CS4 poor dialog window performance with huge screen dual 30 inch

Hi, I am running dual 30 inch monitors each one at 2560x1600 resolution, on windows xp sp3 on an nvidia quadro FX 3700M (dell precision M6400 laptop)
If I use CS4 from the single laptop screen, everything is fine. However, whenever Im on the huge dual screen desktop any dialog box activity has a very poor performance. For example, I select File>New and the dialog window takes some two to three seconds to draw on the screen... it might not seem like a big problem but it is very very annoying since I am used to the snappy response of the user interface from years of PS use. It really affects my workflow since I work with many files at the same time.
Also, the bigger the dialog window the slower it takes to appear. If I select File > Save for Web and Devices, that dialog window will take up to five seconds to appear on the screen.
The problem seems to get worse the longer the OS has been working, ie. if the PC is freshly booted the problem seems a bit lighter. So it might be related to video card memory or something.
Here's what I have tried so far to solve this:
Since what I'm using is a laptop, the driver choices are limited, however I've been able to force install the 181.20 version of the nvidia driver, but it made no difference. All the official driver versions (176 series) from Dell also have the problem.
The problem doesn't seem related to Photoshop's use of the GPU as the problem remains while the GPU acceleration disabled.
This problem is also present in PS CS3 as well as CS2 CS1 and version 7 which are all I am able to test.
I was able to reproduce this problem on a desktop computer with the same setup on an nvidia quadro FX 5500 card. The dialog box window performance is really terrible.
I did not notice this problem in any other application that spans the two screens, even high end 3d ones.
Ok well it seems from my testing that Photoshop is simply bogged down by having such a huge desktop area to work with. It is really disappointing since PS was my only reason to spend so much money on this dual 30 inch screen setup.
Has anyone else noticed this? Are there any other suggestions? Any adobe support on this?
Thank you

I have tried with both open gl enabled and disabled (edit > preferences > performance)
The problem is present even in Photoshop version 7, I think that one didnt even notice the presence of a 3d accelerator chip.
Both video cards tested have 1GB of video ram.
Thanks.

Similar Messages

My dialog windows appear off the screen...please help

Many of my dialog windows such as paragraph styles, or when I place items appear off the screen (I see the bottom of the window, but not the top which means I cannot move them around) - Any suggestions?
Laurie

I am having the same issue. I am using CS6, and my 'Effects' box is off the screen and unusable. I have tried resetting the workspace, changing the workspace, restarting the program, rebooting the system, switching between multiple and single monitor....all with no effect. The dialog box is always in the same place; in the upper left of the screen. Any further help would be appreciated.
Mac OS X 10.8.2
InDesign CS6 with the latest updates
15" MacBook Pro Retina
FIXED: As soon as I posted this, I had a thought. While that dialog box was active, I went to System Preferences>Displays>Gather Windows. May or may not work for original poster.

Poor play/pause performance with iPhone mic button clicker

I am experiencing poor performance with my headset button on my 3G iPhone. The pause / play / skip track functionality works very intermittently for me. I have tried all different kinds of click speeds with no improvement.
It seems to be worst when the iPhone is locked and I click once to resume playing.
I am running 2.1 software and doing a hard restart does not help.
Faulty headphones?

the iphone clicker wears out really quick...
you might want to invest in some non apple headphones, or perhaps just a new microphone and clicker, like the shure one that's just come out...
http://www.iphoneuserguide.com/apple/2008/09/19/iphone3g/convert-your-headphones -to-a-mobile-headset-with-the-shure-music-phone-adapter-for-iphone/

BEx Report Performance with selection-screen input

Hello Gurus,
My Bex report is working fine when the report had run with out PLANT filter in the selection-screen but when report had run with plant in the selection-screen , report running for forever.
Please let me know what I need to do improve the performance.
Saleem.

Hi Saleem, Just a few thoughts;
1. Check the M-table in RSD1 for 0PLANT. In Table View edit any blank or null values. Run the same restrictions you apply in the query at Info provider level > Display Data. If there's any lapse; you can judge where exactly the problem lies.
2. If you are using Infocube & that your master is >20% fact; you can declare the Info object as 'Line Item Dimension'.
3. Create Variants. Esp. if you are running the query for same set of data. Try Variable Preselection: You can restrict both the values + varaiables in the filter level. When you execute the values will be visibly pre-selected in selection screen.
4. As discussed in previous messages, running a SQL trace using RSRT may prove useful.

