CS4 transitions - how to apply fade/zoom for memorial photo montage - please help

I'm considering doing a photo-only montage for a relative's memorial if I can figure out how to get the look I'm wanting. I want to apply a slow cross zoom AND a fade both, but it looks like I can only do one at a time. How do I apply both of these transitions at once? Or is there another way I can get the look I'm wanting? Any tips or links you may have that would help point me in the direction I'm wanting to go would be greatly, greatly appreciated. Thank you.

Thank you I think you've pointed me in the right direction. Please forgive me for my ignorance as I have just begun using this program. I don't have all the official terms down yet, such as "key frame", so I'll try to explain the best I can what I've done so far. On the timeline, I've got the yellow line on the image and I can click on a dot and drag one end of the line down so that it's diagonal, but it won't stretch across the following image. Is there any way to have the line stretch across all images and add those little dots (are those key frames?) wherever I please? I apologize if this made no sense whatsoever. I just want to fade out one picture and then fade in the following picture using this opacity effect you mentioned. Thank you very much for your time.

Similar Messages

Zoom for memorial photo montage

Thank you in advance for your help. Can someone send me some easy steps on how do I zoom in and out on photos in Premiere CS4?
example, the photo is 5 seconds long, I want to zoom in or out on him not just use the zoom from photo to photo.
I dear freinds 25 year old son passed away and I am under the gun to help them get this done for a funeral.
I have used the old premier but cant seem to find it here.
Thanks, Eric

Jim might know of some tutorial to look at...but just to show you quickly what it will look like...
1) use a photo that is no bigger than 4000 px X 4000 px.....
2) put on timeline
3) use CTI to determine start point for zoom and click "scale" under effect panel (sets keyframe) under motion /scale...
4) adjust scale from 100% to what you want...
5) move CTI to next point on timeline where effect will end
6) click scale again (sets keyframe)
7) adjust scale
done
image shows timeline and keyframes in effect panel where scale was adjusted
This link has the movie export made from this sample...called " zoom sample mov " ....for you to SEE what it does
http://rodneybauer.com/whiteboard3.htm

I put photos from my laptop into my iphone,now I can't delete them. There is no trash can on the screen,but there is for other photos. Please help.

I added photos from my laptop onto my iphone 4s,now I can't delete them. There is no trash can for these photos,but there is for others. What have I done?

Sounds like you used iTunes to sync them to your phone. You will need to use iTunes to unsync them - they can't be deleted on the phone.
~Lyssa

How to apply FADE to audio track

Just moved to use Logic Pro 8 that I have the following queries:-
1. How to apply FADE/CROSSFADE on audio tracks at the Arrange window?
2. I found keeping to click the Pointer tool & Scissor tool (or Eraser) alternately (the purpose is just delete a part of an audio track) at the Arrange window during audio editing very clumsy, is there any shortcut?
3. I use a MOTU 2408 audio interface, is there anyway I could set the Logic to having:- A. just one mono output instead of stereo pair ( likes 12, 34, 56, or 78) for a track? B. input of a stereo track set to using S/PDIF as my 2408 have this and I sometimes dump things into the computer from a DAT player?
Thank you for your advise.

NNS wrote:
1. How to apply FADE/CROSSFADE on audio tracks at the Arrange window?
You can use the fade tool, or for multiple regions, simply select the regions (you can rubberband them), and use the fade tool box in the upper left hand corner of the arrange page.
NNS wrote:
2. I found keeping to click the Pointer tool & Scissor tool (or Eraser) alternately (the purpose is just delete a part of an audio track) at the Arrange window during audio editing very clumsy, is there any shortcut?
Look over the extensive list of key commands that are available within Logic. You can also assign alternate tools to left/right mouse buttons, or by modifier keys, so you can switch tools quickly, without the need for accessing the toolbox.
NNS wrote:
3. I use a MOTU 2408 audio interface, is there anyway I could set the Logic to having:- A. just one mono output instead of stereo pair ( likes 12, 34, 56, or 78) for a track?
For mono output assignments, simply pan the mono track to the desired side of the output. i.e., track one, set to "Output 1-2", panned hard LEFT, will only appear on your audio interfaces output 1. Panned hard RIGHT, it'll appear only on output 2...
NNS wrote:
B. input of a stereo track set to using S/PDIF as my 2408 have this and I sometimes dump things into the computer from a DAT player?
All audio interfaces with SPDIF inputs have those inputs hardwired. So it's just a matter of you reading the MOTU manual, and seeing what that is. It may be inputs 11-12, or 23-24, etc... Just set the stereo track in Logic to have that particular input, and you should be set.

