CS4: Table issues with MSIE8.0

I could use some help, please. I'm not sure where I went wrong...
I was just swapping out some images on my site to be more customer friendly, and now, after publishing, the left row, the one the images are all in, grows in size when browsing with internet explorer.
This is what it looks like before publishing:
and this is what it looks like after publishing, with IE (firefox and chrome work properly)
I've been fooling around with it for about 3 hours now, but am ready to admit that I am thoroughly stumped this time...

It's in pixels; 760 wide.
I've tried every combination of table aleignment; deleating the new pictures I added; changing the table size; and searching through all the options available to me for something that looked like it would pertain to the issue in some way.

Similar Messages

Adobe CS4 OpenGL issues with 10.6.2 and Intel GMA950 video card

I just upgraded to Adobe CS4 and in PS I cannot enable OpenGL. I'm running 10.6.2 on a Macbook with the Intel GMA950 video card.
I was wondering if 10.6.2 does not have the relevant drivers for CS4 to recognize this chipset or that since the video card is integrated (as opposed to a stand alone with the newer Macbooks) that Intel has not update the drivers? It ***** since I cannot use some functions inside PS without OpenGL.

Hello blue20 & welcome to discussions
1.) You can search these forums for the topic of:
Adobe CS4 GMA950
As an example, if you haven't already, in an effort to parse what's already been discussed.
2.) Have you looked at any of the Adobe forums:
http://forums.adobe.com/message/2356530
3.) How many fonts are you working with?
The general approach at this time is to ask if you've checked for any problematic fonts (all languages) with Apple's Font Book (look in the Applications folder). Find and remove all duplicates also.
Start there to be sure all fonts that are in play come out with a clean bill of health.
Don't hesisate to perform wholesale deletion of old and/or little used fonts - be skeptical of anything that has come from Office 2008, including those related to an Equation Editor installation.
By all means be sure any 3rd party apps AND plug-ins are Snow Leopard compatible.
An additional measure is to clear the existing font caches:
http://www.macworld.com/article/139383/2009/03/fontcacheclear.html
That said, 10.6.2 release notes have this to say about fonts:
http://support.apple.com/kb/HT3874
Fonts fixes provided for:
• an issue with font spacing
• an issue in which some Fonts are missing
• font duplication issues
• an issue with some PostScript Type 1 fonts not working properly
Good luck in any case.

Photoshop CS4 Extended, issues with resolution and font sizes on Mac

I have Photoshop CS4 Extended, which worked fine on my old 15 inch Macbook Pro, I think it was 2011 and had high definition display.
I now have a new 15 inch 'late 2013' Macbook Pro with retina display (2880 x 1800), and OS 10.9.4
I have 2 problems:
1) Using photoshop now, the resolution is a lot worse than with my old computer, even though my screen is higher resolution.
For example, the images themselves are worse resolution on my display, far less crisp and more pixelated than any of my other programs. And even the windows such as 'save as...' screens are terribly pixelated also. Is there a way to fix this?
2) When using the type tool, I cannot find how to change the size of the font. There used to be numbers which I could change, and also select the font type, both on the top menu bar always visible. Now there is not anymore. What there is there at the top, is what looks to be a bar on top of another bar. The top layer bar is on the left and reaches about one third of the way across the top, and I can drag it by its corner so it can extend more, but not less. It looks like there are things behind it which I cannot see, because it is over the top of them. Perhaps the text size and font options are stuck behind that. What can I do?
Many thanks!
Justin

Hi JJMack, you said "Seems like you want a low resolution display hook and external display to it." I do not know what that means. I did a google search for "low resolution display hook" and it came up with zero results. Also I do not have an external display, only my laptop.
Does anyone know what I can do to fix this issue? I would greatly appreciate any solution.
Thank you!

External Table - Issues With Special Character.

