CS5.5 Indesign upgrade won't install "update is not applicable" error

Upgraded to Yosemite, reinstalled legit CS5 InDesign successfully, need to download the upgrade to 5.5 for essential "shared content" plug in... the update won't install "update is not applicable" error w no serial code request, just doesn't install. Indesign 5.0 was working fine, i just need a couple extensions

you can update cs5:  http://www.adobe.com/downloads/updates/
but you can't upgrade to cs5.5.
you can upgrade to cs6 or cc (for money).

Similar Messages

  • What to do with "Update is not applicable" error when install the InCopy 7.0.5.562 patch on window?

    Hi,
    I had InCopy 7.0.0.354 window version, and would like to upgrade to newer version.
    After install the InCopy 7.0.5.652 patch, there is this "Update is not applicable" error.
    The InDesign 7.0.5.652 patch installs (my old InDesign is 7.0.0.354) with no problem.
    I also tried to remove my InCopy 7.0.0, re-installed InCopy 7.0.0, but still the 7.0.5 patch has the same error.
    Now I have newer version of InDesign, but old version of InCopy, which can't be right for my work.
    Does anyone know how to fix it?
    I can only use the 7.0.5 patch.
    Thanks.

    Hi,
    I had InCopy 7.0.0.354 window version, and would like to upgrade to newer version.
    After install the InCopy 7.0.5.652 patch, there is this "Update is not applicable" error.
    The InDesign 7.0.5.652 patch installs (my old InDesign is 7.0.0.354) with no problem.
    I also tried to remove my InCopy 7.0.0, re-installed InCopy 7.0.0, but still the 7.0.5 patch has the same error.
    Now I have newer version of InDesign, but old version of InCopy, which can't be right for my work.
    Does anyone know how to fix it?
    I can only use the 7.0.5 patch.
    Thanks.

  • InDesign CS6 won't install/update Adobe Exchange panel

    After installing and updating exchange manager 6.0.2.40 when I go to indesign exchange panel it says update is available, click that, it downloads and says update successful, restart indesign to take effect. When it installs it switches to extension manager and says update conflicts with other version install yes or no? Click yes, says succesfull and restart indesign, I restart indesign and same thing happens again and again.
    Photoshop and illustrator (CS6) panels work just fine. It's indesign that doesnt work.
    Mac OS 10.7
    Tried updating, reinstalling exchange manager, adobe application manager is 6.2.112.0,
    tried several times on indesign and it just keeps going through the same update/restart loop.

    Hi SpooCobraVenom,
    You can try to uninstall "exchange panel", and download and install it again from https://www.adobeexchange.com/api/AdobeExchange.zxp.

  • PSE 9 update is not applicable; error loading

    Hi I am struggling with this after several attempts.
    Have PSE9.
    Apparently it was shipped with camera raw 6.1 but I can't see it.
    Tried downloading 6.3 and followed the instructions eg: unzip, launch Patchinstaller.
    But I get update not applicable window or erroe loading updates.
    What am I missing?
    Hopefully something simple - like me!
    Be grateful for help thanks.
    ot

    After a few more tries I decided to uninstall/reinstall and that has has sorted the problem.
    Two updates were availble - pse9 and cam raw - both have now been successfully installed and are working.
    Strange things - computers.
    Thank you.

  • CS5.5 upgrade won't install on window vista studio?

    I bought a cs5.5 design standard upgrade for my cs3 design standard. I bought it and download what i need to install it. When I go try to install it tells me its missing a file and not enough memory to do it and need to make room. I have enough room for this software and i download everything. I'm getting very fustrated with it. What is the problem, what do i need to do and how can i get this problem fix?

    Can you please provide the exact error message or perhaps a screenshot of the error?

  • Trying to download the In Design CS5 patch 7_5_3 patch-all, but I get error message "Some updates failed to install, update is not applicable." CS5 is the only version of the Creative Suite that I have on my MacBook.

    How can I get it to download the patch?

