CS4 will not read Canon 5D Mark2's CR2 files

Bought the Canon 5D Mark 2 for christmas.
Am running Bridge and PS CS4
They will not read the camera's CR2 files
The icon of CR2 shows in bridge but wont read the file
I'm on a Mac
Looking for a link to download the update.
Please help!
Nana

If from within bridge you go to Help>Update that should find
the camera raw 5.7 update and install it.
Here's where you can manually download the camera raw 5.7 update if
need be.
http://www.adobe.com/support/downloads/detail.jsp?ftpID=4680
MTSTUNER

Similar Messages

  • ***Bridge CS4 will not show a preview of my .CR2 files***

    OK...
    I have been searching the internet for a couple hours with no luck. Hopefully someone out there can help...
    Equipment:
         Cannon Rebel Xti
         Adobe CS4
         ACR Plug-in 5.5 (latest update installed in its CORRECT place!)
    When i open Bridge CS4 all my raw or .CR2 files dont have a preview. Im thinking it could be because the adobe website says that my Rebel Xti minimum ACR plugin is version 3.6? But dont all the later versions support it anyway?? So 5.5 should work right?? Im at a loss if you have any insight at all that would be great!!!! Thanks!!!!!!!!!!!!

    Hi Robert
    Had the same problem this worked for me.
    start up bridge go to preferance/advanced and tick the selection Generate Monitor size previews.
    Regards
    Tony

  • Photoshop CS4 will not read Raw files from Nikon D60. [was: No automatic updates for my PS CS 4  on windows (for reading .Nef files)?]

    Hi
    I have been using PS CS4 for several years.
    Yesterday, I went to PS CS4 help and selected "updates", but I get the message "There are not updates available at this time; Please note that some updates for the following products cannot be determined at this time: Adobe Updater".
    I need the updates because I just purchased a Nikon D60 and my Photoshop does not read the .NEF files produced by the camera.
    any idea, please?
    thanks

    I need the updates because I just purchased a Nikon D60 and my Photoshop does not read the .NEF files produced by the camera.
    Camera Raw plug-in | Supported cameras
    Camera Raw-compatible Adobe applications
    Do you really mean the Nikon D60 which shipped in 2008? Was it purchased secondhand?
    The Nikon D60 was first supported in Adobe Camera Raw 4.4.
    Photoshop CS4 ships with Camera Raw 5.0 so it can read D60 NEF files out of the box. No updates required.
    If you do mean the D60 then something else must be going on. e.g. are you using Nikon software to transfer files from camera to computer?

  • Cs4 will not load cannon 5d mark II raw files

    I had to reload cs4 and now it will not load a raw file from the 5d mark II. It worked fine before I reloaded it. I am using windows 7 and it will look at the raw files ok. I tried downloading the raw programs from microsoft and adobe.

    Update Camera Raw...the current version for CS4 if Camera Raw 5.6.

  • Bridge and Photoshop CS4 will not recognise the images shot in NEF file

    Shot in Nikon D810 with NEF file but the images will not recognise with Bridge and Photo
    shop CS4

    That camera was recently supported for the first time by ACR 8.6, which needs at least CS6 to run.  You will never be able to open those raw NEF files in CS4, as there will never be an update for CS4.
    Your choices are to upgrade, or to use the free, stand-alone Adobe DNG Converter 8.6 on each and every batch of raw NEF files in order to convert them to raw DNGs that you can open in CS4.
    Mac:
    Adobe - Adobe Camera Raw and DNG Converter : For Macintosh : Adobe DNG Converter 8.6
    Windows:
    Adobe - Adobe Camera Raw and DNG Converter : For Windows : Adobe DNG Converter 8.6

  • Camera raw will not read my cf

    i have been using camera raw for 1 yr. great no problems, my computer crashed and had it reworked at my repair guys. all adobe was removed in the process. i reloaded my same discs from last year, cs4 will not read my canon 5dmark 2 compact flash files. it is fine all other ways. i shoot in raw on the camera. 2 weeks ago all was good. i have a wedding that needs to be processed and i cant read the any of the past year's raw files.

