CS5.5 on Lion has no Digital Cinema Preview. PLEASE HELP!

I am running CS5.5 on Lion and there is no Digital Cinema Preview. Is this a know issue on Lion, as it appears fine on Snow Leopard and older OS? I desperatley need to view my composition full screen on an external projector (I'm doing projection mapping) and I'm completly stuck.
Please help.

More likely an issue directly attribiutable to Lion. Dunno. Sorry. Quick search turned up only one other inquiry but there may be others:
http://forums.adobe.com/message/4086382#4086382
Suggest you drop by the Lion and Quicktime discussions at apple.com and search carefully for the term dgitial desktop preview or desktop cinema. Traffic over there is heavy and the signla to noise ration is heavy on the noise.

Similar Messages

IMac Intel FCP and digital cinema preview

i've just recently upgraded from a g4 powerbook to an intel iMac 20" and curently running 10.4.7 and FCP 5.01. On the powerbook i was running FCP 4.5 and using a TV monitor as a 2nd monitor via the digital cinema preview. Yesterday i bought the mini-dvi to video adapter and plugged in the TV and am unable to get a preview through the TV. I get the extended desktop and even Shake recognises it as a monitor. Im thinking maybe its a Universal thing, my crossgrade arrives next week, or more disturbing perhaps the video card which is the NVIDIA GeForce 7600 GT which i cant see on the FCP recomended page??
anyone have any ideas??
thanks in advace
mao
imac intel 24" Mac OS X (10.4.7)

hey everyone who is interested, finally discovered after some research that FCP digital cinema PREVIEW is ONLY supported in AGP cards (such as that exist in powerbooks etc) and does not support the PCI range. So i guess it is means running it through the camera or a canopus type bridge (sound of cash disappearing) thanks mac! You had a great, simple and elegant solution then just threw it away.

I lost my ability to view PDFs with update and Lion install. Says "plugin missing", please help?!?!

I lost my ability to view PDFs with update and Lion install. Says "plugin missing", please help?!?!
I am trying to finish up a paper for my masters and now I am stuck because the library website won't work without PDF

Adobe has a knowledgebase article on this.
http://kb2.adobe.com/cps/905/cpsid_90508.html
Acrobat family
Adobe Reader plug-in and Acrobat plug-in are not compatible with the Safari 5.1 browser, which will ship with Mac OS X 10.7 and for 10.6 in July 2011. Adobe Reader and Acrobat will continue to work as standalone applications on Mac OS X 10.7 and 10.6, and will render PDF documents outside of the browser. In addition, Safari 5.1 renders PDF documents natively. However, the Adobe Reader and Acrobat plug-ins will not function as expected in LiveCycle and Acrobat workflows that require either plug-in to render PDF documents in Safari 5.1.
Recommendation to Customers/Users:
For Acrobat customers who utilize functionality like forms, digital signatures, portfolios, guides, 3D, extended PDFs and rights management, and who require the Acrobat plug-in to render PDF documents in the Safari browser, Adobe recommends that you continue to use Safari 5.0.x and Mac OS X 10.6. We will provide updates as we continue to investigate this issue.

I have problem in quicklook for mp4 files in my mountain lion os 10.8.2 so please help me what i need to do? but i can view mov,3gp,jpeg files problem is only with mp4 files.... any one help me...

I have problem in quicklook for mp4 files in my mountain lion os 10.8.2 so please help me what i need to do? but i can view mov,3gp,jpeg files problem is only with mp4 files.... any one help me...

I have problem in quicklook for mp4 files in my mountain lion os 10.8.2 so please help me what i need to do? but i can view mov,3gp,jpeg files problem is only with mp4 files.... any one help me...

I type in the code on the iTunes gift card but it says it has not been activated? Please help me.

I type in the code on the iTunes gift card but it says it has not been activate? Please help.

If the store that you bought it from is nearby then you could try going back to it and ask them to activate it properly. If it isn't, or if they can't/won't help, then try contacting iTunes Support (you will probably need to give them images of the front and back of the card, and possibly its receipt) : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then iTunes Cards And Codes

Hello, okay? since then, was robbed today, and my find my iphone this down, please tell me if he has a way to locate the computer, I need the iphone again, it has many important data it please help me

hello, okay? since then, was robbed today, and my find my
iphone this down, please tell me if he has a way to locate the computer, I need the iphone again, it has many important data it please help me

It's gone and you most likely are not getting it back.
If you had important info on it, you should have made backups so you would not lose the data.

