CS4 Updater not working on Lion?

Hi all,
Not positive where this post goes in this massive Adobe forum... but since I use Photoshop the most, thought I'd try here first.
I have Adobe Web Design Premium CS4. I had been running it in Mac OSX Snow Leopard. I just changed hard drives, installed Mac OSX Lion, and completely re-installed CS4 on the new drive. (I DID remember to deactivate CS4 on the old hard drive).
So now I have the original version of CS4. I have tried to update CS4 to the most recent versions and the updater keeps telling me I already have the most recent version... though I don't. I have the x.0 version that came on the original disks. The updater updated various components of the software several times on the old drive, but now it thinks I am up to date with the new installation on the new drive.
Any help is appreciated.
Matt

Thanks, but the above was unavailable, as the install button would not show up. So having spent some hours on the internet trying to fix the problem I came across this: And it worked. CS4 / Dreamweaver etc running like a dream again. So if you are tempted by Lion, this might be of use for all those Adobe things you need to run! It was simple, and fixed all Adobe problems. (which is caused by Lion not having Java Runtime within it).
Google found this in a forum: ----- Java for 10.7 DP (Update from 13. May 2011): Java Essentials (http://swcdn.apple.com/content/downloads/02/23/041-0658/kqyFX3xLHm8TYcp7556rpkg6 cK3sXF6J55/JavaEssentials.pkg)
Java Runtime For Mac OS X 10.7 (http://swcdn.apple.com/content/downloads/02/23/041-0658/kqyFX3xLHm8TYcp7556rpkg6 cK3sXF6J55/JavaRuntimeForMacOSX10.7.pkg) Install both packages!
Source(s):
http://forums.macrumors.com/archive/index.php/t-1155253.html

Similar Messages

Updater Not Working (Mac Lion/CS6)

Hello,
My updater says I have updates, but my updater says this when I open it:
"Update Failed
Updates could not be applied
You are running the Adobe Application Manager. Please close all instances of Adobe Application Manager before applying updates.
If the problems persist, please contact Customer Support for further assistance."
It doesn't give me an error number or anything, and I don't have two versions running. Anyone know how to fix this?
Thanks,
Aaron

This just now happened to me too and I also thought I never had two versions running. I ended up seeing two application managers running at the same time so I closed the application manager not giving me that message and it worked. You are completely sure that there aren't two instances running at the same time? I don't think you would be getting the error otherwise. If it doesn't show it on the dock, click on the Apple symbol and click Force Quit.... If you click on that it will give you a list of apps to force close. If that doesn't work, try restarting the computer. If it doesn't work beyond that then I don't know.

Problem description: mac mail not opening, software updates not working, app store not opening. imac osx 10.9.5

