CS4 Premier does not "Export"

Hi,
Something happened to my Premier CS4 and I am confused, hoping you can help please.
When I make a timeline, and click on "export", the Media Encoder does not come up.  Premier seems to go into a modal mode, where nothing can be accessed, except unless I click on ESCAPE first.
I am not sure what could be causing this.
Can you please tell me how this can be fixed?
Thank you,
Mike

'01 Chassagne-Montrachet Vergers, 1er Cru Michel Colin-Deleger
or
'05 Chassagne-Montrachet A.C. Bouchard Pere et Fils
I'd probably go with the Domaine Colin-Deléger, especially as Les Vergers is one of my favorite vineyards. Michel Colin is a master of white Burgs in my book. The ‘01 is a fantastic wine and is drinking well now. I’d guess that it’d still have another good ten years, depending on what one wants in a white Burg. In general terms, the ‘01 vintage is rated slightly below the ‘05, but that does vary by exact properties.
OTOH, we did a tasting with Henri Bouchard about 4 mos. ago. Besides some of his family’s red Burgs, and a Chablis venture wine with Favere, we had the ‘05 - ‘07 Puligny-Montrachets and the same years of their Chassagne-Montrachet. There was no Bâtard-Montrachet poured. I bought my allocation of the ‘07 of each and expect shipment soon. The 2001 vintage was nearly excellent for most properties, so that is a very worthwhile wine. I’d have to check my notes, but think that we had the Chassagne-Montrachet, and I’m almost sure it was the ‘05, in New Orleans two weeks back. Again, I would carafe this wine to open it up a bit.
As a négociant, the wines from Bouchard Père et Fils can be a tad less even, than something from Colin. Still, they are great producers, and are also buying more property, from which they will be producing more of their wines, from the dirt to the bottle. More and more "estate wines."
I’d guess that the Bouchard would likely be less expensive, so the final choice might boil down to it, should $ be an object. If one wanted it to drink as if it had more years on it, more time in the carafe and the glass would give one the impression that it was older, than it is.
In short, either would be an excellent wine. I’ll share my cellar with you, if you share your cellar with me!
Hunt

Similar Messages

  • I just purchased Export PDF to Excel and it does not export anything usable. Your terminology should not be "export" but paste image, which is of no value. Please cancel my account and refund my money. What a shame you would advertise this as a product.

    I just purchased Export PDF to Excel and it does not export anything usable. Your terminology should not be "export" but paste image, which is of no value. Please cancel my account and refund my money. What a shame you would advertise this as a product.

    Hi pgrillo,
    I'm sorry that you're disappointed with your ExportPDF subscription. I checked your account, and see that the order is still processing. As such, I'm unable to cancel it for you myself. However, a Customer Care agent can take care of your cancelation/refund quickly. Here is the contact information: Contact Customer Care. Click Still Need Help? Contact Us at the bottom of the page to find both phone and chat support options.
    Best,
    Sara

  • Devanagari font in layed out in Indesign (using IndicPlus) does not export correctly to a PDF.

    Namaste InDesign gurus,
          I have a problem at hand. Wondering if anyone has encoutered similar problem before? Any help is greatly appreciated. And if you're in San Francisco bay area - I can buy you a lunch :-)
    Short description: Devanagari font in layed out in Indesign (using IndicPlus) does not export correctly to a PDF. All the ligatures are assembled and displayed in the PDF.
    Adobe Indesign Version: InDesign CS5 Design Premium - regular U.S. version (not ME).
    Steps I took:
              I purchased CS5 Design Premium and also purchased the IndicPlus plugin to author sanskrit documents in InDesign. I create Sanskrit text using either of the following methods.
    1) Itranslator
    2) Paste the devanagari from the Itranslator directly into InDesign or paste it first into MSWord and then copy from MSWord and paste it to Indesign.
    It doesn't matter how I paste it. After I apply the IndicPlus character/paragraph style so that the sanskrit looks good in InDesign, when I try to export it to a PDF. The PDF does not display the ligatures currectly. It just lists all the characters in order without assembling.
    I've spent a lot of money buying CS5, IndicPlus and then I can't even create a simple PDF document from InDesign. It is very frustrating.
    Has anyone been able to successfully export a sanscrit document from InDesign PDF ?
    (Please let me know if my problem description needs more fleshing out).
    I could create the PDF from MSWord directly but I'm trying to use indesign to layout my book. If InDesign cannot export to PDF I'll just have to use MSWord for my book layout. I've spend probably scores of hours trying to learn InDeisn and formatting my book content - seems like it is all going to be waste.
    Is MSWord the best choice or only choice for laying out books that have sanskrit text in them?
    -Ravi