I have an external table that reads from a fixed length file. The file is expected to contain special characters. In my case the word containing special character is "Göteborg". Because "ö" is a special character, looks like Oracle is considering it as 2 bytes. That causes the trouble. The subsequent fields in the files get shifted by 1 byte thereby messing up the data. Has anyone faced the issue before. So far we have tried the following solution:
Changed the value of NLS_LANG to AMERICAN_AMERICA.WE8ISO8859P1
Tried Setting the Database Character set to UTF-8
Tried changing the NLS_LENGTH_SYMMANTIC to CHAR instead of BYTE using ALTER SYSTEM
Tried changing the External table characterset to: AL32UTF8
Tried changing the External table characterset to: UTF-8
Nothing works. Other details include:
• File is UTF-8 encoded
• Operating System : RHEL
• Database: Oracle 11gR2
Any thing else that I might be missing? Any help will be appreciated. Thanks in advance!
Ganesh

CREATE TABLE "APP_XXX_XX_XXXX"(
"KEY_NO" NUMBER,
"XXX_XXX_XXXXX" VARCHAR2(1 CHAR),
"XXX_XXX_XXXXX" NUMBER(9,0),
"XXX_XXX_XXXXX" NUMBER(4,0),
"XXX_XXX_XXXXX" NUMBER(2,0),
"XXX_XXX_XXXXX" NUMBER(3,0))
ORGANIZATION EXTERNAL
( TYPE ORACLE_LOADER
DEFAULT DIRECTORY "DIR"
ACCESS PARAMETERS
( RECORDS DELIMITED BY NEWLINE
CHARACTERSET 'UTF8'
LOGFILE APP_XXX_XX_XXXX_%A_%P.LOG'
BADFILE 'APP_XXX_XX_XXXX_%A_%P.BAD'
DISCARDFILE 'APP_XXX_XX_XXXX_%A_%P.DSC'
FIELDS(
KEY_NO POSITION(1:9) INTEGER EXTERNAL,
XXX_XXX_XXXXX POSITION(10:10) CHAR,
XXX_XXX_XXXXX POSITION(11:19) INTEGER EXTERNAL,
XXX_XXX_XXXXX POSITION(11:14) INTEGER EXTERNAL,
XXX_XXX_XXXXX POSITION(15:16) INTEGER EXTERNAL,
XXX_XXX_XXXXX POSITION(17:19) INTEGER EXTERNAL)
LOCATION
( 'FILE1.TXT')
REJECT LIMIT UNLIMITED
PARALLEL 4;
The data forms part of a major driver table, which I may not be able to provide as per the NDA with my company.
The Script I have shared is standard template for creating external table as part of our applications.
We majorly cater for EU regions with this project.(European Characterset needed to be supported)
Thanks
Ganesh
Edited by: RGRAM on Feb 11, 2011 12:44 PM

Table - Issue with Logging Data Changes

Hi Experts,
My client's requirement is to log data changes happened in a table which is critical. I've selected 'Log data changes' check box in technical settings of the table. Now, I'm able to see log for all the changes i did after that. But, I'm facing following issues. Kindly help me in fixing the same.
1. The table is having two fields with same data element. In the change log SCU3, under the field name, field label mentioned in the data element is getting displayed. As, the data element is same for two fields, its difficult to find out which particular field is changed. Is there any way to display table field name instead of field label from data element?
2. Sometime, even there is change in the data record, I'm able to see a log record in the change log with caption 'Data record unchanged'. What might be the problem and how to resolve?
Thanks in Advance,
Siva Sankar.

Hi Moha Nan,
You just use ABAP to change the table P? In this way I think it is not change to X table.
You can upload master data to add navigation,it is a good way to bulid the SID of P table and X
table .
Hope it is help to you!

Cs4 install issues with windows 8

I am having problems installing masters 4 on my new laptop with windows 8 it does not have a dvd player, after days of downloading from your cs4 page i gave up from the errors and went and bought a DVD player to use my discs from adobe... I can get it to open ask if i want to install which I say yes it Starts to run then stops... I have turned off the processes in windows clean booted and same thing.
So after weeks of frustration how do you declaring i install my product?
To avoid this with lightroom i bought just weeks ago i upgraded to the new one to avoid this exact same thing. Amazingly it worked fine after i paid for the new version...
I do not need the upgrades... cs4 does what I need it to do just fine for when i need to use it i mostly use lightroom for work and photoshop and illustrator or every great now and then one of the others in the collection.
This is very frustrating and swaying my client loyalty...
So where can you direct me to directions to install my programs please?
This is preventing me from working.

