CS5.1 Fireworks edit loses images?

I create a slide show with Fireworks - Black (flash plugin not required)
everything goes fine
I want to add some slides or edit the captions and I open an existion slideshow
everything is there, I do the editing and hit the create button. When I launch in the
brouser, all the images and thumb nails are gone and I see a boxes with a little X
in the corner. Any idea what is happening. I have tried everything I can think of.
Eyedahoan

This is a thread regarding Text tool problems in FW CS4 on Snow Leopard. Perhaps it's relevant?
http://forums.adobe.com/thread/493212
http://blogs.adobe.com/sarthak/2009/10/fireworks_cs4_text_tool_on_sno.html
I was also curious: Where are the additional files you mentioned being created?

Similar Messages

Why won't my edited RAW images show after a LR re-install onto a new Hard Drive?

Hi there. Recently my hard drive took a (hike) and crashed - data may or may not be recoverable (Geeks are working on that), and I needed to reinstall my CS5 and Lightroom software to a new hard drive (I had to buy a new one). All of my RAW photos are stored on an external drive and were not harmed, thankfully. Here is my dilemma. Most of the presets I used also went crashing with that hard drive, (yes I believe they were backed up but also on that hard drive...stupid I know-trust me I know!!) but most of them were the free ones from the adobe recommended users on this site. I actually found many of my favorites still posted on the Adobe site and re-downloaded and installed the presets I'd been using the past year and a half, and imade sure those presets were housed properly in their folder via Preferences in Lightroom. Great. I can continue on with my work. WRONG! When I went to go import a recent shoot that I had already edited, it imported the RAW files but none of the previous edits I had worked on for these photos were showing up...it was as if I didn't even touch them and they came right from my camera. What in the world is going on? I'm baffled...and freaking out as I have thousands upon thousands of edited shoots in RAW, and I fear that none of the edits and enhancements made to those photos are going to be present and I'll have to start over. Please tell me that all of my last 2 years of editing photos are still with the RAW files?!!!
I found a deal on a an HP Intell Core i7 processor) 2 TB hard drive tower, so I ended up needing to install the 64 bit versions of CS5 and Lightroom 3.6.
I did test out the RAW (.NEF) file in Photoshop CS5 and my edited RAW image came up "correctly" - so I know that the information is still with the RAW image...I just need it to work and show in lightroom, as it is easier to export the files to the sizes I need them to be.
Please be kind in your replies...I appreciate any help/guidance I can get on this. Plus the photos I need are for Seniors graduating in a few months here so you can imagine the panic mode is just a bit higher than normal. Many thanks.

The default location for the backups created by Lightroom on exit is in the same folder as the catalog itself (i.e. that would be on the same faulty drive). It is, however, possible to redirect those backups to a different destination, such as a different hard drive.....but only you know if you did that or not. Do you have any other backups, e.g. drive level backups?
Just to be clear, if you are importing afresh into a new catalog from Raw files that do have XMP sidecar files, you should see the final edited state from the previous catalog, but you won't see the individual history steps that got you there (as that's one of the things that are not included when you write XMP data from within Lightroom). If there is no XMP sidecar, you'll just get the original OOC image.

Hi I have a question about shooting in Raw with my Canon EOS 6d. I'm in the process of learning photography and my goal was to start shooting in raw. I have Photoshop CS5. When I tried to edit my images in raw I received an error message stating, "The pho

Hi I have a question about shooting in Raw with my Canon EOS 6d.
I'm in the process of learning photography and my goal was to start shooting in raw.
I have Photoshop CS5. When I tried to edit my images in raw I received an error message stating, "The photoshop camera raw plug-in did not recognize the format. If these files are from a camera, you may need to update your camera raw plug in."
In researching the issue I read that to edit in raw you need a camera model requirement of at least 7.3 which only works with CS6. My version of CS5 is 6.0.0.205. Being new to all this I see that my options are to upgrade to CS6 or convert by using DNG converter and paying a monthly fee. Two things I know nothing about and don't know which is would be more beneficial.
I'd appreciate any advise on which route to go and how upgrade and what it may cost. THANKS in advance!
Heather