    Terminate the process in task manager or turn off Minibridge in the PS prefs and restart your system.
    Mylenium

  • RSAT Tools won't install (the update is not applicable to your computer) in build 9926

    Trying to install Remote Server Administration Tools in Windows 10 Technical Preview build 9926
    Downloaded WindowsTH-KB2693643-x64.msu
    Gives error "the update is not applicable to your computer"

    Hi SeanSauve,
    The below is the information I quoted from the system requirements part on the download page:
    Supported Operating System
                        Windows 10 , Windows 10 Tech Preview , Windows 8.1                
    **Remote Server Administration Tools for Windows 10 Technical Preview can be installed ONLY on computers that are running the second release of Windows 10 Technical Preview.** Remote Server Administration Tools cannot be installed on Windows
    RT, computers with an Advanced RISC Machine (ARM) architecture, or other system-on-chip devices.
    Remote Server Administration Tools for Windows 10 Technical Preview runs on both x86- and x64-based editions of builds 9926 and later releases of Windows 10 Technical Preview, including all updates.  This release does not run on Windows 10 Technical
    Preview builds that are older than 9926. Download and install the version that matches the architecture of the computer on which you plan to install the administration tools. If you are not sure whether your computer is x86- or x64-based, see
    How to determine whether a computer is running a 32-bit version or 64-bit version of the Windows operating system.
    Remote Server Administration Tools for Windows 10 Technical Preview is available only in United States English (en-US) for this release.
    IMPORTANT: Remove all older versions of Administration Tools Pack or Remote Server Administration Tools—including older prerelease versions, and releases of the tools for different languages or locales—from the computer before you install Remote
    Server Administration Tools for Windows 10 Technical Preview. Only one copy at a time of Remote Server Administration Tools can be installed on a computer. If you have upgraded to Windows 10 Technical Preview from an older release of Windows, you will need
    to install Remote Server Administration Tools for Windows 10 Technical Preview on the computer; no earlier releases of Remote Server Administration Tools are still installed on a computer that you have upgraded to Windows 10 Technical Preview.
    Remote Server Administration Tools for Windows 10 Technical Preview includes support for remote management of computers that are running the Server Core installation option or the Minimal Server Graphical Interface configuration of Windows Server Technical
    Preview. However, Remote Server Administration Tools for Windows 10 Technical Preview cannot be installed on any releases or installation options of the Windows Server operating system.
    Earlier releases of Remote Server Administration Tools (such as those for Windows 8.1) are not available--nor do they run--on Windows 10 Technical Preview.
    Server Manager is included with Remote Server Administration Tools for Windows 10 Technical Preview; GUI-based tools that are part of this release of Remote Server Administration Tools can be opened by using commands on the Tools menu of the Server Manager
    console. To use Server Manager to access and manage remote servers that are running Windows Server 2008, Windows Server 2008 R2, Windows Server 2012, or Windows Server 2012 R2, you must install several updates on the older operating systems. For more information
    about requirements for using Server Manager to manage remote servers, see
    Manage multiple, remote servers with Server Manager.
    More information, see:
    Remote Server Administration Tools for Windows 10 Technical Preview (January 2015)
    Please check and see if your current build is Windows 10 build 9926, and the system language, RSAT should not be able to install on the other language versions of Windows 10 other than EN-US.
    Best regards
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected].

  • Macbook air won't install updates

    I am sure this has been covered before ... but help! My Macbook Air (purchased Jume 2012, UK) won't install updates. It downloads them, and then when it tries to install it says that an unexpected error occured. I have checked Disk Utility, and its says that Macintosh HD sppears to be OK. Any words of wisdom, folks?
    Thanks in advance.

    I am sure this has been covered before ... but help! My Macbook Air (purchased Jume 2012, UK) won't install updates. It downloads them, and then when it tries to install it says that an unexpected error occured. I have checked Disk Utility, and its says that Macintosh HD sppears to be OK. Any words of wisdom, folks?
    Thanks in advance.

  • CS5 extended upgrade doesn't install over CS5

    Trying to install a purchased CS5 extended upgrade over an installed CS5: DVD loads, and says "CS5 already installed".  I notice that the icon on
    the disk doesn't call itself "extended" -- it is as though the disk, though labelled correctly on the box, doesn't actually contain the extended version.
    I've tried the "chat" method of help from Adobe -- which is frustrating in many ways -- and they at least claimed that the serial number was correct.  If I
    continue the installation, it will, in about a minute, put in a few things, including an older version of ACR, but Photoshop itself is unchanged, and certainly
    not the extended version. 
    Anyone who has done this successfully, did the icon on the installer call itself "CS5 extended"?
    The "chat" helper tried to establish an "adobe connect" session, without success.  I'm very afraid to uninstall my CS5, on which I
    depend! -- because then the upgrade installer may say " no product to upgrade!"    Short of another solution, I guess I am
    out my 384 dollars.
    Don't know what to do next!