CS4 was never tested on Win 8 or developed with it in mind. Compatibility issues are to be expectred. Provide exact system info and the install logs:
Working with your Operating System’s Tools
Troubleshoot installation with install logs | CS3, CS4
Mylenium

Dynamic table issue with special character

Hi All,
While creating a dynamic internal table if the fieldname in the fieldcatalog contains any special character like dot(.) , ot is showing the message without creating the dynamic internal table.
* Create a dynamic internal table with this structure
CALL METHOD cl_alv_table_create=>create_dynamic_table
EXPORTING
i_style_table = 'X'
it_fieldcatalog = gt_dyn_fcat
IMPORTING
ep_table = gt_dyn_table
EXCEPTIONS
generate_subpool_dir_full = 1
OTHERS = 2
gt_dyn_fcat contains fieldname with dot.
So the table gt_dyn_table is not creating.
I searched in SCN andd found another method
CALL METHOD
cl_abap_structdescr=>create
But the same issue is aslo here in this method.
Please suggest me any new method in sap to solve the issue.
Best Regards,
Munu

Hi,
Every programing language has its syntax rules.
If you want to use this language you have to follow the rules.
All the peoples involve with SAP ABAP must follow the rules.
and here it is: from http://help.sap.com/abapdocu_740/en/abennaming_conventions.htm
How abut using underscores (_)
Regards.

Table issue with FMZ1

Hi Experts,
i have done the *fund commitment creation of commitment(FMZ1)which have the fields reference and network/activity.when i create and document in fmz1 passing reference along with network/activity and save it.network get stored in KBLP table but corresponding activity and reference donot stored there..i am not getting that the fmz1 activity and reference get stored in which table.experts please help
regards,
Ankit

Hi Nabheet,
THANKS....YA I GOT REFERNCE IN KBLK TABLE..BUT ACIVITY I AM NOT GETTING ANY ON THE TABLES WITH KBL*.
IN ORDER TO GET THESE FIELDS IN FMZI...GO TO TRANSZCTION FMZ1,ENTER DOCUMENT TYPE,COMPANY CODE AND CURRENCY AND PRESS ENTER..IN NEXT SCREEN U WILL SEE 4TH 5TH FIELD IS REFERENCE.AND WHEN CLICK ON DETAILS U WILL FIND NETWORK AND ACTIVITY FIELD.
CAN U PLEASE HELP ME TO FIND THE ACTIVITY FIELD.

Indesign CS4 colour issues with Onyx 7.3 RIP

Hi all. I understand that Onyx Production house and postershop are having problems with colours dropping to white or changing to a completely different colour when sent from Indesign CS4 or a PDF created from the programme. I want to swap to indesign completely, but find myself having to go back to Quark, because the results I get in the rip from indesign files are so random. Has anyone found a solid work around?
Thanks in advance for your help

InDesign can often send more complex postscript than the other apps, it is after all, dealing with a lot more types of information all at the same time. The problem comes in when ID invokes a part of the Postscript standard that hasn't been properly implemented in the RIP.
As you've seen, a workaround that commonly is successful is to export, or even print, to PDF, and sned tot he RIP from Acrobat.
Peter

Premiere Pro CS4 having issues with Windows 7

Hello, I've been using Premier Pro CS4 on my new Sony Vaio that is running Windows 7. I experience slowdown occasionally when editing videos and Premiere has begun to crash a lot and I cannot export any of my projects without a complete crash of Premiere. My laptop has all of the required specifications and I cannot figure out what's going on. Thanks for your help.

Welcome to the forum.
This ARTICLE will give you tips on the types of additional info, that will be so useful to us, in trying to help you.
Good luck,
Hunt

Is there a recommended limit on the number of custom sections and the cells per table so that there are no performance issues with the UI?

Is there a recommended limit on the number of custom sections and the cells per table so that there are no performance issues with the UI?

