CS4 Premier Pro Dynamic Link to Encore Question

I have DL'ed (Dynamic Linked) a project in PP CS4 to Encore CS4 and it worked just fine except that in the sequence in PP CS4 I edited some of the audio tracks with render and replace using Sooundbooth CS4. The audio effects I added in Soundbooth CS4 played back as encoded in PP CS4 on the time line but not in the final product from Encore.
What would have caused this? Can added effects in Soundbooth be DL to Encore CS4 or do I have to render out in PP CS4 then pull the assets to Encore?
Much thanks in advance for assistance.

I don't believe that any of the effects I wanted to apply in SB were
actually applied but there are other cuts and edits I would not want to
loose by re-applying the clips to the timeline. Are you saying that the
edits would remain in tact and that theoriginal video and audio with
edits would be replace? Also, you should know that some of the final SB
effects that I added (which were not added to the audio clips) contained
other SB effects that were retain and had to do with filtering noise and
very lager gain adjustments which I would NOT want to loose just to
recover the more subtle effects lost in the last SB effects I wanted to add.
So my concerning is replacing what is on the time line now with raw
files in the project panel.
Does that help in explaining my concerns?
Thanks again!!

Similar Messages

CS 4 Dynamic Link to Encore doesn't work most of the time. Encore stops operating after opening and periodically Premier Pro stops working. I'm told that there has been a problem with CS4 when using Dynamic Link to go to Encore and build CD's. Is there

CS 4 Dynamic Link to Encore doesn't work most of the time. Encore stops operating after opening and periodically Premier Pro stops working. I'm told that there has been a problem with CS4 when using Dynamic Link to go to Encore and build CD's. Is there a way around this? Is there a patch to correct it?

To build CD's???
What problem does Encore have with DL?
If DL is not working properly for you the way around this is to export from Premiere to either mpeg2-dvd for DVD or BluRay H.264 for BD-disks and import the files in Encore.

I can't find the adobe dynamic link to encore in premiere pro...?

New to encore and dynamic link... I'm running Premiere Pro CC and Encore CS6. When I go to send my sequence to Encore (File>Adobe Dynamic Link>..), there is no "Send to Encore" like what I've heard in seen in the tutorials... any ideas?
I've also tried to dynamic link from encore to premiere pro, but it never loads the sequence.

a workaround for the Cloud http://blogs.adobe.com/davtechtable/
-http://helpx.adobe.com/encore/kb/encore-cs6-installed-cc.html
-http://tv.adobe.com/watch/davtechtable/using-premiere-pro-cc-encore-cs6-for-bluray-dvd-and -interactive-video-for-ipadatv-and-mobile-hd/

DirectLink from Premier Pro CC 2014 to Encore - no longer there

Trying to get a Premier Pro CC 2014 sequence into Encore CS6 - and it won't happen.
The DirectLink from Premier Pro CC 2014 to Encore - is no longer there and I've tried simply dragging the required sequences over from the PP CC window into the timeline bin in Encore - it won't do it.
I've tried importing sequences and after clicking on the project to open and select the sequences from it just sits there with a portion of yellow progress bar about 5mm long - doesn't move on.
I am now trying to build the DVD project by putting all materials on one sequence, with chapter markers on it and pushing out a media encoder file in H.264 first. Maybe this will import to Encore.
Hating the fact these two sister programs no longer talk or work together - losing Encore is a major headache.

Thanks Stan,
Interesting you say "Dynamic link only works between like versions. So the only DL for Premiere with Encore CS6 is Premiere CS6" and then show me a video where the guy's first screen pops up with "Using Premiere Pro CC & Encore CS6".
This is the latterday workaround to cover the issue of the removal of the directlink from PP CC 2014 to Encore - which does cover my issue - however I find it strange that Adobe choose to make great play of the DirectLink facility - now employed between programs such as PP CC 2014 and SpeedGrade - yet have deliberately destroyed a great working relationship in the same manner between PP CC 2014 and Encore.
I find this "dictatorial" deduction a real nause...

