CS5.5 Extended - problem with importing audio .mov files

I would like to import an audio file to my PS5.5 Extended. It supports .mov files, so I tried to File->Place a mov file exported from Audition CS5.5. But Photoshop says: "Could not place the document xxx.mov because the movie file could not be opened."
The mov file doesn't open in Windows Media Player either and the message is that the codec is unknown. But it opens without problems in QuickTime, as audio.
I am not sure if this is Audition or Photoshop problem, but the format, or codec which is used should be common to both programs, as they are from the same CS5.5 suite. By the way, I have all settings set to default in Audition. No idea what codec it is using.
My purpose is to import sound, and because PS Ext does not support sound files as such, I found a workaround in the internet to import a mov file. But it does not work for me..

Read Bill Hunt on a file type as WRAPPER http://forums.adobe.com/thread/440037
What is a CODEC... a Primer http://forums.adobe.com/thread/546811
What CODEC is INSIDE that file? http://forums.adobe.com/thread/440037
Report back with the codec details of your file, use the programs below
For PC http://www.headbands.com/gspot/ or http://mediainfo.sourceforge.net/en
For Mac http://mediainfo.massanti.com/
Do you have Quicktime installed?

Similar Messages

A problem with importing layered PSD file into Flash

Hi.
There's a problem with importing layered PSD file into Flash.
If I import a layered PSD file, some part the color of the lower layer is shown at the edge of objects or shadows. Instead, if I crop each layers first and import them, there's no problem.
If the higher layer has brush or transparent effects, it becomes worse.
Any help with this problem?
Thanks.

How was the original art created? Was the original RGB or CMYK? What is the resolution of the Photoshop file? Flash only works well with RGB and 72 pixel per inch resolution. If your original art is not set this way, then Flash will attempt to convert it as it imports it. Flash uses the sRGB color space. You'll get the best color translation if your Photoshop file is using this color preference.

HT204382 Hi, Ive just got myself a Macbook Pro, and Im having problems with sound on movie files. The format is wmv and they play OK on a windows 7 laptop, and Im trying to play them now on the MAC. The picture is OK , but no sound. I have Flip4Mac - no d

Hi, Ive just got myself a Macbook Pro, and Im having problems with sound on movie files. The format is wmv and they play OK on a windows 7 laptop, and Im trying to play them now on the MAC. The picture is OK , but no sound. I have Flip4Mac - no diference

Download and install the free VLC for Mac - that should work:
http://www.videolan.org/vlc/download-macosx.html

Premiere Pro CS5: please help problem with importing a file error output "there was an error decompressing audio or video"

please help problem with importing a file error output "there was an error decompressing audio or video"

this is related to what adobe program/version?

Problem with importing audio

When I import a Quicktime movie into iMovie, the audio doesn't import with it. I've tried going to file--import, and just clicking and dragging the file into my clips. What's wrong? I'm using version 6.0.3. Thanks.

This is from iMovie Help:
*The audio is missing from my imported QuickTime movie*
If audio is missing from your imported QuickTime movie, you may be importing video in MPEG-1 Muxed format or MPEG-2 Muxed format. Only the video portion is imported from movies in these formats.
To see if your imported movie file is in MPEG-1 or MPEG-2 Muxed format:
1. Open the original movie file in QuickTime Player.
2. Choose Window > Show Movie Info.
3. If necessary, click More Info in the Movie Info window to see the movie format.
For further info, go to IMovie Help>Working With Sound>Solving Problems with Audio.
Good luck.

Problem with importing a movie made in Keynote

Hello
I need to import a movie of a slideshow that I made with keynote into iMovie, but when I do so the slideshow movie from keynote is clipped/cropped by the screen in iMovie. How do I fix this?

Burning Keynote presentations in iDVD
http://support.apple.com/kb/HT2936
Contributor Old Toad has added the following excellent advice:
To get the keynote presentation into an iDVD slideshow that you can advance slide by slide with a DVD player remove you need to convert each Keynote slide to a jpg file. To to this go to the view all slide window, select all of the slides and type Command+P to start a print job.
While in the print window click on the PDF button at the bottom and select "Save PDF to iPhoto" from the drop down menu. That will create a 200 dpi jpg file of each slide of the presentation.
Next add those slides to a slideshow in iDVD and select slide duration to Manual. Now the finished DVD is played the DVD player remote will control the advance of the slide.
I suggest you follow this workflow to create the DVD:
Once you have the project as you want it save it as a disk image via the File ➙ Save as Disk Image menu option. This will separate the encoding process from the burn process.
To check the encoding mount the disk image and launch DVD Player and play it. If it plays OK with DVD Player the encoding was good.
Then burn to disk with Disk Utility or Toast at the slowest speed available (2x-4x) to assure the best burn quality. Always use top quality media: Verbatim, Maxell or Taiyo Yuden DVD-R are the most recommended in these forums.
As far as having no menu you must have a menu to fall back into once the presentation has finished. If you want just a black screen use one of the old themes like Brushed Metal, Burlap, Sage or Graphite and put a blank, black image file in as the background. You will have to have a button or text button in the menu so choose text and set the text to black if you want a fully blank menu. Be sure to set the highlight color for the text button to black also.
Finally follow Klaus1's method of dragging the slideshow into the autoplay bin while in the Map mode so the slideshow will start automatically when the disk is inserted into the player.