Help! Poor network (LAN) performance with T2000, Solaris 10, GB

Hi-
I'm having a problem that I'm hoping someone can help me with.
We've recently purchased a few of the T2000 boxes, with the ipge (GB) cards in them.
The problem we're having is that we can't seem to get more than 500 mbit/s performance out of them, at least the way we're measuring them.
So, I have 2 questions... (a) how can we validate that we are in fact getting GB performance for file downloads, etc. and (b) is there something that we have to do in order to accomplish this if our readings are correct?
Background:
What we've done so far is as follows:
Validate that the connection is indeed GB, full duplex.
root@conn1 # dladm show-dev
ipge0 link: unknown speed: 1000 Mbps duplex: full
ipge1 link: unknown speed: 0 Mbps duplex: unknown
ipge2 link: unknown speed: 0 Mbps duplex: unknown
ipge3 link: unknown speed: 0 Mbps duplex: unknown
root@conn1 #
We've run a crossover cable between 2 of them to eliminate any "switch" issues from the equation.
We then ran iperf, as a server on one of them, as a client on the other.
Server Output:
root@conn2 # iperf -s
Server listening on TCP port 5001
TCP window size: 48.0 KByte (default)
[ 4] local 192.168.1.215 port 5001 connected with 192.168.1.71 port 32795
[ ID] Interval Transfer Bandwidth
[ 4] 0.0-10.0 sec 598 MBytes 502 Mbits/sec
Client output:
root@conn1 # iperf -c 192.168.1.215 -i 1
Client connecting to 192.168.1.215, TCP port 5001
TCP window size: 48.0 KByte (default)
[ 3] local 192.168.1.71 port 32795 connected with 192.168.1.215 port 5001
[ ID] Interval Transfer Bandwidth
[ 3] 0.0- 1.0 sec 57.8 MBytes 485 Mbits/sec
[ 3] 1.0- 2.0 sec 59.9 MBytes 502 Mbits/sec
[ 3] 2.0- 3.0 sec 60.1 MBytes 504 Mbits/sec
[ 3] 3.0- 4.0 sec 59.7 MBytes 501 Mbits/sec
[ 3] 4.0- 5.0 sec 59.9 MBytes 502 Mbits/sec
[ 3] 5.0- 6.0 sec 60.7 MBytes 509 Mbits/sec
[ 3] 6.0- 7.0 sec 60.2 MBytes 505 Mbits/sec
[ 3] 7.0- 8.0 sec 59.9 MBytes 503 Mbits/sec
[ 3] 8.0- 9.0 sec 59.9 MBytes 503 Mbits/sec
[ 3] 9.0-10.0 sec 59.5 MBytes 499 Mbits/sec
[ 3] 0.0-10.0 sec 598 MBytes 501 Mbits/sec
root@conn1 #
Thoughts? Help!?
...jeff

Hi,
We are having issues with our T2000s as well. Same setup. t2000s back to back with a crossover connection. Best we are getting with a single iperf test is..
# iperf -c 192.168.1.2 -i 1
Client connecting to 192.168.1.2, TCP port 5001
TCP window size: 2.00 MByte (default)
[ 3] local 192.168.1.1 port 52643 connected with 192.168.1.2 port 5001
[ ID] Interval Transfer Bandwidth
[ 3] 0.0- 1.0 sec 27.7 MBytes 232 Mbits/sec
[ 3] 1.0- 2.0 sec 28.8 MBytes 242 Mbits/sec
[ 3] 2.0- 3.0 sec 30.3 MBytes 254 Mbits/sec
[ 3] 3.0- 4.0 sec 26.5 MBytes 222 Mbits/sec
[ 3] 4.0- 5.0 sec 24.3 MBytes 204 Mbits/sec
[ 3] 5.0- 6.0 sec 28.9 MBytes 242 Mbits/sec
[ 3] 6.0- 7.0 sec 28.7 MBytes 241 Mbits/sec
[ 3] 7.0- 8.0 sec 30.6 MBytes 257 Mbits/sec
[ 3] 8.0- 9.0 sec 30.8 MBytes 259 Mbits/sec
[ 3] 9.0-10.0 sec 26.8 MBytes 225 Mbits/sec
[ 3] 0.0-10.0 sec 283 MBytes 237 Mbits/sec
[ 4] local 192.168.1.2 port 5001 connected with 192.168.1.1 port 52643
[ ID] Interval Transfer Bandwidth
[ 4] 0.0-10.0 sec 283 MBytes 238 Mbits/sec
Did you ever get an answer to your questions below? Would you be willing to share what you found?
What settings do you have to get the 500 Mbits/sec? Our servers are fairly well loaded so we think it's just fighting for CPU with everything else. If you run many streams your performance improves a great deal. We've gotten ~800Mbits/sec running 5 or more iperf runs at the same time.
If you run "intrstat" while you do the single or many iperf runs what does your CPU peg out at? We get about %11 cpu useage from a single iperf run and %35 from 2 CPUs when we do many iperf runs at the same time.
Thanks,
-Matt

