CS4 user...need help on CS6 vs. Illustrator CC

I have CS4 but constantly run into the issue of a file having been "created in a newer version of Illustrator." If I purchase Illustrator CC, will I be able to open these files????? Or do I have to have CS6???

That is true, casewalk.
There may be some funny things happening because of changes between versions, especially for live Type (editable text).
You should be aware that CC is only available as a subscription; CS6 can be bought just as the earlier versions (perpetual licence).
If you need either, the download pages are here:
http://www.adobe.com/downloads.html?promoid=JZEFS
http://www.adobe.com/products/catalog/cs6._sl_id-contentfilter_sl_catalog_sl_software_sl_c reativesuite6.html?promoid=KFPHN

Similar Messages

Frustrated: Novice Illustrator User Needs HELP

Frustrated: Novice Illustrator User Needs HELP
Hello All
I am a novice user of Illustrator [after you read my question it will probably be obvious] running Illustrator 14.0.0 (CS4) - on a MAC iMac running 10.4.11. I am a small business owner and have to wear many hats and so I am forced to be my graphic designer by default - ha ha
PROBLEM - If I make a box using the RECTANGLE TOOL... The box should have a point at each Corner and the Middle of the box, as well as, in the Middle of each Side, and middle of Top and Bottom for a total of 9 anchor points... but it only has 5... missing the 4 anchor points in the Middle of each Side, and middle of Top and Bottom. It is the same on Text Boxes too.. I can NOT find a setting to change this.... More, when running Illustrator on my MAC Laptop, It has all 9 anchors on the box... I looked at Preferences etc... and matched everything to be the same but the problem is not fixed?
Any help would be greatly appreciated
Thanks-
13CrazyTrain

Aw, c'mon James. Chill it a bit.
Yeah. You continually throw around your little personal jibes, and then if someone calls your bluff, you think you can back out of it with the old "can't you take a joke?" comeback.
In my previous work environment where everyone used Illie, Freehand was a word to be used cautiously – a bit like Macbeth in the theatre.
Well, I didn't work in your previous environment. And FreeHand specifically had nothing to do with this thread until you brought it up. Seems to me it's you who has a FreeHand chip on his shoulder.
I thought you knew my way of expressing myself better...
What, you think I keep a personality registry of regulars here or something? I'll tell you what I don't do: I don't engage in personal insults here. Yet your personal jibes are frequent enough for me to have grown weary of them.
I think I was not dismissing bounding boxes as useless...
Excuse me? "There's absolutely no need to use bounding boxes"?
You are probably right that bounding boxes came with Illie 9.
Probably before that. But I can personally recall that the current-selection bounding box was present in AI9. Unlike some, I try to avoid making claims that I can't immediately substantiate.
I hopped straight from 6 to 9 and that was the first time I had seen them outside of Freewotever.
I'm not familiar with "Freewotever." But if you're again trying to be funny, you are also again revealing your near complete unfamiliarity with it. FreeHand is not the program that continually cluttered the interface with bounding boxes. In fact, for many years that is exactly one of the distractions FreeHand users complained about re Illustrator.
First off, FreeHand's interface doesn't display bounding boxes. It displays only bounding box handles (four dots) on non-basic constructs like clipping paths. (Somewehere around FH 9, it implemented the optional Transform Handles, but that's another thing.) In the cases of rectangles and ellipses, FreeHand doesn't display Bounding Boxes per se. Working in FreeHand has always provided more functionality with much less visual clutter (and tool glut) than Illustrator's defaults.
The difference is that FreeHand has always provided proper live geometric shape primitives--something which Illustrator still doesn't provide, even though it's one of the most basic of all vector drawing interface expectations, being present in just about any vector drawing program on the planet--except Illustrator. That point of confusion is common among those who are experienced only with Illustrator's chronically outdated and archaic interface.
Quite to the contrary, a rectangle drawn in a program that does provide basic live primitives doesn't need a bounding box to perform the bare-bones basic manipulation exemplified, because you can change the aspect ratio of it (and corner radius) anytime you want, regardless of its rotation. You can do this not only in FreeHand, but Canvas, Inkscape, Xara Designer, and even in just about any basic drawing module of just about any "works" or "office" bundle. It's just Illustrator that still fails to provide live shape primitives, and therefore needs a rotated bounding box to provide a very limited subset of such common functionality. You draw a rectangle (or any other geometric primitive) in Illustrator, and all you get is a dumb path. So Illustrator actually needs bounding boxes more than other programs, because of its anemic core funciton set and its hideous user interface.
But of course, someone who is familiar only with Illustrator wouldn't know that. Which is fine...so long as they don't spew derision at programs they know next to nothing about (and users of such programs).
...bearing in mind that I have been at this job since the days of Rotring pens with nosebleeds.
So? I was using Rapidographs and constructing compound rotation in isometric on the board for about a decade before I came to prefer Staedtler pens because I found them less prone to clog. What does that have to do with anything?
Obviously newcomers should be encouraged to use new features, but preferably not before they have grasped the basics thoroughly. How basic bounding boxes are is perhaps a moot point.
Nonsense. Other self-proclaimed "experts" in Illustrator would no doubt argue that bounding boxes were added for the benefit of "beginners." Again, this is not a "new feature." And yes, it is bare-bones basic; just implemented in a half-baked manner in Illustrator.
As for step 3 you are right, but if you turn off the preview you can use the pixels on the paths for alignment,
Egads. That's really grasping at straws, Steve.
...Or use bounding boxes.
Or use bounding boxes.
JET