Problem with importing a AVI file

Hi everyone,
I did a capture to hard drive of a VHS home movie via Turtle Beach PCI card software, saving as .avi file that is roughly 2 hrs long, when I import into Premier Pro CS3, I only see the first 2 minutes. Anyone have a suggestions on what I can do to.
Thanks,
George

George,
I just finished a project, similar to yours and used the same hardware, TB PCI, and their software for the Capture. In my case, I chose AVI uncompressed and every file Imported into Premiere fine. Do you recall which CODEC you selected in the TB software. The only problem with AVI uncompressed is very, very large file sizes and I had 32 VHS tapes, some EP and some LP.
Quite a few folk on this forum have had excellent results with the Canopus products, but I already had the TB, so I did not change.
If G-Spot throws a fit, then you probably have a corrupt file. I assume that G-Spot installed OK, and the errors were with your AVI file. If not, try install again with all AV, Spyware, etc. software turned off. Try to Capture again with AVI uncompressed and see if your result is different.
Hunt

Problems with metadata in .mov files

Hi
I'm trying to set up an archiving system for video much like the one I use for photography. In doing this, I use metadata (File Info) reated and applied in Bridge to create searchable keywords for our archivist to use.
The problem is, I can't get bridge to create the metadata files. I can access the metadata templates function through the tools, File Info, or by control-clicking the image. But the window that opens is not editable, though it is savable. Blank but savable. I also cannot access other, previously created, templates. They are viewable, but greyed.
I don't think i had this issue a couple of weeks ago. Am i doing something wrong?
filmgrrrl

I'm not familiar with movies but tried a .mov file myself. It is not
possible to add metadata or keywords because it gives the message that it is
a read only file.
And it does make sense you can't add data to a read only file
I tried also a little project that I used for try with film function on my
powershot G9 and that was saved in i-Movie as Mv4. This file is capable of
adding metadata so you should search for a way to make the .mov readable
(don't know if it is possible at all), or if you make theme yourself try a
format earlier in the process. But as said, I know very little to none about
movies...
Could this be with the version of Bridge I'm using? It really doesn't seem to
want to give me access to change the metadata on .mov files. it's fine on
photo files of various formats.

Problems with import of static files/images

I have a series of static files (such as jquery/jquery ui libraries) that we have been storing in WORKSPACE_IMAGES. We had hoped to be able to export the static files and use our automated build process to import the files via sqlplus. However, I have run into problems with the files being "corrupted"...either they don't show up at all in firebug, or one file contains parts of another file, rendering it useless. If I delete these files and re-upload them separately through the builder, then I don't have any problems.
I can only assume there is some perhaps special character or some other issue that I'm not aware of either during the export process or the import process.
My first preference would be to store these files on the app server, but unfortunately that's not on the table at the moment.
Any ideas what would be causing the issues here?
Any help would be appreciated.
Thanks in advance
Jeff

Hello all,
This is an old thread, but it's an old problem that I'm concerned may still be continuing.
We're moving from 3.2 to 4.1. While copying our applications from 3.2 to a test 4.1 installation, we did a static file export for "All static files" from 3.2 and did an import to 4.1. We're seeing the same behavior that I and others have reported in the past - any static files that are javascript are corrupted when "all static files" was chosen. Exporting/importing each javascript static file individually appears to work fine.
If the bug was in 3.2 in that it was generating a corrupted export file when "all static files" is chosen, then I'm not concerned - we're moving from 3.2 anyway. But, if the issue is in the import then it must still exist in 4.1 and that would be a concern.
Does anyone know if this was a recognized bug in 3.2 and has since been corrected?
Thanks!
John

Firestore FSC problems with m2t and .mov files

I am having a problem opening files from Firestore FSC. Both m2t and Qt .mov
files will not open for me in FCE,iMovie or Qt with Quicktime MPEG2 reader
installed. Anyone having this problem and is there a solution other than
buying Final Cut Pro?
Charles Dodd

I am able to capture m2t and Quicktime.mov files from my FSC to FCE, but in
real time which defeats one of the reasons I purchased my FSC. Also
StreamClip will open the the m2t files, but not .mov files. I can't open the
the m2t/.mov files in FCE from my desktop or from a folder. Sony Vegas Pro
will open m2t files from a folder or desktop etc. I am very new at this, but
this if what I have accomplished so far. Thanks
Charles Dodd

