CS4 Select---- Modify behavior changed/broken?

Hi,
In previous versions, I could Select--->All, then Select--->Modify--->Contract, which is very useful for creating frames, vignettes, etc. In CS4, after Select--->All, all of the Modify options are ghosted out (inactive) except Border, which is not at all the same as Contract.
Can anyone comment on this?
Thanks,
Neil

J & Josh,
Thanks for the great techniques, guys I do appreciate it. Here are the steps I've been using, which are, I believe, actionable, but since I can do it in 30 or 40 seconds, I haven't bothered. Just lazy, I guess. Bear in mind, I don't generally batch process, and every "frame" is a little different, so I haven't canned this. This is a technique that I just concocted by necessity over the last year or so of processing photos. The bat is just one of a thousand variations/examples. So for that particular frame, if memory serves...
SHIFT-CTRL-N
CTRL-A
CTRL-ALT-[ (my shortcut for Contract Selection)
50 [ENTER]
SHIFT-CTRL-I
CTRL-ALT-D
1 [ENTER]
Choose Bucket Fill & pick a color & fill
CTRL-A
CTRL-ALT-[
30 [ENTER]
SHIFT-CTRL-I
CTRL-ALT-[
10
CTRL-ALT-D
1 [ENTER]
Choose Bucket Fill & pick a color & fill
(It looks longer on paper than it is, believe me.)
So if I were to create an action, I'd have 7 "input" variables I could play with. But without the action, I can also add or subtract steps to increase/decrease the complexity of the frame. I know you guys might disagree, but for me this is fast, and gives me a lot of control over the process, and an infinite variety of "one of a kind" frames I can season to taste. But the methods you propose are also excellent. Thanks. I still hope that Adobe will find it in their hearts to put this back the way it was...

Similar Messages

  • While using my iPhone the system behavior changed where I now have to click on the app to select it, then double click to launch it. Same goes for entering in my password to access the phone and entering digits to make a phone. I am also having trouble

    While using my iPhone the system behavior changed where I now have to click on the app to select it, then double click to launch it. Same goes for entering in my password to access the phone and entering digits to make a phone. I am also having trouble swiping the screen to move to the next page. This is no longer working. I did not change any settings, the phone just started behaving this way. Any ideas on how to revert back to the single click selection/launch? Any assistant is greatly appreciated. Thank you!

    Edge has very clear restrictions, one being that you must have 6 months of clean payment history which you don't. Either wait until April 14, or good luck at Sprint.
    I am unsure how it can be determined the payment mix up was the fault of CS, but regardless, the mix up was done. There can be any number of reasons why a payment could be missed without any fault on your part, however you are still the responsible party for the account and must live with the repercussions.

  • Changed (broken) behavior with application.idleTimerDisabled

    In version 2.1 of the iPhone SDK, application.idleTimerDisabled would disable auto lock for the application, even when phone calls, text messages and calendar events occurred. However, in 2.2.1, the behavior changed and text messages and calendar events now cause the phone to auto-lock. This has broken my application making it unusable since it relies on the application being run continuously without shutting down.

    BTW, this will break any application that uses idleTimerDisabled since receiving a txt msg or calendar even will sleep the app. This includes those apps like alarm clocks, clocks, security apps, etc. I would have expected more interest in this topic.

  • "Modified date" changing on messages for what seems to be no reason. Very strange.

    I have been working on an autoarchive issue with Outlook 2010 for a few days.  I found out that by selecting a message and pressing ALT+Enter you can see the modified date, sent and received dates, etc for the message.  I know if you move a message
    or reply to a message it will change the "modified date" for that message. 
    However, what is happening to me is when I look at a message it updates the "modified date".  This is crazy!  I didn't know that looking at a message changed the modified date.  If this is the case how are you supposed to check the modified
    date because when you check it it changes it to the current date and time.  Again, crazy.  Can someone shed some light on this for me?   thanks

    Hi,
    You mean that when you view the message, the modified date change to the
    current date and time? Based on my research, Editing, replying, or copying an Outlook item can change the last modified date.
    So as this issue, start Outlook in safe mode to check the issue:
    http://office.microsoft.com/en-us/excel-help/work-with-office-safe-modes-HP010354300.aspx
    If the issue still occur in safe mode, then run Windows in clean boot mode - this will exclude 3rd-party services when starting Windows - for a period of time, and check if this behavior will
    still occur.
    http://support.microsoft.com/kb/929135
    Jaynet Zhang
    TechNet Subscriber Support
    If you are
    TechNet Subscription user and have any feedback on our support quality, please send your feedback
    here.