In researching the issue I read that to edit in raw you need a camera model requirement of at least 7.3 which only works with CS6.
That is correct. Your camera was first supported by Camera Raw 7.3. Camera Raw 7.3 will not work with CS5. You need CS6 or CC.
Being new to all this I see that my options are to upgrade to CS6 or convert by using DNG converter and paying a monthly fee. Two things I know nothing about and don't know which is would be more beneficial.
I'd appreciate any advise on which route to go and how upgrade and what it may cost.
It all depends on your preferred workflow and your budget.
Using the DNG converter is free. There is no monthly fee. You use the converter to convert all Raw files from the EOS 6D to DNGs then edit the DNGs in CS5. That's an extra step every time - every photo. Some people don't like the extra step. Others don't mind.
Camera raw, DNG | Adobe Photoshop CC
Or you can upgrade to CS6 (non-Cloud) and pay the upgrade fee
Creative Suite 6
Or join the Cloud and pay the monthly fee
Or join the Photoshop Photography Program (US9.99/month) and get PS CC+LR

I am unable to edit an image in Photoshop.

I just installed Lightroom 5.3, and I have Photoshop CS5.1 installed. The problem is that I am unable to edit an image in Photoshop. When I click Photo>Edit In, the option for Photoshop is not active (i.e., it's not black), so I can't click on it. Why are the options for Photoshop and all of the other Photoshop related options, such as Merge to Panorama, etc., not active? In Preferences I have the following settings: File Format = TIFF; Color Space = ProPhotoRGB; Bit Depth = 16 bits; Resolution = 240; Compression = None. I am using Windows 7.

Chris:
I have to apologize for being misleading on my request for help in
resolving the problem.
Actually the version I am using is CS2 not CS3.
Yesterday I tried numerous times, and ways, to edit an image and each time
it refused to allow me to save it.
The software program just shut down. This evening when I decided to give it
another try it worked perfect.
Guess the program just took the day off.
Thank you for offering to help
Regards,
Doug

CS5.5 Premium Edition - Mavericks or Yosemite?

Re: Creative Suite CS5.5 Design Premium (Students and Teachers Edition).
So after waiting for a while before considering to update to Yosemite and reading many forum posts here and other forums on the web saying how easy it was to update with no problems and everything works as it should be, just update the Java etc, along with the heart ache and posts saying don’t upgrade, programmes not working, CS5.5 is now longer supported and people saying that they are reverting back to Mavericks and advice saying look on Roaring Apps to see compatibility issues, which to be honest is inconclusive at the moment.
Among those people who are still using the CS5.5 Premium Edition Creative Suite and individual programmes, what is the general opinion, is it now safe to upgrade to Yosemite or is it better to stay with Mavericks?
I could do with adding a Poll here to get some kind of insight on what forum members recommend.
Look forward to your replies.

This is addressed to anyone who wants to help. (Hi Bob, you seem to be on this forum a lot.)
Here's my sad story:
I bought the Creative Suite 5 Design Premium Teacher/Student version last year from a guy with a good sales reputation stats on EBay. He wrote that he's a trainer for the Navy and when he tried to register it, found out that his service to his country as a teacher-trainer didn't qualify him for the discounted version.
I bought it and when I started back in school last week, I got a message from Identit-e that it was already registered.
Trying to give the seller the benefit of the doubt, I wrote Identit-e back and asked if the registration was successful or whether it was aborted because the guy found out he's not eligible.
They wrote me back and said that his registration was rejected because he was ineligible. AND, that the software has been registered and I can't register it. --Say what?!
I called them on their logic and they wrote back they won't respond anymore. Case closed.
So, being as Adobe told me the other night I'd have to take the issue up with Identit-e, and Identit-e has responded how it has -- I seem to be screwed here. I don't have money to blow like this -- I'm unemployed and trying to retrain myself and get employed again by going back to community college.
I'd like to keep a high opinion of Adobe and that it does have some caring customer service in addition to great products.
WHY would they associate themselves with such a shameful, loser verification company??
Can anyone out there help me?! ADOBE?!?
Thank you.
Veronica

Dreamweaver CS6/Fireworks building animated image

Have a JPEG photo and want to add an animated image to it. When trying to do this in Dreamweaver I am unable to add the GIF to the photo. When I build it in Fireworks, while I can add the gif to the photo, when I export it to dreamweaver It loses the movement. even when I add it in fireworks it loses the mvement. How can I correct this?

