CS4 stops responding for long periods of time
First of all, let me say that I am very enthused with the changes in CS4. I feel that this is the best update to PhotoShop that I have seen, and I am a user since version 3.0.
The problem that I see, ocassionally, is that PhotoShop becomes non-responsive for a long period ie: 1-2 minutes. I have experienced this on both my desktop (64 bit Vista Ultimate and 64 bit CS4) and my laptop (32 bit Vista Ultimate). During this time the disk drive is continuously active as though it is swapping the file to disk. The file size, however, is not large enough to cause this and the utilization factor is shown as well below 100%. After a period of time the disk drive stops and CS4 becomes responsive again.
The system is an AMD dual core processor with 6GB RAM on the desktop and 2GB RAM on the laptop. Both systems use SATA hard drives. The CS4 scratch disc is a separate dedicated drive on the desktop. Both systems use Nvidia video and open GL is working fine on both computers. Both computers have the latest Nvidia drivers. Since there are no open GL problems, I assume that the video drivers are okay. As I have said, I see this problem on both my laptop and my desktop.
Thanks for the replies. The desktop was default to a net printer, however the laptop was default to a local printer. I will try a local printer on the desktop and will let you know the results in a few days.
Similar Messages
-
I frequently use the singles pages on wikipedia, for example: http://en.wikipedia.org/w/index.php?title=Category:2012_singles&from=D
So I had already clicked on the links some months ago on the 2012 singles pages, but firefox forgot that I had clicked on the links there. How can I make it so it remembers for longer periods of time without causing problems to firefox? Also, I want it to remember what links I've clicked on the 2013 singles pages, because I am also keeping up with that. Can I tell firefox to remember all history for these pages, such as 2012 singles, or 2013 singles specifically? I just want firefox to remember what links I've visited, as in, the songs in the 2012/2013 singles pages, and not forget those, because I have already downloaded those so I want firefox to keep track. What are my options? Please let me know, and I hope you understand the problem I am describing.My Firefox remembers history from over a year ago, and unless you are using a setting or external tool to clear it, or load huge numbers of pages/download huge numbers of files, Firefox should pretty easily remember links you've accessed in recent months.
To see what Firefox has computed as the number of URLs to remember, you can check here:
(1) In a new tab, type or paste '''about:config''' in the address bar and press Enter. Click the button promising to be careful.
(2) In the filter box, type or paste '''.hist''' and pause while the list is filtered
(3) Look for '''places.history.expiration.transient_current_max_pages'''
Mine's set to 104858. I don't know how that was determined. -
Why is my cursor taking holidays and choosing to not respond to my mouse or mice as I have more than one that I can use and it refuses to respond for a period of time
Hi
Yes you can delete the expired certificate which are showing as it is not functional anymore and they remain as stale entries
You can use below command
Remove-ExchangeCertificate -Thumbprint "specify the value "
Remember to mark as helpful if you find my contribution useful or as an answer if it does answer your question.That will encourage me - and others - to take time out to help you Check out my latest blog posts on http://exchangequery.com -
Keyboard Stops Responding For Minutes At A Time, Then Comes Back Normal
This is a very strange problem that has appeared in the last week or so. Right now as I am using my PowerBook G4 10.4.9 2GB RAM everything is working fine. But every once in a while the keyboard will completely stop responding. The mouse/cursor can be moved anywhere, I can click on any window to make it active but the keyboard is completely dead. Then as mysteriously, it will come back to normal --- as I am typing this literally 2 minutes after it happened.
Anyone else having this problem and/or has a solution? Thanks.
ImranOK, maybe not two minutes but 66 seconds... but in either case, at first it was almost long enough to make me think I had to do a hard reboot but then it came back to normal.
Also, the tabs near the top I think are applicable to my older PowerBook G3s... you just reminded me to put them on eBay. I do not think there are such tabs on the PowerBook G4 but I'll check again - no, I don't see them.
Thanks.
Imran -
Last pulse high for longer period of time
Hi guys
Me again with another problem.
I am attaching the VI with the post. Now the VI generating pulses of 100 Hz frequency(clock, which is connected to signal generation block). Now all the 63 pulses are coming correctly but last pulse high for almost 30 mSec. I could not find a solution. Could DAQ task is not be clearing properly??? I am at lost...Any help???? Thanks in advance.....
Attachments:
telecommand_1.vi 62 KBYou have to change the numeric constant (connected to the "Eaqual to")from 63 to 62 in your for loop. Remember that "i" starts with the value 0. Since the for loop runs 63 times you will never get 63 as value for "i".
