CS4 replacement CD needed
My CS4 Production Premium CD#2 has got a huge crack in it (it's halfway to being broken in half), and I'm wondering if there's any way to get a replacement for it somewhere. I've tried and looked around for a solution to this problem but haven't found any, so I would really appreciate all the help I can get!
Thanks in advance!
Unless you are on gold support and have access to CS4 downloads, there is no official way to do that. Simply find someone else with a CS4 suite and borrow the discs/ burn a copy. Also demo DVDs as handed out on user meetings and tradeshows would work, but may not include additional content and onyl the main programs.
Mylenium
Similar Messages
-
I am running Mac OS 10.10 and trying to run Illustrator CS4. CS4 says it needs Java SE 6 Run Time, but I can not load that into OS 10.10. What to do?
Jacob,
You are genius! I search all over the net and had a long chat with Apple without success. 30 minutes after posting the Abobe Illustrator forum, I have a link that works!! Many thanks.
Jim -
How can I buy or license InDesign CS4? (I need to work in CS4 for a client, even though I have a CC subscription.)
There's no way to buy CS4 any longer through official reseller channels. If you can get the work done in 30 days you can use a trial, which you can download at Download and Installation Help
-
Replacement Key needed for Satellite L40-139
Hi,
Please can anyone tell me where I can find a replacement key for the above laptop?
I cant seem to find one anywhere!
Thank you,
ClaireHi
As far as I know you an remove the single keycaps but I doubt you could order just view keycaps instead of the whole keyboard.
Usually if some keys are broken, then you would need to replace the whole keyboard
At the other hand if you could try to purchase a second hand keyboard for L40 and could replace the needed keycaps
But note buddy; if the keyboard buttons dont functions, then a keycap replacement would not help you. -
ASA 5505 Failure replaced and need to move the license key?
Can someone point me in the right direction? My ASA 5505 died due to a power surge and I swapped it with a spare. I had Security Plus and a 50 user license and need to move the license keys from the failed ASA 5505 to the new one. I kept both my emails with the activation keys, but not sure how I get this transferred? Thanks in advance.
JoeI think this is totally unacceptable. For anyone else who uses a 5505 at home and has bought licenses and the hardware out of their own pocket, the idea here should be that you've already bought the hardware and the license. Seems obvious, right?
Yes I can see the license being device specific if not only because that's the way you've designed your licensing activation schema; but if I've just had your product fail and bought another replacement, there should be an understanding or agreement between Cisco and the user that we can reinstate any licenses we've already bought.
Do you really believe it's fair to make someone buy something from you twice, something that they've already bought from you? Do you actually believe that? I believe that the people in the Cisco Licensing department would agree with my viewpoint and I have a pending case with them for this issue right now. I will post my result here.
Make your products last and perhaps I can give credence to your licensing beliefs, until then your products fail and so does your licensing logic. -
PowerBook G4 really slow, hardrive replaced. Need Assistance
Hello There,
The hardrive from my 1GHz PowerBook G4 with 512 MB DDR SDRAM, stopped working about two months ago and I went to an Apple store to fix the problem. I have worked with it for the past 5 years, without any issue until the disk broke down.
Before this happened, I was able to work with InDesing CS3 and Photoshop CS3, simoultainously withouth a problem. Since the hardrive got replace, something changed. The machine really seems to have major difficulties handling several applications open.
Even if I only have Firefox, InDesign and Photoshop, it has a really hard time moving from one application to the other.
What do you recommend? What can I check to see where the problem is? How much space is recommended in my hardrive so that the computer has enough room to have this applications open?
Thank you so much for any info you can give!!
E-1000You can add a 1G module to the empty slot; that would give you 1.5G and should be adequate for your needs. To get to a total of 2g you would need to remove the 512MB stick to make room for two 1G sticks.