  • Select Modify Contract Grayed Out

    Mac OSX 10.7
    PS CS5
    Okay, I know this has been posted before and I've read 4 or 5 threads with no resolve for me. The problem is that after using my select all, or using the marquee tool (tried both ways) to draw the selection my contract option is still grayed out it (like most everyone else has said). Only difference is, it was WORKING fine 30 min ago, I've used it many times while working on numerous documents and now all of the sudden it wont work on anything. I havn't made any changes to any prefs, but maybe I hit a hotkey and locked something? I remember when my define pattern was grayed out, I read a post where I clicked one simple option and voila it was back to normal...something with a spacebar shortcut I think? Too long ago to remember, anyways I was hoping there might be an option for this. I know the work arounds and use them from time to time, but I really would like for shortcut to be normal again
    Michael

    In CS5, if you chose Select > Select All or had the selection touching the border, the Select > Modify Commands were unavailable.
    This issue is solved with today's (10/6/14) release of Photoshop CC 2014 contains a "Apply Effect at Canvas Bounds" option for the follow features:
    Select > Modify > Smooth...
    Select > Modify > Expand...
    Select > Modify > Contract...
    Select > Modify > Feather...
    Users now have the option to have these commands apply to an entire selection or just the portion of the selection that is not touching the canvas bounds with the "Apply effect at canvas bounds" checkbox.
    The checkbox option is remembered for each, individual selection modification option. The checkbox default is "off" on first launch and with preferences deleted.
    With the "Apply effect at canvas bounds" checkbox ON, the behavior is equivalent to Photoshop CS3 behavior.
    Thank you for your feedback!
    Meredith

  • In CC, why can I no longer use Select/Modify/Contract after Selecting all?

    I've been using CS3 and am now on CC.
    I tried using the Border option then Inverse, but this is a poor substitute.
    Any solutions or alternative suggestions?
    Many thanks.

    This issue is solved with today's (10/6/14) release of Photoshop CC 2014 contains a "Apply Effect at Canvas Bounds" option for the follow features:
    Select > Modify > Smooth...
    Select > Modify > Expand...
    Select > Modify > Contract...
    Select > Modify > Feather...
    Users now have the option to have these commands apply to an entire selection or just the portion of the selection that is not touching the canvas bounds with the "Apply effect at canvas bounds" checkbox.
    The checkbox option is remembered for each, individual selection modification option. The checkbox default is "off" on first launch and with preferences deleted.
    With the "Apply effect at canvas bounds" checkbox ON, the behavior is equivalent to Photoshop CS3 behavior.
    Thank you for your feedback!
    Meredith

  • Select Modify Expand is rounding my corners out of nowhere.

    I was working on something the other day that may or may not have something to do with this where I was going to Select>Modify>Feather.
    Whenever I try to make any type of selection, be it Ctrl+clicking the thumbnail, rectangular marquee tool, or pen tool, It has rounded edges for no reason. I have no feathering on, I have no anti-aliasing on. I tried going to Select>Modify>Feather and changing it to 0 but, it won't let me go below 0.1 and even still, that shouldn't be affecting my selections unless I choose it for each individual selection right? It's just frivolously rounding my edges. I tried deleting my preferences file and that didn't help either. I'm on Photoshop CC btw. The corners seem to be fine until I Select>Modify>Expand. I can't tell if the feather's just so low that you can't tell before the expand or if it's the expand causing the edges to round off. I have been using this method for months now and Expand has never rounded my edges until today.

    I know that there's alternatives but, what I want to know is why I have never gotten rounded corners from expand until today when everyone is telling me that getting rounded corners from expand is actually how it's supposed to work. I know for sure that all the feathering options are at 0 but, it's not feathering, it's just rounding and, I know for sure that I was using Select>Modify>Expand to increase the size of specific shapes, most recently for layer masks. I can't think of anything I could have hit that would have caused it to just change out of the blue like this.

  • Select Modify Border always feathers

    Hi All,
    Apologies if this has already been discussed somewhere previously, but I'm getting very frustrated that I can't seem to easily accomplish what should be a very simple task:
    I am using CTRL+A to "Select All" and then trying to contract the selection by X pixels. Apparently my only option after a Select All command is to use the "Border" command, but this always seems to feather the selection, no matter what I do. I know there are some "workarounds" to get the selection I want, but seriously, this is so dead simple of a task I'm going bonkers here.
    Is it just me or did this used to be a lot easier in earlier versions of PS? Seems to me that in CS5 Adobe is trying to get "fancy" with their UI and making things a lot harder than they need to be.
    Could someone from Adobe let me/us know why the UI is making it impossible for me to do a simple Select > Modify > Contract command (following a Select All)? I distinctly remember being able to do this without hassle in every other version of PS I've ever worked with.
    Your in Frustration,
    Funkmasta