Problem description:
mac mail not opening, software updates not working, app store not opening. 10.9.5
EtreCheck version: 2.0.11 (98)
Report generated 1 December 2014 16:51:49 CET
Hardware Information: ℹ️
iMac (21.5-inch, Late 2009) (Verified)
iMac - model: iMac10,1
1 3.06 GHz Intel Core 2 Duo CPU: 2-core
12 GB RAM Upgradeable
BANK 0/DIMM0
4 GB DDR3 1067 MHz ok
BANK 1/DIMM0
4 GB DDR3 1067 MHz ok
BANK 0/DIMM1
2 GB DDR3 1067 MHz ok
BANK 1/DIMM1
2 GB DDR3 1067 MHz ok
Bluetooth: Old - Handoff/Airdrop2 not supported
Wireless: en1: 802.11 a/b/g/n
Video Information: ℹ️
NVIDIA GeForce 9400 - VRAM: 256 MB
iMac 1920 x 1080
BenQ GL2240 1920 x 1080 @ 60 Hz
System Software: ℹ️
OS X 10.9.5 (13F34) - Uptime: 1:32:17
Disk Information: ℹ️
WDC WD5000AAKS-40V2B0 disk0 : (500.11 GB)
S.M.A.R.T. Status: Verified
EFI (disk0s1) <not mounted> : 210 MB
Macintosh HD (disk0s2) / [Startup]: 499.25 GB (164.03 GB free)
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
HL-DT-ST DVDRW GA11N
USB Information: ℹ️
EPSON EPSON Epson Stylus S22 Series
Canon MX410 series
ASMedia AS2105 1 TB
S.M.A.R.T. Status: Verified
EFI (disk3s1) <not mounted> : 210 MB
Backup (disk3s2) /Volumes/Backup : 999.86 GB (506.24 GB free)
Apple Inc. Built-in iSight
Apple Internal Memory Card Reader 7.95 GB
S.M.A.R.T. Status: Verified
EOS_DIGITAL (disk1s1) /Volumes/EOS_DIGITAL : 7.94 GB (7.83 GB free)
Western Digital My Book 1140 2 TB
S.M.A.R.T. Status: Verified
EFI (disk2s1) <not mounted> : 210 MB
2TB (disk2s2) /Volumes/2TB : 2.00 TB (1.50 TB free)
Wacom Co.,Ltd. CTE-450
Contour Design ShuttlePRO v2
Apple Computer, Inc. IR Receiver
Apple Inc. BRCM2046 Hub
Apple Inc. Bluetooth USB Host Controller
Gatekeeper: ℹ️
Mac App Store and identified developers
Kernel Extensions: ℹ️
/Applications/Parallels Desktop.app
[not loaded] com.parallels.kext.hidhook (9.0 24217.979618) Support
[not loaded] com.parallels.kext.hypervisor (9.0 24217.979618) Support
[not loaded] com.parallels.kext.netbridge (9.0 24217.979618) Support
[not loaded] com.parallels.kext.usbconnect (9.0 24217.979618) Support
[not loaded] com.parallels.kext.vnic (9.0 24217.979618) Support
/Applications/Toast 10 Titanium/Toast Titanium.app
[not loaded] com.roxio.BluRaySupport (1.1.6) Support
/Library/Extensions
[loaded] at.obdev.nke.LittleSnitch (4052 - SDK 10.8) Support
[not loaded] xxx.qnation.PeerGuardian (1.1.9) Support
/System/Library/Extensions
[not loaded] com.FTDI.driver.FTDIUSBSerialDriver (2.2.18 - SDK 10.6) Support
[not loaded] com.pctools.iantivirus.kfs (1.0.1) Support
/Users/[redacted]/Library/Services/ToastIt.service/Contents/MacOS
[not loaded] com.roxio.TDIXController (2.0) Support
Startup Items: ℹ️
ParallelsDesktopTransporter: Path: /Library/StartupItems/ParallelsDesktopTransporter
WkSvMacX: Path: /Library/StartupItems/WkSvMacX
Startup items are obsolete and will not work in future versions of OS X
Launch Agents: ℹ️
[running] at.obdev.LittleSnitchUIAgent.plist Support
[not loaded] com.adobe.AAM.Updater-1.0.plist Support
[loaded] com.adobe.CS4ServiceManager.plist Support
[running] com.epson.epw.agent.plist Support
[loaded] com.oracle.java.Java-Updater.plist Support
Launch Daemons: ℹ️
[running] at.obdev.littlesnitchd.plist Support
[failed] com.adobe.fpsaud.plist Support
[loaded] com.adobe.versioncueCS4.plist Support
