CS4 will not open Nikon D7000 NEF files; Is there a DNC that will open them?

I have CS4 and Light Room 2
Apparently there is no Camera Raw update for the new Nikon D7000 NEF files for CS4.
I therefore down loaded the Adobe Digital Negative Converter Verson 6.3.0.79 which is compatible with Camera Raw 5.4 or later. 
Using that DNC, when I do step 1, "Select the images to convert" I get the message "No items match your search".  It apparently is not recongnizing the D7000 NEF files.
Is there another DNC that will open and convert the D7000 NEF files?

I just bought the d7000 yesterday and was experiencing the same issue with cs4. I downloaded the DNG converter from adobe and selected the whole folder where the raw files were located (I was unable to select individual images) and it worked fine. It processed the files one by one with new name (without the $500 CS5 pricetag for now). The DNG files open in bridge and psd. Perhaps try selecting the folder?  Good luck.

Similar Messages

  • Currently Have Photoshop CS3 & Adobe Bridge CS3 2.1.1.9. According to Adobe, Camera Raw 4.6 supports Nikon D810 NEF files.  I have downloaded Camera Raw 4.6 Update. When I try to open Nikon D810 NEF files, I get photoshop error that says "cannot complete

    Currently Have Photoshop CS3 & Adobe Bridge CS3 2.1.1.9.
    According to Adobe, Camera Raw 4.6 supports Nikon D810 NEF files.  I have downloaded Camera Raw 4.6 Update. When
    I try to open Nikon D810 NEF files, I get photoshop error that says
    "cannot complete request your because it is not the right kind of
    document. These NEF files wont open in Bridge at all.  What am I doing wrong?

    Camera Raw plug-in | Supported cameras

  • How to open Nikon D7000 NEF Files in Photoshop CS3

    i have installed the 4.6 camera raw update but it does not recognise the D7000 NEF Files... same for Bridge.  what can i do to view files directly in CS3?

    Every camera model must be profiled and specifically supported, and Adobe only updates the current version of Photoshop when they add support for each new camera.  You should upgrade your tools just like you upgraded your camera.
    None of your new camera's NEF files should be viewable by CS3-vintage components, but all of your DNGs should be viewable by such, and if some aren't, then it sounds like your files may be getting corrupted on their way from the camera to the computer.  Are you using a cable to the camera or are you using a card-reader to access the images?  Using a card reader is preferable.  Some cameras have different modes their USB-connection can be in and something other than mass-storage mode can lead to problems.  I don't have a Nikon so am not sure of things more specifically, but if you can use a card-reader and just use Windows Explorer to copy the images that would probably be the best thing.  If you have a new memory card that could also be something to look at.

  • HT201408 My iPad version 6.1.3 will not import Nikon RAW (.NEF) files. Can anyone tell me why I just get red exclamation points and no imports? Discussion areas indicate that RAW files can be imported.

    I am unable to import RAW Nikon (.NEF) files into my iPad version 6.1.3. Can anyone explain to me how to import RAW files? I continually get a red exclamation point with RAW files while jpegs have no problem. Other discussions indicate that RAW files can be imported. Many thanks for yur help.

    D40X support should be available in ACR 4.1. Availability should be by the end of the week, according to dpreview. See
    http://www.dpreview.com/news/0705/07052901adobecameraraw41.asp
    John

  • Opening Nikon D7000 raw files in Elements 8

    I am unable to open Nikon D7000 NEF files in Elements 8. I have been unsuccessfull in downloading the version 5.7 update from the web site. After downloading several times the files are still not recognized in Elements 8.

