CS4 Premiere is not recognizing .vob files as supported

How do I get and what do I do to get CS4 Premiere to import a .vob file? ...it says it is not supported, but I know that it is. Need I do a wipe and re-install? I re-installed (over top) with no better success. ([email protected])

Not all vob files are created the same
Read Bill Hunt on editing a VOB/MPG file http://forums.adobe.com/thread/464549?tstart=0

Similar Messages

Lightroom 4.4 not recognizing RAW files from supported cameras

I started to get problems with Lightroom not recognizing RAW files from my Fuji XE-1 and Canon 5D Mark 3 cameras but I thought it was a problem with RC. After downloading some files today in 4.4 without a problem I encountered the same error message (unable to inport listed RAW files) again. The files open fine in Bridge. Any idea what is causing this problem?

Hi Geoff
I use a Mac with the latest version of Mountain Lion OS. The image files are being imported from the cards; in the case of the Fuji an SD card inserted in the card reader slot on the Mac and in the case of the Canon a CF flash card in a card reader attached to the Mac.
Appreciate any help you can provide.

Premiere & Prelude not recognizing C300 file structure

I'm working with some new footage in Premiere CC shot on a C300. I have the footage broken down into a folder for each card we shot. Inside each folder is an entire clean copy of the card. If I dig all the way down to each .mxf I can see them and play back (with some issues), but I'm unable to get Premiere to recognize it as a card of footage at any level. However footage shot on our X105 (in the same format as the c300, 30p at 50mb) does show up and, as far as I can tell, they're both the same structure. Any reason why this is happening? I know I can use the Canon XF utility to pull out all the .mxf files and make a clean copy as a workaround, but CC is supposed to support the C300 file structure, isn't it?

Hello - I realize this is an old thread, but I've been struggling with the same problems tonight, I've been looking everywhere for an answer, couldn't find one, and I just figured it out.
The problem: My most recent C300 footage would only show up in Premiere CS6's media browser as "File Directory" material. The "Canon XF" option was greyed out, preventing me from importing clips in the easy and proper way.
The solution: After LOTS of trial and error, I realized that the I had changed the 2 letter prefix on the clip information in my C300 itself! I switched that prefix from "AA" to "CH" (the first two letters of my business). I made the change so that my footage would be easily identifiable in multicam shoots. Bad idea. It turns out that this was the source of my problem! Changing the camera settings back to an "AA" prefix on all my clips allowed me to again ingest my footage properly through the "Canon XF" option in media browser.
Then, I duplicated a previously imported (and non-media browser friendly) card that had the "CH" prefix. I went into the folder and file structure and replaced every "CH" with "AA", and wouldn't you know, that card became readable as "Canon XF" material in Premiere. Make changes to your media at your own risk however. I made sure I had triplicate backups before I tried it.
Hope this helps someone!

Premiere's not recognizing my avi files

I have a bunch of avi files that I made a few years ago. I can't remember what codecs were used exactly. I now have need to use this files again and do some editing to them but Premiere's not recognizing them for some reason. CS6 imports the audio but not the video and CC won't import them at all. The video's play fine off the desktop but won't work with Premiere. Anybody have any suggestions on how I might be able to get these working? Maybe recommend a program I can download to convert them? I have the entire creative cloud so there might even be another adobe program that could help me with this that I'm just not aware of.
Thanks

Report back with the codec details of your file, use the programs below... A screen shot works well to SHOW people what you are doing
http://forums.adobe.com/thread/592070?tstart=30 for screen shot instructions
Free programs to get file information for PC/Mac http://mediaarea.net/en/MediaInfo/Download

When I plug my ipod touch into my PC, it is not recognized in file explorer

When I plug my ipod touch into my pc, it is not recognized in file explorer

It does (should) show up in Explorer on a PC. On a Mac it does not show up in Finder
Try:
iOS: Unable to import photos to computer
Have you installed any camera or scanning software?
If you have a camera, does the camera show when you connect to computer?

My lightroom 4 will not import my files from my compact flash card . It has been working for years with out fail but now there is no import previews and it says the files are not recognized by raw format support in LR

I have lightroom 4 I've had it for years and it has imported my raw files from my CF card without issue . Now when I plug in my CF card to import new files it says import operations not performed and there are no image previews . When I continue by hitting "import" I get a pop up window that states "the files are not recognized by raw format support in Light Room"

Don't feel too bad. If the D4S has as many menus and custom functions as my Canon 5D Mark iii its easy to get messed up.
If you downloaded from the link I gave you it will be Lr 5.4. The link was just to show you when the D4S was supported. The newest version is 5.7.1 and can be downloaded here. Don't know your OS so you will have to pick Windows or Mac. Product updates
On my Mac I just run the downloaded installer program (its a full version and not an small update) and it installs the new version and erases the old version. If you are on Windows you will have to get help from a windows person.

