CS4 Program Dialog Box Buttons Unclickable

I am running Windows Vista 64-bit and just installed and updated Adobe Creative Suite 4 Production Premium. It seems that I am unable to use my mouse buttons to click on anything that pops up in a dialog type box (other than the X to close it) in all the programs in the suite (premiere, soundbooth, etc.). The mouse works fine in what I will refer to as the work area. I can navigate the dialog boxes with the tab and enter keys of my keyboard but it's kind of annoying. Anybody come across this before with CS4 or Vista?

Bob and Dov,
Thank you for your quick responses to my post. I was just using generic windows drivers apparently so I took your advice and downloaded and installed Vista 64 bit drivers for my Logitech 470 optical mouse. The new drivers didn't seem to make a difference. I have done some more testing. What happens is when I first open Premiere, I can click anywhere on the buttons at the 'Welcome to Adobe Premiere Pro' and they seem to work as expected, except I have to be at the lower right corner to click the new project button. All the buttons on the next screen 'New Prject' seem to work fine. If I click OK a dialog box 'Save As' comes up and I cannot mouse click anywhere to get the Yes or No buttons to respond. I can continue on if I hit tab, then enter. At the 'New Sequence' screen I cannot click in the area to change the name of the sequence, the OK button works fine, and if I try to click on the cancel button it scrolls the area on the lower part of the screen down instead (the area with setting information in it). I also cannot click on the scroll bar in that area. Once I mouse click OK past that everything in the work area seems fine to click with the mouse. Even bringing up boxes like preferences and such from the drop down menus seem to work fine with the mouse. A similar thing happens in Soundbooth. I haven't checked all the programs out but it's pretty weird and seems to at least span more than one program in CS4 but not affect every pop up box. I haven't noticed any similar issues with any other programs I'm running.

Similar Messages

Add Image to a Conformation Dialog box button

Hi All,
Ho to add Image to a Conformation Dialog box button?????
2. How to put <b>X</b> (to cancel) at right upper corner of dialog box.
null

Hi ,
It would not be possible to add images in it. Use dialog boxes instead.
Create a view ... add an image UI element ..use imgSource as ~sapicons/image name or paste the image in src/mimes/components/ur comp name and give that for source.
You can create linktoaction.. and on its image property add an image for X and put that in one corner of the dialog box. and execute cancel action. when its clicked..
Regards
Bharathwaj

How to change gtk theme dialog box button appearance when using tab?

Hi,
I'm using candido as my gtk theme and have noticed that when a dialog box pops up (Yes / No), it is extremely difficult to tell which option is highlighted. How do I change this appearance? I searched through the gtkrc and even used gimp to manipulate the images used via trial and error to see if I found one that worked. Can someone familiar with gtk themes tell me which gtkrc or image to alter to affect this appearance?
I use tab to select my option a ton and hate not being able to tell what I'm looking at.
For reference,
- here is the current look (can you tell which one is highlighted? It's "Cancel" -- just slightly bigger or a fine line around it) LINK
- here is the gtkrc if that helps? LINK
For one more point of clarification, I'm not talking about the button appearance on mouseover. I have identified that the button-prelight.png file changes that. I specifically am talking purely about a dialog popping up and then using the tab key alone to highlight through the options. I really like this theme, but this one thing drives me crazy. This appearance changes when I select different themes with lxappearance, so I've narrowed it down to being a gtk-theme issue, not my openbox theme or icon set.
Many thanks!
Last edited by jwhendy (2011-02-02 18:11:10)

HI,
Debug the program after you press the CANCEL button , you will get where the conrol is flowing , And instead of using
Leave to screen '910' use Leave to screen 0.
Regards,
Madhukar Shetty

Help Product Improvement Program dialog box won't go away

When I re-opened the beta version of Fireworks CS4 last
night, there was a dialog box asking me whether or not I wanted to
participate in helping Adobe with product enhancement by submitting
information on my usage of Fireworks, but the bloody thing will not
close. There's options to select yes, no and a few other things,
but whenever I select anything it won't go away. Does anyone else
have this problem? And if so, is Adobe aware of it?

