CS4 Resample Image Check Box - Turning Off

CS4 > Image > Image Size > Resample Image checkbox
Is there a way to alter the program preferences to always show that box as unchecked? I went to Edit > Preferences and could not find a method.

Simply load an image,bring up the Image Size dialog box,uncheck the Resample Image box,and click OK. It should stay that way.

Similar Messages

  • I have found that my iphone 5 becomes very hot. What can I check or turn off to cool it down?

    I have found that my iphone 5 becomes very hot. What can I check or turn off to cool it down?

    Put the device down occasionally.
    Cut back on game playing.
    Kill any apps running in the background.
    Basic troubleshooting from the Users Guide is reset, restart, restore. Try each of these in order until the issue is resolved.

  • Is there a way to auto check a check box triggered off the completion of a specific text box?

    I am using Conga Composer. I'm hoping when information is filled into a specific text box in a pdf, it will auto check a specific checkbox.  Any script ideas? Or if this is even possible? I've seen scenarios for the reverse, but my situation requires this particular flow.

    I highly doubt this process is going to trigger any of these scripts, if that's what you're planning...
    What you can do add a doc-level script that will execute when the file is opened and set the check-box based on the text field's value, in addition to the custom keystroke code. That would look something like this:
    this.getField("CheckBox").checkThisBox(0, this.getField("TextBox").value!="");

  • BT Vision Box turns off constantly to reboot. Up t...

    For the last month or more, my BT vision box constantly switches off - Blue Screen, then reboots, taking up to 5 minutes at a time.
    It's impossible to record anything, watching things is annoying as you keep missing scenes while waiting for the reboot, you can't pause anything as it switches off.
    I have called numerous times, and have been given the instructions to restore to factory settings. "It will be the same as having a new box"
    I lost all my recordings (which my 3 year old was gutted as it was all his peppa pigs!!)...and it was worse than ever.
    Yesterday it switched off over 20 times !!
    I have phoned and emailed and not getting a decent response.
    I was given £12.50 as a good will gesture last month, but I would be entitled to that as I didn't receive the service I am paying for. I would happily give that £12.50 back just to have my BT vision working.
    I am told they are updating software, so surely if this is a problem they know about and were aware of, all customers affected should have been prewarned and compensated accordingly !
    Has anyone else had the same problem?
    Thanks

    In February I was persuaded to upgrade to BT Infinity over the phone when they agreed that part of the deal would be to move my phone line 6', i.e. entering the house from the living-room instead of the hall. It took 3 visits from 3 different engineer to get the message across that I was not switching to BT Infinity if they could not move the phone (needed the 2 power sockets). The BT Vision upgrade happened on a Monday during the day I assume and then kept happening for the rest of the evening. There was no information as to whether this was to be expected so I just left it to is own devices. The next moring the third engineer arrived and installed my BT Infinity hub. When I reinstalled my Powerline adaptors they did not 'connect' so I had no Broadband to the vision box but the BT Vision carried on 'upgrading' has been doing so intermittently ever since. I have ignored it for a week while I tried to sort out my Powerline adaptors and today I finally managed that. I was hoping that would solve the issue of the endless upgrading but it hasn't. It has 'upgraded' twice while I've been typing this! I have had no information about this problem, I thought I was alone until I read your post and as you say, if this has been happening to a lot of BT customers - why haven't they told us about it? I'm going to try some of the things suggested and reboot my Vision box and will let you know how I get on. Is there anyone out there who has actually managed to watch TV?

  • Illustrator CS4 switches on, then quickly turns off - help

    For the past few days I have have been experiencing problems with my product. As soon as I turn it on, it doesn't even make it to the opening dialog box (the one where it says New or Open etc). It briefly shows the box (blank) and the interface with all the tools etc behind it, but then it shuts down. Can anyone tell why this is happening?

    Hussnain,
    You may try to follow the explanations/suggestions in Move the folder or Other options (two of the hints on the web page linked to here).

  • How do I turn off the "scaling" feature in images?

    I'm on Photoshop CS4.  With the older version, I was able to select Image > Image Size, and then edit the size and resolution without any problem.  If I chose a width of 4-inches, for example, it would automatically set the height to maintain that proportion.  I would save the file, and then import into my layout program with that sizing intact.
    For some reason, something has changed and I dont' know why.  Now when I go to that menu, if I adjust the resolution and set the size that I want, when I import the file into my layout program (QuarkXpress), the image is HUGE....the same size it was originally.  It's as if the sizing that I chose did not stick and is only recognized within Photoshop.  In the file description bar within Photoshop (the one where you can click the X to close the file), it says that it is being "scaled."  How do I turn that off?  What is the problem?  I didn't have this problem until today and I can't figure out what I accidentally did.
    Thanks!