Thanks Kelly,
The answers would be the following:
1200 cells per custom section (NEW COUNT), and up to 30 custom sections per spec.
Assuming all will be populated, and this would apply to all final material specs in the system which could be ~25% of all material specs.
The cells will be numeric, free text, drop downs, and some calculated numeric.
Are we reaching the limits for UI performance?
Thanks

Performance issues with pipelined table functions

I am testing pipelined table functions to be able to re-use the base_query function. Contrary to my understanding, the with_pipeline procedure runs 6 time slower than the legacy no_pipeline procedure. Am I missing something? The processor function is from [url http://www.oracle-developer.net/display.php?id=429]improving performance with pipelined table functions .
Edit: The underlying query returns 500,000 rows in about 3 minutes. So there are are no performance issues with the query itself.
Many thanks in advance.
CREATE OR REPLACE PACKAGE pipeline_example
IS
 TYPE resultset_typ IS REF CURSOR;
 TYPE row_typ IS RECORD (colC VARCHAR2(200), colD VARCHAR2(200), colE VARCHAR2(200));
 TYPE table_typ IS TABLE OF row_typ;
 FUNCTION base_query (argA IN VARCHAR2, argB IN VARCHAR2)
 RETURN resultset_typ;
 c_default_limit CONSTANT PLS_INTEGER := 100;
 FUNCTION processor (
 p_source_data IN resultset_typ,
 p_limit_size IN PLS_INTEGER DEFAULT c_default_limit)
 RETURN table_typ
 PIPELINED
 PARALLEL_ENABLE(PARTITION p_source_data BY ANY);
 PROCEDURE with_pipeline (argA IN VARCHAR2,
 argB IN VARCHAR2,
 o_resultset OUT resultset_typ);
 PROCEDURE no_pipeline (argA IN VARCHAR2,
 argB IN VARCHAR2,
 o_resultset OUT resultset_typ);
END pipeline_example;
CREATE OR REPLACE PACKAGE BODY pipeline_example
IS
 FUNCTION base_query (argA IN VARCHAR2, argB IN VARCHAR2)
 RETURN resultset_typ
 IS
 o_resultset resultset_typ;
 BEGIN
 OPEN o_resultset FOR
 SELECT colC, colD, colE
 FROM some_table
 WHERE colA = ArgA AND colB = argB;
 RETURN o_resultset;
 END base_query;
 FUNCTION processor (
 p_source_data IN resultset_typ,
 p_limit_size IN PLS_INTEGER DEFAULT c_default_limit)
 RETURN table_typ
 PIPELINED
 PARALLEL_ENABLE(PARTITION p_source_data BY ANY)
 IS
 aa_source_data table_typ;-- := table_typ ();
 BEGIN
 LOOP
 FETCH p_source_data
 BULK COLLECT INTO aa_source_data
 LIMIT p_limit_size;
 EXIT WHEN aa_source_data.COUNT = 0;
 /* Process the batch of (p_limit_size) records... */
 FOR i IN 1 .. aa_source_data.COUNT
 LOOP
 PIPE ROW (aa_source_data (i));
 END LOOP;
 END LOOP;
 CLOSE p_source_data;
 RETURN;
 END processor;
 PROCEDURE with_pipeline (argA IN VARCHAR2,
 argB IN VARCHAR2,
 o_resultset OUT resultset_typ)
 IS
 BEGIN
 OPEN o_resultset FOR
 SELECT /*+ PARALLEL(t, 5) */ colC,
 SUM (CASE WHEN colD > colE AND colE != '0' THEN colD / ColE END)de,
 SUM (CASE WHEN colE > colD AND colD != '0' THEN colE / ColD END)ed,
 SUM (CASE WHEN colD = colE AND colD != '0' THEN '1' END) de_one,
 SUM (CASE WHEN colD = '0' OR colE = '0' THEN '0' END) de_zero
 FROM TABLE (processor (base_query (argA, argB),100)) t
 GROUP BY colC
 ORDER BY colC
 END with_pipeline;
 PROCEDURE no_pipeline (argA IN VARCHAR2,
 argB IN VARCHAR2,
 o_resultset OUT resultset_typ)
 IS
 BEGIN
 OPEN o_resultset FOR
 SELECT colC,
 SUM (CASE WHEN colD > colE AND colE != '0' THEN colD / ColE END)de,
 SUM (CASE WHEN colE > colD AND colD != '0' THEN colE / ColD END)ed,
 SUM (CASE WHEN colD = colE AND colD != '0' THEN 1 END) de_one,
 SUM (CASE WHEN colD = '0' OR colE = '0' THEN '0' END) de_zero
 FROM (SELECT colC, colD, colE
 FROM some_table
 WHERE colA = ArgA AND colB = argB)
 GROUP BY colC
 ORDER BY colC;
 END no_pipeline;
END pipeline_example;
ALTER PACKAGE pipeline_example COMPILE;Edited by: Earthlink on Nov 14, 2010 9:47 AM
Edited by: Earthlink on Nov 14, 2010 11:31 AM
Edited by: Earthlink on Nov 14, 2010 11:32 AM
Edited by: Earthlink on Nov 20, 2010 12:04 PM
Edited by: Earthlink on Nov 20, 2010 12:54 PM