    Has anyone been able to successfully export a sanscrit document from InDesign PDF ?
    Not Sanskrit, no, but plenty of Hindi, Nepali, Marathi, and other languages written in Devanagari script - so it should be possible. I don't even use IndicPlus, which by most accounts makes working with Indic text much easier.
    1) Itranslator
    I've never seen this, but a quick Google led me to the homepage of ITranslator for Windows, where I saw this:
    Itranslator 99 (Build 1.3.0.86)  & New Beta Version
    uses 8-bit true type fonts and is compatible
    with Windows 95/98/ME/NT/2000/XP.
    For more information, click here.
    Itranslator 2003 (Build 2.0.0.38) & New Beta Version
    uses 16-bit Unicode-compatible fonts and is working
    only on Windows 2000 / XP / Server 2003.
    For more information, click here.
    So, if you're using ITranslator 99, there's the problem - those "8-bit true type fonts" won't work in InDesign. Can you post a sample of the text you're trying to paste into InDesign? Name the font(s) you are using, both in Word and in Indesign, and if possible make a small sample of the text available for us to test. It's also possible that InDesign is using a substituted font, which could cause this problem. So, if the font name in InDesign has brackets around it, you know that InDesign doesn't actually have that font installed and is auto-substituting. Also, if you go to View -> Screen Mode -> Normal and the text is highlighted pink, you know that the font has dropped. (Unless the highlighting for dropped fonts was turned off - check in Edit -> Preferences -> Composition and make sure that "Substituted Fonts" is checked.
    Also, for what it's worth, is there any way you could Place your text instead of copying and pasting? This may be cause of your problem - but even though it probably isn't, it's still worth a try.
    Lastly - no, I've found InDesign to be superior for typesetting for almost all languages, but the learning curve is pretty steep, and many of the problems faced by people working in non-English languages are not easy to research when you have a problem.

  • Acrobat/Indesign does not export correct into the selected output intention (eci_iso_coated_v2_300)

    I use the CS6 suite with Acrobat XI at windows platform.
    When I want to save a file from InDesign as .pdf with output intention eci_iso_coated_v2_300 the result is a .pdf with more than 300% ink coverage.
    I tried to transform the result in Acrobat XI into this standard output intention, but also the result has more than 300 % ink coverage.
    What is the reason of this bug?
    Before with Acrobat X this worked without problems

    Hi Rob,
    I was told the new way to work would be to draw files via Bridge direct into the InDesign file
    and I thought automatically the color would not be changed.
    my colourmanagement setting in bridge for the whole CS6 was  ECI isocoated_V2_300
    The Illustrator file was saved without color profile.
    In this test file I used 3 kinds of black: background of pirate in cmyk 79,34 / 72,78 / 59,38 / 79,88 = ink coverage 291 %
    DÜSSELPIRATEN in “black” (if you would convert this in the file with the cmyk button it would be the same ink-percentage as before
    “e.V.” was set to 100 % k
    I set the preferences for Acrobat from InDesign CS6 as pdf X4 with profile eci isocoatedV2_300 in three ways:
    no color conversion
    convert to profile
    convert to profile keeping existing values
    in all tree files the pirates background has 322 % ink coverage instead of 291 %
    Why does Acrobat convert “black” in the wrong way?  If I click in Illustrator on the 4c button to convert the “black” into 4c it is 291% ink
    Acrobat should come to the same result with all profiles: iso coated V2 and iso coated V2_300
    The same happens also by saving as .pdf X3 or .X1
    The minimum what I expect is, that Acrobat reduces ink coverage for black to 300 %
    I also made test with the new ECI profiles for laminated prints from 2012.
    And with newspaper profiles
    In this case the ink coverage comes below 300 %, but only when I choose convert to profile.
    And then the 100 % k converts to cmyk, what I don’t want to have with text.
    Is there no way to reduce ink coverage below a special percentage without changing Text 100% k
    And is there a bug in Acrobat XI with the ECI IsoCoated_V2_300 Profile? For there is no color reduction below 300 % in all conversion settings.
    I can’t test this with Acrobat X or IX, for my computers with this software don’t run with CS6 64 bit.
    enclosed you find my files
    Kind regards
    Lutz Hanbueckers
    Hanbueckers Werbung GmbH
    Brandsackerstr. 5
    40764 Langenfeld
    P.O. Box 40 02 01
    40242 Düsseldorf
    Tel. +49 02173 1 09 44 - 0
    Fax +49 02173 1 09 44 - 10
    [email protected] <mailto:[email protected]>
    www.hanbueckers.de
    Visit our site
    Steady attractive offers!!!
    HR Düsseldorf B 26 480
    owner Manager: Lutz Hanbueckers
    Von: Rob Day [email protected]
    Gesendet: Samstag, 2. März 2013 04:26
    An: Hanbueckers Werbung
    Betreff: acrobat/Indesign does not export correct into the selected output intention (eci_iso_coated_v2_300)
    Re: acrobat/Indesign does not export correct into the selected output intention (eci_iso_coated_v2_300)
    created by Rob Day <http://forums.adobe.com/people/rob+day> in InDesign - View the full discussion <http://forums.adobe.com/message/5115613#5115613

