CS4 startup failure caused by MCmpgACodec.vca

Premiere CS4 worked fine until a couple of months ago then it suddenly started to crash on startup. I recently found out that removing the latest MCmpgACodec.vca file in Premieres MediaIO/Codecs directory made Premiere launch again, but now it tries to get this codec re-installed all the time. I found a 2007 version of the codec used in CS3 (the CS4 version causing the trouble is from september 2010) and that seems to work somewhat better though the codec installer is triggered still. So it's not really solved with that, though I have CS4 more or less running again.
Anybody any ideas why this codec causes me so much trouble and what can be done about it?
(I work on a Win7 64bits platform)

Hello 368nkh,
If you’re getting an error on a blue screen it could be caused by software or drivers. Try to start the computer in safe mode with command prompt by tapping F8 at startup. If you are able to load command prompt run the following command SFC /scannow. This should check the system for any errors and repair them if it can.
If you are not able to get into command prompt, you can create repair disks. Once you create the disks, you should be able to run the disk from start up. They should correct any errors that you’re having.
Here is a link on how to create repair disks.
Let me know if this helps.

Similar Messages

[svn] 4950: * Fixed some junit test failures caused by revision 4939.

Revision: 4950
Author: [email protected]
Date: 2009-02-13 08:31:33 -0800 (Fri, 13 Feb 2009)
Log Message:
* Fixed some junit test failures caused by revision 4939.
tests Passed: checkintests
Needs QA: YES
Needs DOC: NO
Bug fixes: SDK-19299
API Change: NO
Reviewer: Darrell
Code-level description of changes:
Modified compile() by moving check for no inputs above the call to
recompile().
Modified link() to only call FileUtil.getCanonicalPath() if the
output is not null.
Ticket Links:
http://bugs.adobe.com/jira/browse/SDK-19299
Modified Paths:
flex/sdk/trunk/modules/compiler/src/java/flex2/tools/oem/Library.java

Step failure causes sequence failure Option

Hi !
I need some clarification about the Step failure causes sequence failure Option , I'm using TS 4.2 Under Win XP .
Lets say i have a Seq with 4 steps in all of then Step failure causes sequence failure Option is Checked .
Record Result in all of the3 steps is Checked , If the first step will fail will it perform the next steps ? and will it record the result for this steps ?
Thank U .
Kobi Kalif
Software Engineer

Record Result in all of the3 steps is Checked , If the first step will fail will it perform the next steps ? YES
and will it record the result for this steps ? YES
What this is signifying, is if a Step fails then when the Sequence has completed and returned back to the caller the status of this step will be FAILED.
If you need to jump to Cleanup then you will need to set the Post Action.
regards
Ray Farmer
Regards
Ray Farmer

Install FormsFT Helper Failure: Cause: Dynamic enable formsFT failed, no any JRE is static or dynamic enabled.

Hi
I just install the OATS 12.4.0.2.129, no problem at all, but when I try to start recording an EBS Functional test, I'm getting this message:
Install FormsFT Helper Failure:
Cause: Dynamic enable formsFT failed, no any JRE is static or dynamic enabled.
I have JRE 1.6.0_45, Firefox 24. I have already run the OpenScript Diagnosis Tool and solve the issues listed, but still have the same problem. Can anyone help me with this?
FYI: When I start record a functional test, no EBS, but Web, I have no trouble.
Regards
Diego L

Hi
I just install the OATS 12.4.0.2.129, no problem at all, but when I try to start recording an EBS Functional test, I'm getting this message:
Install FormsFT Helper Failure:
Cause: Dynamic enable formsFT failed, no any JRE is static or dynamic enabled.
I have JRE 1.6.0_45, Firefox 24. I have already run the OpenScript Diagnosis Tool and solve the issues listed, but still have the same problem. Can anyone help me with this?
FYI: When I start record a functional test, no EBS, but Web, I have no trouble.
Regards
Diego L