Earthlink wrote:
Contrary to my understanding, the with_pipeline procedure runs 6 time slower than the legacy no_pipeline procedure. Am I missing something? Well, we're missing a lot here.
Like:
- a database version
- how did you test
- what data do you have, how is it distributed, indexed
and so on.
If you want to find out what's going on then use a TRACE with wait events.
All nessecary steps are explained in these threads:
HOW TO: Post a SQL statement tuning request - template posting
http://oracle-randolf.blogspot.com/2009/02/basic-sql-statement-performance.html
Another nice one is RUNSTATS:
http://asktom.oracle.com/pls/asktom/ASKTOM.download_file?p_file=6551378329289980701

Performance issues with version enable partitioned tables?

Hi all,
Are there any known performance issues with version enable partitioned tables?
Ive been doing some performance testes with a large version enable partitioned table and it seems that OCB optimiser is choosing very expensive plans during merge operations.
Tanks in advance,
Vitor
Example:
 Object Name Rows Bytes Cost Object Node In/Out PStart PStop
UPDATE STATEMENT Optimizer Mode=CHOOSE 1 249
UPDATE SIG.SIG_QUA_IMG_LT
NESTED LOOPS SEMI 1 266 249
PARTITION RANGE ALL 1 9
TABLE ACCESS FULL SIG.SIG_QUA_IMG_LT 1 259 2 1 9
VIEW SYS.VW_NSO_1 1 7 247
NESTED LOOPS 1 739 247
NESTED LOOPS 1 677 247
NESTED LOOPS 1 412 246
NESTED LOOPS 1 114 244
INDEX RANGE SCAN WMSYS.MODIFIED_TABLES_PK 1 62 2
INDEX RANGE SCAN SIG.QIM_PK 1 52 243
TABLE ACCESS BY GLOBAL INDEX ROWID SIG.SIG_QUA_IMG_LT 1 298 2 ROWID ROW L
INDEX RANGE SCAN SIG.SIG_QUA_IMG_PKI$ 1 1
INDEX RANGE SCAN WMSYS.WM$NEXTVER_TABLE_NV_INDX 1 265 1
INDEX UNIQUE SCAN WMSYS.MODIFIED_TABLES_PK 1 62
/* Formatted on 2004/04/19 18:57 (Formatter Plus v4.8.0) */
UPDATE /*+ USE_NL(Z1) ROWID(Z1) */sig.sig_qua_img_lt z1
SET z1.nextver =
SYS.ltutil.subsversion
(z1.nextver,
SYS.ltutil.getcontainedverinrange (z1.nextver,
'SIG.SIG_QUA_IMG',
'NpCyPCX3dkOAHSuBMjGioQ==',
4574,
4575
4574
WHERE z1.ROWID IN (
(SELECT /*+ ORDERED USE_NL(T1) USE_NL(T2) USE_NL(J2) USE_NL(J3)
INDEX(T1 QIM_PK) INDEX(T2 SIG_QUA_IMG_PKI$)
INDEX(J2 WM$NEXTVER_TABLE_NV_INDX) INDEX(J3 MODIFIED_TABLES_PK) */
t2.ROWID
FROM (SELECT /*+ INDEX(WM$MODIFIED_TABLES MODIFIED_TABLES_PK) */
UNIQUE VERSION
FROM wmsys.wm$modified_tables
WHERE table_name = 'SIG.SIG_QUA_IMG'
AND workspace = 'NpCyPCX3dkOAHSuBMjGioQ=='
AND VERSION > 4574
AND VERSION <= 4575) j1,
sig.sig_qua_img_lt t1,
sig.sig_qua_img_lt t2,
wmsys.wm$nextver_table j2,
(SELECT /*+ INDEX(WM$MODIFIED_TABLES MODIFIED_TABLES_PK) */
UNIQUE VERSION
FROM wmsys.wm$modified_tables
WHERE table_name = 'SIG.SIG_QUA_IMG'
AND workspace = 'NpCyPCX3dkOAHSuBMjGioQ=='
AND VERSION > 4574
AND VERSION <= 4575) j3
WHERE t1.VERSION = j1.VERSION
AND t1.ima_id = t2.ima_id
AND t1.qim_inf_esq_x_tile = t2.qim_inf_esq_x_tile
AND t1.qim_inf_esq_y_tile = t2.qim_inf_esq_y_tile
AND t2.nextver != '-1'
AND t2.nextver = j2.next_vers
AND j2.VERSION = j3.VERSION))