    Look at the Resample Image check box!

  • How do I turn off "image auto-resizing"?

    After upgrading to version 3.6.3, the browser is now auto-scaling my images. I turned off "auto-resizing" on the About:Config page (in other words, setting that parameter to "false") but Firefox is still auto-scaling my images. How can I prevent this?
    == This happened ==
    Every time Firefox opened
    == I upgraded to version 3.6.3

    If you have set the pref '''browser.enable_automatic_image_resizing''' to ''false'' on the '''about:config''' page then Firefox shouldn't resize images.
    Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
    See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]]
    Reset the page zoom on pages that cause problems: '''View > Zoom > Reset''' (Ctrl+0 (zero); Cmd+0 on Mac)
    See [[Text Zoom]] and [[Page Zoom]] and http://kb.mozillazine.org/Zoom_text_of_web_pages
    .

  • Canon 8800F Scanner--How to turn off Image Capture???

    Hi
    I have a Canon 8800F flatbed scanner, I have the latest drivers and latest copy of MP Navigator EX.
    1) The buttons on the front of the scanner don't work.
    2) If Image Capture is open, then MP Navigator EX scanning doesn't work.
    Is there a way to stop Image Capture from trying to use the scanner?
    thanks

    Dave1234567890 wrote:
    1) I tried changing the Scanner Buttons in Image Capture to "MP Navigator EX 1.0 Opener"--that didn't do anything (upon pressing a button, I could tell something launched on my computer, but it didn't open/redirect-to MP Navigator).
    You don't select MP Opener in the menu. You just need this software installed to assist with getting the buttons to function correctly. MP Navigator needs to be selected in the Scan Button menu.
    2) I can get the buttons on the scanner to work if I do the following
    a) set Scanner Buttons to "MP Navigator EX" (not the Opener)
    b) make sure Image Capture is turned off
    c) MP Navigator must be shut down before each button press
    d) Click on "Close Main Menu after Scanning with Scanner Buttons on the Scanner" inside MP
    Okay, a is true. This is what I said to select in my previous reply.
    Regarding b, I find that when using the buttons on my LiDE 200, I don't have an issue if Image Capture is open, but then this application should not be open unless it is opened by you or a setting in the scanner settings.
    Regarding c, I don't have to close MP Navigator for each scan. I can leave the application open and keep adding more documents using the Scan button on the scanner.
    As for d, is this a Preference setting you are seeing in MP Navigator? I don't seem to have this setting...
    3) There is no way to change the setting in Image Capture to ignore the scanner.
    Considering that Image Capture is the default scanning application for 10.6, then it is not an easy task to ignore the scanner. But, if the application is not open, then it will ignore the scanner when you open MP Navigator or use the Scan button, providing you have the Scan Button set to open MP Navigator rather than Image Capture.
    Because of (2) above, you can't do multiple sheet PDFs via the buttons, you have to use the on-screen software to add pages and finish the doc.
    Like I said already, the button is working fine for me to add more than one page into MP Navigator. Maybe the setting you mention at d) is causing your symptom?
    Pahu

  • Remote Powers Off X1 Box When TV is Turned Off

    I installed the X1 box using the self-installation kit two days ago. When I turn the TV off, the X1 box turns off. I have tried to power the box back on pressing the power button and it won't turn on. It will only power back on of I turn the TV back on. I never had this issue with my previous box. I was able to turn the TV off and have the box still powered on.
    And each time I turn off the TV, when I turn it back on, the X1 Box reboots and takes about 3-5 minutes for the cable to work.
    This is so frustrating! I've tried troubleshooting, reading all kinds of things online. I have reprogrammed the remote, tried to power down my TV with just the TV manufacturing remote, and that still turns the box off. I have no idea why it's doing this.
    I can't DVR anything unless my TV is on. If I'm not home, my DVR won't record anything because the box is off.
    I've looked on the X1 tips and tricks and nothing has helped to resolve this issue. Any help would be appreciated.