Activate or skip "Record Results" and "Step Failure Cause Sequence Failure" for all steps of a step type

Hello all,
I am using teststand 3.1
Is it possible to skip or activate ´"Record Results" and "Step Failure Cause Sequence Failure" for all steps of a step type.
It is very much work to do this for all steps, because I have hundred of steps
regards
samuel

hi,
here is an example that will change the TS.NoResult. You just have to change this area of the sequence to suit your needs
I haven't added any fancy stuff, such as adding a filedialog to get the seq file to change, you will find the various variables in the Locals.
Hope it helps
There is a version for 3.1 and 3.5.
Regards
Ray Farmer
Regards
Ray Farmer
Attachments:
ChangeStepTypeRunMode.zip ‏30 KB

[svn:bz-4.0.0_fixes] 20615: fixing the regression failure caused by the nest collection level fix, an actionscript type without remote alias will resolved as " className", we should filter out the special case

Revision: 20615
Revision: 20615
Author:   [email protected]
Date:     2011-03-04 12:11:09 -0800 (Fri, 04 Mar 2011)
Log Message:
fixing the regression failure caused by the nest collection level fix, an actionscript type without remote alias will resolved as ">className", we should filter out the special case
Modified Paths:
    blazeds/branches/4.0.0_fixes/modules/core/src/flex/messaging/io/amf/AmfIO.java

Remember that Arch Arm is a different distribution, but we try to bend the rules and provide limited support for them. This may or may not be unique to Arch Arm, so you might try asking on their forums as well.

How to fix windows 7 startup failure? Windows startup repair cannot help

Recently, my laptop have problem with the startup and unfortunately it is showing crash dump error as well.
This is the error mesage for startup issues: c000021a fatal system error, intial session process or system process terminate
and this is error message for crash dump: STOP: 0x0000000A (0xFFFFF80003BEDE60, 0x0000000000000002, 0x0000000000000008, 0xFFFFF80003BEDE60)
So, when i start my laptop it comes up with the startup c000021a fatal system error. I tried to go to startup repair and chose the "Last Known Good Configuration (advanced)" after that it shown system crash dump error message.
Unfortunately, I did not make the restore point. I want to reinstall my windows but it cant boot from CD/DVD due to startup failure. I already choose the booting sequence to CD/DVD as first sequences but it still does not work.
Anyone can help me with this issues?

Hi Arie K,
Please explain a bit about the following question for better analyzation:
1. What changes have you made before this issue?
2. Do you receive the same error message when we use the normal boot, safe mode and Last Known Good Configuration? If no please share it with us.
3. What error messages do you receive when we try to boot from CD/DVD?
We could try to use the USB driver to performance the system restore or reinstall.
For more information, please refer to the following article.
How to Build a Bootable USB Drive? or How to Install an Operating System from a USB Device?
http://blogs.technet.com/b/chenley/archive/2011/10/06/how-to-build-a-bootable-usb-drive-or-how-to-install-an-operating-system-from-a-usb-device.aspx
Best regards,
Fangzhou CHEN
Fangzhou CHEN
TechNet Community Support

Lenovo update causes startup failures

I just used the Lenovo update and now my W520 throws several failures on boot. It also caused a BSOD. Specifically my W520 is running Windows 7 and I get popups saying "There was a problem starting C:\Program The specified module cannot be found." it also says "You cannot install an older versio of Bluetooth software over a newer versino ... [-349].
Also PC Doctor won't run and the system BSOD whn I attempt to connect an external monitor. All this after I updated using the Lenovo update.
HELP!!!!