Hello Vitor,
There are currently no known issues with version enabled tables that are partitioned. The merge operation may need to access all of the partitions of a table depending on the data that needs to be moved/copied from the child to the parent. This is the reason for the 'Partition Range All' step in the plan that you provided. The majority of the remaining steps are due to the hints that have been added, since this plan has provided the best performance for us in the past for this particular statement. If this is not the case for you, and you feel that another plan would yield better performance, then please let me know and I will take a look at it.
One suggestion would be to make sure that the table was been recently analyzed so that the optimizer has the most current data about the table.
Performance issues are very hard to fix without a reproducible test case, so it may be advisable to file a TAR if you continue to have significant performance issues with the mergeWorkspace operation.
Thank You,
Ben

Issue with table in Dashboard

Hi People,
I am facing an issue with a table which is acting up in the Infoview.
In my Dashboard I have a table, when i run the dashboard using the Xcelsius the table is ok,
but when i export it and run through the infoview, the table gets bigger than should be.
Does anyone know how to solve this issue ? Is it something that i have missed to configure
in the Xcelsius or something like that ?
Best Regards,
Jordan
Edited by: Jordan Silva on Sep 15, 2010 2:54 PM

I have done Quiet a dashboard's but never faced this issue before...I problem i used to get is During image component ,if dont not resize that it will be bigger than the orginal
I.g Click on image component and If First Check box is not checked image will be bigger.
Never faced this with tables...