Windows crashes with Blue Screen

i'm working with windows XP and after installing the BB Desktop software, i get quite often a blue screen.... Can anybody help me with this? Is a special Service pack necessary to run it properly? Thanks in advance for any help.
J-P

Which version of desktop manager you're trying to install?
tanzim
If your query is resolved then please click on “Accept as Solution”
Click on the LIKE on the bottom right if the post deserves credit

Laggy window performance with external monitor and USB hub after 8.1 -- possible cause found

I have the Yoga 11s which I've been using in conjunction with a Plugable UD-3900 for a few weeks now. Everything has worked very well, especially with external display, keyboard, mouse, and ethernet plugged into the hub.
After upgrading to 8.1 the other day, I began getting very noticeable window and mouse lag on the external monitor. Dragging windows would jump around, aero peek renders were slow, and the 'ribbon' screen saver would pixelate and was slow to wake up.
I installed the updated DisplayLink drivers, and also all the updated Lenovo drivers, but the problem remained. This morning I was trying different ideas and found something very interesting:
The configuration I use when attached to the UD-3900 is to have the keyboard flipped under and the display flipped up in the "stand" so I can use it as a second monitor. Of course when you do that, the Yoga turns off the keyboard & touchpad so they don't get accidentally pressed.
Just for kicks, I decided to flip the keyboard back around and try using the touchpad to move windows around on the extended monitor. Surprise: the laggy window dragging and rendering was gone. And then even more surprising, when going back to the wireless mouse while still in 'laptop' configuration, everything continued to work well -- no lag.
I thought maybe it was an incompatibility with the Logitech wireless USB keyboard/mouse itself, so I disconnected it. However, I also have a bluetooth Microsoft mouse, and it does the exact same thing: With laptop keyboard flipped back & disabled, window drags & aero peek renders lag. As soon as I activate the touchpad, lag is gone, and the BT mouse behaves normally.
So, it seems to be some kind of interaction between the automatic disabling of the Yoga's keyboard/touchpad and any external mouse. Has anyone else seen anything similar? Any ideas on how to solve so I can use the Yoga in the stand configuration?

Just to close the loop on this, I've determined that the cause of my issue is the Intel Dynamic Platform and Thermal Framework software/driver. I've disabled in the BIOS for now, and the machine is working very well. Will look for an update from Lenovo to address more definitively.

Incredibly poor iPod sync performance with music library on NAS

I have recently purchased a 300 GB Buffalko Linkstation NAS with the express intention of storing my 23k MP3s on it and then using iTunes to listen to them from either my main PC or the Media Centre.
This has all worked out just fine.
What has not is the fact that trying to sync my iPod(s) is now unbelievably slow. When the MP3s were on the local hard drive syncing the iPod would entail i) 30 seconds or so of "Updating iPod" with no sign of syncing activity then ii) constantly updated "x of y files" as they are synced and finally c) a few seconds of "Updating iPod" before everything is done.
Now that the MP3s are on the NAS step i) above takes ... 70 minutes. That does not include copying time ... just to "evaluate" what is to be synced. I obviously expected it to be slower than before but this is obviously unusable.
I have done some investigation and in these 70 minutes there is pretty constant 20-40 KB/s traffic going to and from the NAS. In an attempt to find out what this consisted of, I ran filemon from sysinternals (http://www.sysinternals.com/) only to find out that every single file in the iTunes library is accessed during this phase!
Over the 70 minutes the traffic from the NAS is around 180MB and to it is about 120MB, however the problem seems to be with the number of files that need accessing rather than the absolute size.
Some other background that may be useful:
* the MP3s themselves are on the NAS but the library files (.itl and .xml) are on the local hard drive (I moved them back there to rule it out as the problem)
* routine copy or write operations to the NAS are carried out at 2+ MB/s (so it is not a bandwidth limitation)
* I have tried syncing with my 40GB 3G, 4GB Mini and 4GB Nano ... same problem with all 3
Has anyone else come up against this? I have searched some of the obvious NAS posts on this forum and no-one seems to have brought this up. This is surprising as I do not really see how it can be a problem specific to this model of NAS.
Any help greatly received.
Windows XP

Were you ever able to solve this problem? If so,
how? If not, did you see the same slowness copying
the files in Windows Explorer from the NAS to the
iPod?
No I wasn't. To be honest I have essentially given up as even if I can fix it, disk space is cheaper than life is long!
Using the NAS in general is no problem. In fact, once iTunes got beyond the initial working out of what needed to be removed from and copied to the iPod, having all my MP3s on the NAS and copying direct to the iPod was no issue.
Following some sage (and frankly scary!) advice at ilounge (http://forums.ilounge.com/showthread.php?t=163611), I've decided to keep two copies of my MP3s. The fact that my fiendish NAS plan has failed is hurting more than the not-all-that-traumatic reality of duplicating 140GB of files if truth be told!