How do I create motion for still photos/pictures. I'd like to pan/scan & zoom. Please help!

How do I create motion for still photos/pictures. I'd like to pan/scan & zoom. Please help!

You kind of answered your own question..
Check out Motion in the FX Control Window and learn how keyframing works..

Hi how to apply Chronological sort for a month column?

Hi All,
I am struck with how to apply Chronological sort for a month column that contains values like January, February, March, April, May, June.... December. If we apply normal sorting then we can arrange the column values either in ascending order or descending order. But i want the column values to be in this format like jan, feb, mar,apr....dec. Is it possible???
If this is possible then pls tell me the way in a step wise manner for my better understanding..
Thanks in Advance
Thenmozhi

Hi Deva,
I tried with the below formula :
CASE WHEN
"Order Booked Date Calendar"."Full Month Name (Order Booked)"='January' THEN 1 WHEN
"Order Booked Date Calendar"."Full Month Name (Order Booked)"='February' THEN 2 WHEN
"Order Booked Date Calendar"."Full Month Name (Order Booked)"='March' THEN 3 WHEN
"Order Booked Date Calendar"."Full Month Name (Order Booked)"='April' THEN 4 WHEN
"Order Booked Date Calendar"."Full Month Name (Order Booked)"='May' THEN 5 WHEN
"Order Booked Date Calendar"."Full Month Name (Order Booked)"='June' THEN 6 WHEN
"Order Booked Date Calendar"."Full Month Name (Order Booked)"='July' THEN 7 WHEN
"Order Booked Date Calendar"."Full Month Name (Order Booked)"='August' THEN 8 WHEN
"Order Booked Date Calendar"."Full Month Name (Order Booked)"='September' THEN 9 WHEN
"Order Booked Date Calendar"."Full Month Name (Order Booked)"='October' THEN 10 WHEN
"Order Booked Date Calendar"."Full Month Name (Order Booked)"='November' THEN 11 WHEN
"Order Booked Date Calendar"."Full Month Name (Order Booked)"='December' THEN 12 ELSE '' END
But it is showing the error like this:
Error Details
Error Codes: OPR4ONWY:U9IM8TAC:OI2DL65P
State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 43113] Message returned from OBIS. [nQSError: 43119] Query Failed: [nQSError: 17001] Oracle Error code: 604, message: ORA-00604: error occurred at recursive SQL level 1 ORA-06502: PL/SQL: numeric or value error: character string buffer too small ORA-06512: at line 8 ORA-00932: inconsistent datatypes: expected NUMBER got CHAR at OCI call OCIStmtExecute. [nQSError: 17010] SQL statement preparation failed. (HY000)
What it is problem? Please help me...
Thanks

How to apply List box for multiple selection of rows in ALV report ?

Hi Exprots,
1: How to apply List box for multiple selection of rows in ALV report ?
Thanking you.
Subash