Regards,
Even
Certified LabVIEW Associate Developer
Automated Test Developer
Topro AS
Norway -
my 3gs battery dies rapidly and gives off excessive heat when in use no service anywhere, slow reponse time sometimes not at all like lights on but no one home, calls drop can text no 3g can not connect to vehicle usb as a note i restored the phone from my back up
Same problems, unfortunatley I updated to 5.0 1 hour before going on holiday for three weeks and no way to restore my phone to try to remove it.At the same time, drop outs, range problems and the most annoying was my music and apps were corrupted and would not function properly :-(
-
Cisco 2911 stops responding after a period of time
I have a Cisco 2911 router with 4 T1 connections. Two are set as a multilink and the other two are for two other locations. The router will run fine, but after a month I cannot ping the gigabit ethernet 0/0 interface. I would have to manually reboot the router to get it to respond again. Before I noticed a lot of interface discards which would shutdown the 2911 and a manual reboot would be needed, but for this time it isn't the case. Where would I start with this the memory and cpu usage are fine.
Here is the config:
Current configuration : 2905 bytes
version 15.0
service timestamps debug datetime msec
service timestamps log datetime msec
service password-encryption
hostname 2911
boot-start-marker
boot-end-marker
card type t1 0 0
card type t1 0 1
no aaa new-model
clock timezone gmt -5
clock summer-time cdt recurring
no network-clock-participate wic 0
no network-clock-participate wic 1
no ipv6 cef
ip source-route
ip cef
multilink bundle-name authenticated
license udi pid CISCO2911/K9 sn FTX1513ALLS
controller T1 0/0/0 -- Multilink
cablelength long 0db
channel-group 0 timeslots 1-24
controller T1 0/0/1 -- Multilink
clock source internal
cablelength long 0db
channel-group 0 timeslots 1-24
controller T1 0/1/0
clock source internal
cablelength long 0db
channel-group 3 timeslots 1-24
controller T1 0/1/1
clock source internal
cablelength long 0db
channel-group 2 timeslots 1-24
buffers middle permanent 200
buffers middle max-free 230
buffers middle min-free 50
buffers big permanent 75
buffers big max-free 200
buffers big min-free 15
buffers verybig permanent 20
buffers verybig max-free 20
buffers tune automatic
interface Multilink1
ip address 192.168.200.1 255.255.255.252
ip flow ingress
ip flow egress
load-interval 30
ppp multilink
ppp multilink group 1
ppp multilink fragment disable
no cdp enable
hold-queue 4000 out
interface GigabitEthernet0/0
ip address 10.10.99.1 255.255.255.0
ip flow ingress
ip flow egress
duplex auto
speed auto
interface GigabitEthernet0/1
no ip address
shutdown
duplex auto
speed auto
interface GigabitEthernet0/2
no ip address
shutdown
duplex auto
speed auto
interface Serial0/0/0:0
no ip address
encapsulation ppp
ppp multilink
ppp multilink group 1
no fair-queue
hold-queue 40 out
interface Serial0/0/1:0
no ip address
encapsulation ppp
ppp multilink
ppp multilink group 1
no fair-queue
hold-queue 40 out
interface Serial0/1/0:3
ip address 192.168.1.2 255.255.255.0
ip flow ingress
ip flow egress
load-interval 60
no fair-queue
hold-queue 4000 out
interface Serial0/1/1:2
ip address 192.168.8.2 255.255.255.0
ip flow ingress
ip flow egress
load-interval 30
no fair-queue
hold-queue 4000 out
ip forward-protocol nd
no ip http server
no ip http secure-server
ip flow-cache timeout active 1
ip flow-export source GigabitEthernet0/0
ip flow-export version 5
ip flow-export destination 10.10.14.49 2055
ip route 0.0.0.0 0.0.0.0 10.10.99.10
ip route 10.10.17.0 255.255.255.0 192.168.1.1
ip route 10.10.25.0 255.255.255.0 192.168.8.1
ip route 10.10.94.0 255.255.254.0 192.168.200.2
snmp-server community ipBalance RO
snmp-server community SolarWinds RO
control-plane
line con 0
logging synchronous
line aux 0
line vty 0 4
session-timeout 60
privilege level 15
password 7
logging synchronous
login
transport input telnet
scheduler allocate 20000 1000
endKishore,
I just hard coded the gigabit 0/0 to 1000 full duplex. The interface errors were occuring on the serial interfaces due to someone doing videoconferencing and trying to use more than 1.5Mbps over the T1. Once they throttled down the video conferencing equipment, the errors seemed to go away.
IOS is
Cisco IOS Software, C2900 Software (C2900-UNIVERSALK9-M), Version 15.0(1)M4, RELEASE SOFTWARE (fc1)
For syslogs I enabled:
logging trap notifications
logging IP of syslog server
service timestamps debug datetime msec
service timestamps log datetime msec localtime show-timezone year -
I have purchased the nike sensor to use with my Ipod touch. I tried it on the golf course and it kept pausing after time.. I tried the different ways to work out eg basic, timed, calories...but it kept pausing after a short distance. Is this because you stop and start with golf? Is there a setting I can adjust?