  • My current Camera Raw 5.7 for Photoshop CS4 Extended does not support Canon EOS 6D. What can I do? Will there be a Photoshop Camera RAW for that?

    My current Camera Raw 5.7 for Photoshop CS4 Extended does not support Canon EOS 6D. What can I do? Will there be a Photoshop Camera RAW for that?

    You would need Camera Raw 7.3 or later to open those files. Adobe is not going to update CS4. You can either get a newer version of Photoshop that comes with a current version of Camera Raw, or you can use the DNG converter to save your files down to the ACR version that works with CS4.

  • ITunes v8.1 does not export music library in plain text w/proper CR/LFs?

    Just an FYI...I can recreate this every time. Has anyone else tried and seen the same issue with the new v8.1? I never had this issue with the previous iTunes release. Thanks!
    The new iTunes v8.1 released yesterday does not export the music library in plain text with proper CR/LFs.
    To recreate this bug:
    Select Music from your library
    Go to File -> Library -> Export Playlist...
    Save as a Music.txt and view the output file.
    You will see a continuous single line that contains correct tab separations. However, the correct end of the subject headers in addition to each song (which should be it's own line) is missing proper CR/LFs to format the file correctly.

    Seeing it with 8.1 under 10.4.11 too.
    I was really hoping that 8.1 was going to fix the problem with text export mangling accented characters, not to keep that bug and add a major new one on top of it!

  • Audio Does not export with ideo in quicktime conversion

    I know i did something with a keyboard shortcut during the editing process, but i cant figure out what i did and how to change it back. What my issue is that when i try to export it to any format in quicktime (in quicktime conversion) the video is ok, but my audio does not export at all.
    I dont know what went wrong but i should note i pressed something on my timeline that i didnt realize what it did. Its hard to explain what it looks like, when you press on different clips all the clips on my time line quickly turn a more silver/light color and then change back to the normal color(not effecting the video quality just the thumbnails). But it is has a weird color
    is there a way i can reset all settings without adjusting my video clips?
    Sound settings
    Format: Lubear OCM
    Channels: Stereo (L R)
    Rate: 48.0000 hHz
    Render Settings:
    Quality: Normal
    Linear PCM Settings:
    Sample Size: 16 bits
    Checked: Little Endian

    Hi(Bonjour)!
    Does the audio play when you run sequence?
    Did you toggle off the monitor icon at the left side of timeline for audio track?
    When export to quicktime conversion, select quicktime movie and click OPTION.
    From this point, you should see a checkbox for SOUND. Be sure to check it ON.
    Michel Boissonneault

  • Exporting does not export the music tracks.

    hello- i am needing help exporting my movies from Adobe Premiere Pro 2014. When i try to export a movie, it does not export the music tracks. the audio is fine, but it is not exporting the music beds. any ideas as to why would be VERY helpful! thank you!
    ==============================================
    Edited by moderator to trim the title down to the essential.

    More information needed for someone to help... please click below and provide the requested information
    -Premiere Pro Video Editing Information FAQ http://forums.adobe.com/message/4200840

  • After the 10.9.3 update my Adobe Premiere does not export properly.