    Steve --
    The chat, though it came up quickly enough, was frustrating in that
    a. It was hard to make them understand the problem
    b. Every time I went to do something they suggested, the chat was
    lost and I had to start all over again (that's why it was "they").
    Finally, I realized that I could tell them the case # so they could
    get up to speed.  But they continued to ask the same questions over
    again. We never got to any possible solution.
    c. The real issue is that I didn't understand that "extended" was the
    same program, so I don't think my problem made sense to them.
    I did (with some trepidation) deactivate, and the reactivation worked
    fine.  If I had downloaded the upgrade from Adobe, I think the situation
    would have been clear, but because I bought a boxed DVD, I assumed that
    it was a "different" program, as it was when I upgraded my wife's CS4 to
    CS5.
    Anyway, I'm all set now, and thanks again for your assistance and
    suggestions.

  • Imac won't install updates on restart

    hello..
    my imac won't install update automatically when needs restart.so i install them manually from apple download..why?
    Message was edited by: panos_ip

    during restart installer window shows up but then mac restart immediately

  • 5.0.4 Upgrade won't install

    I have a Power Mac G5, with a 2 GKz PowerPC 970 CPU with plenty of space on the hard drive (over 80 GB). I have Final Cut 5.0.1 from Final Cut Studio, and I am trying to upgrade to 5.0.4. I downloaded the upgrade, but when I ran it, it said it could not install the upgrade on my computer. In the system profile, the application is listed as "Final Cut Pro HD" 5.0.1. Is that why the upgrade won't install?
    I believe I originally upgraded to Final Cut Pro Studio from Final Cut Pro HD.
    Many thank for any thoughts.

    I imagine the Serial Number I entered was valid, because the website had to accept it in order to let me download the upgrade in the first place.
    Ugg. I was hoping to avoid reinstalling. I just went through that with the hinky Quicktime 7.0.4 upgrade that scambled my operating system. I had to go back and reinstall that, which of course, forced me to reinstall all of Final Cut Studio.
    But thanks for the suggestion. Any others that don't involve reinstalling 2 versions of Final Cut (hope, hope)?

  • Adobe Media Encoder CS5 5.0.1 Update is not applicable

    while running the update manager, i got the message:
    the following updates were unable to install. If you wish to install this updates, please fix the problems below and retry:
    Adobe Media Encoder CS5 5.0.1
    Update is not applicable
    anybody else received this?
    Any idea what or how  to fix?
    tnx

    I am also having the same issue.
    Everytime this update is coming and im unable to update it...

  • Update is not applicable while installing Camera Raw

    Hello internet.
    I just bought a new camera, Nikon D3100.
    I shoot with RAW files, and therefore I need to open them in PS CS5.
    To do this, I need the newest update of Camera Raw, the Camera Raw 6.3.
    When I try to update it, my Adobe Application Manager says "Some updates failed to install. Update is not applicable".
    I've tried to uninstall PS, and it's also updated to the newest version.
    Regards,
    Holten

    Hi BornToDrink,
    Thanks for
    sharing your solution in the forum. This will help others who face the same scenario resolve the issue quickly. Your time and efforts are highly appreciated.
    Best regards,
    Justin Gu

  • AE 10.0.1 Install Fails, 'Update is not applicable'

    I've been trying to update to the new version of After Effects 10.0.1 but the install fails and I get the error message "Update is not applicable."
    I need this update because I've run into the AIFF rendering bug where an AIFF audio track will not render out properly. This issue is supposedly fixed in 10.0.1. I've got a deadline looming so any help would be appreciated.
    I'm working on a Mac Pro with Mac OS 10.5.8 if that helps.

    This usually occurs when the installer fails to find a file on disk that it's looking for to see which version of the software is already there. Unfortunately, the most reliable way to deal with this is to uninstall the entire Creative Suite 5 package, run the CS5 cleaner script (http://www.adobe.com/support/contact/cs5clean.html), and then reinstall. Then apply the update.
    I know that that's not welcome news, but it's the best that I have right now.
    Please report back regarding whether this works for you. If it doesn't, we'll help you to troubleshoot.