Welcome to Lenovo Community, rcarbis. Thank you for sharing your experience. This may indeed help others.
ThinkPad: T530 / X1 Gen 2 / Helix - Yoga: Tablet 2 Pro (Win) / Yoga 3 Pro
If you find a post helpful and it answers your question, please click the "Accept As Solution" button.
Lenovo Advocate ~ I am not employed by Lenovo or Microsoft. I am a volunteer.
Microsoft MVP - Consumer Security
SpywareHammer

Run of "check for updates" causes JDev 10.1.3 startup failure

Hello - I just ran a check for updates, saw that I was behind on a few, and installed the updates. Then I shut JDev down and tried to restart. The startup screen will show for a few seconds and then just disappear, and JDev will never run. I have tried rebooting my machine -- didn't help.
Any suggestions?
thanks, Keith

C:\jdev10.1.3\jdev\bin>jdev
java.lang.NullPointerException
at java.util.StringTokenizer.<init>(StringTokenizer.java:146)
at javax.ide.util.Version.convert(Unknown Source)
at javax.ide.util.Version.<init>(Unknown Source)
at oracle.ideimpl.extension.ExtensionManagerImpl$ExtensionInformation.sartElement(ExtensionManagerImpl.java:1225)
at oracle.xml.parser.v2.NonValidatingParser.parseElement(NonValidatingPrser.java:1265)
at oracle.xml.parser.v2.NonValidatingParser.parseRootElement(NonValidatngParser.java:321)
at oracle.xml.parser.v2.NonValidatingParser.parseDocument(NonValidatingarser.java:288)
at oracle.xml.parser.v2.XMLParser.parse(XMLParser.java:249)
at oracle.ideimpl.extension.ExtensionManagerImpl$ExtensionInformation.gtInformation(ExtensionManagerImpl.java:1184)
at oracle.ideimpl.extension.ExtensionManagerImpl$ExtensionInformation.ppulate(ExtensionManagerImpl.java:1145)
at oracle.ideimpl.extension.ExtensionManagerImpl.extensionToInitialize(xtensionManagerImpl.java:627)
at oracle.ideimpl.extension.ExtensionManagerImpl.findExtension(ExtensioManagerImpl.java:196)
at oracle.ideimpl.extension.AddinManagerImpl.startup(AddinManagerImpl.jva:980)
at oracle.ideimpl.extension.AddinManagerImpl.initialize(AddinManagerImp.java:820)
at oracle.ide.IdeCore.startupImpl(IdeCore.java:1110)
at oracle.ide.Ide.startup(Ide.java:563)
at oracle.jdeveloper.JDeveloper.launch(JDeveloper.java:77)
at oracle.jdeveloper.JDeveloper.main(JDeveloper.java:47)java.lang.NullPointerException
at oracle.ideimpl.extension.JDevExtension.getExtensionUserHome(JDevExtesion.java:67)
at oracle.ideimpl.extension.AddinManagerImpl.getExtensionUserHomeURL(AdinManagerImpl.java:333)
at oracle.ideimpl.extension.ExtensionManagerImpl.copyExtensionUserData(xtensionManagerImpl.java:272)
at oracle.ideimpl.extension.AddinManagerImpl.startup(AddinManagerImpl.jva:995)
at oracle.ideimpl.extension.AddinManagerImpl.initialize(AddinManagerImp.java:820)
at oracle.ide.IdeCore.startupImpl(IdeCore.java:1110)
at oracle.ide.Ide.startup(Ide.java:563)
at oracle.jdeveloper.JDeveloper.launch(JDeveloper.java:77)
at oracle.jdeveloper.JDeveloper.main(JDeveloper.java:47)

Adobe Version Cue CS4 -- startup entry in Windows 7

Greetings,
I want to know if something will go wrong with Version Cue if I will disable it in Windows startup list.
Is it really necessary to keep it enabled if I use it very rarely? Will the program function correctly if I'll start using it without this entry?
Thanks.