I brought a iTunes card and the the code on the back is not there it has faded away can u please help me with this problem

i brought a iTunes card and the the code on the back is not there it has faded away can u please help me with this problem

Hi Daniel ...
Try here > iTunes Store: Invalid, inactive, or illegible codes

HT4623 i disconnected my iphone 4 while it was updating and now its frozen, the screen is showing a apple logo and a loading bar which has been for 9hrs now. please help

i disconnected my iphone 4 while it was updating and now its frozen, the screen is showing a apple logo and a loading bar which has been for 9hrs now. please help

It's not uncommon for it to not work the first time and sometimes, you have to try it a few times. Turn off your antivirus software and your firewall while you are trying to restore the iPad. Enable them again after you restore.
If that still won't work, post back with detailed information as to what exactly does happen as you go through the process.

I made some amendments to my colour settings in PS CS5 and now everything prints black and white. Please help me to reset all the settings to default

I made some amendments to my colour settings in PS CS5 and now everything prints black and white. Please help me to reset all the settings to default. This was after I tried to implement the steps set out in Real World Photoshop CS5. I stuggele to match the colours of my two screens, the one a laptop and the other a LCD and the printer, even after calibration with Spyder 3. Really lost at present.

Tap Settings / Wi-Fi. Tap the blue circle with an arrow to the right of your network then tap: Forget This Network.
Restart the iPad. Tap Settings / Wi-Fi. Tap the network name again then type in your password.
If that didn't help, try here > Apple - Support - iPad - Wi-Fi Assistant
And try turning off your router for 5 minutes, then turn it back on. Try typing in the password again.

PC crashed. CD-Rom not working. Downloaded CS5 Web Premium but not able to install. Please Help. Help.

PC crashed. CD-Rom not working. Downloaded CS5 Web Premium but not able to install. Please Help. Help.

I had problem with my CD-rom, it not able to open. On top of that recently my PC crashed.
I managed to install other software, but not able to install CS5 Web Premium.
Ive downloaded the electronic version via Adobe Downloads, but not able install it.

I upgrades my mac operating system to OSX 10.9.4 and now my Dreamweaver CS5 won't work, it just quits unexpectedly. please help.

I upgrades my mac operating system to OSX 10.9.4 and now my Dreamweaver CS5 won't work, it just quits unexpectedly. Please help.

Remove preferences on Mac OS
Quit Dreamweaver.
In the Finder, navigate to /Users/Your User Name/Library/Application Support/Adobe.
Rename the Dreamweaver preferences folder:
Dreamweaver CS5: Rename the Dreamweaver CS5 folder to, for example, Old Dreamweaver CS5.
Navigate to /Users/Your User Name/Library/Preferences.
Rename the Dreamweaver preferences file:
Dreamweaver CS5: Rename the Adobe Dreamweaver CS5 Prefs file to, for example, Old Adobe Dreamweaver CS5 Prefs.
Try to re-create problem
After you have removed your existing preferences, restart Dreamweaver. The application creates new preferences files, folders, and registry entries, as applicable, using the default settings.
Then try to re-create the problem that you had before.
If the problem was resolved, then damaged preferences was the cause.
If the problem persists, then the preferences are not the cause and you can replace the original preferences.
To replace the original preferences:
Quit dreamweaver.
Delete the new preferences folder and restore the original name of the previous folder.

How to access the activities created by an enduser especially when the enduser has left the organization?Please help me out with the possible solution

How to access the activities created by an end user especially when the end user has left the organization?Please help me out with the possible solution

Hi Ramesh,
In the web UI we have business role IC_manger where you can search the activities based on employee responsible and you can use business transaction assignment functionality to assign those activities to any other end user or team.
Else you can also use Agent inbox functionality if you have configure the agent inbox for those activity.
Hope this helps solving your query

On start up i just get a grey screen with the apple logo-this has suddenly started happenin. Please help?

on start up i just get a grey screen with the apple logo-this has suddenly started happenin. Please help?

