CS4 upgrade will not load

Have a AMD machine which I just upgraded from Win 2000 Pro to Winxp Pro SP3. Plenty of RAM. Am upgrading photoshop CS2 to CS4. Have completely formatted/partitioned the drive numerous times. Everything loads fine off of the DVD/CD drive except for the CS4 upgrade disk. It is not the disk as the disk can be read by most other machines I put it in. Have tried another cd drive taken out of a pc where it could be loaded, but would not load on my pc. My Computer will show the drive but no data whatsoever. It seems to have a problem when I try to load it into two other AMD machines... All Intel machines running XP it loads up just fine.

Installed all the specific AMD patches? Since you speak of upgrading from Win2k, the procs may simply be too old. CS4 does not support those anymore since they don't offer the required features for SSE2/ 3 and all that...
Mylenium

Similar Messages

Lightroom upgrade will not load when it is opened.

When I load Lightroom upgrade to 4.0 and try to open the upgrade it hangs during loading of the catalog. I have uninstalled and reinstalled several times and the upgrade does not work. I'm running Win 7 64 bit.

It sounds like the software equivalent of a heart attack in old age! My prescription would be LR 5.7 used daily.
Bob Frost

TS1702 App upgrades will not load. It just says "waiting" under the app

My grandson got on my IPad yesterday. Now no apps will upgrade and I cannot download any new apps. It just says "waiting" under the app Icon

Here are a number of things that have worked for others in the past. Ignore whatever you tried if it didn't work - or feel free to try again.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
Make sure that you do not have a stalled download in iTunes - a song or podcast .... if you have a download in there that did not finish, complete that one first. Only one thing can download at a time on the iPad so that could be what is causing the problem.
If that doesn't work - sign out of your account, restart the iPad and then sign in again.
Settings>iTunes & App Store>Apple ID. Tap your ID and sign out. Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
Go back to Settings>iTunes & App Store>Sign in and then try to update again. Tap one waiting icon only if necessary to start the download stream.
You can also try deleting the waiting icons - tap and hold down on an icon until it wiggles - the tap the X on the icon to delete it. Then try to download again.
You can try resetting all settings. Settings>General>Reset>Reset All Settings. You will have to enter all of your app preferences and device settings again.
If all else fails, download the updates or the apps in iTunes on your computer and then sync the content to your iPad.

CS4 InDesign will not load

I purchased CS4 Design Premium last week. I downloaded it online from Adobe. All programs have loaded except InDesign.
When I try to initialize the program I get an error message:
Installation can not continue until the following applications are closed: Adobe Bridge.
Adobe Bridge is not open as far as I can tell. Any Ideas on how to resolve this issue.
I am running vista 64

You may have Bridge set to load when the computer boots. Make sure that background process isn't running.
Bob

10.4.3 Upgrade will not load

hi -
I am currently running 10.4.2 on a computer that came with Tiger. I am trying to upgrade to 10.4.3 and have repeatedly gotten the following message:
"The digital signature for this package is incorrect. The package may have been tampered with or corrupted since being signed by “Apple”.
I have followed all the suggestions I can find to work around this issue (i.e. repairing disk permissions, redownloading the update, using the stand alone) and nothing makes any difference, same message every time.
What can you suggest for working around this issue?
- pb

I think I detect a trace of sarcasm in your post - but I could be wrong. If so, there is no need for such, for you no worse off than before - downloading on another machine and moving via jump drive also yielded a pkg that would not open, and your tried that a couple of days ago.
So let me explain my logic so that you may understand why I made the 'brilliant' suggestion that unfortunately, did not resolve the problem:
Since the contents of the reciepts folder tells software update what has/has not been installed; lacking the reciept, SU should have 'rediscovered' the update, downloaded it, and installed, instead of relying on the previously downloaded and cached pkg file, which, as already determined, was giving you an invalid digital signature error.
5 minute DL time for the complete update seems short - supporting the theory the existing receipt could have been interfering with redownloading the update.
At 97mb (or 109mb for the combined), the download should have taken a bit longer than 5 minutes. At under 5 minutes, an incomplete download is implied, which would explain the invalid signature.
Ergo, delete the receipt (and existing pkg as someone else suggested) and try again.

Windows 10 free upgrade will not load in my aspire V17 791, have the latest drivers i think.

Getting this error constantly, tried physical ethernet connection, and wireless connection, they both look like they're downloading the upgrade, then when it's supposed to reboot into the windows 10 install, it never does, it just goes back to my old win 8.1 and i see it errored out, with this. WindowsUpdate_80240054 which says i need updates, but i dont' see any new updates on acers website, nor is there any new windows updates to d/l. So i'm at a loss, anyone else have trouble with windows 10?