I imported M2T into CS4 Premier Pro on Mac OSX Snow Leopard does not play

I imported several M2T files into CS4 Premier Pro on Mac OSX Snow Leopard, the files import just fine and when I double click on them, I see the video in the preview panel. However when I hit play, nothing happens. It does not play, just sits on the first frame. Even when I drop it into the timeline, same thing happens. Does not play but if I export what I put into the timeline, the video exported is fine. So I can't edit it, because I cant see where to put edit points. I really need help, need to get this project done asap.

I have fixed this problem myself by searching the forum with argument "playback" "playback_issue". This a known problem. Go to link for a solution http://helpx.adobe.com/premiere-pro/kb/playback-stops-loops-soundbooth-premiere.html
Thanks to myself.
Jim

PPro Dynamic Link To Encore (File Allocation)

Hello all,
First, I've just started using PPro CS5 and what a treat it's been. Thanks to the Adobe team and to the regulars in the Hardware Forum for all the help.
If my work flow is: Assets > Edit In PPro > Dynamic Link to Encore > build IMG... then what would be the best way to spread the files across a 4-drive system?
System
- W7-64 bit, Prod Prem with PPro 5.0.1 (and now 5.0.2 as of last night)
- i7930 OC 3.4GHz (water cooled)
- Asus P6T SE
- 12GB RAM
- GTX470 (with hack, but no longer needed after last night )
- Coolermaster Haf X
- Antec 1000W power
- C: OS and programs (150 GB Velociraptor)
- F: PPro project and source files (captured videos and music) (F3)
- G: PPro media cache, preview files (F3)
- H: "masters", page file (18 GB) (F3)
- no option to Raid (will most likely happen in the distant future)
- DVD-R, BD-R
- so far this system is "fast" and stable for me. Loving it!
Project
- DV > DVD (basic editing with no files or apps applying out-of-the-ordinary tasks)
- Future Use: HDV > BDR (basic editing with no files or apps applying out-of-the-ordinary tasks)
Thoughts
- I'm fairly confident in my PPro allocations after reading Generic Guidline For Disk Setup (http://forums.adobe.com/thread/662972) but always looking to tweak and improve. This is more with the addition of Encore to the mix.
- I'm thinking the Encore files would go on G and the IMG file would be kicked out to H. But if Encore makes heavy use of the media cache and previews on G, then maybe the Encore files and IMG should go on H. Opinions?
- Any better way to allocate the files?
- Any suggestions on my page file size/location?
These initial projects are also my way of fine-tuning my new work flow, computer configurations/settings,
Thanks,
Erik (Pyramid Pyro)

When you dynamic link to Encore, you send it nothing really: it opens an instance of the pproheadless which gives Encore what it wants until it is time to transcode it, and then it compresses the PR sequence using the Encore settings you set for the project and for that sequence (ones like the ones Encore tells you it can't load). So yes, it matters.
Has Encore CS5.1 (the version that is part of PR CS5.5) worked for you before?

Premiere Pro CS4 dynamic link to Encore CS4

I'm a newbe and I have a fundamental question about the Premiere Encore workflow. When I edit a project in Premier and I use the File>Dynamic Link>Send to Encore command, I get "Start New Project" from Encore. How do I update the edits I did in Premiere to a current project in Encore? Is there a way to Dynamic Link Premeire edits while I'm in Encore?

I have the exact same problem. I linked them together, but when I made the change in Premier Pro, the changes did not update in Encore. Everything
I read and watch on Adobe says it will happen automatically, but I'm not seeing it happen. Is there any way to replace an existing timeline in Encore with its updated sequence in Premier?

Adobe pr pro cs4 dynamic link to Encore cs4: updating changes made to pr pro timeline

Recently I did a project in adobe pr pro cs4 and exported it to encore through adobe dynamic link to create a DVD. When I saw some mistakes, I went in pr pro and corrected them. It automatically updated the chages in encore. Finally, I created my DVD and burned it. Next day, I saw a minor spelling mistake so I opened pr pro and encore separately but any corrections I did in pr pro did not updated in encore! What is a better way to correct this as I do not want recreate the whole DVD project again by sending it again through adobe dynamic link?

You have to go into Encore and select Revert to Original for your Linked timeline. Any changes made after transcoding won't show up without reverting. And yes, that means you have to transcode again.

Encore CS4 crashes from Dynamic Link

I can open Encore fine but its when I do Dynamic Link from Premiere to Encore that it crashes and asks me to report the problem. This is the first of me having this problem has we havent used the feature very much. Thanks for any help.