Premiere cc only importing audio .mov file, please help

My friend sent me an .mov file, he has a mac I have a PC, when I import it to premiere cc, there is only sound. I can see the video on VLC player. I am not very technical. Please help!!! Any suggestions? thank you

MOV is a wrapper, what is inside YOUR wrapper - Exactly what is INSIDE the video you are editing?
Codec & Format information, with 2 links inside for you to read http://forums.adobe.com/thread/1270588
Report back with the codec details of your file, use the programs below... A screen shot works well to SHOW people what you are doing
http://forums.adobe.com/thread/592070?tstart=30 for screen shot instructions
Free programs to get file information for PC/Mac http://mediaarea.net/en/MediaInfo/Download

Big trouble with importing my .MOV files into any editing software.

Hi All
I am new to the forum and i would like to ask you a really big question that has been bugging me for days now.
I have a Cannon 700D and i have CS 4 pro and Cyberlink Powerdirector 12. Both worked fine with any other video file, but when i tried to import a file originating from my cannon 700D camera both of the softwares stated that the files were either corrupted or not supported. The error message also stated that i should call the video provider to ask for an alternative video footage (which is me ). I tried having quick time installed so that it could install various other kinds of CODEC so that it could read and I have also tried switching the camera settings from PAL to NSTC. I would be really glad if anybody could give me an explanation and a detailed explanaiton on how to fix my problem. Thank you very much in advance.
Pepe

Exactly what is INSIDE the video you are editing?
Codec & Format information, with 2 links inside for you to read http://forums.adobe.com/thread/1270588
Report back with the codec details of your file, use the programs below... A screen shot works well to SHOW people what you are doing
https://forums.adobe.com/thread/1070933 for screen shot instructions
Free programs to get file information for PC/Mac http://mediaarea.net/en/MediaInfo/Download

Problems with a QuickTime movie file. Error 2048 message

I am having problems with a QuickTime file.
The file is on a TDK 4GB pen drive.
I can access the file without problem directly from the pen drive.
I am using a Sony VAIO Laptop running Windows 7.
QuickTime version 7.71.80.42.
When I transfer the file to a folder or upload to send via e-mail on Hotmail and then try to open it I receive an Error 2048 message - "Couldn't open the file.......because it is not a file that QuickTime understands.
Any help would be appreciated.

You should be fine: a standard DVD can contain up to 120 minutes of video, but this includes menus etc.
iDVD is not concerned with file sizes, just length. It will automatically compress the iMovie file to the standard DVD format of mpeg2 - which is 4.7GB for 120 minutes!
I have once made a family DVD 115 minutes long, but after the family either protested or fell asleep, I have tried to keep them under 75 minutes!

Problems with Import a excel file?

Folks,
I created a form to upload a excel file, the upload works fine , but I have a problem with the first line of the excel file. I created a model with the column names, the headers. When I uploaded this excel file to a folder inside my CF server, the first line is inserted in my DB, how fix this problem?
Tks
Fabiano Magno Pechibella

You've said you have a problem. You haven't said what the problem is.

Problem with importing a dmp file

Hello,
I am trying to import a dmp file to make an excercise.
I've tried and read manuals all day now, but it seems I still do something wrong
First, In the Enterprise Manager console, I create a new user (CREATE LIKE scott):
<img src="http://users.skynet.be/wouterjans/orcl/oracle03.JPG">
Then I create a new Table: dummy with 2 fields: A en B (varchar2 and size10)
<img src="http://users.skynet.be/wouterjans/orcl/oracle04.JPG">
After that, grant dba to the new user
grant dba to DEMO;Then I Run CMD and go to the c:\oracle\ora92\BIN folder
<img src="http://users.skynet.be/wouterjans/orcl/oracle01.JPG">
I import the dmp file (STAG3536.dmp)
and it says it succeed
<img src="http://users.skynet.be/wouterjans/orcl/oracle02.JPG">
So normally its ok
Then I go to my Form builder and I open a new Form
When I try to run the data wizard now. I only see the "dummy" record I created before but I dont see the database from my imported file.
<img src="http://users.skynet.be/wouterjans/orcl/oracle05.JPG">
Could anyone help me pls ??
Thanks in advance,
Wouter
Message was edited by:
wouter81

dont go in bin directory you can run imp cmd from any where
if you want to import in scott scheme
you do this
connect system/password@dbname
list of contents = n
import grant = y
import table= y
import entire export file = n
user = scott
check to this i hope you will success.
Rgds

CS5.5 Extended - problem with importing audio .mov files

Similar Messages

Maybe you are looking for