Try disabling graphics hardware acceleration. Since this feature was added to Firefox, it has gradually improved, but there still are a few glitches.
You might need to restart Firefox in order for this to take effect, so save all work first (e.g., mail you are composing, online documents you're editing, etc.).
Then perform these steps:
#Open Firefox ''Options'' window (''Preferences'' on Mac or Linux) as follows:
#* In Firefox 29.0 and above, click the menu button [[Image:New Fx Menu]] and select ''Options'' for Windows or ''Preferences'' on Mac or Linux.
#* In Firefox 28.0 and previous versions, click the orange Firefox button at the top left, then select the "Options" button, or, if there is no Firefox button at the top, go to Tools > Options.
#In the Firefox Options (or Preferences) window, click the ''Advanced'' tab, then select ''General''.
#In the settings list, you should find the ''Use hardware acceleration when available'' checkbox. Uncheck this checkbox.
#Now, restart Firefox and see if the problems persist.
Additionally, please check for updates for your graphics driver by following the steps mentioned in the following Knowledge base articles:
* [[Troubleshoot extensions, themes and hardware acceleration issues to solve common Firefox problems]]
* [[Upgrade your graphics drivers to use hardware acceleration and WebGL]]
Did this fix your problems? Please report back to us!
Thank you. -
Preserve iphone without using it for long period of time
I will not use my iphone for a long time ahead, what should I do to preserve it?
Do not listen to zelous. Never let your battery depleted completely, it will damage it.
Extend Battery Life if Storing Your iPhone
If you will not be using your iPhone for a while, charge the battery up to 50 percent before storing it.
From: http://www.apple.com/batteries/iphone.html -
Camera that can record while charging for long periods of time
I am looking for a camera that is under $80 that can accept a 32gb card and has the ability to continuously record while it is charging. Does anybody know of any cameras that have these options? Thanks.
Don't know what exact model you want, but you can have a look on this site: http://www.tinydeal.com/index.php?main_page=ws_search_result&keyword=camera&-px2wedn-=&cat_change=true. Many camerea to choose and within your budget.
-
Spinning rainbow wheel for long periods on File Open commands in Acrobat and Office 365 programs
Hardware & Software:
MacBook Pro (17-inch, Mid 2009)
77GB of free hard disk space
8GB RAM
Running OS X Yosemite (Version 10.10.2)
Over the last few days, when I try to execute a File Open command from Adobe Acrobat or Office 365 programs (even from an innocuous location such as Documents), I get the spinning rainbow wheel for long periods of time (10 seconds to minutes) before I am able to select a file to open. I copied messages from Console after a File Open command for each of Adobe Acrobat and Excel (the selected location was Documents), given below:
Excel Log Messages
2/24/15 5:50:50.970 PM WindowServer[147] disable_update_timeout: UI updates were forcibly disabled by application "Microsoft Excel" for over 1.00 seconds. Server has re-enabled them.
2/24/15 5:51:01.280 PM NetAuthSysAgent[684] AFP error -1 mapped to EIO
2/24/15 5:51:01.281 PM NetAuthSysAgent[684] ERROR: AFP_GetServerInfo - connect failed 5
2/24/15 5:51:01.281 PM NetAuthSysAgent[684] AFP error -1 mapped to EIO
2/24/15 5:51:01.739 PM WindowServer[147] common_reenable_update: UI updates were finally reenabled by application "Microsoft Excel" after 11.77 seconds (server forcibly re-enabled them after 1.00 seconds)
Adobe Acrobat Log Messages
2/24/15 5:58:22.145 PM bird[257] Assertion failed: ![_xpcClients containsObject:client]
2/24/15 5:58:23.454 PM WindowServer[147] disable_update_timeout: UI updates were forcibly disabled by application "Acrobat" for over 1.00 seconds. Server has re-enabled them.
2/24/15 5:58:29.538 PM NetAuthSysAgent[708] AFP error -1 mapped to EIO
2/24/15 5:58:29.538 PM NetAuthSysAgent[708] ERROR: AFP_GetServerInfo - connect failed 5
2/24/15 5:58:29.538 PM NetAuthSysAgent[708] AFP error -1 mapped to EIO
2/24/15 5:58:29.722 PM WindowServer[147] common_reenable_update: UI updates were finally reenabled by application "Acrobat" after 7.27 seconds (server forcibly re-enabled them after 1.00 seconds)
Can anyone give me an idea of what these messages mean and how I can solve this problem?
If I'm not in the correct Community for this question, could someone kindly tell me where I should re-post?
Thanks.