    Howdy.
    Is it just me or did this used to be a lot easier in earlier versions of PS?
    It's not just you. It's pretty easy in CS3.
    The screenshot is after Ctrl+A has been applied. The Contract command is still active. And the selection will not be feathered.
    According to MTSTUNER's link (thank you), CS3 is the only version that will do this. Sometimes it's good to be behind the curve.
    Maybe the referenced script will fix you up. I don't know anything about scripts, but I do know a little about actions. So out of curiousity, I hacked together an action which should work in CS5. It's based on expanding the canvas, contracting the selection, then cropping back to the original size. It looks like a long way to go to accomplish something so simple, but Ps does it all in the blink of an eye.
    1. Merge Visible (Ctl+Alt+Shft).  This creates a proxy for the original image size after the canvas is enlarged. This layer will be deleted at the end of the action.
    2. Canvas Size. I set it to 105% in both axis. The percentage doesn't matter, as long as it's more than 100. The point it to get the canvas border away from the proxy border.
    3. Set Selection. Ctl +Click on the thumbnail on the proxy layer. This will select the perimeter of the proxy layer, which is the same as the original canvas.
    4. Contract. Menu>Select>Modify>Contract. Enter the number of pixels. This can be changed later. As you can see in the screen shot above, I have made this a conditional action. It will stop here for you to approve or change the settings. When you hit enter, the action continues.
    5. Layer Via Copy. This layer preserves the contracted selection. It's really being used as a channel. This layer will also be deleted at the end of the action.
    6. Set Selection. Ctl+Click on the thumbnail for the Merge Visible layer from step 1.
    7. Crop. Menu>Image>Crop. The image is now the original size.
    8. Set Selection. Ctl+Click on the layer thumbnail created in step 5. You should now be looking at the contracted selection. We're done, except for a little housecleaning below.
    9. Delete. Delete the top layer, which should be the contracted channel. (This doesn't affect the selection.)
    10. Delete. Delete the top layer, which should be the Stamp Visible layer. Now we're back where we started, but we have a contracted selection.
    Stop Recording.
    It may look ridiculous on paper, but it works like a charm, so far as I've tested it. And the beauty of actions is you only have to make them once. No matter how much trouble they are.
    Once the action is made, it's quick and easy to use. Just click on the action button.
    The contract pixel dialog box appears.
    OK or change and OK, and you're done. The selection appears at the desired location, and is not feathered. In practice, the only downside is you get a few extra history states.
    You get where you're going, and you get there quick. So quick no one will notice you got there via Paris, London, and El Paso.
    I'm not 100% sure this will work in CS5, as I've never laid eyes on it, but the issue seems to be that when the selection touches the canvas border, Contract Selection is not available. Nowhere in the action does a selection touch the canvas border, so it should work the same as it does in my CS3. If you're interested in testing it, I can send you the Droplet, or you can create it from scratch using the instructions above.
    Anyway, that's all I got, and it could all be wrong.
    Peace,
    Lee

  • Select Modify Contract

    No matter what I do, I cannot seem to get Select > Modify > Contract to work. I am trying to contract a gradient fill. I have searched on google and fund several people experiencing similar problems. The contract option remains greyed out. Am I doing soemthing wrong or is it a problem with Photoshop?

    Adobe changed the way Select - Modify works.
    In older versions of Photoshop, you could Select-All, then Select-Modify-Contract.  This would give you a selection of nearly all the image, with some pixels around the edge not selected.
    Adobe eliminated that possibility at the same time Select - Modify - Border was introduced.
    The good news is that you can get there from here by doing something like this:
    1.  Select - All.
    2.  Select - Modify - Border, choose twice the number of pixels you would have used for Contract.
    3.  Select - Inverse.
    I used to use Select-All then Select-Modify-Contract all the time.  I don't know why they changed it, but doubtless someone thought they had a good reason.
    -Noel

  • ABAP QUERY: Selection text name change : seq. of column sequence in output

    hi friends,
    1)I need to change the text of the selection field in ABAP QUERY REPORT
    please help me. t code: SQ03 : User Group(zabc) and report name (zabc).
    Environment -> infosets.
    in the field group, double click field name to be changed. I tried to change it. The changed name is only reflecting in the list output, but not in the selection screen.
    I want the text to be changed even in selection screen.
    2)I want to change the position of the column ie end(last colum) to 8th column in the report output. Please help me.
    Environment -> Queries -. I tried with 'Output sequence' and given no as '8'. But is not reflected and the column is still displayed at last column.
    Please help me

    Go to Query and go to selection field and change the selection text.
    Hope this help.