Need help moving my cs5 illustrator and photoshop to my new computer

I need help installing my cs5 illustrator and photoshop on my new computer

I have a macbook air...not sure what operating system....
Kelsey West
Kelsey West Designs
[email protected]
818.631.0172
[image:
http://www.hmcatering.com/wp-content/uploads/2013/03/AsSeenOnSMP_Blue.png][image:
http://tobinphotography.com/wp-content/uploads/2013/02/Style_me_pretty_blog_badge.png]

Data base problem-new user need help

im new user and trying to insert data base to my page using
"asp.net c",i get connetction to my data base but when i try to
build a form ,and then preview him i get ,the following message
Server Error in '/' Application.
Parser Error
Description: An error occurred during the parsing of a
resource required to service this request. Please review the
following specific parse error details and modify your source file
appropriately.
Parser Error Message: File or assembly name DreamweaverCtrls,
or one of its dependencies, was not found.
Source Error:
Line 1: <%@ Page Language="C#" ContentType="text/html"
ResponseEncoding="iso-8859-1" %>
Line 2: <%@ Register TagPrefix="MM"
Namespace="DreamweaverCtrls"
Assembly="DreamweaverCtrls,version=1.0.0.0,publicKeyToken=836f606ede05d46a,culture=neutra l"
%>
Line 3: <MM
ataSet
Line 4: id="DataSet1"
Source File: e:\inetpub\wwwroot\Untitled-1.aspx Line: 2
Assembly Load Trace: The following information can be helpful
to determine why the assembly 'DreamweaverCtrls' could not be
loaded.
=== Pre-bind state information ===
LOG: DisplayName = DreamweaverCtrls, Version=1.0.0.0,
Culture=neutral, PublicKeyToken=836f606ede05d46a
(Fully-specified)
LOG: Appbase = file:///e:/inetpub/wwwroot
LOG: Initial PrivatePath = bin
Calling assembly : (Unknown).
===
LOG: Publisher policy file is not found.
LOG: No redirect found in host configuration file
(E:\WINDOWS\Microsoft.NET\Framework\v1.1.4322\aspnet.config).
LOG: Using machine configuration file from
E:\WINDOWS\Microsoft.NET\Framework\v1.1.4322\config\machine.config.
LOG: Post-policy reference: DreamweaverCtrls,
Version=1.0.0.0, Culture=neutral, PublicKeyToken=836f606ede05d46a
LOG: Attempting download of new URL
file:///E:/WINDOWS/Microsoft.NET/Framework/v1.1.4322/Temporary
ASP.NET Files/root/804ee9b4/26f0df32/DreamweaverCtrls.DLL.
LOG: Attempting download of new URL
file:///E:/WINDOWS/Microsoft.NET/Framework/v1.1.4322/Temporary
ASP.NET
Files/root/804ee9b4/26f0df32/DreamweaverCtrls/DreamweaverCtrls.DLL.
LOG: Attempting download of new URL
file:///e:/inetpub/wwwroot/bin/DreamweaverCtrls.DLL.
LOG: Attempting download of new URL
file:///e:/inetpub/wwwroot/bin/DreamweaverCtrls/DreamweaverCtrls.DLL.
LOG: Attempting download of new URL
file:///E:/WINDOWS/Microsoft.NET/Framework/v1.1.4322/Temporary
ASP.NET Files/root/804ee9b4/26f0df32/DreamweaverCtrls.EXE.
LOG: Attempting download of new URL
file:///E:/WINDOWS/Microsoft.NET/Framework/v1.1.4322/Temporary