RAM is user-installable. Instructions are in the original manual, or contained in a pdf file linked in this article:
http://docs.info.apple.com/article.html?artnum=26268
The 1Ghz PowerBook is said to require RAM that supports "bus slewing." I don't know what this means but I would be inclined to buy online from a vendor that recognizes this requirement, like this one:
http://www.datamemorysystems.com/apple_info/Apple_G4_PowerBook_1GHz_17_Memory1209.asp -
Problem installing Creative Suite CS4, major help needed
Basically I need help asap because I uninstalled my previous versions of PS etc to install this and work has to be done.
I installed the "Adobe Creative Suite 4 Master Collection" yesterday without problems, but then something happened to my machine last night which forced me to do a system restore.
I restored and the suite was no longer installed, since then I have had many problems trying to install it again.
It keeps getting up to about 5/8 of the progress bar then it freezes on "Currently installing Adobe Flash Player 10 Plugin". I did have trouble trying to install "Adobe Flash Player 10" before and finally managed to do it, but it's still freezing when installing the suite.
Help would be greatly appreciated.
Many thanks in advance.
LiamOK now it's installed, all of the programs work fine except for photoshop.
I did have photoshop cs2 and cs3 previously installed.
I load up "Adobe Photoshop CS4" and it starts loading, it says "initialising" etc and then when it gets to "Building TWAIN menu items" it pops up with the "Adobe Photoshop CS4 has encountered a problem and needs to close. We are sorry for the inconvenience" message window asking me to "Send Error Report".
Any ideas please?
Regards
Liam -
I'm running Windows 8.1. I had to create a new account identity because of some corrupted files. Now I can't open Reader V9. Message comes up saying it's part of a Suite (CS4 Web Design) and I need to open other module first. I tried opening Dreamweaver, got error message 148.3 and program closes, says to contact customer support. My CS4 Seb design suite is old and I've since gotten PS Extended CS5 and PS Extended CS6, but not a whole Suite. Perhaps the license needs to be re-entered but the program closes before I can do anything. Please advise.
What is your operating system? Can you post a screenshot of that message: https://forums.adobe.com/thread/1070933
I also think you should use a newer Reader version on Windows 8.x, i.e. 10.1.10 or 11.0.07. -
Pioneer DVD-RW DVR-K06 replacement drive needed
My iMac started having problem ejecting DVD/CDs and now the drive is damaged. I need to find a replacement drive (AppleCare expired). I know there are 2 possible types of superdrives were used on the late 2006 24" iMac. One is with a 12.7mm slot and the other one is 9.5mm. I am not sure which one I should get but here is my specs. I think the DVR-K0-6 is discontinued. Could someone tell me what replacement drive I can use? thx CK
Pioneer DVD-RW DVR-K06 Firmware: Q609 ATAPI
Model Identifier: iMac6,1
Processor Name: Intel Core 2 Duo
Processor Speed: 2.16 GHz
Message was edited by: calvin kiHi calvin ki
You can get either new or refurbished OEM drive from WeLoveMacs
New Apple Original Part > http://www.welovemacs.com/6614391.html
Refurbished pulled from a working machine > http://www.welovemacs.com/6614391r.html
Or for way less $'s an External Drive > http://eshop.macsales.com/shop/firewire/optical-drives/
Dennis -
CS4 replace image issue - Windows 7
New laptop - Dreamweaver CS4 - Windows 7...
If i insert an image to a document it puts the image in fine. But if I want to change that image I select that image and hit the "browse for image" (little folder icon) and select a different image in the" Select an image source" dialog box and click ok - nothing happens. The dalog box disappears and the old image remains. Almost as if i clicked cancel instead of ok.
Since this is a new laptop I'm not sure if it's a hardware or software issue. Never experienced this on my work coomputer on Win XP and CS4.
Any ideas?
JohnI'm not the only one... found this thread after I started my own (murphy's law) - same issue I'm having... http://forums.adobe.com/message/2511455#2511455
So I guess it's not the same issue??
sitewidecf: i know you only work in code view - but could you humor me and try to replace an image in the design view as I described and see if you can replicate the issue.
thanks
John -
CS4 - Does one need to Premiere render before Encore transcode?