Poor *First Launch* Performance with AppV 5

I'm having an issue where the first time I launch a rather large AppV 5 application the performance I get is very slow. Subsequent launches, however, are near native. We reboot our Citrix server's daily so this is causing some issues for us.
I have noticed that the applications that launch slower tend to be the larger applications we sequence. Performance is slow regardless whether the package is fully mounted or streamed.
I've detailed it here with some animated gifs showing the performance slowness.
http://trentent.blogspot.ca/2014/11/appv-5-first-launch-application.html
The short of it:
When AppV is "launching" the application for the first time after a net stop/net start it starts consuming memory and CPU for the 196 seconds that it's launching, peaking at nearly 600MB RAM and 50% CPU (though most of the time it's peaked at 25%
CPU).
The AppV Debug logs do not give a whole lot of info as to what AppVClient.exe is doing during this time. Most of the logs show the application "start" as they setup their components, and when the application has launched. Almost all
the logs show the first second or two of application launch and the last second or two before the GUI.
When the application is launched after a reboot complete with add-appvpackage/publish-appvpackage (global) the first launch is ~40s.
Subsequent launches of the application are consistently between 11-15s (near native).
Does anyone have any thoughts about what I can do to make it so the application will launch at (near) native speed for the first launch? I am fresh out of ideas.

Let me share my test results with your provided test package:
Test Case 1
Default Package (without any modifications):
- Add-Package: ~23.5s
- Publish-Package: ~2.0s
- First start registry.exe: Nearly instant, but Registry staging takes 35s with high CPU usage (>=30%)
- Second start registry.exe: Instant
Test Case 2
Removed all ActiveX exts., COM Object exts. and Filetype assosciations in AppxManifest.xml & renamed HKLM\Classes to HKLM\Classes_TEST
(I developed a tool that allows me to modify the .appv package directly including all files in it):
- Add-Package: ~3s
- Publish-Package: ~1.6s
- First start registry.exe: Instant, but registry staging takes 33s with high CPU usage (30%)
- Second start registry.exe: Instant
Test Case 3
Removed all COM object extensions in AppxManifest.xml:
- Add-Package: ~2.6s
- Publish-Package: ~1s
- First start registry.exe: Not completely instant, takes 6s to start and Registry staging takes 35s with high CPU usage (>=30%)
- Second start registry.exe: Instant
These are my findings:
1) The long time needed to add the package is due to the amount of COM object extensions. The size of the manifest file is 71MB, so that's really big. When I remove the COM objects from the manifest, the file size is 209KB.
2) The high CPU usage is caused by registry staging. The registry file is ~58MB. With the first start, registry staging starts, the .dat hive gets loaded and the content will be copied to HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\AppV\Client\Packages\<Package-GUID>\Versions\<Version-GUID>\REGISTRY.
In the same tree as the REGISTRY, you will find a key named "RegistryStagingFinished" when the staging has been finished. I observed that the high CPU load decreases as soon as registry staging has been finished (this is the case when RegistryStagingFinished
is there). So the staging took ~35s on my test System to do the registry staging for a 58MB registry hive.
And now the intersting part. If you close the virtualized app / the app you start in the VE (in your case registry.exe) before registry staging is finished (so before RegistryStagingFinished is set), it will re-start the registry staging from the
beginning the next time you start the app. To me it looks like it doesn't continue from the last point it stopped the registry staging. This might be something that could be improved in a next release so that it continues registy staging from the point it
previously stopped.
What does it mean for you:
If you need all integration points like COM, ActiveX, etc., you won't be able to reduce the add-package time. Otherwise if you remove them from the package, the add-package time can be reduced to <5s.
Your registry is as well quite big (58MB). Loading that into registry needs time. There is no way around, but when deploying the package globally, you could start a process within the VE of your application right after publishing it so that the registry
staging executes once and is already finished when the first user starts the app.
Due to the big registry size and the amount of integration points of your package, I believe there won't be a lot of possibilities to improve the experienced performance issues except reducing the size and amount of integration points.
Regards, Michael - http://blog.notmyfault.ch -

Poor/slow window load with 8mb of ram and A7 chip ***

A new Macbook pro with all the trimmings and its slower then my old dilapatated h/p ***.

i just wonder why this so. i check my networking and cpu usage and it seems fine but then while on line my windows either wont completely load or some other silly glitch and its odd for suck a new and equipped laptop. am i missing something or should i take it in to have some one give it a once over.