[loaded] com.barebones.textwrangler.plist Support
[running] com.cleverfiles.cfbackd.plist Support
[not loaded] com.gopro.stereomodestatus.plist Support
[loaded] com.microsoft.office.licensing.helper.plist Support
[loaded] com.oracle.java.Helper-Tool.plist Support
[loaded] com.oracle.java.JavaUpdateHelper.plist Support
[invalid?] com.tvmobili.tvmobilisvcd.plist Support
[loaded] fi.polar.libpolar.plist Support
[running] fi.polar.polard.plist Support
[failed] xxx.qnation.PeerGuardian.kextload.plist Support
User Launch Agents: ℹ️
[loaded] com.adobe.ARM.[...].plist Support
[loaded] com.facebook.videochat.[redacted].plist Support
[loaded] com.google.keystone.agent.plist Support
[loaded] com.macpaw.CleanMyMac.helperTool.plist Support
[loaded] com.macpaw.CleanMyMac.trashSizeWatcher.plist Support
[running] com.macpaw.CleanMyMac.volumeWatcher.plist Support
[invalid?] com.plexapp.helper.plist Support
[not loaded] com.spotify.webhelper.plist Support
User Login Items: ℹ️
Garmin Express Service Application (/Applications/Garmin Express.app/Contents/Library/LoginItems/Garmin Express Service.app)
SmartDaemon Application (/Library/Application Support/CleverFiles/SmartDaemon.app)
SilverKeeper Scheduler ApplicationHidden (/Applications/SilverKeeper.app/Contents/Resources/SilverKeeper Scheduler.app)
Dropbox Application (/Applications/Dropbox.app)
Garmin ANT Agent UNKNOWN (missing value)
Internet Plug-ins: ℹ️
DirectorShockwave: Version: 11.5.7r609 Support
Google Earth Web Plug-in: Version: 6.1 Support
Default Browser: Version: 537 - SDK 10.9
Flip4Mac WMV Plugin: Version: 3.2.0.16   - SDK 10.8 Support
PandoWebInst: Version: 1.0 Support
AdobePDFViewerNPAPI: Version: 10.1.12 Support
FlashPlayer-10.6: Version: 15.0.0.189 - SDK 10.6 Support
DivXBrowserPlugin: Version: 2.0 Support
Silverlight: Version: 5.1.10411.0 - SDK 10.6 Support
Flash Player: Version: 15.0.0.189 - SDK 10.6 Mismatch! Adobe recommends 15.0.0.239
iPhotoPhotocast: Version: 7.0 - SDK 10.8
QuickTime Plugin: Version: 7.7.3
SharePointBrowserPlugin: Version: 14.0.0 Support
AdobePDFViewer: Version: 10.1.12 Support
GarminGpsControl: Version: 4.2.0.0 - SDK 10.8 Support
JavaAppletPlugin: Version: Java 7 Update 71 Check version
User Internet Plug-ins: ℹ️
fbplugin_1_0_3: Version: (null) Support
Safari Extensions: ℹ️
Open in Internet Explorer
Audio Plug-ins: ℹ️
DVCPROHDAudio: Version: 1.3.2
3rd Party Preference Panes: ℹ️
Adobe Version Cue CS4 Support
DivX Support
Flash Player Support
Flip4Mac WMV Support
GoPro Support
Growl Support
Java Support
MacFUSE Support
MenuMeters Support
Perian Support
Time Machine: ℹ️
Skip System Files: NO
Auto backup: NO - Auto backup turned off
Destinations:
Back Up [Local]
Total size: 0 B
Total number of backups: 0
Oldest backup: -
Last backup: -
Size of backup disk: Excellent
Backup size 0 B > (Disk size 0 B X 3)
Top Processes by CPU: ℹ️
      12% Google Chrome
      12% WindowServer
      4% Dock
      2% Little Snitch Agent
      2% SystemUIServer
Top Processes by Memory: ℹ️
399 MB iTunes
322 MB mds_stores
216 MB Google Chrome Helper
193 MB Google Chrome
155 MB com.apple.IconServicesAgent
Virtual Memory Information: ℹ️
6.64 GB Free RAM
3.51 GB Active RAM
1.36 GB Inactive RAM
1.11 GB Wired RAM
1.91 GB Page-ins
0 B Page-outs