I have converted my image to a GIF but Dreamweaver will still not allow adding a GIF animated image to the converted image. It can be added in Fireworks but the animation is lost when exported to Dreamweaver.
The photo image is a Chinese parade dragon which had been saved as a JPG file. I converted the file to a GIF. What I am trying to do is add a moving eyeball GIF to the dragons eye but dreamweaver is not allowing placement of the animated GIF anywhere inside the converted photo image.
Sent from my iPad

Further editing in CS5 after L4 editing.

After editing an image in L4 I transfer it to CS5 but the L4 edited version isn't the image that appears. Something happens during transfer that neglects to copy the complete L4 edited version. My CS5 is up to date regarding updates and my L4 is an upgrade from L3. I would appreciate any help in solving this problem.

Let Lr render the Tiff before sending to Ps.

CS5 Student & Teacher Editions & Commercial use (in Australia)

specifically student editions not educational version.
I know that in CS4, commercial use is only valid in the USA.
It looks like the older "education version" is no more in CS5 and is replaced? by "Student & Teacher Edition".
I have read in the FAQ from the USA Adobe website that this is allowed for commercial use:
http://www.adobe.com/education/students/studentteacheredition/faq.html
I have also seen the UK Adobe site that it is allowed for commercial use:
http://www.adobe.com/uk/education/students/studentteacheredition/faq.html
the image is broken on this link. is this just a template that has been copied over from the USA website? or is this the official thing?
I am from Australia and the FAQ has not been updated and still shows information for CS4.
clicking on FAQ from this link on the australian site of Adobe links to the CS4 FAQ:
http://www.adobe.com/ap/education/solutions/students/studentteacheredition/
which is this link: http://www.adobe.com/ap/education/students/studentedition/faq.html
though after some digging I have found the Australian link to the new FAQ but it also has a broken image and im not exactly sure if its the read thing or just a template again:
http://www.adobe.com/ap/education/students/studentteacheredition/faq.html
they all state:
Can a student or teacher use the Adobe Student and Teacher Edition software for commercial use?
Yes. Those who purchase this product can use it for personal as well as commercial use.
I havent found anything about "only in north america" stuff.
anyway, i would assume that any purchase of CS4 now would have a free upgrade to CS5, right?
If i purchase CS4 student edition (which here in australia isnt allowed for commercial use) and then get a free upgrade to CS5 (student & teacher edition (i would assume this would be the version CS4 student edition would get for the free upgrade? and assuming that commercial use of CS5 is now allowed in Australia for Student & Teacher Edition) would that mean that I can now use my CS4 student edition that was originally not allowed for commercial use then now be allowed for commercial use when upgraded to CS5 student & teacher edition?
I hope that makes sense and doesnt confuse too much.
I also posted up a thread about my eligibility if im a student that has finished classes and waiting to just graduate now. I was wondering if I may still be considered an eligible student to purchase.