ASP.NET
Files/root/804ee9b4/26f0df32/DreamweaverCtrls/DreamweaverCtrls.EXE.
LOG: Attempting download of new URL
file:///e:/inetpub/wwwroot/bin/DreamweaverCtrls.EXE.
LOG: Attempting download of new URL
file:///e:/inetpub/wwwroot/bin/DreamweaverCtrls/DreamweaverCtrls.EXE.
Version Information: Microsoft .NET Framework
Version:1.1.4322.573; ASP.NET Version:1.1.4322.573
I know its probably something stupid ,so u can lauph,but i
realy cant fix it.
need help
tnx for advance

anyone? please help

New MAC user, old Picasa user - need help!

recently purchased my IMAC - and while I have loved it - I haven't loved used iphoto. I'm an old picasa user and when I copied all of my picasa fotos in iphoto - while the pictures transfers all the names and dates of the folders that the pictures were in did not - so they are all randomly scattered through out.
What I would really like to do is use Picasa for Mac and have it recognize my external drive, storing and altering all of the pictures there. Is this possible? I need help!

Sure - you can use any software you choose - you can not use both iPhoto and Picasa - they do not work together
For iPhoto support this is a good pace
For Picasa support yu need to go to the Picasa forums
And note that while Picasa is a very good package iPhoto is a dabase program and is much more powerful - but it does have a learning curve
LN

I need help uninstalling CS6 - have tried all the usual with no joy

I need to uninstall Cs6 for a reinstall as it is misbehaving.
But when I try to uninstall the message keeps appearing that Uninstall FAiled and to use the cleanr - done it, quit all programmes - none running, not even virus software etc, restart - done it numerous times
contact customer services for assistance
I am doing it now!!!
Can you help with this. The software is deactivated and everything looks good to uninstall.
Please help
Mac OS X 10.8.5

install over your current installation to reinstall your uninstaller.
you can then uninstall, clean (Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6) and do a proper installation.

I have a big problem at the installation of after effects CS4 ! NEED HELP

HEY all i need help I want to install AFTER EFFECT cs4 and i do all AV hijack and usb fix scan nothing fond >>NEED HELP
ERROR CODE:
Adobe Dynamiclink Support
Erreur:
Error 2.
Adobe Dynamiclink Support
Erreur:
Error 1605. Cette action n’est valide que pour les produits actuellement installés.
THANKS

I know the problem is i have an old AE cs4 and i don t uninstall correctly but i have another problem with twixtor effect i register my twixtor but i have the orange CROSS on my video --' and THIRD PARTY installer won't install my new effect "say uninstall and install correctly with serial number ..."
i have CORE2 DUO E6320 GTS8600XFX 2GO RAM DDR2 ASUS MOTHERBOARD (bad) WINDOWS 7 32BIT ULTIMATE for the DYNAMIC links probleme i use ccleaner REGEDIT and cs4 cleaner tools .

