CS4 Some elements from Master not Printing?

This is a weird one.
I have a 42 page document with 1 Master Page assigned to all 42 pages. The Master Page has 5 elements in 5 layers. Pages 1-35 print perfectly but from page 36 on only prints 3 of the layers on the Master Page while printing everything else.
I have re-assigned the Master Pages to insure they are applied correctly. I have searched for any layers that might be obscuring the Master Page layers on those pages. I have even made invisible all layers but the missing layers, then print "ONLY VISIBLE LAYERS" and get a blank page?!
The pages are rendered correctly on the screen and all the elements are displayed but they do not print from page 36 on?
Any other troubleshooting suggestions?

Another thing to try, which might help if it's really a document problem:
Create a new blank doc the same page configuration as the original. Be sure the master pages have the same prefixes.
On the orignal master page select all and copy, then move to the master page of the new doc and paste in place (enable "Paste remembers layers" from thin Layers panel menu first) and your master should be reproduced with all layers.
Select all the pages in page panel of the orignal original, then from the panel menu choose "Move Pages..." and select the new document as the target. It will probably be easier to put them before page 1. After moving the pages, delete the original blank first page which should now be the last page. Save with a new name.
Peter

Similar Messages

Elements 11 will not print to my epson stylus r1800 printer after upgrading from windows 8 to 8.1

Elements 11 will not print to my Epson stylus r1800 printer after upgrading to windows 8.1 from windows 8

I cant access any printers, not even the virtual printers.
What I would do is use ProcMon to find out why that Event entry was written. Then I imagine I would get a clue about a .dll which might be involved, which hopefully might be registerable. Since IE9 there have been new .dll involving printing
which have not been reflected in any of our repair tools. However, instead of modifying our old scripts to reflect this fact, I have been advocating, so far unsuccessfully, that Microsoft create a proper IE Repair tool, one which does not rely on such
unreliable techniques. E.g. a better method of repairing would be to have it done by a proper troubleshooter (an .msdt file) but so far it seems nothing has been done in that way for these symptoms (again, assuming the cause is registry corruption
and not simple interference from now incompatible third-party programming--the fix for that would be to identify and remove the incompatibilities.) For example.
Robert Aldwinckle

Elements 11 will not print with Epson R2000?

Cannot make Elements 11 work with new Epson r2000 printer. Prompt on screen states it is not compatible or settings are not correct. Epson tech support worked on it, said to contact without success, said to contact Adobe. Printer works fine on all other applications. Help please.

Thanks again.
Richard
Date: Thu, 12 Sep 2013 08:49:39 -0700
From: [email protected]
To: [email protected]
Subject: Elements 11 will not print with Epson R2000?
    Re: Elements 11 will not print with Epson R2000?
    created by A.T. Romano in Premiere Elements - View the full discussion
Ollie37
Thanks for the follow up.
Barbara Brundage in the Photoshop Elements Forum will probably have the answer to your Photoshop Elements Epson scanner issue. Look into that Twain driver. She will give you good input on all this.
Also, see your other thread about Adobe telephone contact information. I have posted in that other thread also.
ATR
     Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5676121#5676121
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/5676121#5676121
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/5676121#5676121. In the Actions box on the right, click the Stop Email Notifications link.
     Start a new discussion in Premiere Elements by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

Photoshop elements 13 will not print to my new epson wf-7620 error message;default printer could not be opened

frustrated! photoshop elements 13 will not print to my new epson wf-7620 error message;default printer could not be opened

I haven't been able to try this fix, but someone emailed me the below fix:
I had same problem.Elements13 would not open my new default printer, but worked ok on four other versions of Elements. No help from Adobe, after three days of searching & phoning adobe , I found out by:- Going into Elements 13, Press Edit button, down to "Preferences and across to general. Press the "Reset Preferences on next launch". I then suggest you go through each section to make sure that your chosen preference are still ticked/checked in.
It worked for me. Hope same for you.
I'm planning on trying this fix soon. Let me know how it goes for you if you get to try it before me. Will do the same. Thanks,
Chad

Elements 9 will not print to my HP Photosmart Premium C410.

Elements 9 will not print to my new printer. When i try I get the "send a fax" page. PS sends the job to the print spool for the fax. When i select the printer in the print page it sometimes tell me it can't print until I install a printer. Only way to change that is to close PSE and then reopen but still no printing. Does anyone have any ideas?

xqzdust wrote:
I can't change the name in devices and printers. I can highlight it but that's all. Is there a trick I don't know of that allows you to change or alter the name?
Open Devices and Printers.
Right-click on the icon for the printer and select "Printer properties".
Click the "Change Properties" button on the lower left of the dialog.
Enter the Administrator's password when prompted.
On the "General" tab in the next dialog, you can change the name.
From that last dialog, you might want to click the "Preferences" button and see if you can change the default behaviour to print instead of fax.
Ken

Can't print from safari to hp 4620 appears to print but does not first to print from safari notes print no problem any suggestions?