[not loaded] com.pctools.iantivirus.kfs (1.0.1) Support
Un-install according to the developer's un-install instructions.
You do not need to use cleaning programs. They can destroy your computer operation as they may already have done.
CleanMyMac - Uninstall
CleanMyMac2 Un-install
After un-installing, run this program to make sure you got all the pieces.
EasyFind – Spotlight Replacement
Do a backup.
Go to Finder and select your user/home folder. With that Finder window as the front window, either select Finder/View/Show View options or go command - J. When the View options opens, check ’Show Library Folder’. That should make your user library folder visible in your user/home folder. Select Library. Then go to Preferences/com.apple.appstore.plist. Move the .plist to your desktop.
Restart, open the application and test. If it works okay, delete the plist from the desktop.
If the application is the same, return the .plist to where you got it from, overwriting the newer one.
Thanks to leonie for some information contained in this.

Ukelele generated custom keyboard layouts not working in Lion?

I asked this question in the stackexchange site a few days ago. Nothing I've tried has worked so far, except for creating a new account. Because a fresh account works, it's got to be something with my preferences, right?
http://apple.stackexchange.com/questions/21691/ukelele-generated-custom-keyboard -layouts-not-working-in-lion
Here's the question from above:
I created a custom keyboard layout with Ukelele (http://scripts.sil.org/ukelele) in Snow Leopard (idea is to generate scandinavian letters with Alt-key, otherwise have a pretty much standard U.S. layout). After the upgrade, the old installed (to ~/Library/Keyboard Layouts) layout wasn't working.
Ukelele seems to work OK in Lion, but whether I put the generated keylayout in a bundle or single file, or save it "/Library/Keyboard Layouts" or "~/Library/Keyboard Layouts" doesn't seem to matter.
Help?
EDIT:
@Sergio, I cannot choose the layout in Input Sources. One keylayout file I tried:http://semeai.org/~sjl/us-scands.keylayout
[EDIT: Removed unrelated stuff]
UPDATE 2011/08/15:
@Tom:
Copied your keylayout (it naturally ended up in my Junk folder):
midgard (01:55) >ls -l ~/Library/Keyboard\ Layouts/MongolianQWERTY.keylayout-rw-r--r--@ 1 sjl staff 44536 Mar 13 2008 /Users/sjl/Library/Keyboard Layouts/MongolianQWERTY.keylayout
Logged out, logged in, isn't showing in Input sources (I'm looking very closely between "Maori" and "Myanmar - QWERTY").
I've also uninstalled bunch of software and plugins giving suspicious messages to system.log, but hasn't helped.
UPDATE 2011/08/16:
I created a test account, and lo, the layout works perfectly for it. Also the bug in preferences doesn't show for that account. When trying this on my own account, there are no errors in Console logs with the suggested keywords (I can't seem to locate console.log file, though).
UPDATE 2011/08/16 later:
Nuking Library/Caches (and relogging) didn't help.
UPDATE 2011/08/17:
I did
% find Library -name "*.plist" -exec mv {} {}.renamed \;
and restarted, but it didn't help. I restored the situation with
% for file in `find Library -name "*.plist.renamed"`; \ do mv "$file" "${file//.renamed/}"; done
addendum: I also went through all the .plist files with plutil -s as described inhttp://www.askdavetaylor.com/can_i_check_my_plist_files_in_mac_os_x_for_problems .html. There was some brokennes, but in very unrelated applications.

Tom,
I think I love you.
That absolutely did it! Thanks so much!
If you'll answer with the same link in the stackexchange site, I'll mark the answer as correct, so you'll get the rep there.
Thanks,
Sami

Wish I would have known Quicken 2007 would not work under Lion OS. I had no reason to believe it wouldn't. Any ideas for me?

Wish I would have known Quicken 2007 would not work under Lion OS. I had no reason to believe it wouldn't. Any ideas for me?

I switched to Essentials while using Snow Leopard in anticipation. Data conversion was pretty good. Nothing critical was lost, but I did have to reassign some budget catergories for past transactions. It was a good opportunity for some cleaning up that I should have done anyway. They have a 60-day return policy on the Quicken web site which was key to my purchase decision.
I am not affiliated with Quicken in any way other than as a customer. I'd have preferred it if they had updated 2007 but they didn't!

Security and privacy system preferences not working after Lion install. What to do?

Security and privacy system preference not working after Lion install. Not sure if it happen with Lion installer or after updating. What to do?