Though written for NLE work, most of the tips in this ARTICLE hold true for an authoring session too. Might be something useful in it.
Good luck, and hope that something helps,
Hunt

Dynamic Link to Encore from Premiere Issues

I created a simple After Effects composition and Dynamic Linked it to Premiere Pro. (All CS4 Programs) I completed the editing process, and Dynamic Linked my timeline into Encore. In Encore, the Premiere Pro timeline appears, but it does not represent the After Effects composition within the Premiere Pro Timeline.
I am unsure as to why this occurs.
Also, I have issues with getting the DVD's I burn to play in other computer/DVD players. The discs I create work perfectly fine in my computer, as well as my DVD player but I am unsure why they do not work in other people's devices. The discs are DVD-R discs.

So you must downrez at some point in the workflow. Some users have problems and/or think they get better quality out of direct PR/AME exports than using DL for this purpose.
I would test the workflow by creating three short test sequences - one with a clip from one camera, a second from the other, and a third with both in a sequence using the same settings you are using in your edit. I would use the "drag a clip" to the new item method for making each of the first two sequences. By short I mean 30 seconds to 2 minutes with a mixture of still and action.
Export using whatever method you pick of those recommended, but use CBR 8 instead of VBR etc. Bring the resulting files into Encore. Yes, look at the files exported on the computer, and look at Encore preview, etc, but also burn to a disk and watch on multiple TVs. There are lots of issues in best quality.

Using Dynamic Link to Encore -- Can't do it in PP CC?

This is the dumbest thing I've ever heard of. Surely I have it wrong. Premiere Pro was upgraded to CC two years ago, but I cannot use the Dynamic Link to create DVDs. I can use my Premiere Pro CS6 to use the dynamic link to get my sequences in Encore CS6, but because there is no upgrade to CC for Encore, I can't use the dynamic link (with PP CC).
Are you freaking kidding me? What's the point of coming up with this amazing Dynamic Link if you can't use it anymore? Somebody is really nuts here in the development of PP CC and lack of development for Encore.
Am I missing something? Should I be building my DVDs in a new CC program that I'm not aware of?

>lack of development for Encore
Adobe was FORCED to stop development, see #8 here for why http://forums.adobe.com/thread/1337952?tstart=0