Can't print from safari to hp 4620 appears to print but does not first time i have attempted to print from safari , notes print fine no problems. It is like on a desktop my print is sitting in the queue there are error messages only the usual print dialogue. I've turned the printer off and back on with no luck any suggestions?

That's very strange. See if clearing the cache in Safari will make it work. I'll include the steps below. If that doesn't help, install a different browser, such as Opera, to see if that will print from pages that Safari won't. If it will, then something is wrong with Safari. If it doesn't print, then the web pages might have printing blocked. There are sites that are doing that for copyright reasons. Let me know what you find.
To clear the cache on Safari:
Open Settings.
Select Safari
Touch Clear Cache.
Select Clear.
Touch Clear Cookies.
Select Clear.
Touch Clear History.
Select Clear.
I am a printer tech for HP.

I miss some pages from My Notes APP duaring backup

I miss some pages from my NOTES APP during backup

Hi laurenfrommotown!
I feel like the best option for you now will be to restore from any backups you may have in order to get that note back onto your iPhone. We have an article that talks about backups and how to restore from one, and it can be found right here:
iOS: How to back up and restore your content
http://support.apple.com/kb/ht1766
Keep in mind that if the note is stored on a sync server, such as Gmail or Yahoo!, it is likely to not be stored in the backup, and therefore, might not appear back onto your phone. Thanks for using the Apple Support Communities!
Cheers,
Braden

Some paragraph tags are not printing when document is printed from Framemaker 10.

So this is really odd. I have a situation where I have a document that I am developing in Framemaker 10 several different paragraph tags are intermittently not printing when the document is physically printed. When I go to print the document from Framemaker 10 to a physical piece of paper some tags are printing partially or not at all. What makes this stranger to me is that when I print the document to a PDF, all of the content and tags show up in the PDF. Then when I try to physically print from the PDF, the tags do no print from that document as well.
Typically the tags that are not printing are those that have been bolded, but are across several different tags. Also the problem is sometimes only to the first line of a tag, where if the tag carries over to a second line in the document, the text on the second line prints. Another quirky instance that shows up is where the text a line will print only parts of the text. The document uses the same type font for the entire document, Helvetica 55 Roman. The font size varies and the coloring varies as well, but this issue is happening for all sizes and colors.
I'm not sure what additional information is important here, but if you need additional information please request it and I will supply it to the best of my ability. I'm a content developer with an intermediate amount of experience with Framemaker.

I'm not sure if this is the same problem, and you didn't mention your
OS, but there was a widespread problem with dropped text in PDF with
Windows XP. A hotfix was issued to fix it. If on Windows XP, you should
install it:
http://blogs.adobe.com/techcomm/2008/07/hotfix_for_framemaker_1.html
Also, you mentioned that it was "bolded" text that tended to have the
problem. Bolded text is artificially bold and does not use actual bold
fonts. (If I recall, text is double printed at a slight offset to give
the appearance of a bold font.) So there is no bold font to embed. Be
sure you install and use an actual bold font, rather than using the
bolded characteristic, or you could see problems.
This is a stretch, but you also mentioned that some of the problem
sections have colored text. Check the printer properties of your Adobe
PDF virtual printer to make sure someone didn't reassign the driver (on
the Advanced tab). It should be set to use the Adobe PDF Converter
driver (or Acrobat Distiller in older Acrobat versions). Years ago,
people sometimes changed this setting to use other drivers for various
reasons, not realizing that they limited themselves to the capabilities
of that driver. So, if they chose an HP LaserJet PostScript driver, for
example, their documents might no longer be able to be 11"x17" or
color-- because the printer couldn't handle it. The driver was limited
to 8.5"x14" and black-and-white. Perhaps there is a driver set that is
choking on the colored text-- though I would think it would merely
convert it to B&W.
Okay, I've grasped at enough straws.

[CS5] Overriding elements from master of master

I have two masters, A-product and B-product 1. Master B-product 1 is based on A-product.
'myPage" based on B-product 1.
Overriding elements from B-product 1 to document page works, but I can't override elements from A-product master.
I can found element by this reference: myPage.appliedMaster.appliedMaster.allPageItems[n] but when I tried to override to myPage I had "Invalid object for this request" error. How can I do it?
Piotr

try:
var mi = myPage.masterPageItems;
for(var i=0;i<mi.length;i++){
mi[i].override(myPage);
Harbs

Photoshop Elements 11 Will not print?

Photo shop Elements 11 suddenly will not print to any printer or .pdf generator, worked fine for months, suddenly will not print anything?