Iphoto 11 is not recognizing jpeg files downloaded from camera and card reader. Nor will it allow me to transfer from image capture

iphoto 11 is not recognizing jpeg files from either the camera and card reader. Canon Eos rebel dig. Nor will it allow me to transfer images from image capture to iphoto. No problem downloading to image capture.

Sounds like a damaged card. Get your photos off the card with Image Capture and then reformat the card in the camera. Take some pictures and see if the card is recognized by iPhoto and the card reader.
OT

PS CS3 not recognizing Raw Files and converters Ive downloaded not working..Why not?

PS CS3 not recognizing Raw Files and converters Ive downloaded not working..Why not?

Do you seriously think we can answer that with zero information from you?
Please give us:
Operating System/version
Photoshop version number
Amount of RAM installed
Hard drive(s) free capacity
Video card make and model
Camera make and model
Then describe what you have done so far and the symptoms you are seeing.

CS4 v4.1.0 some vob files import only first few seconds

I have a mini-DVD camcorder that creates vob files which I wish to edit in Premiere Pro CS4 v4.1.0.
I find that there are four .vob files on the DVD, one is a chapter index, the other three compose what I recorded.
I am able to import all of the latter three, however, only the middle one includes the full track of 16 minutes. The first and last one import as only about 10 seconds instead of the seven minutes each is.
I tried to work around using DGIndex.exe and MeGUI Modern Media Encoder for the other two, but this only gives me the video, without the audio.
So, either I need a way to rip the audio off the two vobs and hopefully not mess up the lip sync too much or to get the vob files to import correctly into Premiere Pro.
Any help appreciated. This is Windows XP SP3.
Thanks.

Well, there are VOB's, and then there are VOB's. Being a Video Object, they can contain a lot of "stuff." This ARTICLE will give you a bit of background.
Dag's suggestion is one that many use and the conversion program gets high marks from many users.
Good luck,
Hunt

Photoshop not recognizing PSD files

My PSD files are not being recognized. When I go to Properties and then Open With, and browse to the Photoshop application as usual, I am unable to select Photoshop as the program to open my file. I am completely baffled.
It looks like the Open With function is not recognizing PhotoShop, and I do not know if this is a Photoshop error or a Windows error.
Other Adobe programs are working and are recognized just fine. I am using Windows 7 and Photoshop CS4. I am running up-to-date Norton 360 so it is extremnely unliklely to be a virus.
Help please!

Sounds like a basic system problem, not a problem with Photoshop per se...
First, Photoshop should have installed itself so that it would automatically be in the list of programs available to open that file type.
Second, if it's not there by default, browsing to the Photoshop.exe file should make it work as you expect.
I've just opened a file from my desktop using Right Click, then Open With, and choosing Photoshop.exe as you have described. However, in my case Photoshop is already in the list of Recommended Programs.
Out of curiosity, do you see it in the list of "Other Programs" toward the bottom of the Open With dialog? You'll have to click on the little arrow to the right to see them.
-Noel

Premiere is not recognizing my camera. Can you help?

I have a Canon XA10 and I'm using the usb to attempt to upload clips. My camera is not being recognized in Premiere so I'm unable to capture my clips. Help!

Read below for more information
Metadata contained in folder http://forums.adobe.com/thread/1015001?tstart=0
-and http://helpx.adobe.com/premiere-pro/using/transferring-importing-files.html
-http://helpx.adobe.com/premiere-pro/using/importing-assets-tapeless-formats.html

11.1.2 essbase upgrade not recognizing application files location

Hi all
I am upgrading an essbase database (Planning) from 11.1.1.3 to 11.1.2.2,
I trying to configure 2 essbase servers (original 11.1.1.3 and new 11.1.2) running on 1 physical server using different ports and filesystems
Following all the steps in the Deployment guide in Preparing Essbase Data for Upgrading,
I ran all the steps in the Manual file transfer instructions to copy from source machine to target machine.
I have started the steps in rehosting the essbase applications,
- Completed enable lookup by cluster name:
- I completed the server to cluster script on the HSS box (updateEssbaseServer )
when i went to run EssbaseUpdateEssbaseServer one of the planning databases did not update i got this error
[Mon May 21 14:03:50 2012]cphypd.sherwin.com///admin/Error(1002097)
Unable to load database [PlanFcst]
Error loading application = 1002097, continue...
looking in the logs i found that it was trying to go to the prior location of the 11.1.1.3 instance and not the new location of the 11.1.2 instance
Why is it not recognizing the new datafile locations