Production Suite CS4
Question: Does one need to Premiere render before Encore transcode?
I have an Encore asset which is dynamically linked to a Premiere sequence. Do I need to render the sequence in Premiere before transcoding it in Encore i.e. is Premiere rendering necessary? Thanks in advance.Adobe Encore technical support told me that Encore will not automatically render the Premiere sequence. You must manually render the sequence in Premiere before transcoding in Encore.
-
iPhone got damaged
got a new set as replacement
all data is lost
how to recover the data?When setting up the new one, you need to restore it from a backup of the old one.
If you had iOS 5 on your old one:
Your new phone should also have iOS 5, so on the setup screens, wait until you get to the menu that allows you to select "Restore from iCloud Backup."
If you did not have iOS 5 on your old one:
You can plug in the new phone to iTunes, select Restore. Let it do it's thing, and when it's done, select Restore from Backup. -
Going to Apple Store for Replacement tomorrow Need Your Opinion!!
I been having issues with push notifications from the very beginning when i purchased this phone. i use twitter often and this NEVER happened on my other iphones so I'm getting replacements. Is there any way I can test it out if it works or not at the apple store or do i need to get my phone activated again? also would they take out the sim card for me since i dont know how and put it back inside the new phone or do they only remove it and do i need to have it get it popped back the sim card at the verizon place?? it would be very nice if i can test this out cus im tired of keep getting buggy iphones.
Make sure your iPod is backed up (connect it to your computer and sync it if you can), then take just the iPod Touch to the Apple Store. Bring money or a credit card.
-
Broken LCD, replacement part# needed
i broke the screen on my Compaq Presario CQ60 215DX.
it is a " 15.6" HD BrightView LED Display 1366 x 768 "
what's the replacement part# for this screen please?
thanks!
This question was solved.
View Solution.Hi,
You may need more than just the screen. Please use the following manual to find out the right part(s) for your machine:
http://h10032.www1.hp.com/ctg/Manual/c02985882.pdf
Good luck.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem. -
K330 Motherboard replaced but need help.
I got the motherboard replaced from the recall. But the problem is the tech did not put in the Model # and serial on the motherboard. Is there any motherboard manuals that might tell me if the specs have been upgraded etc??
From CPU-Z:
DMI BIOS
vendor LENOVO
version DKKT20AUS
date 03/16/2011
DMI System Information
manufacturer LENOVO
product INVALID
version Lenovo Product
serial INVALID
UUID {FFFFFFFF-FFFF-FFFF-FFFF-FFFFFFFFFFFF}
DMI Baseboard
vendor LENOVO
model To be filled by O.E.M.
revision To be filled by O.E.M.
serial INVALID
DMI System Enclosure
manufacturer To Be Filled By O.E.M.