Suggest that you reset preferences:
http://www.youtube.com/watch?v=-loowrOtvVk

Desktop software 6.2.2 from Access not printing all datebook records

Hi. For some reason when I print a range of dates (list format) a record may not get printed. The record is clearly there in the handheld (TX) and desktop but it won't print.
For instance, I printed the range 1/5/10 to 1/18/10 and, for 1/18, there are records for 11:30a, 3p, 6:30p, 9p and 10p. All of the records print except the 9p record! [NOTE: The 10p record is a repeating event.]
I just printed the range 1/5/10 to 1/19/10 and all of the records on 1/18 printed correctly, but this doesn't suit my purposes.
Any clues or fixes?
Thanks
Post relates to: Palm TX

I asked this in a different forum yesterday and have gotten no reply so far, so I'll try here. Is there some trick to getting the "PIM Conduit Sync->Sync with Outlook" option to work under Vista 32 with Outlook 2007 sp1? The company "upgraded" me from an XP system running Office 2006? (whatever the previous version was) to a new Vista machine running OUtlook 2007. I installed Palm desktop 6.2 from Palm's download site to get the latest version and selected Outlook as my sync source for my Tungsten TX. Sync reported no errors except for the database file that's been there since forever, so I assumed that everything was working correctly. Until I noticed that no appointements were being transferred... Got to looking and while the TX conduit manager shows both calendar AND Date Book conduits as active, the Hotsync on the Laptop shows ONLY Date Book and is synchronizing with Palm Desktop, despite the PIM Conduit Sync->Sync with Outlook happily proclaiming that "Outlook is already set up to manage your calendar, contacts, notes...". "Calendar" is not even a Selectable option on the PC side. So is this an Outlook 2007 problem, a Vista problem, a Desktop 6.2 problem, or something that nobody else has ever heard of?
Post relates to: Palm TX

Creating a cover letter from pc, not printer control panel HP Officejet pro 8600 Plus

I used to be able to create cover letters for my faxes directly from HP printer software installed on pc, via desktop shortcut. I am all up to date on software, drivers, firmware, etc. It simply disappeared-I had it for about a year. I called HP, and I was a bit surprised as the tech rep did not know what a cover letter is and its purpose when faxing. I can only fax from printer control panel and can not format cover letters from there. Please help! I need to send cover letters from time to time and that functionality simply disappeared. I have unistalled and reinstalled software and hardware several times to no avail.

Hello there! Welcome to the forums @bkgkrib ,
I read your post and added a screen shot of what I believe you are referring to. I will do my best to help you. Could you let me know what operating system you are running? I will look into this some more for you as to what could have happened. Also tell me if you had recently made any changes such as an upgrade, new computer, new router, ISP, any changes at all.
Also let me know how you have the printer connected (wireless, ethernet or usb).
Thank you
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

Some elements in folio not showing up in Adobe Content Viewer

I have a indesign page I uploaded into my folio and when I preview it on my computer and my ipad in adobe content viewer some of the type and logos are not showing up. They do not have any interactive elements
assigned to them just a text box and a placed .eps. Any ideas as to why some of these elements are not showing up?

I made a new document and copied my files over and the folio shows up fine! Something in that file was messed up.

Some fields in form not printing but do print when printing fields only

Hope that someone can help with this. I have filled in some forms (supplied by a third party) and when I print these forms the content of some fields are printed, and some are not. I have found out that if I cut a field's content, then paste into the same field, then tab out of the field, then the field content will be printed. I have about 20 of these forms with a lot of fields, so I would prefer another solution ;-)
The strange thing is, when I choose to print fields only (I have Dutch version of Acrobat, not sure if it has that exact name in English) ALL fields are printed correctly!
I have scanned the forums and tried several printing options, including printing as image.
I have tried using Acrobat 8.1.6 Standard on Windows (at the office) and the latest Acrobat Reader on both Ubuntu Linux and Mac OSX (at home) with the same results.
Any suggestions?
thanks
Paul

The first time I chatted with iTunes support they ended it by giving me 2 free song downloads. No offense, but I don't want to download anything but what I've already paid for. The second person to help me through email support gave me 6 free song downloads. This is frustrating because neither can offer a solution to why iTunes says 6 of this album's tracks are downloaded to my computer and won't allow me to redownload them... BUT on another device I can redownload the album in its entirety. That sounds like a very technical question that I just don't think they train their support staff to handle.
So, does anyone know how I can get this computer to UNRECOGNIZE these songs as downloaded, thus allowing me to download the full album to this computer?!

Elements 9 will not print due to "program error"

Running Windows 7 - 64bit, 4GB memory. Have printed photos successfully. Recently added ICC profiles. Programs fails to print with either of 2 printers. Each printer will print happily with another photo editor. Tried uninstalling and reinstalling EL9, did not help. Any ideas?

xqzdust wrote:
I can't change the name in devices and printers. I can highlight it but that's all. Is there a trick I don't know of that allows you to change or alter the name?
Open Devices and Printers.
Right-click on the icon for the printer and select "Printer properties".
Click the "Change Properties" button on the lower left of the dialog.
Enter the Administrator's password when prompted.
On the "General" tab in the next dialog, you can change the name.
From that last dialog, you might want to click the "Preferences" button and see if you can change the default behaviour to print instead of fax.
Ken

CS4 Some elements from Master not Printing?

Similar Messages

Maybe you are looking for