Windows crashed with Blue Screen. Dump file content attached.

Loading Dump File [C:\Windows\Minidump\121712-35786-01.dmp] Mini Kernel Dump File: Only registers and stack trace are available
Symbol search path is: SRV*c:\debug_symbols*http://msdl.microsoft.com/download/symbols Executable search path is: Windows 7 Kernel Version 7601 (Service Pack 1) MP (4 procs) Free x64 Product: WinNt, suite: TerminalServer SingleUserTS Built by: 7601.17944.amd64fre.win7sp1_gdr.120830-0333 Machine Name: Kernel base = 0xfffff800`03407000 PsLoadedModuleList = 0xfffff800`0364b670 Debug session time: Mon Dec 17 11:57:26.477 2012 (UTC - 4:00) System Uptime: 4 days 17:23:45.304 Loading Kernel Symbols ............................................................... ................................................................ ................................................................ ........ Loading User Symbols Loading unloaded module list .................................................. ******************************************************************************* *                                                                             * *                        Bugcheck Analysis                                    * *                                                                             * *******************************************************************************
Use !analyze -v to get detailed debugging information.
BugCheck A, {10, 2, 0, fffff8000341f852}
Unable to load image \SystemRoot\System32\drivers\lcencvm.sys, Win32 error 0n2 *** WARNING: Unable to verify timestamp for lcencvm.sys *** ERROR: Module load completed but symbols could not be loaded for lcencvm.sys Unable to load image \SystemRoot\System32\Drivers\lcfiltvm.sys, Win32 error 0n2 *** WARNING: Unable to verify timestamp for lcfiltvm.sys *** ERROR: Module load completed but symbols could not be loaded for lcfiltvm.sys Probably caused by : lcencvm.sys ( lcencvm+26b9a )
Followup: MachineOwner ---------
2: kd> !analyze -v ******************************************************************************* *                                                                             * *                        Bugcheck Analysis                                    * *                                                                             * *******************************************************************************
IRQL_NOT_LESS_OR_EQUAL (a) An attempt was made to access a pageable (or completely invalid) address at an interrupt request level (IRQL) that is too high. This is usually caused by drivers using improper addresses. If a kernel debugger is available get the stack backtrace. Arguments: Arg1: 0000000000000010, memory referenced Arg2: 0000000000000002, IRQL Arg3: 0000000000000000, bitfield : bit 0 : value 0 = read operation, 1 = write operation bit 3 : value 0 = not an execute operation, 1 = execute operation (only on chips which support this level of status) Arg4: fffff8000341f852, address which referenced memory
Debugging Details: ------------------
READ_ADDRESS: GetPointerFromAddress: unable to read from fffff800036b5100 0000000000000010
CURRENT_IRQL: 2
FAULTING_IP: nt!IopInsertRemoveDevice+62 fffff800`0341f852 48393a          cmp     qword ptr [rdx],rdi
CUSTOMER_CRASH_COUNT: 1
DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
BUGCHECK_STR: 0xA
PROCESS_NAME: Rim.Desktop.ex
TRAP_FRAME: fffff8800c8a52f0 -- (.trap 0xfffff8800c8a52f0) NOTE: The trap frame does not contain all registers. Some register values may be zeroed or incorrect. rax=0000000000000000 rbx=0000000000000000 rcx=00000000000000a0 rdx=0000000000000010 rsi=0000000000000000 rdi=0000000000000000 rip=fffff8000341f852 rsp=fffff8800c8a5480 rbp=0000000000000000 r8=fffff88003365890 r9=0000000000000000 r10=0000000000000000 r11=fffffa800ec2a900 r12=0000000000000000 r13=0000000000000000 r14=0000000000000000 r15=0000000000000000 iopl=0         nv up ei pl nz na pe nc nt!IopInsertRemoveDevice+0x62: fffff800`0341f852 48393a          cmp     qword ptr [rdx],rdi ds:00000000`00000010=???????????????? Resetting default scope