hi,
check the below program.
REPORT zalv_dropdowns.
*Type pools declarations for ALV
TYPE-POOLS : slis.
*data declarations for ALV container,ALV grid, Fieldcatalogues & layout
DATA: g_grid TYPE REF TO cl_gui_alv_grid,
      g_custom_container TYPE REF TO cl_gui_custom_container,
      gt_fieldcat TYPE lvc_t_fcat,
      gs_layout TYPE lvc_s_layo.*INTERNAL TABLE AND WA DECLARATIONS FOR t517 A table
DATA: gt_outtab TYPE STANDARD TABLE OF t517a INITIAL SIZE 0,
      wa_outtab TYPE t517a.
START-OF-SELECTION.*Call to ALV
CALL SCREEN 600.*On this statement double click it takes you to the screen painter SE51.
*Create a Custom container and name it CCONT and OK code as OK_CODE.
*Save check and Activate the screen painter.
*Now a normal screen with number 600 is created which holds the ALV grid.
PBO of the actual screen , Here we can give a title and customized menus
Here we also call the subroutine for ALV output.
      MODULE PBO OUTPUT                                             *
MODULE pbo OUTPUT.
PERFORM alv_output.
ENDMODULE.                    "pbo OUTPUT
      MODULE PAI INPUT                                              *
MODULE pai INPUT.
ENDMODULE.                    "pai INPUT
*&      Form BUILD_FIELDCAT
FORM build_fieldcat.
DATA ls_fcat TYPE lvc_s_fcat.
*Build the field catalogue
CALL FUNCTION 'LVC_FIELDCATALOG_MERGE'
    EXPORTING
      i_structure_name = 'T517A'
    CHANGING
      ct_fieldcat      = gt_fieldcat.
To assign dropdown in the fieldcataogue
LOOP AT gt_fieldcat INTO ls_fcat.
CASE ls_fcat-fieldname.
   WHEN 'SLART'.
*is the first list box
        ls_fcat-drdn_hndl = '1'.
        ls_fcat-outputlen = 15.
        MODIFY gt_fieldcat FROM ls_fcat.
is the second list box
WHEN 'ABART'.
        ls_fcat-drdn_hndl = '2'.
        ls_fcat-outputlen = 15.
        MODIFY gt_fieldcat FROM ls_fcat.
ENDCASE.
ENDLOOP.
ENDFORM.                    "build_fieldcat
*&      Form ALV_OUTPUT
FORM alv_output .*Create object for container
CREATE OBJECT g_custom_container
         EXPORTING container_name = 'CCONT'.
*create object for grid
CREATE OBJECT g_grid
         EXPORTING i_parent = g_custom_container.
Build fieldcat and set column
*Assign a handle for the dropdown listbox.
PERFORM build_fieldcat.
*Build layout
PERFORM build_layout.
Define a drop down table.
PERFORM dropdown_table.
*fetch values from the T517A table
SELECT * FROM t517a INTO TABLE gt_outtab.
*Display ALV output
CALL METHOD g_grid->set_table_for_first_display
    EXPORTING
      is_layout       = gs_layout
    CHANGING
      it_fieldcatalog = gt_fieldcat
      it_outtab       = gt_outtab.ENDFORM.                               "ALV_OUTPUT
*&      Form dropdown_table
      text
--> p1        text
<-- p2        text
FORM dropdown_table.*Declarations for drop down lists in ALV.
DATA: lt_dropdown TYPE lvc_t_drop,
        ls_dropdown TYPE lvc_s_drop.
First SLART listbox (handle '1').
ls_dropdown-handle = '1'.
ls_dropdown-value = '01 Primary school'.
APPEND ls_dropdown TO lt_dropdown. ls_dropdown-handle = '1'.
ls_dropdown-value = '02 Lower Secondary'.
APPEND ls_dropdown TO lt_dropdown. ls_dropdown-handle = '1'.
ls_dropdown-value = '03 Upper Secondary'.
APPEND ls_dropdown TO lt_dropdown.
ls_dropdown-handle = '1'.
ls_dropdown-value = '04 Professional School'.
APPEND ls_dropdown TO lt_dropdown.
ls_dropdown-handle = '1'.
ls_dropdown-value = '05 College'.
APPEND ls_dropdown TO lt_dropdown.
ls_dropdown-handle = '1'.
ls_dropdown-value = '06 University'.
APPEND ls_dropdown TO lt_dropdown.
ls_dropdown-handle = '1'.
ls_dropdown-value = '09 Other Establishment'.
APPEND ls_dropdown TO lt_dropdown.* Second ABART listbox (handle '2'). ls_dropdown-handle = '2'.
ls_dropdown-value = '10 Primary School certificate'.
APPEND ls_dropdown TO lt_dropdown.
ls_dropdown-handle = '2'.
ls_dropdown-value = '20 Lower secondary/Junior high'.
APPEND ls_dropdown TO lt_dropdown. ls_dropdown-handle = '2'.
ls_dropdown-value = '30 High school diploma(B-levels)'.
APPEND ls_dropdown TO lt_dropdown.
ls_dropdown-handle = '2'.
ls_dropdown-value = '31 Vocational'.
APPEND ls_dropdown TO lt_dropdown. ls_dropdown-handle = '2'.
ls_dropdown-value = '32 Matriculation'.
APPEND ls_dropdown TO lt_dropdown. ls_dropdown-handle = '2'.
ls_dropdown-value = '40 Specialist vocational certificate'.
APPEND ls_dropdown TO lt_dropdown. ls_dropdown-handle = '2'.
ls_dropdown-value = '50 College degree Level1'.
APPEND ls_dropdown TO lt_dropdown. ls_dropdown-handle = '2'.
ls_dropdown-value = '51 College degree Level2'.
APPEND ls_dropdown TO lt_dropdown. ls_dropdown-handle = '2'.
ls_dropdown-value = '52 Masters degree'.
APPEND ls_dropdown TO lt_dropdown. ls_dropdown-handle = '2'.
ls_dropdown-value = '60 Univ Degree level1'.
APPEND ls_dropdown TO lt_dropdown. ls_dropdown-handle = '2'.
ls_dropdown-value = '61 Bachelors degree'.
APPEND ls_dropdown TO lt_dropdown. ls_dropdown-handle = '2'.
ls_dropdown-value = '62 Masters degree'.
APPEND ls_dropdown TO lt_dropdown. ls_dropdown-handle = '2'.
ls_dropdown-value = '63 Licenciate'.
APPEND ls_dropdown TO lt_dropdown. ls_dropdown-handle = '2'.
ls_dropdown-value = '64 Doctors Degree Ph.D'.
APPEND ls_dropdown TO lt_dropdown. ls_dropdown-handle = '2'.
ls_dropdown-value = '89 None'.
APPEND ls_dropdown TO lt_dropdown. ls_dropdown-handle = '2'.
ls_dropdown-value = '90 Unknown'.
APPEND ls_dropdown TO lt_dropdown.*method to display the dropdown in ALV
CALL METHOD g_grid->set_drop_down_table
    EXPORTING
      it_drop_down = lt_dropdown.ENDFORM.                               " dropdown_table
*&      Form build_layout
      text
*layout for ALV output
FORM build_layout . gs_layout-cwidth_opt = 'X'.
gs_layout-grid_title = 'ALV DROPDOWN LISTS'.
gs_layout-no_toolbar = 'X'.ENDFORM.                    " build_layout
endform.
Edited by: S.r.v.r.Kumar on Jun 1, 2009 2:48 PM

