elements 11 Windows 7. Clicking blue Photoshop icon doesn't lunch an application. No error messages. I removed and re installed an application. Not a solution.

This is 64 bit OS

I'm doing a transfer from one macbook pro to another. I have CS4 Photoshop Extended. When I go to open it on my new computer it says error 150:30.

I'm doing a transfer from one macbook pro to another. I have CS4 Photoshop Extended. When I go to open it on my new computer it says error 150:30.

Don't try transferring Adobe software. It rarely works and usually breaks the activation mechanism (150:30 error).
Uninstall, run the Cleaner tool then re-install from scratch.
Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6

CS4-Photoshop is quitting when launching on OS 10.6.8. After BLUE Photoshop launch-window appears, it quits after 3 seconds...

CS4-Photoshop is quitting when launching on OS 10.6.8. After BLUE Photoshop launch-window appears, it quits after 3 seconds...

Moving this discussion to the Photoshop General Discussion forum.

I have Adobe CS4 Photoshop for Windows (PN 65015634 - from 2008) -- Can anyone let me know if this is compatible with Windows 7?? Thanks!!

I have Adobe CS4 Photoshop for Windows (PN 65015634 - from 2008) -- Can anyone let me know if this is compatible with Windows 7??
Many and sincere thanks!!

You need to have your computer looked at for upgrading and evaluate your third party hardware, software and files.
To fix your issue is too complicated and lengthy to go into all of it here, it will require the services of person very familiar and experienced with Mac's to first recover your data and then restore OS X back to a functional state which may or may not require new hardware/software installed.
You can hire the services of a local Mac computer support technician experienced in these matters.
Have them look at your Wifi security/speed, RAM amount, extra storage and computer backup proceedures in the process.
Good Luck.

Can't get fonts from windows to come up in CS4 photoshop

Hello, I have CS4 photoshop extended, and i can't get the fonts that come with Windows Vista to come up on CS4 photoshop also i have illustrator CS4 and i get the same response on the fonts over there. I tried copying the fonts from windows to the fonts folder in adobe and it just kicks it out. The fonts i am trying to load is Arial Black,Arial bold, helevitica, just to name a few, i don't want to have to pay for those fonts if i already have them. Any suggestions? Tim McCuiston

Be aware that some fonts are listed under different names in Adobe programs and that some show the main name to the left window and the variations in the right.

How to install the CS4 design standard in Windows 7?

I bought the CS4 design standard and install it in Win XP.
Recently, I upgraded my OS to Win7.
However, when I wanted to reinstall the CS4 design standard, it failed.
So I tried just install one function of that design standard : Acrobat 9.0 Pro.
That installation succeeded. But when I want to use it,
it shows that I need to initiate with other CS4 functions, such as CS4 photoshop to make it work.
Is anyone can help me? Thanks!

Hi s2007,
What was the error message that you encountered when you tried to install CS4?
We might have to check the install logs for the installation failure.
Please see Troubleshoot with install logs | CS5, CS5.5, CS6 - http://helpx.adobe.com/creative-suite/kb/troubleshoot-install-logs-cs5-cs5.html for information on how to review your installation logs
You might also want to try the following steps:
> Enable the hidden Admin Account on Windows 7 ( Ref : http://www.howtogeek.com/howto/windows-vista/enable-the-hidden-administrator-account-on-wi ndows-vista/ )
> Disable all Non-Microsoft Startup Services. (Ref : http://helpx.adobe.com/x-productkb/global/disable-startup-items-services-windows.html )
> Disable all the Antivirus softwares like CA, Norton,Mc Afee etc. temporarily from the computer.
Reboot and try installing in the new enabled Admin user account and check.
Regards,
Rave

CS4 Photoshop error on windows 7 pc

Similar Messages

Maybe you are looking for