    I am using Windows 7. I tried selecting the folder that contained the folder holding the pictures to be converted. I then single-clicked the folder holding the pictures and hit select. A message came up stating that the source folder did not contain any supported camera raw files.I have spoken with my Elements software supplier and this is his response:
    "I've done some digging and it turns out the Nikon D7000 wasn't supported in elements until the release of version 6.4 Adobe Camera Reader.So to make sure you have the latest ACR update installed. You can check which one you have by going into elements and clicking Help>About Plug-In>Camera Raw. And if it's not 6.7 then Help>Updates will find it and let you install the latest version. You could also try saving your camera files as .RAW instead of .NEF, and then opening them in elements. Adobe lightroom 4 should already have these plugins available right outside the box, but if you can save the money and run updates instead that would work just fine." I have checked for Elements updates for the Camera Raw plug-in and the message appears stating no updates are available. The camer raw plug-in version is currently 6.1.0.250.
    Date: Fri, 28 Sep 2012 07:35:41 -0600
    From: [email protected]
    To: [email protected]
    Subject: Opening Nikon D7000 raw files in Elements 8
        Re: Opening Nikon D7000 raw files in Elements 8
        created by R_Kelly in Photoshop Elements - View the full discussion
    What operating system are you using?
    The most common cause is pointing the dng converter to the actual files and not just to the folder that the camera raw files are in.
    There is an example of how on a windows system in this thread:
    http://forums.adobe.com/message/4633126#4633126
         Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/4734703#4734703
         Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4734703#4734703
         To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4734703#4734703. In the Actions box on the right, click the Stop Email Notifications link.
         Start a new discussion in Photoshop Elements by email or at Adobe Community
      For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

  • HT3825 I can't open Nikon D7000 raw files in Photoshop CS5.  Any ideas how to do it

    I can't open Nikon D7000 raw files in Photoshop CS5.  Any ideas how to do it

    This page might help.
    Note that your question does not relate to Apple software nor hardware.

  • Cannot open Nikon D4 NEF files

    Cannot open Nikon D4 NEF files in Photoshop CS5 and Camera Raw 6.6 … any suggestions?

    I am now officially perplexed. Tried all of the following
    a) Cleaned up appdata/Adobe/Camera RAW => tried opening the RAW file, (each time a different one so I don't use the same XMP)
    b) Removed the Photoshop preferences file   =>  ""
    c) Removed Registry entry for Camera RAW =>  ""
    d) Uninstalled CS5.5 and re-installed (as suggested by Adobe Customer service folks) => ""
    DIDNT WORK. YES, I USED UPDATE FEATURE IN PHOTOSHOP TO GET LATEST CAMERA RAW, NOT RC
    e) Installed CS6, went straight for updates and it did install Camera RAW 7.1.
    Tried to open the file, same old message.
    And, I also downloaded Lightroom 4.1. Couldn't import the files. Went straight for the update, nope, it said I don't need any.
    It's now been 48 hours into this problem and never been more frustrated.

  • Cannot open Nikon D4 NEF files in Photoshop CS5

    Cannot open Nikon D4 NEF files in Photoshop CS5 and Camera Raw 6.6 … any suggestions?

    Thanks for your reply
    .... strange? in the document you mention above the Nikon D4 is not mentioned as being newly supported and yet when I went to get info about this:
    http://www.adobe.com/products/photoshop/extend.html
    It says that the D4 should be OK in Camera Raw 6.6.
    I confess to being slightly confused.

  • Will there ever be an upgrade for Lightroom 3 that will work with Nikon d800 NEF files?

    Will there ever be an upgrade to Lightroom 3 that will work with Nikon D800 NEF files?

    Why not use Lightroom 4 instead?
    I mean, assuming you can get it running fast enough, you'll usually get better results with PV2012 - right? And in the cases where you prefer PV2010 (if there are any), it's there too...
    R

  • Raw plugin 8.2 doesn't open nikon d800 nef files in photoshop cc and bridge

    raw plugin 8.2 doesn't open nikon d800 nef files in photoshop cc and bridge

    How did you install the plugin?  You may want to try reinstalling it or installing the dng converter, as that is what has the camera formats.  ACR 8.2 is just the plugin for the mechanics of Camera raw.  Normally they should both install, but sometime the converter doesn't.

  • Nikon D7000 .NEF files are not opening

    I am a new, lucky owner of the Nikon D7000 but, sadly, am unable to open my RAW (.NEF) files in iPhoto -- I am told that the files are an "Unreadable" format.
    Now, while I may use the Nikon software provided, I would much rather use iPhoto for my editing.
    Is there anything I might be able to do -- drivers, codecs (?) -- to get this opening?