VoiceOver user needs help with reminders

I am using VoiceOver and I need help setting up a reminder. I type the name and then go into the details to have it remind me on a day and I can't seem to control what day and time it reminds me on. It always defaults to the top of the next hour. How can I change this to a time I choose?

#3 is even easier
Go to Hub settings, then display and actions and drag down, you'll see the option 'delete'.
Regards.
Blackberry! Here, now, forever!

New User,need help, charging, using, everythi

I recently bought a Zen V Plus and have no tech savy so need help. I've checked with support but don't get th answers I need so thought someone here could help. Here are my questions.
1. Is there anything else that can be used as a charger besides a Zen product. I have several cell phone chargers both for house and can, can any of these be used? need to save money
2. Can the Zen be used while charging? All I get is the docked message and nothing else?
3. I use my player mainly for audio books and the battery doesn't hold for a whole book so I have to charge but when I do the book goes? back to the first part instead of holding my place. I do I hold my place?
Anybody that can give me simple clear answers please help. Because of my age I have trouble reading and the player allows me to enjoy books but I have trouble understanding how to make it work. Don't laugh but my 3 year old grandson would probably have better luck with getting it to work.
Thanks for any help provided

Li'vewolf,
First, no three year old will do better than you can with the player. That said, spend some time reading the tutorials listed under support at the top of this page, and use the search in this forum to find everything you can about the Zen V Plus.
When I shut down my Zen V plus, while reading my current audiobook, I just hit the pause button and then pull down the slide button on the left for "shutting down". Some of my books seem to do better with just a shut down instead of pause first. I have found that the bookmark feature is more trouble than it is worth. I use audiobooks from NetLibrary and Overdri've and a few extra from a forum on audiobooks. It seems that they all work differently when shutting down and holding a place.
Anyway, spend some time trying different methods of bookmarking. The Zen V Plus is fairly forgiving player.
Best Wishes.
luvmyrescuedogs
One more thought for recharging your battery. Try Amazon or eBay for a recharger, if you can't afford the Creative charger, but remember that you can fry the player if you use the wrong one and the warranty doesn't cover that damage. The easiest and cheapest way to recharge is to use the computer.

BB Curve/Mac OS 10.4.11 User - Need help!

Hi
I have many questions.
First -
Pocket Mac
What do I need to DL and install from the BB site?
I have the Blackberry Curve but due to lack of know how I am underutilizing it's abilities.. I need help with this!
There are a lot of choices and I think I may need to DL more than one choice but I just don't know.
https://www.blackberry.com/Downloads/entry.do?code=A8BAA56554F96369AB93E4F3BB068C22
Seems there are a lot of issues. I have no immediate "tech support" [the ex is gone] and am not sure about several things.
What software exactly do I DL and install so I can sync up computer and BB?
Music:
The T-Mobile people told me that the BB could function as an I-pod. How do I UL all my music in my I Tunes library to my BB?
Email/Calendar:
Does the BB sync with gmail? I heard it did. How do I do that?
My MS office 04 Entourage is shot and I can't get a new install from ex so-
Calendar- Does Gmail calendar work?
Photos:
Works with I Photo right? Once I get the right Pocket Mac software?
SAFETY
I read someone lost their phone from installing Pocket Mac.
Word on that? It is my only phone, I don't have insurance on it. I am simply trying to utilize all that it offers and am a bit lost! I can figure stuff out but I worry that I will do that to the detriment of my files and/or device.
Recommendations to help this newbie get acclimated to the digital world?
Thanks!
M

1. You will want PocketMac 4.1 on that list.
2. iTunes are not usable on the BB until you remove the Digitial Rights from them; for instance, you can burn the iTunes to a CD and then burn the songs to a CD and then import them to iTunes and they will be DRM free.
3. It doesn't "sync" but it does reconcile your deleted messages to and from the BB to your Gmail account. However, your sent messages from the BB won't be synced to your Gmail account.
4. Gmail Calendar sync does work.
5. PocketMac works well for many, I have read some who don't like it. You shouldn't really have any problems, especially with it bricking your device.
Good luck.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

New airport user need help setting up a pc on the network

went and bought a airport extream today and my mac works fine on it but i also have a pc and need help getting it to work with the airport express. it seems to see the airport in the network slection screen but after i put in the pass i get nothing and it returns to the "chose a wireless network" can anyone help?