LAST_CONTROL_TRANSFER: from fffff80003485569 to fffff80003485fc0
STACK_TEXT: fffff880`0c8a51a8 fffff800`03485569 : 00000000`0000000a 00000000`00000010 00000000`00000002 00000000`00000000 : nt!KeBugCheckEx fffff880`0c8a51b0 fffff800`034841e0 : fffffa80`0e0cdbf0 fffff880`01202bcf fffff880`0c8a5300 fffffa80`0a272300 : nt!KiBugCheckDispatch+0x69 fffff880`0c8a52f0 fffff800`0341f852 : 00000000`00000000 fffffa80`0a272300 00000000`00000000 fffffa80`07d6e8d0 : nt!KiPageFault+0x260 fffff880`0c8a5480 fffff800`0341f729 : fffffa80`0a272350 fffffa80`07d6e8d0 fffffa80`07d6e8d0 00000000`0000000a : nt!IopInsertRemoveDevice+0x62 fffff880`0c8a54b0 fffff800`0377dfb7 : fffffa80`0f871a30 fffffa80`0a5aa070 00000000`00000001 fffffa80`07321210 : nt!IopCompleteUnloadOrDelete+0x9d fffff880`0c8a5560 fffff800`0348f1d4 : fffff880`0c8a5660 fffffa80`0a447ab8 fffffa80`07321210 fffff880`0c8a5668 : nt!IopDeleteFile+0x1a7 fffff880`0c8a55f0 fffff880`0146db9a : fffffa80`0a447ab8 fffffa80`0a491c28 fffffa80`0a54e628 fffff880`0144ac90 : nt!ObfDereferenceObject+0xd4 fffff880`0c8a5650 fffffa80`0a447ab8 : fffffa80`0a491c28 fffffa80`0a54e628 fffff880`0144ac90 00000000`000003e3 : lcencvm+0x26b9a fffff880`0c8a5658 fffffa80`0a491c28 : fffffa80`0a54e628 fffff880`0144ac90 00000000`000003e3 fffff880`00ff86d0 : 0xfffffa80`0a447ab8 fffff880`0c8a5660 fffffa80`0a54e628 : fffff880`0144ac90 00000000`000003e3 fffff880`00ff86d0 fffff8a0`14ddc760 : 0xfffffa80`0a491c28 fffff880`0c8a5668 fffff880`0144ac90 : 00000000`000003e3 fffff880`00ff86d0 fffff8a0`14ddc760 fffff880`00ff58d8 : 0xfffffa80`0a54e628 fffff880`0c8a5670 00000000`000003e3 : fffff880`00ff86d0 fffff8a0`14ddc760 fffff880`00ff58d8 fffff880`00ff86d0 : lcencvm+0x3c90 fffff880`0c8a5678 fffff880`00ff86d0 : fffff8a0`14ddc760 fffff880`00ff58d8 fffff880`00ff86d0 00000000`00000000 : 0x3e3 fffff880`0c8a5680 fffff8a0`14ddc760 : fffff880`00ff58d8 fffff880`00ff86d0 00000000`00000000 fffff880`0c8a5840 : lcfiltvm+0xf6d0 fffff880`0c8a5688 fffff880`00ff58d8 : fffff880`00ff86d0 00000000`00000000 fffff880`0c8a5840 fffff880`012016df : 0xfffff8a0`14ddc760 fffff880`0c8a5690 fffff880`00ff86d0 : 00000000`00000000 fffff880`0c8a5840 fffff880`012016df fffffa80`0b5236f0 : lcfiltvm+0xc8d8 fffff880`0c8a5698 00000000`00000000 : fffff880`0c8a5840 fffff880`012016df fffffa80`0b5236f0 00000000`00000000 : lcfiltvm+0xf6d0
STACK_COMMAND: kb
FOLLOWUP_IP: lcencvm+26b9a fffff880`0146db9a ??              ???
SYMBOL_STACK_INDEX: 7
SYMBOL_NAME: lcencvm+26b9a
FOLLOWUP_NAME: MachineOwner
MODULE_NAME: lcencvm
IMAGE_NAME: lcencvm.sys
DEBUG_FLR_IMAGE_TIMESTAMP: 4e3c8eac
FAILURE_BUCKET_ID: X64_0xA_lcencvm+26b9a
BUCKET_ID: X64_0xA_lcencvm+26b9a
Followup: MachineOwner ---------
2: kd> !analyze -v ******************************************************************************* *                                                                             * *                        Bugcheck Analysis                                    * *                                                                             * *******************************************************************************
IRQL_NOT_LESS_OR_EQUAL (a) An attempt was made to access a pageable (or completely invalid) address at an interrupt request level (IRQL) that is too high. This is usually caused by drivers using improper addresses. If a kernel debugger is available get the stack backtrace. Arguments: Arg1: 0000000000000010, memory referenced Arg2: 0000000000000002, IRQL Arg3: 0000000000000000, bitfield : bit 0 : value 0 = read operation, 1 = write operation bit 3 : value 0 = not an execute operation, 1 = execute operation (only on chips which support this level of status) Arg4: fffff8000341f852, address which referenced memory