    I'm in the same boat here. What I've done so far is to use Adobe DNG Converter (free) to convert the NEF to DNG. Then drag the folder with the DNG files into iPhoto.
    With another batch of files I converted to DNG, then did the sorting and editing in Adobe Bridge and Camera Raw. Then converted the whole bunch to jpg and imported them into iPhoto. I also imported only the highest rated DNG images. (Note that any Camera Raw processing will not be used by iPhoto, but it remains in the DNG file)

  • My PS CS6 with camera raw 8.4 will not open Nikon D4s NEF files-

    I have just upgraded from CS 5.1 to CS6.  The initial installation went smoothly and everything seems to work as it should.  The CR was version 7.  I then installed all of the updates using the Check Updates option from the menu.  That went fine also and the CR was updated to version 8.4.0.199 as reported under the About Plug ins.  It will still open my old nef files (Nikon D700) but it will not open files from the D4s, suggesting that I upgrade camera raw.  Now I have also downloaded and installed the latest DNG converter version 8.4.  That will show and convert the older D700 files but will not even show the D4s files In the same folder.  I uninstalled CS6 according to the uninstall instructions and then deleted the folder (Plug ins?) from the Common/Adobe location as instructed, and then reinstalled.  No improvement resulted. This is on windows 7 64 bit system with all updates.

    Glad to be of help. But I'm curious (not critical of what you are doing) to know why so many people like to use Nikon Transfer to transfer their files to the computer. It is still necessary to import them into Lightroom. And, from my perspective, it seems simpler and maybe even a little quicker to use the Lightroom import dialog. I have Nikon cameras, and have never even installed the Nikon Transfer utility. What is so unique about it?

  • Opening Nikon D600 NEF files using PhotoShop CS4 11.0.2 and ACR 5.7.0.213

    Hello,
    I've just bought a Nikon D600.
    I have Photoshop CS4 11.0.2 and ACR 5.7.0.213. 
    With these versions, I'm unable to open the D600 NEF files.  I get the following message:
    "Could not complete your request because it is not the right kind of document"
    Yet I can view the NEFs in other software that pre-dates the D600, e.g. FastStone Image Viewer 4.6.
    Does anybody know if I can get a plug-in from Adobe for PS CS4 that allows me to edit D600 NEFs?
    Many thanks for any help.
    Regards,
    Aisling

    Either upgrade to Photoshop CS6 or download the free DNG Converter and covert your NEFs to DNG.

  • Elements 9 won't open Nikon D7100 NEF files

    I recently upgraded from a Nikon 7000 to a Nikon D7100 DSLR camera.  Historically I was able to open and process NEF files in Photoshop Elements 9 from my D7000.  But now it will not open those files.  I clicked on the Help/Update link and it says my version is fully updated.  What do I have to do to be able to open these NEF files as I did before with those files from my D7000?
    Thanks...RDK

    Support for the D7100 was added to ACR 7.4 so you'll need PSE11 or later to open them directly. You can either use the Nikon software to convert them or the free Adobe DNG converter to convert them to DNG files that PSE9 can open.
    Cheers,
    Neale
    Insanity is hereditary, you get it from your children
    If this post or another user's post resolves the original issue, please mark the posts as correct and/or helpful accordingly. This helps other users with similar trouble get answers to their questions quicker. Thanks.

  • LR/ACR color mismatch with Nikon D7000 NEF files

    I recently purchased the Nikon D7000. The NEF RAW files are not supported in current versions of LR and CS5.
    Downloaded and installed LR 3.3RC. Also downloaded and installed ACR 6.3R1.
    Both work with the D7000 NEF-files with ONE exception. If I shoot a "Multiple Exposure" (one feature of the D7000)  the resulting image in both LR and ACR displays in strong "pink"/magenta. All other images display correctly.
    If I open the pink images in Nikon Capture NX2 2.2.6 they open correctly.
    If I use the White Balance tool (pipette) in LR, I can bring the image back to "almost normal" but the WB values then are Temp: 2150, Tint: -138. Conclusion: the Multi Exposure Image from the D7000 is completely mismatched by LR/ACR. But they are correctly matched by Capture NX2.
    This obviously needs to be corrected before final release.
    Has anyone else expreienced the same? Is there a workaround?

    Can you please supply some sample .NEF images? You can use YouSendIt.com with a target email address of [email protected] Thanks.

Maybe you are looking for