Hi, I think I have found an answer to this but I would still like to have it confirmed by someone from Adobe (please).
I found a post at http://www.hellophoto.co.nz/showthread.php?3223-Lightroom-3-is-now-out&p=32387#post32387
Where someone in the forum says they contacted Adobe NZ about this:
I asked Adobe about the answer to the question about commercial useage - this was the reply I got
This has caused some confusion as we have recently
changed the policy around this. You are correct that it used to just be
in the US however in CS5 we have changed this to be the case for all
regions.
In NZ Student and Teacher licenses can be used
for commercial use both during study and after students or teachers have
finished/left. I.e. a teacher can do freelance work on the side and
still be eligible for the student and teacher pricing.
When the next version of CS is released students
who have finished their studies or teachers who have left the institute
can upgrade to a commercial version at the upgrade price.
We do not require them to upgrade so if they wish
they can stay on CS5 indefinitely, when they do decide to upgrade they
will need to purchase a commercial license. We have tiered upgrade
pricing though so it works out cheaper for them if they do upgrade
straight away.
The main condition for Student and teacher is
that it is installed on a private computer so cannot be installed at an
institute (school, uni or poly). Instead, educational institutions must
purchase the Education version.
Student and teacher licenses are for home use on
private computers for educational or commercial purposes for that one
person. There is no serial number in the box and verification is
required.
Educational licenses are for use on an education
institute’s (schools, unis or polys) computers, this is for educational
use only and does not include commercial use. Single teachers should not be purchasing this type of license, the only people who should be buying educational licenses are educational institutions.
I teach Photoshop and Illustrator at a Uni in Australia and would really like to be able to tell students if they can use the Student and Teacher editions for commercial use - If the above is true I think this is a very clever move by Adobe but it would be really good if they made it a bit clearer.

Lightroom 5.4 jumps to second monitor when attempting to edit an image in Photoshop CS 6.

Hello,
I have a brand-new HP z620 with an Nvidia Quadro K 4000 display adapter and apparently a software and/or hardware conflict.
I am experiencing an issue with Lightroom 5.4 window not working correctly with my second, not primary, monitor. When Lightroom is working on the second monitor and I need to edit an image in Photoshop cs6, I want Lightroom stay where it is and Photoshop to open on my primary monitor. And this has worked well for me on my previous system which was also a Windows 7 64-bit machine with an Nvidia GeForce GTX 570.
When I click the Lightroom option to "edit in Photoshop CS 6” The Lightroom window will move itself to the primary monitor for no apparent reason. This is the problem I am seeking to remedy.
No other external editing programs opened through LR behaves this way, such as NIK or OnOne Perfect Photo Suite, and I really need LR to stay on the second monitor on the extended desktop.
I’ve tried every monitor cabling setup I could think of to try and even unplugging the primary to make windows identify it as the 2 monitor in the screen resolution settings, but that does nothing for me. My new workstation is running the same OS version and a K4000. Monitors are currently connected to the display ports via dp to dvi adapters. I’ve already tried moving the connections around and plugging one into dvi, there doesn’t seem to be a setting I can change within windows or adobe to change this behavior.”
On a related note, I have similar instability in software made by X-rite that supports the use of a colorimeter allowing me to build profiles for monitors and evaluate colors precisely. During the profiling process I place the colorimeter in the designated place on the secondary monitor and direct the application to begin showing the colorimeter different colors on that monitor. At this point the colors jump to the primary monitor while the rest of the interface along with the colorimeter is a secondary monitor. I have a workaround that I'm using for this particular problem but I am fairly sure that the issue that causes the problem with Lightroom is also the source of my trouble here and I need to eliminate it.
thanks for your time,
Larry Garvey

Change the sort order. View->Sort

I am using Lightroom 5 and am hapy about it, but recently I hav encountered a problem when trying to edit an image in another program, i.e. Elements. I used the clone tool, saved the result and went back to Lightroom to open the image there. I did find a

I am using Lightroom 5 and am hapy about it, but recently I hav encountered a problem when trying to edit an image in another program, i.e. Elements. I used the clone tool, saved the result and went back to Lightroom to open the image there. I did find a second copy, but this is identic with the one I already had in Lightroom, and I can see noe result of the clone process.

At the moment I would say it is uncertain whether Acrobat is completely ignoring the change, or whether the changes you are making aren't affecting the ink density. I have a suggestion for a test you could make to see which is the case.
When editing in Photoshop just add a box or mark on the image, for your tests.
- If this box does not appear in Acrobat, you know Acrobat is not seeing the edit
- If this box does appear in Acrobat, you know the problem is that your tool for changing ink densities is not taking effect.