How to apply sap license for Sap Netweaver AS Java

Hello guys,
May i know how to apply sap license for SAP Netweaver AS Java? Appreciate the reply, thank you
regards,
wei how

Hi Lee,
check below link:
http://help.sap.com/saphelp_nwce10/helpdata/en/9f/5e533e5ff4d064e10000000a114084/content.htm
Thanks
sunny

After updating my Macbook Pro retina display to os x yosemite 10.10.2, the mause and track pad locks, and do not respond especially when using the Mac for a long period, please help, how can I solve this, I do not like feel like in windows, so I paid

after updating my Macbook Pro retina display to os x yosemite 10.10.2, the mause and track pad locks, and do not respond especially when using the Mac for a long period, please help, how can I solve this, I do not like feel like in windows, so I paid good money for this mack, I feel calm

Hi Buterem,
I'm sorry to hear you are having issues with your MacBook Pro since your recent Yosemite update. I also apologize, I'm a bit unclear on the exact nature of the issue you are describing. If you are having intermittent but persistent responsiveness issues with your mouse or trackpad, you may want to try using Activity Monitor to see if these incidents correspond to occupied system resources, especially system memory or CPU. You may find the following article helpful:
How to use Activity Monitor - Apple Support
If the entire system hangs or locks up (for example, if the system clock freezes and stops counting up), you may also be experiencing some variety of Kernel Panic. If that is the case, you may also find this article useful:
OS X: When your computer spontaneously restarts or displays "Your computer restarted because of a problem." - Apple Support
Regards,
- Brenden

I reset my phone and it now receives calls that were meant for my husband. I know how to fix this with messaging and facetime, but can't seem to find how to make it stop with the calls. Please help.