    Lindsj42 wrote:
    I installed the X1 box using the self-installation kit two days ago. When I turn the TV off, the X1 box turns off. I have tried to power the box back on pressing the power button and it won't turn on. It will only power back on of I turn the TV back on. I never had this issue with my previous box. I was able to turn the TV off and have the box still powered on.
    And each time I turn off the TV, when I turn it back on, the X1 Box reboots and takes about 3-5 minutes for the cable to work.
    This is so frustrating! I've tried troubleshooting, reading all kinds of things online. I have reprogrammed the remote, tried to power down my TV with just the TV manufacturing remote, and that still turns the box off. I have no idea why it's doing this.
    I can't DVR anything unless my TV is on. If I'm not home, my DVR won't record anything because the box is off.
    I've looked on the X1 tips and tricks and nothing has helped to resolve this issue. Any help would be appreciated.
    Do you have one of those smart power strips? If so, is your TV connected to the "Control" outlet and the X1 STB plugged into one of the automatically switched outlets? I have one of these and my PC is in my Control outlet, so when my PC goes off, so does my Ceton device, my speaker system, and my monitor. Reason I'm asking is if you have your TV plugged into the control, and the X1 plugged into a switched outlet, turning off your TV would also switch off the X1 box. Here's an example picture of one of these - 
    If not....then just ignore this piece

  • IMac turns off as if it short-circuits?

    I've only noticed this happening when I'm using Photoshop CS5...
    I have an iMac 27" with:
    Intel Core i5
    2.8 GHz
    16GB Memory
    (Mod identifier: iMac11,3)
    WHEN I USE PHOTOSHOP, and I use the free transform tool to enlarge (only when I enlarge) an image, the computer turns off completely, instantly without any warning. Just straight to 'OFF' mode. I have to start it again with the power button. No reports of unusual behaviour come up on the screen, it just shuts off as if there has been a power cut. Nothing else shuts off from the power supply, just the iMac so I know the problem is definitely internal (within the iMac).
    I'm really struggling with this problem.

    Hi Miriam, thanks for the reply!
    I'm afraid I'm not too tech-savvy, so I wouldn't know how to check my space on the drive. But this has happened since I got the computer (1 year ago), so I doubt it. Here is what the 'Console' said - make any sense to you?
    09/02/2012 17:39:30
    [0x0-0x24024].com.adobe.Photoshop[423]
    ScriptUI: 1[0]: 1.079681 (FlexServer performance info) 0.100 seconds to load /Applications/Adobe Photoshop CS5/Plug-ins/Extensions/ScriptingSupport.plugin/Contents/Resources
    09/02/2012 17:39:30
    [0x0-0x24024].com.adobe.Photoshop[423]
    ScriptUI: 3[0]: 1.268042 (FlexServer performance info) 0.200 seconds for server SWF to initialize
    09/02/2012 17:39:30
    [0x0-0x24024].com.adobe.Photoshop[423]
    ScriptUI: 6[0]: 1.378813 (FlexServer performance info) 0.100 seconds to load /Applications/Adobe%20Photoshop%20CS5/Plug-ins/Extensions/ScriptingSupport.plug in/Contents/Resources/ScriptUIFlexPhotoshop.swf
    09/02/2012 17:43:00
    [0x0-0x19019].com.adobe.Photoshop[384]
    ScriptUI: 1[0]: 1.106904 (FlexServer performance info) 0.100 seconds to load /Applications/Adobe Photoshop CS5/Plug-ins/Extensions/ScriptingSupport.plugin/Contents/Resources
    09/02/2012 17:43:00
    [0x0-0x19019].com.adobe.Photoshop[384]
    ScriptUI: 3[0]: 1.297074 (FlexServer performance info) 0.200 seconds for server SWF to initialize
    09/02/2012 17:43:00
    [0x0-0x19019].com.adobe.Photoshop[384]
    ScriptUI: 6[0]: 1.465855 (FlexServer performance info) 0.200 seconds to load /Applications/Adobe%20Photoshop%20CS5/Plug-ins/Extensions/ScriptingSupport.plug in/Contents/Resources/ScriptUIFlexPhotoshop.swf
    09/02/2012 18:05:11
    [0x0-0x2c02c].com.adobe.Photoshop[438]
    ScriptUI: 1[0]: 0.988964 (FlexServer performance info) 0.100 seconds to load /Applications/Adobe Photoshop CS5/Plug-ins/Extensions/ScriptingSupport.plugin/Contents/Resources
    09/02/2012 18:05:11
    [0x0-0x2c02c].com.adobe.Photoshop[438]
    ScriptUI: 3[0]: 1.186136 (FlexServer performance info) 0.200 seconds for server SWF to initialize
    09/02/2012 18:05:12
    [0x0-0x2c02c].com.adobe.Photoshop[438]
    ScriptUI: 6[0]: 1.354150 (FlexServer performance info) 0.150 seconds to load /Applications/Adobe%20Photoshop%20CS5/Plug-ins/Extensions/ScriptingSupport.plug in/Contents/Resources/ScriptUIFlexPhotoshop.swf

  • Tv losing channels when vision box turned on

    When vision box is turned on I lose channels - film4 and radio channels and screen pixelates on others. Not actually watching channels through box, just on tv. Screen says no signal. As soon as box turned off signal returns. When scanning for channels vision box cannot find these channels. Any help gratefully received.