Thanks Justin,
I did find the solution in that series of emails but it definitely was a windows problem. what I had to do to get it to work was actually disable my HD by unplugging it and then did another clean install in which it used my ssd as the main drive and installed fine. if anyone else has this problem you can post here and I can tell you what I did. but basically just powered down, unhooked HD then loaded windows 10 then powered down and re plugged in the hard drive and everything was good.

After upgrading to os josemite cs4 applications will not run. Message displayed that I need to install the legacy java SE 6 runtime. Is this necessary to fix the application loading?

after upgrading to os josemite cs4 applications will not run. Message displayed that I need to install the legacy java SE 6 runtime. Is this necessary to fix the application loading?

Found the answer:
Java for OS X 2014-001 includes installation improvements, and supersedes all previous versions of Java for OS X. This package installs the same version of Java 6 included in Java for OS X 2013-005.
installed above and it now works
Blessings

Since upgrading to Firefox 27.0 some webpages will not load when I click on them. It gives me a message saying that Firefox can't find the server.

Since upgrading to Firefox 27.0 some webpages will not load when I click on them. It gives me a message saying that Firefox can't find the server. I have to click the link several time before it will load and sometimes when they do load it does not show the page right. It is like the HTML is messed up or something. I have tried everything I can think of. I started in safe mode, still did it., I removed add-ons, still did it., I reset Firefox and still did it., I completely uninstalled Firefox and re-installed Firefox and it still does it. I have tried Malware Bytes Anti-Malware scans and Avast boot-time scans and found no malware or viruses. I have found that those websites open the first time with no problems on my IE9 and they used to do so in Firefox 26.0. I'm at my wit's end. The website links are in my bookmarks and are used all the time so they are trusted and my avast is set to allow them. They range from news websites to gun websites and everything I have read says that Mozilla does not filter those unless something has changed recently.

Try this as a first step; 
Clear the Cache '''''Firefox/Tools > Options > Advanced > Network > Cached Web Content: "Clear Now"''''' 
and 
Remove Cookies '''''Firefox/Tools > Options > Privacy > Cookies: "Show Cookies"''''' 
If there is still a problem,
'''''[https://support.mozilla.org/en-US/kb/troubleshoot-firefox-issues-using-safe-mode Start Firefox in Safe Mode]'''''
While you are in safe mode;
'''''Firefox Options > Advanced > General'''''. Look for and turn off '''Use Hardware Acceleration'''.

Upgrading to V4 has lost all of my Bookmarks, I still have the restore files in my profile data but they will not load, I have tried importing the html backup file too but it didn't work either. How can I get them back?

Upgrading to V4 has lost all of my Bookmarks, I still have the restore files in my profile data but they will not load, I have tried importing the html backup file too but it didn't work either. How can I get them back?

Ok this is bizzare!
Thank you for your response, I went throught each and every step without any luck, even got the recovery programme, and painstakingly tried to sift through all that mumbojumbo to find what i needed. finally found the bookmark bit, but it had been fully overwritten :(, so on reading about previous ff versions, found the sqlite thingys, and they were relatively unscathed(partly written over, but saveable apparently TG), saved them to adiff drive, amongst other possibly good folders. Then looked up how to install them, and it said to close FF, and install to profile folder.
So i tried to close FF, and the original problem from a few days ago, where it asked me if 'i was sure i wanted to close this window as it has X tabs open', popped up again. This is where 'open blank page' selection was set, over 'open previous tabs'. Wanting to save that info on how to sort out these friggin files, I reset the Option to 'open previous tabs', and closed FF. After unsucessfully searching for the profile folder on my laptop, i opened FF intending to search online for where i could find said folder.
AND BANG, surprise surprise, the FF I had just closed with only tabs open about finding out what the heck to do, had disappeared, and instead my original saved tabs were up, and my bookmarks are there..... I am gobsmacked! what the heck just happened there???
I have made 3 back up in different folders now, of those friggin bookmarks. I am weary now tho of shutting it all down.... what if its back to the other pages I had with no bookmarks, tomorrow :(

Premiere CS4 will not load timelines

I have been working on a project will several sequences. Today when I load project to contine
working on them, the timeline will not load. I can view the sequence in the Program Monitor,
but when I double click it does not open the timeline at the bottom of the screen. It does nothing! HELP!!!

I can view the sequence in the Program Monitor,
If you can view the sequence in the program monitor you probably have the timeline working but cant see it. have you changed your view settings where the timeline might be hidden from you ? Maybe try using "editing" view or "reset" your view to the default ?
maybe post a screenshot of what you are seeing when you open cs4...