Please read this whole message before doing anything.
This procedure is a diagnostic test. It won’t solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
Third-party system modifications are a common cause of usability problems. By a “system modification,” I mean software that affects the operation of other software — potentially for the worse. The following procedure will help identify which such modifications you've installed. Don’t be alarmed by the complexity of these instructions — they’re easy to carry out and won’t change anything on your Mac.
These steps are to be taken while booted in “normal” mode, not in safe mode. If you’re now running in safe mode, reboot as usual before continuing.
Below are instructions to enter some UNIX shell commands. The commands are harmless, but they must be entered exactly as given in order to work. If you have doubts about the safety of the procedure suggested here, search this site for other discussions in which it’s been followed without any report of ill effects.
Some of the commands will line-wrap or scroll in your browser, but each one is really just a single line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, and you can then either copy or drag it. The headings “Step 1” and so on are not part of the commands.
Note: If you have more than one user account, Step 2 must be taken as an administrator. Ordinarily that would be the user created automatically when you booted the system for the first time. The other steps should be taken as the user who has the problem, if different. Most personal Macs have only one user, and in that case this paragraph doesn’t apply.
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ If you’re running Mac OS X 10.7 or later, open LaunchPad. Click Utilities, then Terminal in the page that opens.
When you launch Terminal, a text window will open with a line already in it, ending either in a dollar sign (“$”) or a percent sign (“%”). If you get the percent sign, enter “sh” (without the quotes) and press return. You should then get a new line ending in a dollar sign.
Step 1
Copy or drag — do not type — the line below into the Terminal window, then press return:
kextstat -kl | awk '!/com\.apple/{printf "%s %s\n", $6, $7}'
Post the lines of output (if any) that appear below what you just entered (the text, please, not a screenshot.) You can omit the final line ending in “$”.
Step 2
Repeat with this line:
sudo launchctl list | sed 1d | awk '!/0x|com\.(apple|openssh|vix)|edu\.mit|org\.(amavis|apache|cups|isc|ntp|postfix|x)/{print $3}'
This time, you'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning not to screw up. You don't need to post the warning.
Note: If you don’t have a login password, you’ll need to set one before taking this step. If that’s not possible, skip to the next step.
Step 3
launchctl list | sed 1d | awk '!/0x|com\.apple|edu\.mit|org\.(x|openbsd)/{print $3}'
Step 4
ls -1A /e*/mach* {,/}L*/{Ad,Compon,Ex,Fram,In,Keyb,La,Mail/Bu,P*P,Priv,Qu,Scripti,Servi,Spo,Sta}* L*/Fonts 2> /dev/null
Important: If you synchronize with a MobileMe account, your me.com email address may appear in the output of the above command. If so, anonymize it before posting.
Step 5
osascript -e 'tell application "System Events" to get name of every login item' 2> /dev/null
Remember, steps 1-5 are all drag-and-drop or copy-and-paste, whichever you prefer — no typing, except your password. Also remember to post the output.
You can then quit Terminal.

Safari is not working in lion. I get the message not responding. Please help.

Safari is not working in Lion. I get the spinning ball. Please help.

We do not provide support for bugzilla here. Please visit http://www.bugzilla.org/ to find out how to get help.

Mac Book Software Update not working, iTune will not update because of that, iPhone 4 won't connect to iTunes because iTunes is not updated. Mac v.10.5.8, iTunes v.10.5.2, iPhone4 iOS 6

Mac Book Software Update not working (Software Update does not have any new software for your computer at this time), my current MacBook version is 10.5.8.
As a result I can't update iTunes, version 10.5.2 (This software requiers Mac OS X version 10.6.8 or later)
Now when I connect my iPhone 4, version iOS 6 iTunes can't connect to iPhone (The iPhone "XXXXX's iPhone" cannot be used because it requiers iTunes version 10.6.3 or later.)
so in a nutshell can't use iphone 4, because iTune is not updated and will not update because Mac Book is not up to date and will not update either.
Please help.
Thank you
bt465