chassis type Desktop
chassis serial INVALID
DMI Processor
manufacturer Intel
model Intel(R) Core(TM) i7-2600 CPU @ 3.40GHz
clock speed 3400.0 MHz
FSB speed 100.0 MHz
multiplier 34.0x
DMI Port Connector
designation J1A1 (internal)
designation PS2Mouse (external)
port type Mouse Port
connector PS/2
DMI Port Connector
designation J1A1 (internal)
designation Keyboard (external)
port type Keyboard Port
connector PS/2
DMI Port Connector
designation J2A1 (internal)
designation TV Out (external)
connector Mini Centronics Type-14
DMI Port Connector
designation J2A2A (internal)
designation COM A (external)
port type Serial Port 16550A
connector DB-9 male
DMI Port Connector
designation J2A2B (internal)
designation Video (external)
port type Video Port
connector DB-15 female
DMI Port Connector
designation J3A1 (internal)
designation USB1 (external)
port type USB
connector Access Bus (USB)
DMI Port Connector
designation J3A1 (internal)
designation USB2 (external)
port type USB
connector Access Bus (USB)
DMI Port Connector
designation J3A1 (internal)
designation USB3 (external)
port type USB
connector Access Bus (USB)
DMI Port Connector
designation J9A1 - TPM HDR (internal)
DMI Port Connector
designation J9C1 - PCIE DOCKING CONN (internal)
DMI Port Connector
designation J2B3 - CPU FAN (internal)
DMI Port Connector
designation J6C2 - EXT HDMI (internal)
DMI Port Connector
designation J3C1 - GMCH FAN (internal)
DMI Port Connector
designation J1D1 - ITP (internal)
DMI Port Connector
designation J9E2 - MDC INTPSR (internal)
DMI Port Connector
designation J9E4 - MDC INTPSR (internal)
DMI Port Connector
designation J9E3 - LPC HOT DOCKING (internal)
DMI Port Connector
designation J9E1 - SCAN MATRIX (internal)
DMI Port Connector
designation J9G1 - LPC SIDE BAND (internal)
DMI Port Connector
designation J8F1 - UNIFIED (internal)
DMI Port Connector
designation J6F1 - LVDS (internal)
DMI Port Connector
designation J2F1 - LAI FAN (internal)
DMI Port Connector
designation J2G1 - GFX VID (internal)
DMI Port Connector
designation J1G6 - AC JACK (internal)
DMI Extension Slot
designation J6B2
type A5
populated yes
DMI Extension Slot
designation J6B1
type A5
populated no
DMI Extension Slot
designation J6D1
type A5
populated no
DMI Extension Slot
designation J7B1
type A5
populated no
DMI Extension Slot
designation J8B4
type A5
populated no
DMI OEM Strings
string[0] DK20A
DMI Physical Memory Array
location Motherboard
usage System Memory
correction None
max capacity 32768 MBytes
max# of devices 4
DMI Memory Device
designation A1_DIMM0
format DIMM
type unknown
total width 64 bits
data width 64 bits
size 4096 MBytes
DMI Memory Device
designation A1_DIMM1
format DIMM
type unknown
total width 64 bits
data width 64 bits
size 4096 MBytes
DMI Memory Device
designation A1_DIMM2
format DIMM
type unknown
total width 64 bits
data width 64 bits
DMI Memory Device
designation A1_DIMM3
format DIMM
type unknown
total width 64 bits
data width 64 bits
size 4096 MByteshey skimore,
i would suggest to cross reference with your current setup with this >>
http://www.lenovo.com/psref/pdf/icbook.pdf
WW Social Media
Important Note: If you need help, post your question in the forum, and include your system type, model number and OS. Do not post your serial number.
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
Follow @LenovoForums on Twitter!
Have you checked out the Community Knowledgebase yet?!
How to send a private message? --> Check out this article.
Maybe you are looking for
-
Creation of Client number (Mandt)
I have looked into a max of documentation, and so far I did not find a answer which satisfy me. The question is : <u><i>what are the different criteria which drive/lead the decision to create several clients in Production ?</i></u> (instead of one).
-
Utl_http package from our custom pl/sql package.
We have a requirement to invoke a thrid party Url that uses HTTPS. For this we are using the call to utl_http package from our custom pl/sql package. When we invoke the custom package form Oracle Forms it works fine. But when we try to invoke the sam
-
Mouse pointer disappearing when recording audio?
I'm having trouble recording audio in presenter -- when I get started recording, after the first slide the mouse pointer seems to disappear onscreen. I can't do anything except clicking escape which brings up the save window and I can use my keyboard
-
Viewing recordings in another room
I have my BT Vision setup in my TV room. Is it possible to somehow Play back recordings on the Vision box on a TV located in another room?
-
PL/SQL stored procedure?
Hi, Is any body could help me to execute an PL/SQL stored procedure via JDev3.1 (using Oracle conection, No JDBC). Please provide sample code if possible? Thanks in Advance. Reza