I reset my phone and it now receives calls that were meant for my husband. I know how to fix this with messaging and facetime, but can't seem to find how to make it stop with the calls. Please help.

It may be due to Continuity
The following quote is from Connect your iPhone, iPad, and iPod touch using Continuity
Turn off iPhone cellular calls
To turn off iPhone Cellular Calls on a device, go to Settings > FaceTime and turn off iPhone Cellular Calls.

My wife got a Iphone in Bangladesh. she do not know the password for apple ID, there is no way to collect it, as the email id for that iphone is not her. how she can use application store and itunes? please help me

My wife got a Iphone in Bangladesh. she do not know the password for apple ID, there is no way to collect it, as the email id for that iphone is not her. how she can use application store and itunes? please help me

If it is second hand, try putting it in recovery mode, and restoring it with itunes on a mac or pc.
Recovery mode tutoral:http://www.youtube.com/watch?v=dkVr5CxFiFM

Fill screen with zoom for small photo sizes (as in slideshow)?

Front facing iPhone 4S camera sized photos are too small in iPhoto. Is it possible to set a default to fill screen with zoom for all photo sizes (as in slideshow)? Seems like the old iPhoto worked like this.

That's what I was afraid of! I wish it would still scale photos to fill the window also if they're smaller than the window size (not just 100%), like it used to in older versions of iPhoto. Especially irritating, since the problem photos are from an Apple product, the front facing camera of the iPhone4s. I already added my complaint to "feedback".
Thanks anyway.

I have purchased Production Premium CS4 Educational Version. Its serial number is not working. Please help...

I have purchased Production Premium CS4 Educational Version. Its serial number is not working. Please help...

If you recently purchased this then it is not likely to be a valid sale/purchase. Adobe does not sell older versions of their products and no one but Adobe provides student/teacher licensing. If you purchased this some time years ago and it is only recently that you find you are not able to reactivate it with the original serial number you can try contacting Adobe Support thru chat and see if they will be willing to work with you to resolve this.
For the link below click the Still Need Help? option in the blue area at the bottom and choose the chat option...
Serial number and activation chat support (non-CC)
http://helpx.adobe.com/x-productkb/global/service1.html ( http://adobe.ly/1aYjbSC )

I am using Adobe Pro 11 and on opening a pdf I am getting error 'Insufficient Data for an Image'. Please help and provide a workaround if the solution not there.

Hi all,
I am using Adobe Pro 11 and on opening a pdf I am getting error 'Insufficient Data for an Image'. Please help and provide a workaround if the solution not there.
I have already set the preferences to for page view to low zoom settings, and page fit view settings, but it never opens the pdf. Please check and provide a solution asap.
Thanks in advance!

Most of the documents have sensitive info on them. I will have to do some looking for some that i can share, but will get something to upload (dropbox) as soon as I can.
Thanks for you help.

I have not been able to update my fairy farm game for the last 5days as it quit at launch. I am afraid to delete and reinstall the game as i might lose all. Anyone knows if there is an update for this game? Please help. Thanks

I have not been able to update my fairy farm game for the last 5days as it quit at launch. I am afraid to delete and reinstall the game as i might lose all. Anyone knows if there is an update for this game? Please help. Thanks

Erdygirl please be aware you are posting to a public forum. I have removed your personal information from your previous post.
Please check your account at http://www.adobe.com/ to locate your serial number. You can find more information on how to locate your serial number at Find your serial number quickly - http://helpx.adobe.com/x-productkb/global/find-serial-number.html.

CS4 transitions - how to apply fade/zoom for memorial photo montage - please help

Similar Messages

Maybe you are looking for