Welcome to Apple Support Communities
Snow Leopard is a paid upgrade. http://support.apple.com/kb/sp575 Call Apple to buy Snow Leopard. Then, make a backup, insert the DVD and upgrade. When it finishes, open  > Software Update

External Hard Drive does not work with Lion

Hi
My External Hard Drive does not work with Lion this message appears:
NTFS-3G could not mount /dev/disk1s1
at /Volumes/My Passport because the following problem occurred:
/Library/Filesystems/fusefs.fs/Support/fusefs.kext failed to load - (libkern/kext) link error; check the system/kernel logs for errors or try kextutil(8).
the MacFUSE file system is not available (71)
can anyone help?

Hi,
See this Discussion:
https://discussions.apple.com/thread/3191198?start=0&tstart=0
Cheers,

Adobe Photoshop CS5 is not working with Lion.

Adobe Photoshop CS5 is not working with Lion. It is totally non responsive to a point where i cannot work. all other CS5 programs seem to be running well so far. any advice? if no, then how do i revert back to Snow leopard?

I had real problems with all Adobe apps - it said I needed to install a version of Jave Runtime, but kept saying that I wasn't connected to the internet to complete the action. This was not the case - I was connected to the internet.
I followed this link : http://support.apple.com/kb/DL1421 to install a version of Java and all Adobe apps fire up now. Haven't done much testing within the apps, but at least I'm further ahead than I was.
So thanks to the message boards for helping me out.
Reg

Font missing CS4 script not working in CS5???

hi, my font missing script is working in CS3, and CS4 but not working in CS4.
I don't know why, any help please.
Sam

Object model has some changes in CS5.
So use the below code in top of your script.
app.scriptPreferences.version = 6.0;

IPhoto 9.1.5 slideshow is not working on lion

Hi,
my iPhoto 9.1.5 is not working on lion. I have upgraded from Snow Leopard to Lion. If i click on slideshow then it seems to be started with full screen but it return back without slideshow.
Waiting for any clew.
Moshiour

For iPhoto 9.1.5:
http://support.apple.com/kb/HT4754
Regards,
Colin R.

Wireless OS Update - not working

I've been trying to update my BlackBerry Torch 9800 6.0.0.246 to higher version wirelessly but all it says - “Your BlackBerry is up to date.” The others we're able to update their smartphone but why can't I? I don't want to plug my phone to any computer using the cable connector because I'm afraid it would get virus and be ruined eventually. Please help..

Duplicate:
http://supportforums.blackberry.com/t5/BlackBerry-Torch/wireless-OS-update-not-working/m-p/2039115#n...
Answer provided there. Please avoid poly-posting the exact same issue.
Thanks!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Site list update not working with TED and Zenworks for Servers

Product: Zenworks for Desktops 7Sp1 and Zenworks For Server/TED 7Sp1HP5
Subject: Site list update not working with TED and Zenworks for Servers ,
all on Linux
Description: We have an exiting environment with 6 ZfS Servers and now we
brought up a new Server for another location. I configured all same as on
the other Server and the new one created all NAL-Apps at the new location.
But in the Application Site list on the golden App is this Application
missing. So I clicked on the Link up site list on the Distribution Screen
in C1. On ApplicationSite list the App from the new location is missing.
So I removed all and added the new from the new location and now i see all
in the application site list.When I install an app on the client on the
new location NAL is connecting alway th the same (wrong location-server
and i get an msi error 1612 or id=53272 with path=\Wrong serverpath to
file.
I looked on the other tab on C1 at the golden app an I see the backlinks
are going to all other servers without the new one. Software installation
on other locations are ok
Regards