I was of the understanding that CS4 was available in 32-bit and 64-bit varieties? I was aware, of course, that only some of the software was truly 64-bit, but is it the case that by owning CS4 in general, I actually do have the 64-bit version? That's a relief... if I'm understanding correctly.
I'll only be running 4GB of RAM, unfortunately, but I don't do a lot of intensive things with CS4 anyway--I mostly picked up Web Premium to learn some of the Adobe tools for my future work life, and to play around with some basic Web design. I'm sure 4GB's will suffice. If not, I can always upgrade later! I definitely plan to do a fresh install when I my copy of 7 arrives... I'm still rather superstitious of OS "upgrades" after the days of Windows 95 and 98 upgrading. heh
I actually had a bit of a computer problem that prevented me from deactivating my previous install... hopefully it won't cause me too much difficulty to get it back up and running!
Thanks for the information, Bob!

Hard Drive and Startup Failure Code(Model: G61-429WM) Notebook

Windows won't start because it is missing a .DLL file. I ran the system diagnostic tests( Hard Drive and Startup) they both gave me the same failure code(UOC7HA-52H74A-XD0021-60X603). When I turn the computer on, it tells me to insert the system disc which I don't have. Please advice. Thank you!

Sounds like the hard drive has failed and will need to be replaced. If you are still in warranty HP will send a replacement. If not a retail laptop SATA hard drive can be used. Just be sure to get one of at least equal capacity as the original in order to use Recovery Discs. It can be larger, but not smaller capacity.For instance if you have a 500GB hdd you could use a 750GB hdd but not a 320GB hdd.
******Clicking the Thumbs-Up button is a way to say -Thanks!.******
**Click Accept as Solution on a Reply that solves your issue to help others**

How to have a runtime error or failure cause all executions to stop and cleanup

I am using batch parallel mode. It's easy enough to terminate or abort all executions from SequenceFilePostStepRuntimeError using IEngine.TerminateAll() and .AbortAll(), but I would like to be able to set an error on all my running executions and cause them to run cleanup when I encounter an error on ANY of the test socket executions.
Anyone have an example of how I might do this?
Thanks,
Jake

I did something like this for a failure handler once... and looking through my code I think the biggest headache is to realize that one execution socket has no easy way of seeing the execution references for other sockets. These things are kept by the process model's top level execution... which you also don't have a super easy time accessing without tweaking some logic in your Model file.
(1)Somehow or another you want to get access to the "TestUUTs"/"SinglePass" Fileglobals.TestSocketExecutions[] array and make use of it in your classic RuntimeError callback. The easiest solution (but not the most elegant) would be to edit your model to copy/clone the file global into someplace more convenient... ie "TestUUTs - TestSocketEntrypoint".
(2) in your error callback, handle your error as usual i.e. tell top level sequence to go to cleanup etc. but also loop through the other execution references and do some variation on GetSequenceContext() and setting Runstate.sequenceErrorCode and the rest. The example api calls below are probably overkill...
Locals.currentExeContext=Locals.currentexecution.AsExecution.GetThread(0).GetSequenceContext(0, Nothing)
Locals.currentExeContext.AsSequenceContext.SequenceErrorCode=Locals.RecievedError.Code,
Locals.currentExeContext.AsSequenceContext.SequenceErroroccurred=Locals.RecievedError.Occurred,
Locals.currentExeContext.AsSequenceContext.SequenceErrorMessage=Locals.RecievedError.Msg,
Locals.currentExeContext.AsSequenceContext.ErrorReported =True, Locals.currentExeContext.AsSequenceContext.GotoCleanup =True
I'm using "Locals.RecievedError" as my error buffer in this case because it made sense to me to modifiy the error text to include which socket actually had the error (since now it's propigated to all sockets).
Locals.RecievedError.Msg=Parameters.Step.Result.error.msg+" Occurred on Socket#"+Str(RunState.TestSockets.MyIndex)
or something like that...
Was this what you were looking for? If you're really stumped and can tell me what version of TS you're using, I'll try and extract an example from my old code that you can use, but hopefully this helps.
Cheers,
Elaine R.
www.bloomy.com