Issue with the partialTrigger on ADF Table

Jdeveloper Version 11.1.2.3.0
I have replicated issue with partialTrigger on the table component. Sample application can be downloaded from here . It needs HR schema to run.
In below sample pageFragment, I can try refreshing adf table in two ways
1. Set addEmployee button's id in partialTrigger of ADFTable component.
2. Set addEmployee button's id in partialTrigger of PanelBox component.
Note the difference - 1st one doesn't work where as 2nd works fine. Do we have any additional constraints when refreshing ADF table using
partialTrigger ?
I replicated the usecase in below example :
PageFragment Structure -
PanelBox
|
|__ ADF Table
|
|__toolbar facet
|
|__ addEmployee button
PageFragment Code
<af:panelBox text="PanelBox2" id="pb1">
<f:facet name="toolbar">
<af:commandButton actionListener="#{bindings.addEmployee.execute}" text="addEmployee2"
disabled="#{!bindings.addEmployee.enabled}" id="cb1" partialSubmit="true"/>
</f:facet>
<af:table value="#{bindings.EmployeesView1.collectionModel}" var="row" rows="#{bindings.EmployeesView1.rangeSize}"
emptyText="#{bindings.EmployeesView1.viewable ? 'No data to display.' : 'Access Denied.'}"
fetchSize="#{bindings.EmployeesView1.rangeSize}" rowBandingInterval="0"
selectedRowKeys="#{bindings.EmployeesView1.collectionModel.selectedRow}"
selectionListener="#{bindings.EmployeesView1.collectionModel.makeCurrent}" rowSelection="single" id="t1"
displayRow="selected" partialTriggers="::cb1" styleClass="AFStretchWidth">
<af:column sortProperty="#{bindings.EmployeesView1.hints.EmployeeId.name}" sortable="false"
headerText="#{bindings.EmployeesView1.hints.EmployeeId.label}" id="c1">
<af:inputText value="#{row.bindings.EmployeeId.inputValue}"
label="#{bindings.EmployeesView1.hints.EmployeeId.label}"
required="#{bindings.EmployeesView1.hints.EmployeeId.mandatory}"
columns="#{bindings.EmployeesView1.hints.EmployeeId.displayWidth}"
maximumLength="#{bindings.EmployeesView1.hints.EmployeeId.precision}"
shortDesc="#{bindings.EmployeesView1.hints.EmployeeId.tooltip}" id="it1">
<f:validator binding="#{row.bindings.EmployeeId.validator}"/>
<af:convertNumber groupingUsed="false" pattern="#{bindings.EmployeesView1.hints.EmployeeId.format}"/>
</af:inputText>
</af:column>
<af:column sortProperty="#{bindings.EmployeesView1.hints.FirstName.name}" sortable="false"
headerText="#{bindings.EmployeesView1.hints.FirstName.label}" id="c2">
<af:inputText value="#{row.bindings.FirstName.inputValue}"
label="#{bindings.EmployeesView1.hints.FirstName.label}"
required="#{bindings.EmployeesView1.hints.FirstName.mandatory}"
columns="#{bindings.EmployeesView1.hints.FirstName.displayWidth}"
maximumLength="#{bindings.EmployeesView1.hints.FirstName.precision}"
shortDesc="#{bindings.EmployeesView1.hints.FirstName.tooltip}" id="it2">
<f:validator binding="#{row.bindings.FirstName.validator}"/>
</af:inputText>
</af:column>
<af:column sortProperty="#{bindings.EmployeesView1.hints.LastName.name}" sortable="false"
headerText="#{bindings.EmployeesView1.hints.LastName.label}" id="c3">
<af:inputText value="#{row.bindings.LastName.inputValue}"
label="#{bindings.EmployeesView1.hints.LastName.label}"
required="#{bindings.EmployeesView1.hints.LastName.mandatory}"
columns="#{bindings.EmployeesView1.hints.LastName.displayWidth}"
maximumLength="#{bindings.EmployeesView1.hints.LastName.precision}"
shortDesc="#{bindings.EmployeesView1.hints.LastName.tooltip}" id="it3">
<f:validator binding="#{row.bindings.LastName.validator}"/>
</af:inputText>
</af:column>
<af:column sortProperty="#{bindings.EmployeesView1.hints.DepartmentId.name}" sortable="false"
headerText="#{bindings.EmployeesView1.hints.DepartmentId.label}" id="c11">
<af:selectOneChoice value="#{row.bindings.DepartmentId.inputValue}" label="#{row.bindings.DepartmentId.label}"
required="#{bindings.EmployeesView1.hints.DepartmentId.mandatory}"
shortDesc="#{bindings.EmployeesView1.hints.DepartmentId.tooltip}" id="soc1">
<f:selectItems value="#{row.bindings.DepartmentId.items}" id="si1"/>
</af:selectOneChoice>
</af:column>
</af:table>
</af:panelBox>
Thanks,
Rajdeep

Hi Frank,
Indeed it worked. But I have two queries now :
1. We are adding employee record using a method called through method action Binding. So shouldn't the bindings be aware of the same .. i mean sychonization of binding layer should happen when method action binding is used ?
2. Why it works when i apply partialTrigger on panelBox ? Why "employeesViewImpl" code is not required when I apply partialTrigger on panelBox ? Is it a concept that iterator is reexecuted when you refresh parent component ?
Thanks,
Rajdeep

CS4: Table issues with MSIE8.0

Similar Messages

Maybe you are looking for