    After the 10.9.3 update my Adobe Premiere does not export properly. Someone HELP!
    Can anyone help?
    Thanks!
    <Edited by Host>

    Having the same problem yesterday I spent 2 hours
    Contacting tech support Apple and Adobe.
    Apple says clearly that it is Adobe responsibility
    and Adobe tells to contact Apple...
    And none of the companies are telling when and if there will be a fix.
    I'm ready to go back to PC where hardware companies
    are not trying to boycot software companies. That's my opinion.
    I already lost one job because of this.

  • Adobe story does not export lines of dialogue that are amrked with (CONT'D) into a csv file.

    For some reason Adobe story does not export lines of dialogue that are marked with (CONT’D) into a csv file. The rest of the dialogue exports fine, bit the bits that are marked with (CONT’D) do not show up in the dialogue column !. Can this be changed with some settings or is this a bug? The script was imported from an FDX file. If anyone has a fix for this, please, let me know.
    Thenk you.

    Thanks for reporting this issue.
    This is indeed a bug.
    Just to get correct data in csv, a workaround for this issue could be to replace word 'CONT'D' with a place-holder word, perform an export-to-csv and then change it back.
    1. Press Ctrl+F in script to open Find/Replace
    2. Replace word 'CONT'D' with a placeholder word, say 'TEMPCONTD'
    3. Export the script to csv
    4. Now replace the placeholder word with 'CONT'D'

  • Flash CS4 onPeerConnect does not fire

    Hi
    I tryed to do Flex example for simple chat (p2p) with Stratus at Flash CS4 IDE
    (adapted it of course) but onPeerConnect does not fire.
    Can you take a look at my code ?
    What's wrong with it ?
    package {
        import flash.events.*;
        import flash.net.*;
        import flash.display.*;
        import flash.media.*;
        public class stratusTest2 extends Sprite {
            private const SERVER_ADDRESS:String="rtmfp://stratus.adobe.com/";
            private const DEVELOPER_KEY:String="a9fb14e5b040800e8327ab51-37f33907d0c1/";
            private var nc:NetConnection;
            private var myPeerID:String;
            private var farPeerID:String;
            // streams
            private var sendStream:NetStream;
            private var recvStream:NetStream;
            private var VideoDisplay:MyVideoDisplay;
            private var FAR_PeerVideoDisplay:farPeerVideoDisplay;
            private var VidDisplay:Sprite;
            public function stratusTest2(){
                addEventListener("addedToStage",initThis);
            private function initThis(e:Event){
                VidDisplay=new Sprite();
                addChild(VidDisplay);
                connectToStratusBTN.addEventListener("mouseDown",initConnection);
                initSendStreamBTN.addEventListener("mouseDown",initSendStream);
                initReceiveStreamBTN.addEventListener("mouseDown",initRecvStream);
                sendDataBTN.addEventListener("mouseDown",sendDataBTNPressed);
            private function initConnection(e:MouseEvent){
                if (MY_peerIDText.text) {
                    farPeerID=MY_peerIDText.text;
                nc=new NetConnection();
                nc.addEventListener(NetStatusEvent.NET_STATUS,ncStatus);
                nc.connect(SERVER_ADDRESS+DEVELOPER_KEY);
            private function ncStatus(event:NetStatusEvent):void {
                INF.appendText("ncStatus: "+event.info.code+"\n");
                trace(event.info.code);
                myPeerID=nc.nearID;
                MY_peerIDText.text=myPeerID;
            private function initSendStream(e:MouseEvent){
                trace("initSendStream");
                INF.appendText("initSendStream\n");
                sendStream=new NetStream(nc,NetStream.DIRECT_CONNECTIONS);
                sendStream.addEventListener(NetStatusEvent.NET_STATUS,netStatusHandler);
                sendStream.publish("__media");
                var sendStreamClient:Object=new Object();
                sendStream.client=sendStreamClient;
                sendStreamClient.onPeerConnect=function(callerns:NetStream):Boolean{
                    farPeerID = callerns.farID;
                    trace("onPeerConnect "+farPeerID);
                    INF.appendText("onPeerConnect "+farPeerID+"\n");
                    return true;
                //VideoDisplay=new MyVideoDisplay(VidDisplay);
                //var camera:Camera=Camera.getCamera();
                //VideoDisplay.attachCamera(camera);
                //sendStream.attachCamera(camera);
            private function initRecvStream(e:MouseEvent){
                recvStream=new NetStream(nc,farPeerID);
                INF.appendText("start receiving from "+farPeerID+"\n");
                recvStream.addEventListener(NetStatusEvent.NET_STATUS,netStatusHandler);
                recvStream.play("__media");
                recvStream.client=this;
                //FAR_PeerVideoDisplay=new farPeerVideoDisplay(VidDisplay);
                //FAR_PeerVideoDisplay.attachStream(recvStream);
            public function receiveSomeData(str:String){
                txtReceiveData.text=str;
            private function sendDataBTNPressed(e:MouseEvent){
                sendStream.send("receiveSomeData",txtSendData.text);
            private function netStatusHandler(event:NetStatusEvent):void {
                trace("netStatusHandler: "+event.info.code);
                INF.appendText("netStatusHandler: "+event.info.code+"\n");
                trace(event.info.code);
    i have 3 input texts: MY_peerIDText, txtSendData, txtReceiveData
    When i press connectToStratusBTN i get ID after than i open another
    browser window with the same swf and paste this ID into MY_peerIDText
    After connection i press initSendStreamBTN in first swf (it is 1st browser page)
    and i press initReceiveStreamBTN in 2nd swf
    After that iwrite down some text in txtSendData TextField (in 1st browser page) and press sendDataBTN
    Nothing happens