Thanks for the reply.
That's interesting, I guess I had assumed that would be a basic thing.
Right now the 4000 number is in port 1, and then 4244 is in port 2. So if no one else is on the phone, and my boss picks up his phone, dials 9 then XXX-XXXX, he will be routed outbound on the 4000 line on port 1. Then while he's talking, if I pick up the phone and dial 9 then XXX-XXXX, I will be routed out on the 4244 line on port 2.
Am I understanding that correctly?
If that is the case, then that is a bit frustrating. Our 4000 line has everything on it, call waiting, caller id, long distance, etc. But the 4244 line is just a basic service. So if I'm calling local or toll free, I don't want to tie the other line up in case someone else needs to make a long distance call to a client. Is there any work around to that at all? Is there any way to use steering digits to point the call to the right line? Would we have to put the PSTN lines on seperate SPA400's?
Again, any comments and suggestions are much appreciated!
Message Edited by VoIP_Me on 07-30-2008 06:27 AM
Message Edited by VoIP_Me on 07-30-2008 06:28 AM

New mac user needs help transfering files from Dell...

I have a Dell running Windows XP and need help transfering the files from the dell to the mac.
Also I have no idea what OP system I have, how do you tell which one you have???

Go to the blue Apple menu and scroll down to "About this Mac"
In the summary window that opens you will find the following information:
Mac OS X version (assuming you are running OS X)
Processor speed.
Memory
Startup disk
The More Info button will take you to an in-depth overview of hardware, network set-up and installed software.
As far as transference is concerned, you can either transfer files via CD, DVD, external hard drive... or by networking the two computers.
Here's a link for an overview concerning Mac to PC connectivity:
http://docs.info.apple.com/article.html?artnum=19652
I hope the above helps.
Reagrds
Tony
G5 iMac, G4PB, iMac DVD 450Mhz Mac OS X (10.4.2)

I need help with CS6 - it continues to ask me to install the full versions of the programs after I have installed them multiple times.

Hello,
I am writing from my computer at work. I have been working here since May and have been asked to install the full versions of CS6 MANY times now. I work for a few days and then the count down pops up saying my trial has ended. I am not working in a trial version - in fact I never was. The IT dept. here has un-installed and re-installed the CS6 complete versions onto my computer about 4 times now. We also "checked for updates". None of these things seem to be working. And then today to find out that no phone support to being offered to CS users any longer - only Cloud users - I am very disappointed. We have tried every single thing there possibility could be to fix this. I use Photoshop and Illustrator every day at work and I can not afford to be locked out of the programs because the trial has ended again and again and again. Please help ASAP.

See if this helps: Sign in, activation, or connection errors | CS5.5 and later

New Mac User Needs help opening Microsoft office 2007 files on a Mac!!!

I just got a used ibook G4. I had an old Pentium upgrade IBM before. I love my Mac, but I need my old school files form my IBM. I have OpenOffice.org 2.2 for Mac OS X 10.4.11 and I have a file converter program called X 11 that opens with a huge list of options for converting files, but it dose not say Microsoft offices 2007 it says the version numbers. I tryed the latest version and It wouldn't open in OpenOffice.org. Should I use Apple Script instead? I don't have Apple Works do I need it? I just want to look at the files. Why is there not a office viewer for Mac?