    Windows:    http://www.adobe.com/support/downloads/detail.jsp?ftpID=4681
    Macintosh:  http://www.adobe.com/support/downloads/detail.jsp?ftpID=4682
    -Noel

  • Photoshop Elements Organizer 9 will not read in Canon 70D raw files. All updates have been made.

    Photoshop Elements Organizer 9 will not read in Canon 70D raw files. All updates have been made.

    The Canon EOS 70D was first supported in Camera Raw 8.2 (the plugin used by Photoshop Elements to read Raw files)
    http://helpx.adobe.com/creative-suite/kb/camera-raw-plug-supported-cameras.html
    Camera Raw 8.2 is only compatible with Elements 12 and later. It is not compatible with Elements 11 or earlier.
    http://helpx.adobe.com/x-productkb/global/camera-raw-compatible-applications.html
    Your choices:
    Upgrade to Elements 12 to open 70D Raw files in Elements
    Download the free Adobe DNG converter, convert all 70D Raw files to DNGs then open and edit the DNG files in Elements 9
    http://www.adobe.com/products/photoshop/extend.displayTab2.html

  • CS4 will not recognize my Canon HV20

    CS4 will not recognize my HV20.   CS3 does.   Am I doing something wrong?

    Great analogy!! 
    I have CS4 installed as a trial, with Cineform HD 4.1.  Both have current updates.
    The HV20 is recognized on CS3, and imports into CS3 without a problem.
    The cineform intermediate file clips are not redlined in the timeline/sequence in CS3, but they are in CS4
    after using HDLink from Cineform to capture the footage.
    HDLink recognizes the camera.
    CS3 recognizes the camera.
    Project settings are 1920x1080 cineform HD
    No matter what settings I use the camera is not recognized.
    Firewire cable is good...works in CS3.
    Also, Cineform PanZoom effect causes CS4 to crash, other cineform effects
    work ok.
    Exporting the project using  media encoder in CS4 also ends in errors and
    crashes with all different types of export settings.
    Equipment:
         Core2/quad Q6600
         D974xbx2kr Intel board
         8 g memory
         Separate scratch disc raid 0 array
         Windows 7 64bit
         EVGA 8800GTS
    Is Cineform not installed correctly?  CS4 project settings menu has Cineform options listed, so its there.  All of the Cineform effects are
    there.  I have not tried all of them, but Pan and Zoom definitely causes a crash, whereas cineform color effects work, cineform 32 bit dissolve
    works...
    Cineform support says its an Adobe problem......
    I appreciate your help.

  • CS4 won't read Canon T1i raw files

    CS4 won't read Canon T1i raw files. Is this a known problem? Is there an update or plugin that I need to download? If so, where can I find it? Thanks for your help.

    T1i support was added in Camera Raw 5.4. It sounds like your Camera Raw may be out of date.
    From within Photoshop, choose "Updates…" from the Help menu. It'll do its thing and eventually Adobe Updater should tell you updates are available. Run through that install process and you should be set to go.
    Note that you will have to quit Photoshop during the installation process, so make sure all your work is saved.

  • My logic board was replaced on my Mac and now my CS4 will not open. I re-downloaded it, gave the serial number, but it still won't open.  Now what?

    My logic board was replaced on my Mac and now my CS4 will not open. I re-downloaded it, gave the serial number, but it still won't open.  It said that the licensing had expired.  But this is not the case.  Now what?

    uninstall, clean (Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6) and then properly install (do not migrate, use timemachine etc) using the installation files.
    Downloadable installation files available:
    Suites and Programs:  CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4 | CS3
    Acrobat:  XI, X | 9,8 | 9 standard
    Premiere Elements:  13 | 12 | 11, 10 | 9, 8, 7 win | 8 mac | 7 mac
    Photoshop Elements:  13 |12 | 11, 10 | 9,8,7 win | 8 mac | 7 mac
    Lightroom:  5.7.1| 5 | 4 | 3
    Captivate:  8 | 7 | 6 | 5
    Contribute:  CS5 | CS4, CS3
    Download and installation help for Adobe links
    Download and installation help for Prodesigntools links are listed on most linked pages.  They are critical; especially steps 1, 2 and 3.  If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

  • Mavericks X  CS4 will not launch

    I just upgraded my Mac OS to Mavericks X, and now Photoshop CS4 will not launch. It does absolutely nothing when I click on it.
    As a pro photographer, I NEED this, above all else, to work on my computer!
    Bob

    Try reinstalling from your discs or download a fresh Photoshop Mac CS4 installer.
    Download CS4 products
    Let me know how it turns out.