I saw this in the guide
I followed these instructions and specified a different directory when running the staging tool, the script was empty, i do not believe it should be, it should contain mapping info to update essbase.sec, which it did not
On the Configure Essbase Server page, for Full path to application location (ARBORPATH), specify the location of the existing or replicated Essbase data.
Note:
If you replicated data to a new machine, and if you selected Differently-named disk volumes, table spaces, or ARBORPATH on source and target or Consolidated disk volumes or tablespaces on target by exporting data during data replication, you must run a script immediately after configuring Essbase to update the Essbase security file to reflect the disk volumes on the upgraded system. The Essbase Staging Tool provides a script to update the settings in the security file (essbase.sec):
Start the Essbase Server and EPM System services. Navigate to ARBORPATH/app on the machine that is hosting the upgraded Essbase Server and run the following script using MaxL:
%ARBORPATH%/bin/startMaxl.bat -u userName editagtsec.msh
where userName is the Administrator user name to connect to the upgraded Essbase server. The script prompts you to enter the password.
Note:
editagtsec.msh could be empty in some scenarios. For example, when you launched the Staging Tool, the Staging Tool reports on existing volumes. If no volumes are listed, editagtsec.msh is empty.

IPod classic - iPod and iTunes is not recognizing music files

Here's the problem I am having:
iPod is saying there is "no music" on the iPod. Yet, when you view the settings and files it shows there to be 70GB worth of data - that is how much music I have. iTunes is also not recognizing iPod either. I also get an error stating:
"iTunes cannot read the contents of __ iPod. Go to the summary tab in iPod preferences and click RESTORE to restore this iPod to it's factory settings". It's also not reading anything from the Music database.
This is the 2nd time I've had this error in the past two months. It happened in August - I noticed it had happened as I disconnected my iPod from my computer. The first time was when I tried to eject from iTunes. It said the files were currently in use by another program (I had nothing running, what program?), so I "safely removed" as I would a USB device. The 2nd time happened similarly, though not before iTunes locked up totally and would not let me eject from there. The last time I had this problem, I also removed each file/folder manually from iPod control, to hard drive, and restored iPod, and put them back on iPod. However, this time I am not so fortunate as it gives me an error when I attempt to copy stating either the "parameter is incorrect", or "cyclic redundancy error". Some of these files that are giving me this error at some point during the process have been accessible and working fine, and other times they are not, as I successfully copied five folders worth of data without error, then after I started getting errors with the next folders, attempted to copy one of the same folders into a different directory, which THEN gave me an error. I'm not sure what's going on here, but this is proving to be quite the pain and never experienced these problems with my 60GB iPod, which I did not take nearly as good of care as I have this one - and is still working with all of my original music on it.
My question is how do I solve any of these errors, and what would be the best course of action to take? I have a 160 GB Classic iPod. Warranty expired (probably) September, and purchased from Circuit City.
*I DO NOT wish to "Restore" unless absolutely necessary as I have 18,000 songs on my iPod. Restoring this would be cumbersome, and I keep my music on my iPod as I do NOT have the hard drive space to store it with*
Please help!
-dgo

Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: How to back up
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store

DNG not recognizing NEF files

.I have Photoshop CS5 and I recently downloaded Adobe DNG Converter 7.1 to convert my NEF files so that I can open them in Camera RAW which was working for about a week, now it is not recognizing them. Any suggestions as to why?

I don't think you want to use the DNG converter on existing DNG files. You would want to use it on your original NEF files taken by your camera.
In the DNG converter, notice that the prompt is asking for the FOLDER that contains the raw files. Choose the folder, but don't double click on the folder. Don't expect to see your raw files listed. Just choose the FOLDER, and don't try to go any deeper. If you want to convert individual NEF files, drag/drop them onto the DNG converter icon. The program will open and will convert that one file.
Once you have chosen the folder containing your raw files, click on the convert button, and you will see each file listed as it is being converted.

Lightroom is not recognizing the files from my 7D mark II.

I just bought the Canon 7D mark II. I did a shoot Saturday and I'm trying to download the raw CR2 files into Lightroom. Lightroom is not recognizing them. What do I do?

anticandy wrote:
The other guy was a dick
Try to understand from another point of view:
Those of us who spend a lot of our time helping other users in this forum get mildly annoyed when another post comes up asking the same question just answered so many times.
I can see multiple posts with my eyes on the first page, and a search turns up multiple pages, so forgive me if I have a hard time believing you searched very hard (if at all).
So, I think the characterization as "dick" is unwarranted (not to mention vulgar & derogatory) - I answered your post, but did include a note of sarcasm and mild annoyance, which was my intent - I wasn't a dick, per se, but I'm glad the note of mile annoyance came through - consider practicing your search technique..
Rob

CS4 Premiere is not recognizing .vob files as supported

Similar Messages

Maybe you are looking for