I Have a Mac 10.9.5 I have Photoshop CS 5.. Also have Photoshop CC. As of last month was able to edit any image with either program,as of today I can't edit images in either program. I can't see and editing I've done ,but when close the image both program

I Have a Mac 10.9.5 I have Photoshop CS 5.. Also have Photoshop CC. As of last month was able to edit any image with either program,as of today I can't edit images in either program. I can't see and editing I've done ,but when close the image both program ask (do you want to save changes) I look at the image I don't see any changes to save. Please help Thanks for time in advance

Please describe the steps involved in the issue exactly (with screenshots maybe).
What have you done for trouble-shooting so far?
http://blogs.adobe.com/crawlspace/2012/07/photoshop-basic-troubleshooting-steps-to-fix-mos t-issues.html

Cant figure out how to edit raw images

I am using a windows computer and have Photoshop elements 10. I'm trying to edit raw images but every time I try to open a RAW file it says that its the wrong type of file. I tried downloading Camera raw. Elements 10 is compatible according to adobes' site, up to camera raw update 6.7, and that's the first version that my camera (Sony a-57) is compatible with camera raw. I followed the troubleshooting help and ended up deleting and re-installing Photoshop elements but it still says that its the wrong type of file and wont let me open it.

Which version of windows are you using?
This is the camera raw 6.7 updater you tried?
Adobe - Photoshop Elements : For Windows : Camera Raw 6.7 update for Elements 10
I'd try running the above 6.7 camera raw plugin updater from the linked page above.

How to create a Contact Sheet with Adobe Photoshop CS5 from a disc with images in different folders

I got a disc with images files (mainly ai and psd files) in different folders and subfolders, how can I create a contact sheet including all the image files in different folders. (It seems that Adobe Bridge can only create a contact sheet by clicking the image files directly but not a folder including the images files)
thx!

Use the optional Contact Sheet II plugin which is found in Adobe's Downloads:
1) search for contact sheet in PS CS5 help
2) choose the first result and read carefully about the Photoshop Optional Plug-In Picture Packager
3) follow the instructions to download the zip file and note the location that you download it to.
4) follow the instructions to install the files.
I'm not sure how PS CS5 will handle ai vector image files or if you have to batch convert them to raster images first before using Contact Sheet II. Contact Sheet II allows you to choose a folder and Include All SubFolders as an option so you could create a Contact Sheet folder and copy all of your desired folders into that folder which will become subfolders of the main folder you choose for your contact sheet.

After editing an image in Photoshop it appears grayed out inside the media browser

After editing an image in Photoshop it appears grayed out inside the media browser when I try to import into Facebook (ie.).
What has to be done in order for me to be able to select my edited images from Photoshop whithin any media browser?

function(){return A.apply(null,[this].concat($A(arguments)))}
LarryM01 wrote:
...save it as sRGB?
Would you care to comment on why there is an advantage to do this little extra job?
Perhaps you don't want to hear from me, I don't know.
I'll answer just this one little question. Try to get your mind around what color management does, I promise it does make sense (outside of unexplained problems on particular computers).
You want to save your web image with the sRGB profile embedded because some Internet browsers are color managed, and with an embedded profile it's more likely someone will see your image colors just as you intended.
The assumption is that a lowly windows user with a cheap monitor and Internet Explorer will be seeing any image you save as "roughly" sRGB anyway. Tagging the image with sRGB only affects those with color-managed browsers.
You're looking for the most possible consistency for the viewing audience.
-Noel

When editing an image in Photoshop from Lightroom then saving it back to Lightroom, how do i get the image to go back and sit next to the original? Mine is going to the end of the folder. Thanks Karen

When editing an image in Photoshop from Lightroom then saving it back to Lightroom, how do i get the image to go back and sit next to the original image? Mine is going back to the end of the folder. Thanks Karen

Hi Karen
You may the sort set to Custom. Click the dropdown menu on the toolbar (to the right of the word sort) and change to capture time.
If you can’t see the toolbar above the filmstrip press the T key. Press T again to hide.

CS5.1 Fireworks edit loses images?

Similar Messages

Maybe you are looking for