  • Photoshop CS4 will not launch after installing Yosemite.

    Photoshop CS4 will not launch after installing Yosemite. All the other CS4 apps open. I upgraded Java. Genius Bar could not get it to launch.

    Here's the fix I found, by way of an explanation...
    Snow Leopard prompted me on my first startup with the following error:
    "There is a conflict with the _______ font file. This font file contains a font name that conflicts with a system font required by Mac OS X to display onscreen text. You should move this font file to the Trash."
    The fonts it said were conflicting: Helvetica, HelveticaNeue.dfont, Lucida Grande, and Monaco. I figured Snow Leopard probably wanted to replace these fonts with newer versions, and so I clicked "Move to Trash" on all four.
    Apparently 10.6 trashed these fonts but didn't replace them. This was causing Photoshop to crash on load.
    So I restored my ~/Library/Fonts folder from a backup made just before upgrading and this time after a reboot I said "Allow Conflict" on all four dialog boxes and launched Photoshop... everything is back to normal!
    Not sure what kind of "conflict" it's referring to, but apparently moving these font files to the trash as OS X prompted me to do broke a number of apps. Should I report this as a bug?
    Thanks for the ideas!

  • Bridge CS4 will not Launch

    Recently I tried to upgrade my Mac G4 Tower from OS 10.4 to OS 10.5 and it failed, even though I met all requirements. I had to reinstall 10.4 and now Bridge CS4 will not launch.  It worked fine before. I uninstalled PS CS4 and reinstalled it, I tossed prefs & cash files, I reset prefs but still no luck. Any suggestions before I strip down the whole HD and start from scratch?
    gardon4

    Any suggestions before I strip down the whole HD and start from scratch?
    My first go would be to buy a new HD and replace this with your current in
    the G4 and give a clean install of 10.5 to try if it will work.
    If you downgraded without a clean install from scratch you sure will end up
    with conflicting settings for applications.
    You could try to back up all custom settings, actions, tools etc and then
    deactivate the suite with erase serial number.
    Then find the clean tool for Adobe
    http://www.adobe.com/support/contact/cs5clean.html
    and run this script, it says CS5 but to my knowledge it also finds files for
    the CS3 and CS4 suite. Do a search for any adobe files from user and system
    library and delete those also. Then install the CS4 suite again.
    But again to be honest, you are using a computer that in current digital
    terms dates from the 'stone age' and in now way can cope with the needs for
    the use of digital files nowadays. It might be wiser to try and find a used
    MacPro (or even a used iMac with intel processor) that will give you much
    more profit in speed, disk space and processing  instead of investing more
    time and money in new disks and install procedures...

  • Photoshop CS4 will not Start

    Hi, i'm usually quite responsible when it comes to making sure my system can coap with what i am asking of it, but i've ran into a problem that my computer just can't seem to get around, and means that photoshop cs4 will not start up.
    I've been making .PAT files from a few pattern sourcebooks i've recently brought. The first two went fine, but a japanese sourcebook contained 250 reasonably hi-res pattern images which i put through an automated action which set them all as patterns for me for the Pattern Overlay option in beldning options. When i did this i noticed my computer started to slow down near the end of the process, so i saved out the .PAT file from them, and quit photoshop to free up over 2.10GB worth of data. I have 4GB on a 32bit XP, but only 2 and a half-ish is seen by windows due to the hardware installed aswell. Of course i plan to chnage this to 64bit soon, but anyway, when photoshop now is told to start up, it reads everything normally, then gets to "Reading Preferences", and crashes with an error report, which watching my task manager, i belive to be linked to memory shortage from having to load the patterns up.
    I reset my preferences to see if it would set them all back to default and not read the added pattern files, but that made no difference. Any ideas?
    Thanks in advance!!