  • The Update is Not Applicable To Your Computer when installing patch on Windows Server 2008 R2 machine

    When I try to install security patch KB2525694 and KB978542 on my Windows Server 2008 R2 machine, I get the message "The Update is Not Applicable To Your Computer".  I am using the following files:
    Windows6.1-KB978542-x64 (KB978542)
    Windows6.1-KB2525694-x64 (KB2525694)
    I believe these are the correct files but no luck installing it.  Any help would be greatly appreciated!

    When I try to install security patch KB2525694 on my Windows Server 2008 R2 machine, I get the message "The Update is Not Applicable To Your Computer".  I am using the following files:
    Windows6.1-KB2525694-x64 (KB2525694)
    This update has been superseded many times.
    If you already have installed one of the superseding updates below, KB2525694 will not be applicable.
    For the list of superseding updates, check this list:
    http://catalog.update.microsoft.com/v7/site/Search.aspx?q=2525694%20r2%20x64
    (click on the result, then click on the "Package Details" tab to get the list below..
    This update has been replaced by the following updates:
    Security Update for Windows Server 2008 R2 x64 Edition (KB2555917)
    Security Update for Windows Server 2008 R2 x64 Edition (KB2567053)
    Security Update for Windows Server 2008 R2 x64 Edition (KB2639417)
    Security Update for Windows Server 2008 R2 x64 Edition (KB2641653)
    Security Update for Windows Server 2008 R2 x64 Edition (KB2660465)
    Security Update for Windows Server 2008 R2 x64 Edition (KB2676562)
    Security Update for Windows Server 2008 R2 x64 Edition (KB2709162)
    Security Update for Windows Server 2008 R2 x64 Edition (KB2718523)
    Security Update for Windows Server 2008 R2 x64 Edition (KB2731847)
    Security Update for Windows Server 2008 R2 x64 Edition (KB2761226)
    Security Update for Windows Server 2008 R2 x64 Edition (KB2778344)
    Security Update for Windows Server 2008 R2 x64 Edition (KB2778930)
    Security Update for Windows Server 2008 R2 x64 Edition (KB2779030)
    Security Update for Windows Server 2008 R2 x64 Edition (KB2808735)
    Security Update for Windows Server 2008 R2 x64 Edition (KB2829361)
    Security Update for Windows Server 2008 R2 x64 Edition (KB2850851)
    Security Update for Windows Server 2008 R2 x64 Edition (KB2876315)
    Security Update for Windows Server 2008 R2 x64 Edition (KB2883150)
    Security Update for Windows Server 2008 R2 x64 Edition (KB2893984)
    Security Update for Windows Server 2008 R2 x64 Edition (KB2913602)
    Security Update for Windows Server 2008 R2 x64 Edition (KB2930275)
    Security Update for Windows Server 2008 R2 x64 Edition (KB2973201)
    Don
    (Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
    This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!)

Maybe you are looking for

  • How to setup a dynamic jump menu field

    I attempted to setup a normal drop down with a button to excute the values, but that doesnt seem to work very well... even though the database has the correct links within the tables, regardless of what selection you make you are taken to the same pa

  • Playing DVD problems

    Hi all, Have built a DVD with a first play track, which goes to a menu with two simple buttons. Button 1, the default button goes to the main film, button 2, to the "extras". I tested the DVD once burned and all seemed fine. Then as I stopped it, I j

  • Component Configuration

    Hi, I'm using function module <b>CUCB_GET_CONFIGURATION</b> with CUOBJ number from VBAP table to obain components configuration. As a result I got a Finished Material with its components. Is there any way of knowing if a component from an Order BOM h

  • Installation old version Photoshop Elements 4.0 Windows 7, IE 4.0 required, what if you have IE 11.0

    I have an old Version of Photoshop Elements 4.0 on CD and used it long time on Win XP, now i use Win 7.1 and need a new installation. Worked till i was asked after Internetexplorer 4.0 was required, and i have IE 11.0 - that is higher - and the Insta

  • Deleted contacts - can i get them back?

    I deleted some contacts and they were deleted from another device that is synced with the same icloud account - how do i get them back, are they saved in icloud and how do i access them?