Debugging Details: ------------------
READ_ADDRESS: 0000000000000010
CURRENT_IRQL: 2
FAULTING_IP: nt!IopInsertRemoveDevice+62 fffff800`0341f852 48393a          cmp     qword ptr [rdx],rdi
CUSTOMER_CRASH_COUNT: 1
DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
BUGCHECK_STR: 0xA
PROCESS_NAME: Rim.Desktop.ex
TRAP_FRAME: fffff8800c8a52f0 -- (.trap 0xfffff8800c8a52f0) NOTE: The trap frame does not contain all registers. Some register values may be zeroed or incorrect. rax=0000000000000000 rbx=0000000000000000 rcx=00000000000000a0 rdx=0000000000000010 rsi=0000000000000000 rdi=0000000000000000 rip=fffff8000341f852 rsp=fffff8800c8a5480 rbp=0000000000000000 r8=fffff88003365890 r9=0000000000000000 r10=0000000000000000 r11=fffffa800ec2a900 r12=0000000000000000 r13=0000000000000000 r14=0000000000000000 r15=0000000000000000 iopl=0         nv up ei pl nz na pe nc nt!IopInsertRemoveDevice+0x62: fffff800`0341f852 48393a          cmp     qword ptr [rdx],rdi ds:00000000`00000010=???????????????? Resetting default scope
LAST_CONTROL_TRANSFER: from fffff80003485569 to fffff80003485fc0
STACK_TEXT: fffff880`0c8a51a8 fffff800`03485569 : 00000000`0000000a 00000000`00000010 00000000`00000002 00000000`00000000 : nt!KeBugCheckEx fffff880`0c8a51b0 fffff800`034841e0 : fffffa80`0e0cdbf0 fffff880`01202bcf fffff880`0c8a5300 fffffa80`0a272300 : nt!KiBugCheckDispatch+0x69 fffff880`0c8a52f0 fffff800`0341f852 : 00000000`00000000 fffffa80`0a272300 00000000`00000000 fffffa80`07d6e8d0 : nt!KiPageFault+0x260 fffff880`0c8a5480 fffff800`0341f729 : fffffa80`0a272350 fffffa80`07d6e8d0 fffffa80`07d6e8d0 00000000`0000000a : nt!IopInsertRemoveDevice+0x62 fffff880`0c8a54b0 fffff800`0377dfb7 : fffffa80`0f871a30 fffffa80`0a5aa070 00000000`00000001 fffffa80`07321210 : nt!IopCompleteUnloadOrDelete+0x9d fffff880`0c8a5560 fffff800`0348f1d4 : fffff880`0c8a5660 fffffa80`0a447ab8 fffffa80`07321210 fffff880`0c8a5668 : nt!IopDeleteFile+0x1a7 fffff880`0c8a55f0 fffff880`0146db9a : fffffa80`0a447ab8 fffffa80`0a491c28 fffffa80`0a54e628 fffff880`0144ac90 : nt!ObfDereferenceObject+0xd4 fffff880`0c8a5650 fffffa80`0a447ab8 : fffffa80`0a491c28 fffffa80`0a54e628 fffff880`0144ac90 00000000`000003e3 : lcencvm+0x26b9a fffff880`0c8a5658 fffffa80`0a491c28 : fffffa80`0a54e628 fffff880`0144ac90 00000000`000003e3 fffff880`00ff86d0 : 0xfffffa80`0a447ab8 fffff880`0c8a5660 fffffa80`0a54e628 : fffff880`0144ac90 00000000`000003e3 fffff880`00ff86d0 fffff8a0`14ddc760 : 0xfffffa80`0a491c28 fffff880`0c8a5668 fffff880`0144ac90 : 00000000`000003e3 fffff880`00ff86d0 fffff8a0`14ddc760 fffff880`00ff58d8 : 0xfffffa80`0a54e628 fffff880`0c8a5670 00000000`000003e3 : fffff880`00ff86d0 fffff8a0`14ddc760 fffff880`00ff58d8 fffff880`00ff86d0 : lcencvm+0x3c90 fffff880`0c8a5678 fffff880`00ff86d0 : fffff8a0`14ddc760 fffff880`00ff58d8 fffff880`00ff86d0 00000000`00000000 : 0x3e3 fffff880`0c8a5680 fffff8a0`14ddc760 : fffff880`00ff58d8 fffff880`00ff86d0 00000000`00000000 fffff880`0c8a5840 : lcfiltvm+0xf6d0 fffff880`0c8a5688 fffff880`00ff58d8 : fffff880`00ff86d0 00000000`00000000 fffff880`0c8a5840 fffff880`012016df : 0xfffff8a0`14ddc760 fffff880`0c8a5690 fffff880`00ff86d0 : 00000000`00000000 fffff880`0c8a5840 fffff880`012016df fffffa80`0b5236f0 : lcfiltvm+0xc8d8 fffff880`0c8a5698 00000000`00000000 : fffff880`0c8a5840 fffff880`012016df fffffa80`0b5236f0 00000000`00000000 : lcfiltvm+0xf6d0
STACK_COMMAND: kb
FOLLOWUP_IP: lcencvm+26b9a fffff880`0146db9a ??              ???
SYMBOL_STACK_INDEX: 7
SYMBOL_NAME: lcencvm+26b9a
FOLLOWUP_NAME: MachineOwner
MODULE_NAME: lcencvm
IMAGE_NAME: lcencvm.sys
DEBUG_FLR_IMAGE_TIMESTAMP: 4e3c8eac
FAILURE_BUCKET_ID: X64_0xA_lcencvm+26b9a
BUCKET_ID: X64_0xA_lcencvm+26b9a
Followup: MachineOwner ---------