  • "Date Modified" info changes even if file is not saved (MS Office 2008)

    I recently upgraded from Office for Mac 2004 to the 2008 version (v12.2.4). Since upgrading, I've encountered the following issue that is a huge problem. Me and several people in my office need to access Word .doc files on our network. These files are all organized in folders, and within those folders, the files are organized and sorted by the Modified Date (most recent at the top). Now...if you open an old .doc file for whatever reason and then close it (WITHOUT saving), the Modified Date will change to the current date and time. In Office 2004, the Modified Date remained unchanged until you click Save. This happens with the autosave feature turned on or off, so that is not a factor. The Modified Date changes if you open a file and immediately close it or if you leave it open for several minutes before closing. This is a huge issue for our company, as the organization of our files is becoming more and more distorted as we access these .doc files many times per day. For what it's worth, this does not happen with .xls files, only Word files.
    I am not sure if this issue has ever been resolved. I've done some research and have found no solution. This is the only relevant thread I've found for this issue: http://discussions.apple.com/thread.jspa?threadID=1029626
    Any suggestions???
    Message was edited by: ebelp

    Suggest you post your question on Microsoft's forums, as Apple discussions only provide support for Apple produts:
    http://www.officeformac.com/productforums

  • Regular selection tool cannot change object size

    I am using CS6.  When you create a simple square or any object, you will be able to use the regular selection tool to change the size by draggin on the "control point" around the object.
    However, I was able to do it before but I dun know why I can't do it suddenly.  The regular selection tool just enable me to move the image even I click on the "control point" on the object.  If I need to change the size, I need to use the resize tools which is a hassle.
    Anyone knows what happened?  Am I having some wrong setting in my AI ?

    View > Show Bounding Box

  • Open folder, date modified date changing

    I finally updated to OSX Lion and now when i access our Windows server 2012 server, as soon as i click to open a folder the date modified date changes to today. I am not opening any files just viewing the contents of the folder. This is causing a problem since we use the date modfied to sort customers jobs often.
    It started after I installed OSX Lion. Any ideas?

    I finally updated to OSX Lion and now when i access our Windows server 2012 server, as soon as i click to open a folder the date modified date changes to today. I am not opening any files just viewing the contents of the folder. This is causing a problem since we use the date modfied to sort customers jobs often.
    It started after I installed OSX Lion. Any ideas?

  • New window behavior change FF 29.0.1

    New window behavior changed with FF 29.0.1. I have a custom page that I built that has a bunch of links to sites/pages that I visit frequently. Every one of the links on that page begins with <a target="_blank" href=" >
    I typically keep this page maximized and until FF 29.0.1, when I clicked one of those links, it opened in a new maximized window. If I had the page restored instead of maximized, when I clicked one of those links it opened in a new restored window. In other words, the new window was opened in the same window state as the page from which I clicked the link. Now, when I click a link on a maximized window, it opens in restored view and I have to manually maximize it. It's a pain in the patoot.
    I'd like to know how to change FF to return to the previous behavior and also why someone felt it was necessary to change this behavior.
    ''edited the HTML coding that prevented this message from being completely displayed''

    You can check for problems caused by a corrupted localstore.rdf file.
    *http://kb.mozillazine.org/Corrupt_localstore.rdf

  • Selected item getting changed after paging in paged datagrid

    I have a paged datagrid. It contains two drop downs. Once i clicked for pageing, the previously selected item getting changed. Please give me solution to solve this problem.
    Thanks & Regards
    kvpdy

    I put the dropdown in item renderer and the selected item is based on the database value. How can we store that and reapply in paging ?
    Pls give me solution....

Maybe you are looking for

  • The copy/ paste function not working after OS 8 upgrade

    after OS 8 upgrade my iPad no longer works. It will not copy, then paste . The screen just starts scrolling up on its own. Very frustrating. Ipad Air worked perfectly prior to doing OS 8 install. This *****! Any ideas?

  • Switching from Final Cut Pro to Adobe Premiere

    Hi everyone, Hopefully there are others here who have made this switch and can offer me thoughts and advice. I have for the past few years used the Final Cut Pro suite as my video authoring media. It's done a great job editing and compressing my vide

  • Outputting check box input to text box

    I have another javascript question regarding Acrobat. I have an order form with 3 categories of check box sets. Set 1 a b c d Set 2 e f g h Set 3 i j Each checkbox outputs the SKU of an item which in this case is insignificant. Here are the scenarios

  • PortableRemoteObject.narrow() method

    Hi, I usually use this method in case of looking for some remote home interface. But recently I found some EJB examples, where an author ommited the PortableRemoteObject.narrow method. Actually the source code was generated by Lomboz. This unusual pr

  • K8N Neo + Hyper6 with 2 LED Fans is a match made in heaven!

    Here is the proof... Idle: http://members.iinet.net.au/~teknophyle/images/CoreCenter_Idle.png Load: http://members.iinet.net.au/~teknophyle/images/CoreCenter_Load.png Room temp. between 25C and 28C Coolermaster Hyper6 with 2 LED Fans ( 1 fan blows in