    I'd look into doing a couple of tests:
    1.) Move those PAT files elsewhere
    2.) Eliminate all programs and Processes, that are unnecessary. Task Manager>Processes will give you a list of all that load, and you can probably stop half of them with no ill effects. I'd use MSCONFIG, so you can go back and easily activate them later.
    3.) Reboot and see what happens.
    Note: John's suggestion on the Presets folder might address #1, but I'd also physically Move them. It sounds like you're running totally out of resources to run PS, so Textures, and such, might be an issue too.
    A question: how are your Scratch Disks setup and please tell us about your I/O sub-system, i.e. the internal HDD's, their size, free space, speed, controller type and how these internal HDD's are allocated. Especially tell us if you have any physical HDD's partitioned.
    Good luck,
    Hunt

  • Photoshop CS4 will not refresh or update view

    Hello,
    My Photoshop CS4 will not update / refresh the viewport after any change to the layers or settings. The view will only refresh if the view is changed, such as the hand or zoom tool. This makes Photoshop nearly usesless. Did some looking around the net and have seen a few responses to situations similar to this but none of them are regarding a Mac. This is my work computer so you can understand my frustration.
    Hardware Overview:
      Model Name:    Mac Pro
      Model Identifier:    MacPro4,1
      Processor Name:    Quad-Core Intel Xeon
      Processor Speed:    2.66 GHz
      Number Of Processors:    1
      Total Number Of Cores:    4
      Memory:    6 GB
    NVIDIA GeForce GT 120:
      Chipset Model:    NVIDIA GeForce GT 120
      VRAM (Total):    512 MB
      Vendor:    NVIDIA (0x10de)
    LED Cinema Display:
      Resolution:    1920 x 1200
      Depth:    32-Bit Color
      Core Image:    Hardware Accelerated
      Main Display:    Yes
      Mirror:    Off
      Online:    Yes
      Quartz Extreme:    Supported
      Rotation:    Supported
      Connection Type:    DisplayPort
    Any ideas on how I can solve this would be greatly appreciated, I need to use PS on a daily basis here and this is killing me to be unable to use it.
    Thanks,
    Isaac
    Designer at The University of Texas at Dallas

    DesignbyIsaac wrote:
    NVIDIA GeForce GT 120:
      Chipset Model:    NVIDIA GeForce GT 120
      VRAM (Total):    512 MB
      Vendor:    NVIDIA (0x10de)
    I do not see that card in the list of supported cards:
    http://kb2.adobe.com/cps/405/kb405711.html
    Mac OS graphics display cards We tested the below cards on Mac OS 10.5.4 and 10.4.11.
    The following cards were tested only on Mac OS 10.5.4: 8800GT, iMac 8800 GS, and 8600M.
          MACTEL iMac 8800 GS 512 MB
          MACTEL 8800 GT 512 MB
          MACTEL Radeon x1900 512MB
          MACTEL nVidia Quadrofx 4500 512MB
          MACTEL nVidia 8600M 256MB
          PPC nVidia 7800 256MB
          MACTEL ATI HD 2600 MAC 256MB
          17" MACTEL iMac x1600 128MB
          Macbook Air intel GMA X3100
    Note: Due to technical issues we enable OpenGL for the 7300GT, but we had to disable Advanced Drawing and 3D Acceleration.

Maybe you are looking for

  • Getting Ora 01843  not a Valid month Error

    Hi I was trying to assign the data in MM/DD/YY format from a date value '09/25/2009'.. I cannot Obain the result i always get this ORA-01843: not a valid month May i ask you kindly to help me out here. Below is the code Snippet; DECLARE lv_date DATE;

  • Global Variant for Query

    I am on BI7. In Query Designer, I have created a Variable for each of the Characteristic on my query. when I run the query, I can now enter the parameter for each of this Characteristic and Save it as Variant. When I run the query again, I can select

  • Need output like below mentioned format

    Hi, By using below query , iam getting output in the below formate as metioned select m.year "Year", --decode(m.year,like '200%','a') "DG", --decode(instr(m.year,'200'),0,Null,'Shallow Water <1000 Feet') "DG", --decode(substr('Shallow Water <1000 Fee

  • Data Migrator

    what is Data Migrator? and where i can find stuff on it

  • Working with imported Word documents

    I've noticed that Pages (for iOS) gets very slow and laggy -- especially the on--screen keyboard -- when working with imported Word documents. Is there a method to convert imported files to native Pages documents, and thereby maybe speed up the app?