quote:
Originally posted by:
mcmmem
When I re-opened the beta version of Fireworks CS4 last
night, there was a dialog box asking me whether or not I wanted to
participate in helping Adobe with product enhancement by submitting
information on my usage of Fireworks, but the bloody thing will not
close. There's options to select yes, no and a few other things,
but whenever I select anything it won't go away. Does anyone else
have this problem? And if so, is Adobe aware of it?
Yes, this problem has been reported already in the CS4 Beta
forum.
Reading
that topic, it appears that only Mac users reported the error
so far, and the only way out was to quit and restart Fireworks. I
think it would be a good idea to post your case there too.
SiamJai
~~~~
http://design.thaiwonders.com
- Innovative Fireworks Tutorials

Black border around dialog box, buttons, and everywhere

It's just started behaving bit crazy. Suddenly black borders started appearing everywhere with Leopard. I have tried to restart the machine a few times but no luck. They appear with OS dialog boxes, around buttons, Safari, Most of the applications, text fields and everywhere.
Please help if anyone has a solution. Thanks

I think the issue is caused by the Apple Voiceover Utility. Part of its function for the visually impaired is to highlight the button or text item that it is going to speak. i suggest you turn off Voice over either going to System Preferences -> Universal Access and Making sure that voiceover is turned off. Alternatively press Apple(Command) F5 to turn it on & off. The black rectangles should go away. If you want voiceover but not the black rectangles. You can open the voice over utility and change the settings to the text is still spoken but without the highlighting.

Firmware update 4.1.9 dialog box buttons?

I am trying to resurect my daughter's slot loading iMac after it was trashed by the infamous firmware bug. Before I found about this, the PRAM was zapped and a full system reset was performed, leaving the iMac in the situation where when it was turned on, after a few seconds it shut itself off. I have used the Giles Kenneday solution to disable the internal monitor and now the iMac doesn't shut down, but the image produced on the external monitor is so bad I can barely make out anything. I can boot up into OS 9.2.2, have the firmware update icon on the desktop and am ready to do the firmware upgrade 4.1.9. I have gotten past the license agreement screen, but the next dialog box has four or five buttons that I can't identify, so I don't know which to click on to start the upgrade. I've tried the one on the far right but it didn't work. Can anyone who has completed the 4.1.9 Firmware update, or is about to do it, please tell me which button on this screen starts the process? Also where is the button on the next dialog box that causes the iMac to reboot? I have been unable to find screen shots of these boxews anywhere.
Slot loading iMac G3 Special Edition Mac OS 9.2.x

Mauro, all, and anyone experiencing blank screen problems with a slot loading iMac,
First (and most important) I have been finally able to repair the problem using a combination of the ideas presented by Giles Kennedy and the additional encouragement from Mauro. For those who encounter a slot loading iMac that either has no screen display OR shuts down automatically a few seconds after booting there is HOPE. There are several messages in this forum describing a problem similar to the one I experienced. I suggest that those encountering this read Giles Kennedy's excelent article at http://www.gileskennedy.com/panthereatsimac and mirrored at http://www.capecodgraphics.com/imac_firmware.htm. Note that this problem existed in several levels of severity. I had to go the entire route, obtaining an old mac floppy drive cable, bridging four conductor of the internal video cable, and doing an almost blind firmware update, but it can be done. Your problem might be easier for repair.
Second - Although all reported instances of this problem have been assodiated with attempts to install some version of OSX, My daughter's iMac failed while running OS 9.2.1. She swears that no attempts were made to install OSX... so it appears that these problems may be more extensive than previously reported. I suggest that anyone running an iMac under OS 9.2 immediately do the 4.1.9 firware update to avoild the problems I experienced.
The entire process I went through was too extensive to report here, but the final steps that brought succes will be found in my insertion in portions of Mauro's post below:
J Evans,
In the process of installing Firmware update there is
not a dialog with 4/5 buttons, I have checked with
Resedit. What do you see is an artifacts of the
screen. The Agree/OK/Update are ALWAYS on the right,
the first on on the right.
Actually the first screen presented after launching the updater (the license agreement) does have four dialog buttons. I still don't know what the others are.
I cannot remember if the DEFAULT button is the
Agree/OK/Update but, have you tried to use the
keyboard "RETURN" in place of the mouse ???
Although using the Return button to accept all defaults did not work with the battery and bothe memory cards installed, it DID work with the battery removed and only one memory card in place.
Before I found about this, the PRAM was
zapped and a full system reset was performed, leaving
the iMac in the situation where when it was turned
on, after a few seconds it shut itself
off
iMac thinks that there is a fault in the CRT or its
circuit board (the PAV - Power/Analog Video - board)
and shuts itself down after about 7 seconds.
You might try removing all the memory, the Airport
card (if present) and the logic board battery, and
leaving for 24 hours. Reset the PMU, replace memory
(one card only, in a different position from before),
and plug in mains power. You are now ready to
power-on the iMac using the button on the front. boot
from the HD as normal
The fault that the old firmware "thinks" it detects can be overcome using the floppy drive cable/bridge four connections solution described in the Giles Kennedy article. If the internal cable is kept in place, the iMac will continue to shut itself down during the boot process.