The best working solution at this time is to download and install Skype 6.14 and disable updates. If you still get prompts to upgrade you can ignore them and the program should continue to function as it has not been retired as of yet. Hopefully there will be a resolution in a future Skype update or an updated driver from HP that might resolve the issue.
http://community.skype.com/t5/Windows-desktop-client/BSOD-on-startup-and-installation/m-p/3511645/hi...

Window 7 on Bootcamp crush with Blue Screen..

Dear All,
I am facing with crushing on Window 7 with blue screen for quite frequently. When i using the Mac OS X Lion, It is quite stable but happened Kernel Panic or Automatic Restarting. But it only happens rarely..
Bluescreen Details:
Appears like Memory Dump Error. And also mention to remove the newly installed hardware or software. And also mention about Virtualization.
Scenario:
I have installed Oracle Virtual Box on the Bootcamp Window 7 and run the virtual machine. After that start happening this errors and i have remove all the virtual machines and Oracle Virtual Box.
Taken Action:
Remove the Bootcamp Partitions and reinstall the Window 7 but after installed, it come out blue screen once again.
What i think is because of Virtualization on BIOS but i am not sure how to turn it off on Mac.
Please give me suggestions on how to repair this and thanks in advance for your advices.
Best Regards,
Great Mahar.

I only suggested this scenario based on personal experience. I have faced 2 BSODs, while using Chrome in an XP box that I have at home. Also one of my college friends has experienced the same issue while using chrome on Windows 7. However, these have not occurred in a while since upgrading to the latest version of chrome. Honestly I don't know what could be your case but it should be a good idea to run the Apple Hardware Test to check the ram modules for errors as hatter suggested.

Poor performance for full screen desktop

Hi,
Full screen desktop ( displayed as Kiosk ) of Linux with gnome ( I believe it's the same for all window managers ) is poor ( even with command as ls you see the delays ).
It happens on the local network. Connection to the application server is SSH.
SGD server - Solaris 10 , Sun Fire 280. Application server is regular modern PC.
Regular windows performance is very good.
Any suggestions ?
Thanks

I think you will find the poor performance is only with GTK applications.
For example, if you go into a large directory of files, and do an ls -aRl, you will notice it is a lot slower with a gnome-terminal than it is with a plain xterm.
I think 4.3 will resolve this performance issue.

JSF with Infragistics Dialog window problem

Hi All,
First of all i would like to thank you all for your previous valuable suggestions. Currently i am working on JSF 1.1 application with Infragistics components. We implemented 'City Search' functionality where a command Link will be displayed once the user clicks on that link a small dialog window to perform city search will be opened. Now my question is once we access the link 'City Search', the command button 'Add' to submit the form is not working properly. I need to click the command Button twice to submit my request.
If i didn't access 'City search' command Link, then action is submitted as soon as when i click on 'Add' command button once.
Actual jsp file is 'add_client.jsp'.
included jsp file which contains 'City Search' link is 'zipcode_search.jsp'.
Any help will be highly appreciated.
Thanks & Regards
Vijay

Hi,
Please explain how did you solve your problem. I am facing the same problem.
Regards,
Kaustubh.

I work on two screens. With the new updates, my computer will not automatically open a new window on the second screen.

I work on two screens. With the new updates we cannot automatically open a new window on the second screen, but have to move them over manually. Not a huge problem, but because of the nature of the work, it gets tedious.

Hi Annowriter,
Thank you for your question, I understand that it is annoying to have to move a new window to the second screen. Since it opens in the active screen this may have been a stored preference, however it is not the default.
There is an add on called [https://addons.mozilla.org/en-US/firefox/addon/monitor-master/ Monitor Master] that customizes settings like this. Check it out.

CS4 poor dialog window performance with huge screen dual 30 inch

Similar Messages

Maybe you are looking for