Dynamic Link with Encore, Photoshop, and After Effects

Intention 1: Im using Photoshop CS5 (PS5) & After Effects CS5 (AE5) to create a DVD menu for Encore CS5 (EN5). I used the 'Film & Video' preset in PS5 to make a standard HD 1440 x 1080px image size; which looks the same in AE5. My problem is in PS5 the 'Pixel Aspect Ratio Correction' size is the size i want the universal size to be. Its a more stretched version which looks better to me, but may not work well with HD monitors (as this DVD will be played on a 17" laptop).
Question 1: Is there any way to have AE5 recognize the 'pixel aspect ratio correction' from PS5 and make the composition settings that size in AE5?
```
Question 2: What are standard sizes for computer monitors that would work welll mostly with the Dynamic Link in AE5 and EN5 working with PS5?

Yes, it can be very confusing. With CS5, however, as long as you keep it all the same, it doesn't require setting. But you do need to understand it.
Just start with the help page:
http://help.adobe.com/en_US/AfterEffects/9.0/WS3878526689cb91655866c1103906c6dea-7f3aa.htm l
FYI, you may have seen these, but if not, help re Encore menus using AE:
From Encore help:
http://help.adobe.com/en_US/encore/cs/using/WSA5513911-0AD1-440c-BDAD-2E0E806B425E.html
From AE help
http://help.adobe.com/en_US/aftereffects/cs/using/WS3878526689cb91655866c1103906c6dea-7e45 a.html

Why Dynamic Link to Encore when CUDA doesn't help Encore?

Ok, so I just finished cutting together a 90 minute video and used Dynamic Link to bring it to Encore. My source files were AVCHD and HDV mixed, so Encore had to transcode them. I attempted to do a transcode before burning, and got all the way to 99% in the transcode when I got an error message saying that I couldn't transcode the file because it was open in another program (I had closed PPro, but apparently it was still open?). Anyway, I tried hitting "build" and got the same error, again at 99%. So I went back to PPro and used it to export an mpeg2-dvd file which I then imported into Encore and burned to DVD.
Now, though I would appreciate some suggestions as to the source of my error when transcoding with Dynamic Link, that's not the root of my post... here it is: I'm not likely to use Dynamic Link again when Encore's (failed) transcode took nearly two hours for my 90 minute video, while doing a direct export from Premiere took only 40 minutes. I can only assume that the difference in time is because PPro is a) 64 bit, and b) can take advantage of the CUDA (I did all my CC and transitions using CUDA effects). Until Encore hits 64 bit and can take advantage of CUDA, I doubt I'll be using Dynamic Link again... anyone have any insight or comments?

I'm not sure that the information is correct. Test project with dynamic link from PR to EN. I right-clicked and picked transcode now. Using windows task manager processes, the only programs using cpu are encore (60-80%) and premiere (10-20%). I happened to have AME open, but it was using zero.
I do not have a CUDA card, but I don't think it matters for this test.
I thought we had been told (probably in CS3 or CS4) that Encore was using ame, but this doesn't look like it. What engine is actually doing the EN transcoding? It certainly appeared to be running internally to Encore. Is there any difference in how Encore is transcoding between using "transcode now" versus transcoding through "build"?

How Adobe Premier Pro's linked video clips are ID in Bridge?

I just finished a FEATURE-FILM in HD comprised of 40 + different Adobe Premier Projects;
Obviously, at the end you end up with many video clips associated to manyAdobe Premier Projects (i.e.; one video clip could be being used by 17 Adobe Premier Projects), and some video clips are associated to none.
So this is the thing: I need to delete 5,000 + useless-not associated video clips, however, to make sure that I am not breaking any link, I need to know that they are, or they are not associated with any of my Adobe Premier Projects.
How does Bridge indicate that a video clip is or is not associated (linked) to an Adobe Premier Project?
Thank you in advance for your help
Barro-THX

Have you tried posting on the Premier Pro forum?
A hint for future posts. If you do not get a response in a reasonalble time rather than reposting, just reply to it yourself with anything and it will be moved to the top of the list again.

Rendering from Premiere Pro Dynamic Link vs After Effects = fast vs slow?

So I'm doing graphics for a show using a fake 3D look in Adobe After Effects CC 2014.1. In segment 1 there are about 30 fonts that display for about 3-4 seconds each. Technically it's just a bunch of 2D layers of text, not a real tricky or intensive thing.
In my Premiere timeline, things render pretty quickly in the sequence. The show is composed of RED R3D 6K files, AJA KiPro quicktime files and some AVCHD stuff. Sequence timeline is 1080i29.97 for broadcast delivery. The sequence is rendering out to ProRes422 HQ. With no graphics, even the RED 6K files render out snappy. So I've brought these new graphics in as a Dynamic Link file. When I try to render out the graphics things get SUPER slow. Inordinately so. I don't get it. I thought the new "Render and Replace" would speed things up (great feature) however that seems to make things just as slow. So now I'm rendering out of After Effects the old fashioned way (each font is a 10 second file or so) with an alpha channel. I chose the 8-bit Cineform codec w/ alpha channel. Things rendered out, as expected, very quickly. A few minutes and all 42 fonts I built were done.
So what I don't get is why render and replace is so much slower than manually rendering straight out from After Effects CC 2014.1. Based on the time stamps from a "render and replace" process I did overnight - it took about 6 hours to render out a handful of graphics. I rendered out twice the amount straight from After Effects CC 2014.1 this morning in like 5-10 minutes. Isn't render & replace basically just rendering stuff out straight from After Effects (or AME) in the background and then just popping it in your timeline? If that's what is supposed to be happening, I don't understand the discrepancy in time. I'll bring the rendered out files into Premiere and see how quickly that video renders over the original video.
I just wanted to throw this out there to see if I'm missing some obvious thing or if this is as expected behavior.
#editorproblems #deliverydeadline

What, exact, version of CC 2014 do you have?
How long have you used AE?
When did this problem start?
Have you tried rebooting your machine?

CS4 Premier Pro Dynamic Link to Encore Question

Similar Messages

Maybe you are looking for