David WalkerYes; I have previously connected to an iMac at this location using File Sharing. However, in my attempts to solve this problem last week, I had already unchecked File Sharing in System Preferences. Tonight, I also deleted the folder from the window in the File Sharing System Preferences page, then rebooted. The problem still persists.
I try not open files across a server line, i.e., I try always to copy a file to the local computer and open it there. I may have gotten careless and tried to open a file from the Windows server with either or both Acrobat and Office 365. Although this was an SMB share, is it possible that these programs are now trying to connect to the Windows server on a File Open?
I had about decided to quit chasing this problem; we spend about two weeks every two months at this Boston location, and I'll be returning to my Florida home this weekend. So I decided I would see what the situation was when I returned to my native habitat, although I may be chasing this problem again in our trip to the Boston area in April.
The other thing I wondered (I guess I can't quite let it go), is whether there is a command line in Terminal that would kill all AFP shares.
In any case, thanks for your help; you're very knowledgeable. -
The pinwheel is spinning for longer and longer periods of time. Why and what do I need to do about that?
You have 10.6 on that machine, I suggest you stick with it for performance, third party hardware and software reasons as long as possible.
Consider 10.8 (not 10.7) when it's released, because 10.7 and 10.8 will require a new investment in software and newer third party hardware as it requires newer drivers the old machines won't have. (forced upgrade because of software, really nice of them)
http://roaringapps.com/apps:table
Far as your Safari problem do these things until it's resolved:
1: Software Update fully under the Apple menu.
2: Check the status of your plug-ins and update (works for all browsers) also install Firefox and see if your problems continue. You should always have at least two browsers on the machine just in case one fails.
https://www.mozilla.org/en-US/plugincheck/
Flash install instructions/problem resolution here if you need it.
How to install Flash, fix problems
3: Install Safari again from Apple's web site
https://www.apple.com/safari/
4: Run through this list of fixes, stopping with #16 and report back before doing #17
Step by Step to fix your Mac -
How can I record multiple signals for a long period of time?
Hi, everyone
I am new at labView I just recentlyl started using it. Right now I am working on this assignment
that I have to display en record six different signals comming up from a DAQ. so basically What I did
for my IV is placing a whileloop. Inside the while loop I set up the DAQ assistant and then I send that
to a split signal function in order to split the signas that are comming from the DAQ ( so those signals
are EMG1,EMG2, blood flow1, blood flow2, blood pressure, and AM stimulation) after I split the signals
I send each individual signals to a waveforme graph, but my problem is that I need to record those individual
signals for a long period of time every second for about 8 hours. so it will be really helpfull if someone can
guide me through this. Thanks
RegardsHi,
With your while loop, you'd better use low-level VIs to write your data to a file. Please see attached...I've used text file function but if you need ta save a large amount of data, you may need to use binary file functions instead (nearly the same way to perform this whatever you chose text file or binary file function).
Best,
J.
Attachments:
RecordData.vi 27 KB -
For OS X v5 or 6: Whenever I have internet access my disk is running continuously for a period of time without any activity on my part. When I close internet access the disk activity stops. Who is fishing for data?
Thanks for your reply. I don't use itunes so that couldn't be it. Reading about Little Snitch and Hands Off, however, educated me about the data harvesting in many apps and that when buying from the AppStore one will more likely get Apps with benign data harvesting.
-
TO STOP WORKFLOW TEMPORORILY for a period of time
how can i stop running workflow tempororily for a period of time
for ex: 7 days.
any one pls answer this,its urgent
if not pls send any links regarding this topic...hi krishna,
thanks for u r reply,
i created custom function module z*********.
in swe2 for check FM text box i assigned that fn module
In workflow builder start conditions
when click on that start conditions pop screen is appeared
to choose any one.
for the current scenario
--which option i have to choose when i click on start conditions button .
--i have created date attribute in object type,In function module how can i access object attribute to write a condition in function module.
--can u send me the logic please.
Maybe you are looking for
-
I dropped my ipod touch and now it wont charge
I dropped my ipod touch and now it wont charge. When I plug it in to charge it just keeps going off and on.
-
how do i change my bank account details for my direct debit for my sim only plan?
-
Hi, I am using 11i application on 9i database. I tried to run autoconfig on the apps tier. I navigate to COMMON_TOP/admin/scripts/bdev_oraapps and ran auto config [applpdev@ebs pdev_oraapps]$ ./adautocfg.sh after entering the password it show'
-
Problem Saving Photo Attachments to iPhoto
This may be a Mail issue but it affects the iPhoto Library. My Mother accidentally wiped out her iPhoto Library simply by saving a photo attachment to her iPhoto Library file in the Pictures folder. Now, this seemed like a logical place to which to s
-
Trying to install BI tool for jdeveloper
when i try to install BI tool for jdeveloper. it is asking for jdeveloper full path where can i find the full path. please help me in this regard.