Startup failure after the mass updates install

Hello MacWorld:-)
I really hoped I will never have to post anything here as long as I have Mac:-) and for almost a year nothing happened, everything worked smooth and easy. But several days ago I decided to install a number of updates, like about 10. The updates for the MacOS default applications plus this huge (300 Mb) update for the MacOS itself.
The only problem with this update was I couldn't download couple updates and I decided to leave them for a future reference. Well...after I rebooted my MacMini I saw a usual boot apple and spinning sign and that's it. A startup stuck on this stage. I waited like 30 mins or more and I thought 'Gosh...I wish I never install these updates....
Now after trying to reboot it several times, holding Shift or C while a startup, holding windowsalt+PR at the same moment I gave up. The matter fact is I don't have a Mac keyboard, so I use USB Genius wireless keyboard+mouse. And I assume it may cause troubles with my attempts to boot at the safe mode or from the distibution disk #1.
Mac Mini Mac OS X (10.4)

ok I found how to fix the black sreen problem.
1. you need another MAC
2. Go to http://docs.info.apple.com/article.html?artnum=303469 and follow the instuctions.
You need to download the "Firmware Restoration CD 1.2" from http://www.apple.com/support/downloads/
good luck!

Startup failure!

Well, here's how it is. Startup leads me only to the logo with an endlessly spinning progress dial. Safe booting also leads here. The only way for me to get anywhere is to boot up with the startup disc, and from there all I can really do is use the disc utility. Unfortunately it finds errors with the number of threads and such that it cannot repair after three tries. I've had the same results from fsck. Safe booting now leads to kernel panics. Is there some other way I can use the startup disc to reach safe mode? Any response appreciated.

The system profiler should show you the SMART status of the drive.
If the SMART status indicates that the drive has failed or is going to fail then it will have to be replaced. Prices vary depending upon size and speed. You can get drives from $89.00 up to many hundreds of dollars.
If the profiler indicates the drive has failed then you can't use any disk repair utility on the drive. You also cannot install a new system on it. You do have a backup of all your important files don't you?
If not then you will have to either accept that your data is lost or you will have to purchase recovery software which may or may not be able to recover the data on your drive.
If the SMART status does not indicate failure then I don't know what you can do. If the installer disk cannot even see the drive I don't know how you would do a reinstall of the system.

WLS 10.1 server startup credentials cause server to fail

Hello all,
Any guidance or assistance given towards configuring WLS to meet the stated requirements and correct the isssues listed would be greatly appreciated.
The requirements:
1. a domain configured with two managed servers in a cluster on a single linux host
2. admin and managed servers should startup as the "bea" user instead of root
3. servers should automatically start at boot for run states 3,4,5
4. node manager should control the servers and restart them if they crash
5. node manager and admin servers are started at boot in rc script.
6. node manager is started as root.
Current Issue:
servers will not stay running with user/pass set on "server start" page. Credentials used were the admin user for the domain. Why is this breaking?
Exception: Authentication for user denied
weblogic.security.SecurityInitializationException: Authentication for user denied
at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.doBootAuthorization(Unknown Source)
at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initialize(Unknown Source)
at weblogic.security.service.SecurityServiceManager.initialize(Unknown Source)
at weblogic.security.SecurityService.start(SecurityService.java:141)
at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:200)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:172)
The domain was installed using the admin credentials of "bea" and a password of "abcd1234". These are the correct parameters to put into the "server start" page parameters for each server?

Admin credentials issue has been resolved. (recreated the domain)
Any best-practices on how to implement the requirements listed in my previous e-mail would still be really appreciated.
All of the servers seem to start as the "bea" user now, but one of the two managed servers crashes within 2 minutes of being started. No cause seems evident from the logs with the default logging levels. I have not tracked down the error yet. There are no applications deployed... It seems as if the two managed servers are conflicting somehow.

CS4 startup failure caused by MCmpgACodec.vca

Similar Messages

Maybe you are looking for