You have Tiger. Tiger=10.4.x; Panther=10.3.x; Leopard=10.5.x.
If you are trying with OpenOffice 2.2, it might be worth updating. I have version 2.4, which is the latest. Since 2.4 fixes a security issue, you should update if you plan to use the application anyway.
NeoOffice, as a previous poster pointed out, should be able to open Office 2007 documents.
See the discussion at http://user.services.openoffice.org/en/forum/viewtopic.php?f=5&t=4542 for the main OpenOffice thread discussing this issue. It discusses the ODF converter at sourceforge which NeoOffice uses to open Office 2007 documents. Apparently, you can use it with regular OpenOffice, too, but if 2.4 doesn't come with it (and maybe it does - I haven't checked), it might be easier to use NeoOffice for now.
X11 is not a file converter, by the way. It is the traditional unix GUI. Apple provides a version of this for OS X which enables you to run applications which haven't been ported to the native OS X environment. OpenOffice for Mac OS X uses X11 as do some other applications, such as GIMP, which you may have heard of/used. NeoOffice is a version of OpenOffice ported to the native OS X environment (i.e. it doesn't have to use X11). I haven't used it in a long time - I always use OpenOffice on X11 - but it is supposed to be very good now and should seem very familiar if you're used to OpenOffice. If you can't get OpenOffice to work with your files, you should definitely try NeoOffice before buying MS Office - unless, of course, you especially want to send MS a few hundred of your preferred currency.
The other thing you can try, if you've still got Office on your IBM machine is converting the files there by opening them and choosing "save as...". That should allow you to select an earlier version of Word/Excel/... which OpenOffice should have fewer problems with. Since you may lose formatting this way, try the other options first. (Also, if you have a lot of files, this option will be very annoying to implement.)
I do not think AppleWorks is likely to help. (I'm not sure if AppleWorks is even still available... somebody?) There are some suggestions Pages might help, but I would personally try the other solutions first. (On the other hand, I have a very old version of Pages.)
AppleScript is almost certainly not what you want. It has nothing to do with AppleWorks. It is a scripting language.
Good luck,
cfr

Very new user needs help setting up a three user network plus server

Hi,
I'm an owner/manager of a recruitment company in the UK and we use three mac minis in our office to run our recruitment software (on a filemaker database) internet, mail and MS Office 2008.
We currently use one of the mini's as a 'server' in so much that it has a external HDD attached and shared across the network. We use Airport Extreme to share the internet.
Although to begin with this set up has served us well the amount of data travelling across the network and the prospect of a couple of new employees starting has made me think it's time to invest in a network and server of some description.
With my very limited knowledge i'm proposing the following but would greatly appreciate some assistance from the forum users!
Install OSX 10.5.3 Server on one of the Mac Minis
Get an ethernet switch and cable the three minis together
Use the external HDD as a time machine backup and store all files on the 'server' HDD
Continue to use the Airport Extreme to share the internet over airport.
I have a couple of questions:
Can the Server computer still be used as a desktop or do we need to buy a new mini
Does this set up make the airport base station redundant
As we grow I would envisage enlisting the help of a specialist Mac IT support company but in the mean time any help would be greatly appreciated.
Thank you again in advance.

I would get something better specified than a mini to be my Mac OS X based server, and although you can run it as a desktop I wouldnt advise it.
You ought to go out and buy the book Mac OS X Server 10.5 Essentials - The only Apple-certified book on Mac OS X Server - which Ive found to be a godsend of a book in getting Leopard Server going. Make sure you get the 10.5 version. Im in the UK and got it from Foyles in London.
Your approach is fine, but Leopard Server isnt as plug and go as the rest of Apples products. In particular it just doesnt function correctly if you do not have working DNS before you start. Period. If you dont understand DNS in your office or If having read the book you find its too technical you might be better off buying a no-brand Network File Store/Disk or even a Time Capsule from Apple if its mainly shared disk space that you need.
Angus

CS4 user...need help on CS6 vs. Illustrator CC

Similar Messages

Maybe you are looking for