After upgrading to 9.0.1 Mozilla Firefox for my pc, Firefox will not load any web pages.

After upgrading to 9.0.1 Mozilla Firefox on my pc, Firefox will not load any web pages whatsoever, not even itself. My OS is Windows Vista 64. Thanks for any help. (Having to use Internet Explorer presently.)

Perform the suggestions mentioned in the following articles:
* [https://support.mozilla.com/en-US/kb/Template:clearCookiesCache/ Clear Cookies & Cache]
* [[Troubleshooting extensions and themes]]
* Update All your Firefox Plugins -> [https://www.mozilla.org/en-US/plugincheck/]
** '''When Downloading Plugins Update setup files, Remove Checkmark from Downloading other Optional Softwares with your Plugins (e.g. Toolbars, McAfee, Google Chrome, etc.)'''
Check and tell if its working.

ITunes Store will not load. Upgraded, diagnostic is ok, can get radio.

I've upgraded iTunes. I've run the diagnostic and it's ok. I can get the radio stations to play, but the iTunes store will not load. It takes about 3 minutes to "access" and then I get the Apple logo in the yellow top loading bar, and "iTunes Store" in the display area. No other messages. However, when I right click the iTunes icon on my computer (Windows Vista) and run as administrator, I get access to the iTunes store, but my music library has only 15-20 songs in it. Any help would be appreciated.

Hey, I read another discussion with the same issue and did a winstock reset. I thought it didn't work so I got ****** off an shut the computer down with yet another failed solution. When i logged back in it worked. Finally. I've been with out itunes store for over a month.

CS6 upgrade suddenly will not load, telling me it is a trial version of CS6 Ext and I must register.

I upgraded from CS5 to CS6 for my IMac. I downloaded CS6 put in my serial number and it worked fine for a number of weeks. Suddenly, when I went to use it it said it was a trial version. I had to register it to use my CS6 I registered it and it worked, but only as a trial version of CS6 Extended. I do not want CS6 Extended. I deleted it from my hard drive and once again downloaded my upgrade of CS6 again with my serial number and it worked fine for a couple of weeks. Today, once again, it tells me it is a trial version and will not load unless I register the trial version. What the heck is going on? This is crazy. I simply want to use CS6, for which I paid. Help!
Frank Brault

There is a lot of this going around. Adobe is aware of problem and hope to get a fix soon. http://forums.adobe.com/thread/1114727?tstart=0

Bridge Messages will not load messages after 1.0.6.2390 upgrade

After I updated to 2390, messages will not load, after about 5 minutes it will display content of last message but left side message list will not populate. I just keep giving me the GREEN CIRCLE WAITING and will not load messages. This is the first time I've had any problems with bridge messages. All the other bridge apps (calendar, notes, contacts, bridge browser) all work. I un-installed bridge from my phone (ver 1.0.0.93) and re-installed it, still no luck. I re-booted PB, no luck. Is anybody else having a bridge message problem since 1.0.6.2390 update.

tboyd wrote:
Knottyrope, I deleted all bluetooth profiles, phone and PB, did battery pull on phone, playbook reset. paired phone with PB and after 8 minutes I can see the header of 1 email message and under the All messages list on left side it is blank and the GREEN CIRCLE of WAITING is still spinning.
Calender works, contacts works, Bridge browser works, bridge files works, but bridge messages will not load.
I never had any problem with bridge messages working through all the previous OS upgrades.
If you did all of that, then maybe there is an issue we cant help with, please call support to get your PlayBook logs, so RIM can address it in a future release or maybe they have a fix we dont know about.
Click here to Backup the data on your BlackBerry Device! It's important, and FREE!
Click "Accept as Solution" if your problem is solved. To give thanks, click thumbs up
Click to search the Knowledge Base at BTSC and click to Read The Fabulous Manuals
BESAdmin's, please make a signature with your BES environment info.
SIM Free BlackBerry Unlocking FAQ
Follow me on Twitter @knottyrope
Want to thank me? Buy my KnottyRope App here
BES 12 and BES 5.0.4 with Exchange 2010 and SQL 2012 Hyper V

Cs4 will not load cannon 5d mark II raw files

I had to reload cs4 and now it will not load a raw file from the 5d mark II. It worked fine before I reloaded it. I am using windows 7 and it will look at the raw files ok. I tried downloading the raw programs from microsoft and adobe.

Update Camera Raw...the current version for CS4 if Camera Raw 5.6.

CS4 upgrade will not load

Similar Messages

Maybe you are looking for