Andreas,
I forgot to mention that you can also set the loging level on the Distributor and the Subscriber to 6. to do this at the Zenworks Server Management prompt type "setconsolelevel 6" if you want to capture this to the log file ted.log then use "setfilelevel 6"
Next delete the Distribution from the Subscriber and then re-push the channel.
What we are looking for here in the log is the creation of the object and the linking information about the gold object. it should look like this (not the failure part ;-))) )
In this excerpt you will see the entry
Golden App =
This should be were the link is to
You can check this both ways in the Golden App and in the Distributed Application.
Here is a log from me that shows this info as an example of what you should be looking for.
2008.05.29 03:35:41 [TED:Work Order In(yourserver.yes.com)] Receiving distribution: Creating new application failed,
Subscriber Tree Name= YOUR-TREE,
Subscriber DN = SUBSCRIBER_YOURSERVER.BRN.FL.SUBS.SUBSCRIBERS.ZSM. GRS.CBH,
Golden App = SCRIPT-MS-HOTFIX.APP.BRN.ZENGOLD.GRS.CBH,
Attempted AppName = SCRIPT-MS-HOTFIX.APP.BRN.HAVERHI.PALM.FL.CBH,
error message: Failed creating SCRIPT-MS-HOTFIX.APP.BRN.HAVERHI.PALM.FL.CBH. With error message: Setting the trustee for BRN.HAVERHI.PALM.FL.CBH on the file "VOL1:\ZEN\UTILS" failed. Look in subscriber log file for more details..
2008.05.29 03:35:41 [TED:Event Processing] Handle Event: Work order IN completed... Creating new application failed,
Subscriber Tree Name= YOUR-TREE,
Subscriber DN = SUBSCRIBER_HAVERHI-FLBRN1.BRN.FL.SUBS.SUBSCRIBERS.ZSM.GRS.CBH,
Golden App = SCRIPT-MS-HOTFIX.APP.BRN.ZENGOLD.GRS.CBH,
Attempted AppName = SCRIPT-MS-HOTFIX.APP.BRN.HAVERHI.PALM.FL.CBH,
error message: Failed creating SCRIPT-MS-HOTFIX.APP.BRN.HAVERHI.PALM.FL.CBH. With error message: Setting the trustee for BRN.HAVERHI.PALM.FL.CBH on the file "VOL1:\ZEN\UTILS" failed. Look in subscriber log file for more details..
2008.05.29 03:35:41 [TED:Event Processing] Received (from haverhi-flbrn1.yesbank.com) Creating new application failed,
Subscriber Tree Name= YOUR-TREE,
Subscriber DN = SUBSCRIBER_HAVERHI-FLBRN1.BRN.FL.SUBS.SUBSCRIBERS.ZSM.GRS.CBH,
Golden App = SCRIPT-MS-HOTFIX.APP.BRN.ZENGOLD.GRS.CBH,
Attempted AppName = SCRIPT-MS-HOTFIX.APP.BRN.HAVERHI.PALM.FL.CBH,
error message: Failed creating SCRIPT-MS-HOTFIX.APP.BRN.HAVERHI.PALM.FL.CBH. With error message: Setting the trustee for BRN.HAVERHI.PALM.FL.CBH on the file "VOL1:\ZEN\UTILS" failed. Look in subscriber log file for more details..

MOVED: MSI Live Update not working Windows XP Professional 64bit Edition!!!

This topic has been moved to Operating Systems.
MSI Live Update not working Windows XP Professional 64bit Edition!!!

Thank you so much. I just want to say I really appreciate when people do take the time to post me in return. So I really mean it, Thank You.
A quick question. You see, I have been upgrading my computer. I installed a Belkin USB USB Card (high speed 2.0) cause I needed more USB ports. Then I checked for compatable RAM and upgraded my RAM from 512MB to 2Gigs. Everything alright.
Now, I have checked for processors that are compatable with my board K9VGM-V (MS-7253). And MSI's chart says mine is compatable with the AMD Athlon 2x 6000 (3.0Ghz) *IF* I use the 89 watt and not the 125 watt. Here is a good URL for the processor details I found:
http://www.cpu-world.com/CPUs/K8/AMD-Athlon%2064%20X2%206000+%20-%20ADA6000IAA6CZ%20(ADA6000CZBOX).html
Now do you have any tips and I will probably have to flash to BIOS for sure after this upgrade won't I?

CS4 Updater not working on Lion?

Similar Messages

Maybe you are looking for