    This is nearly always HDMI interference. I get this on 666MHz which for me is Pick TV and a few others.
    Basically the HDMI interface generates Radio Freqency interference - it is a by-product of the high bandwidth required to send the full HD signal from the box to whatever. This RFI then leaks out of the cable (even the expensive 'shielded' ones) and will often cause 'damage' to the signal being received down your el-cheapo TV aerial cable into the TV tuner. It will peak at certain frequencies and this is why not every channel is affected.
    I have found the only way to (partially) cure the issue with my setup is to install clip-on ferrite cores (the bug ones) onto every HDMI cable and wind the cable at least once through the centre of the ferrite. I say only partially cure as if the signal level of the MUX on 666MHz drops OR there is other noise, then the HDMI interference will knock out that MUX.
    Another fix is to ensure that your HDMI cables are kept as far away from your TV aerial connection(s) and any amplifiers as is possible, even if it means using a longer cable with a less direct route from box to TV. Don't bunch or wrap all the cables together, and don't be fooled into paying a kings ransom for HDMI cables. Many have found the cheaper cables generate less RFI for some reason.

  • HT4901 trying to turn off calendars in Icloud

    I am attempting to backup my 4S to Icloud and continually fail since updating to ios6. I am now trying to turn off Calendars in Icloud with no success. I check to turn off Calendars and it begins to run but never succeeds and eventually fails with out turning off the Calendars. Any Suggestions?

    Can you be more specific?  The iCloud "backup menu" is in Settings>iCloud>Storage & Backup>Manage Storage, then tap the name of your device under "Backups".  You won't see "Calendar" listed under Backup Options because the calendar is not part of the iCloud backup. 
    So where, exactly, are you trying to turn off Calendars (in what menu)?

  • VBScript to turn off Backup schedule

    We have a third party application that backs up our user data, but the last guy who created our images forgot to turn off the scheduled backup. We have hundreds of machines that need to have the "turn off schedule" selected. I can't find a vbscript
    that will do that. I need to be able to run the script via psexec on all of the machines. I need some help on where the "turn off schedule" writes to the registry. Anyone know?
    Thanks
      

    Hi,
    I'm not very clear on exactly what you're asking, but you can use this tool if you're trying to figure out what registry changes you need to make:
    http://sourceforge.net/projects/regshot/
    Group Policy can then be used to enforce registry changes on the clients.
    Don't retire TechNet! -
    (Don't give up yet - 12,950+ strong and growing)

  • How to Turn Off the Smart measurements box off in CS4 MAC

    We just switched to CS4 at the office and I found a new anoying feature to me. When I resize or move a box in the page, a black box with measurement appears near my cursor. I truned off the "smart guide" in view and I un-checked all the smart guide option. Please tell me how to took that off please!

    I agree with Sandee that the transformation values are a great feature, and I wouldn't think of turning it off. It's not accessible from the contextual menu, only from preferences.
    Robert, holding down the Control key on the Mac (after you start moving an object), disables the display of smart guides, but not of transformation values. The only way to turn off transformation values is to turn off the preferences Sandee mentions in post #1.

  • Check boxes that turn layers on and off

    hay all
    im fairly new to this part of adobe but i have a good understanding
    what i need i to be able to have check boxes that turn layers on and off when the tick is shown and when it is not
    i know this is possible through scripting but i dont have the ability as of yet to carry out the scripting
    is someone able to write a basic script for me or help me to understand what i need
    i want the script to be for when a check box is clicked (mouse up) that a layer that was oringaly turned off to be turned on (electricalplan)
    once the tick is removed i need the layer to turn off again
    i need to do this for mulitple layers (about 10)
    so i would just use the same script for each replacing the name with the correct name.
    i also need the check boxes to work together so that i can have multiple turned on at the one time (electricalplan) (sewerplan) (waterplan)

    Do you know how to access fields with JavaScript? I access the script way of the check box properties and selecting the actions tab.
    Do you know how to set the optional value for a check box? Yes    
    Can more than one layer be displayed at a time? Yes
    Do you want to toggle the OCG by name or element number in the OCG array? I would like to toggle by name

Maybe you are looking for