Jack

Preferences dialog box: buttons without text

Since updating Dreamweaver CC from 13.0 to 13.1, the buttons "Apply" and "Cancel" of the preferences dialog box are without text. Also clicking "Apply" has no effect, only "Cancel" works.
Disable sync settings, and also a reset of Dreamweavers preference files within ~/Library/Application Support/Adobe and ~/Library/Preferences/ did not solve this issue.

Just to update: Issue got resolved on a re-install .

Keyboard control of dialog box buttons

Terribly sorry because I'm sure this must be answered more than a few times, but I just can't seem to find it!
Can AppleScript dialog boxes activate buttons in response to keyboard input?
Lots of Aqua apps let me use tab to move through the controls in a dialog box, then press space to activate. Even back before OS X, I could activate a button by typing the first letter (probably while holding down the command key).
Can I script that sort of behaviour without using Studio?

Thanks Cam -- Yes, you're right: I can use tab and space.
I'm just using the display dialog command (e.g., 'display dialog "Hello, world" buttons {"Button 1", "Button 2"})
I could change the prompt for the worse to take advantage of return and escape keys.
Does Studio let me assign or otherwise use other keyboard controls in dialog boxes?

Dialog box buttons appear out of order

Hello,
I am developing my app using a Firefox browser & Windows. I have a Javascript pop-up dialog box with OK and Cancel buttons (appearing in this order, OK button to the left of Cancel). When I run my app using Firebox & Unix, sometimes the button order shows up as Cancel and then OK. This has lead to people clicking the wrong button because they are used to seeing the OK button to the left of the cancel button. Is there something I need to do so that when my app is run on a Unix box that the buttons appear consistently with the OK button to the left?
Thanks, Laura.

Has anyone else experienced this behavior?

Modifying Dialog Box Buttons

I have created my own custom buttons that extend JButton. However I do not know how to modify Dialog Boxes to use the custom buttons as opposed to the standard ones.
Is this possible?
Thanks for your help,
Adam

Swing related questions should be posted in the Swing forum.
However I do not know how to modify Dialog Boxes Well you typically extend JDialog to add your own components so its no big deal.
If you are referring to a JOptionPane (then your question should be clearer), I guess you would override the addButtonComponents(...) method of BasicOptionPaneUI to use your customized button.

CS4 - original dialog boxes instead of adjustments panels?

Is it possible to have the original curves or levels (or whatever) dialog boxes open when double clicking adjustment layers, or are we stuck with the adjustments panels? The original dialog boxes, which are the same as those that can still be accessed via the standard ctrl-m, ctrl-l, are larger and allow finer adjustments.
I know I can enlarge the new adjustments panels a bit, but they are still 30-40% smaller than the original dialog boxes from CS3 and earlier.
I guess my question boils down to whether or not we can turn off the new adjustments panels?
Thanks,
Chuck

It's true that the new Adjustment Curves panel is smaller than the "non-layered" Curves panel but the important part - the actual curves grid - can be made identical in size. In other words, the new Adjustment panel has less clutter!

Dialog boxes freezing captivate

Captivate 7 appears to work fine... unit a dialog box displays. Such as "do you want to save" or "the project has many unused items,,, you can delete them." When a dialog box displays Captivate 7 totally freezes. If i mouse over the Save, or OK or other dialog box button, the button highlights (as usual with Microsoft windows), but clicking on it does nothing, What could be causing this?

Hi There,
Is this issue occurs with a particular project or with a new/ blank project as well?
Try to launch Captivate in administrative mode by right click on it and choose run as administrator.
Also try to reset the Captivate preferences by close the Captivate first and go to C drive / program files or program files x86 / Adobe / Adobe Captivate 7 / utils / run CleanPreferencesWin.bat file.
Launch Captivate and check it's performance.
Regards,
Ajit

How can i call the certificate selection dialog box from source code?

How can i call the certificate selection dialog box from source code?
NB: Of course if i have more than one certificate in the Microsoft Keystore 'My'.
Thank You in advance

I found an example of the "TestStand UI Expression Control.ctl" and it works just the way I need it. (check the link)
Proper use of "TestStand UI ExpressionEdit Control" in LabVIEW http://forums.ni.com/ni/board/message?board.id=330&requireLogin=False&thread.id=10609
The "Expression Browser Dialog Box Button" F(x) stays disable while editing the VI, however it become available when the VI is called from TestStand.
Thank you,
Hecuba
Mfg. Test Engineer
Certified LabVIEW Associate Developer

Upgrade to Acrobat Pro XI on Window 8.1 downloads, installs and configures. Then pressing the launch button in the dialog box doesn't launch program.

Upgrade to Acrobat Pro XI on Window 8.1 downloads, installs and configures. Then pressing the launch button in the dialog box doesn't launch program.

Using the start button, Acrobat Pro should appear. But it might not, being Windows 8. Maybe it puts an icon on your desktop, maybe not.
How about checking c:\program files (X86)\adobe\acrobat 11.0\acrobat. If you have this folder, look for Acrobat.exe.

How to Display an Alert or Dialog Box in Flash CS4?

I would like to have a quick message displayed on the screen for a few seconds after a user clicks a button. I can't seem to find an Alert Box or Dialog Box option in Flash CS4...can anyone help?
Thanks.
Dave

as2 has the window component. and for both as3 and as2 it's pretty simple to create your own movieclip to use as an alert window.

CS4 Program Dialog Box Buttons Unclickable

Similar Messages

Maybe you are looking for