    this function doesn't work correctly:
    private function sendDataBTNPressed(e:MouseEvent){
                sendStream.send("receiveSomeData",txtSendData.text);
    because you send not String, but link to the txtSendData.text, which is empty in another peer.
    So, solution is following (not the one, but for example):
    private function sendDataBTNPressed(e:MouseEvent){
             var sendString:String = "";
            sendString+=txtSendData.text;
            sendStream.send("receiveSomeData",sendString);

  • Photoshop CS4 setup does not run. Help plz.

    hi!
    Am having problem with installing the Adobe Photoshop CS4 ( and the same problem with other Adobe  CS4 softwares flash, soundbooth, after effects etc...)
    the setup does not start when i run it. the setup appears in task manager processes but not on the desktop.
    i install it before on the same OS (Win XP SP3), but after formating it, i cant.
    If ever i run the setup from CD, it "Inspect my system" but it does not complete (remain 3/4).
    As AV, i have Zone Alarm Internet security, but i configure it to allow Adobe but still nothing.
    Can anyone help me plz because i badly need these softwares for my work.
    Any software that i can use to force the setup installation to run????

    hi! thx for ur advice.
    for the zone alarm problem, its that, i try to install the software in safe mode but still the same problem.
    For other details:
    its that i just format my pc..
    am using the same windows i used before i format, n photoshop cs4 did install on it and i used the same setup before n it install before i format.
    so i dnt really knw where the problem is.
    am just installing the photoshop cs4 after a post format.
    any further suggestions please.?
    i really need those software for my work. & the problem is that its the same problem with flash, after effects, soundbooth cs4.

  • Premiere CS6 - MXF export with 8 channel audio does not export my audio channels correctly

    Hey Volks,
    when i try to export an mxf file with 8 channel audio, premiere does a kind of main mix in channel 1 and 2 and channel 3 to 8 remain silent. It does not include my assignment of audio channels in the mxf file.
    im very thankful for any idea...

    Hi Dast Media,
    Have you resolve the multi channel export?
    I have the same problem...(the export it's ok but i hear only the first two tracks)
    i need to export  a MXF file with 8 tracks, 6 stereo and 2 mono.
    Thank you for help!

  • Keynote does not export Qucktime embedded movies within slides? Won't play

    I Have a Quicktime movie within one of my slides and when I export a Quicktime .mov file, that particular slide does not run the quicktime movie within it, just stays on the first frame?
    any ideas where I am going wrong?
    Message was edited by: thecount

    I think this is a limitation of the export -> quicktime option
    Keynote does all sorts of tricks to keep the file sizes small- and one thing really gets butchered are embedded quicktime movies- I have two almost show-stopper frustrations with this:
    1- quicktime movies do not loop when exported to quicktime (limitation of sprite track? will look around in live stage pro)
    2- all builds and movies must play in entirety before you can click through- this makes being able to skip around very cumbersome especially if using an indexed presentation

Maybe you are looking for