Take each of these steps that you haven't already tried. Stop when the problem is resolved.
To restart an unresponsive computer, press and hold the power button for a few seconds until the power shuts off, then release, wait a few more seconds, and press it again briefly.
Step 1
The first step in dealing with a startup failure is to secure the data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since the last backup, you can skip this step.
There are several ways to back up a Mac that is unable to start. You need an external hard drive to hold the backup data.
a. Start up from the Recovery partition, or from a local Time Machine backup volume (option key at startup.) When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.” The article refers to starting up from a DVD, but the procedure in Recovery mode is the same. You don't need a DVD if you're running OS X 10.7 or later.
b. If Step 1a fails because of disk errors, and no other Mac is available, then you may be able to salvage some of your files by copying them in the Finder. If you already have an external drive with OS X installed, start up from it. Otherwise, if you have Internet access, follow the instructions on this page to prepare the external drive and install OS X on it. You'll use the Recovery installer, rather than downloading it from the App Store.
c. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, start the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
d. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
Step 2
If the startup process stops at a blank gray screen with no Apple logo or spinning "daisy wheel," then the startup volume may be full. If you had previously seen warnings of low disk space, this is almost certainly the case. You might be able to start up in safe mode even though you can't start up normally. Otherwise, start up from an external drive, or else use the technique in Step 1b, 1c, or 1d to mount the internal drive and delete some files. According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation.
Step 3
Sometimes a startup failure can be resolved by resetting the NVRAM.
Step 4
If a desktop Mac hangs at a plain gray screen with a movable cursor, the keyboard may not be recognized. Press and hold the button on the side of an Apple wireless keyboard to make it discoverable. If need be, replace or recharge the batteries. If you're using a USB keyboard connected to a hub, connect it to a built-in port.
Step 5
If there's a built-in optical drive, a disc may be stuck in it. Follow these instructions to eject it.
Step 6
Press and hold the power button until the power shuts off. Disconnect all wired peripherals except those needed to start up, and remove all aftermarket expansion cards. Use a different keyboard and/or mouse, if those devices are wired. If you can start up now, one of the devices you disconnected, or a combination of them, is causing the problem. Finding out which one is a process of elimination.
Step 7
If you've started from an external storage device, make sure that the internal startup volume is selected in the Startup Disk pane of System Preferences.
Start up in safe mode. Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Post for further instructions.
Safe mode is much slower to start and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know the login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
When you start up in safe mode, it's normal to see a dark gray progress bar on a light gray background. If the progress bar gets stuck for more than a few minutes, or if the system shuts down automatically while the progress bar is displayed, the startup volume is corrupt and the drive is probably malfunctioning. In that case, go to Step 11. If you ever have another problem with the drive, replace it immediately.
If you can start and log in in safe mode, empty the Trash, and then open the Finder Info window on the startup volume ("Macintosh HD," unless you gave it a different name.) Check that you have at least 9 GB of available space, as shown in the window. If you don't, copy as many files as necessary to another volume (not another folder on the same volume) and delete the originals. Deletion isn't complete until you empty the Trash again. Do this until the available space is more than 9 GB. Then restart as usual (i.e., not in safe mode.)
If the startup process hangs again, the problem is likely caused by a third-party system modification that you installed. Post for further instructions.
Step 8
Launch Disk Utility in Recovery mode (see Step 1.) Select the startup volume, then run Repair Disk. If any problems are found, repeat until clear. If Disk Utility reports that the volume can't be repaired, the drive has malfunctioned and should be replaced. You might choose to tolerate one such malfunction in the life of the drive. In that case, erase the volume and restore from a backup. If the same thing ever happens again, replace the drive immediately.
This is one of the rare situations in which you should also run Repair Permissions, ignoring the false warnings it may produce. Look for the line "Permissions repair complete" at the end of the output. Then restart as usual.
Step 9
If the startup device is an aftermarket SSD, it may need a firmware update and/or a forced "garbage collection." Instructions for doing this with a Crucial-branded SSD were posted here. Some of those instructions may apply to other brands of SSD, but you should check with the vendor's tech support.
Step 10
Reinstall the OS. If the Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
Step 11
Do as in Step 9, but this time erase the startup volume in Disk Utility before installing. The system should automatically restart into the Setup Assistant. Follow the prompts to transfer the data from a Time Machine or other backup.
Step 12
This step applies only to models that have a logic-board ("PRAM") battery: all Mac Pro's and some others (not current models.) Both desktop and portable Macs used to have such a battery. The logic-board battery, if there is one, is separate from the main battery of a portable. A dead logic-board battery can cause a startup failure. Typically the failure will be preceded by loss of the settings for the startup disk and system clock. See the user manual for replacement instructions. You may have to take the machine to a service provider to have the battery replaced.
Step 13
If you get this far, you're probably dealing with a hardware fault. Make a "Genius" appointment at an Apple Store, or go to another authorized service provider.

I am not able to download apps on my iPod touch. They keep saying that my ID has to be reviewed! PLease help me out!!

I am not able to download apps on my iPod touch. They keep saying that my ID has to be reviewed! PLease help me out!! I've been trying since an hour and i have typed my password in about a million times! What can I do?

On a computer or the iPod log into your ID and review/verify all the information and log out.

My iphone 5 32 gb has an camera autofocus problem, please help me solve this

my iphone 5 32 gb has an camera autofocus problem, please help me solve this

Hi teejayfs,
Thanks for visiting Apple Support Communities.
If you've noticed unexpected behavior with your iPhone camera, start with these steps to isolate or resolve the issue:
Camera isn't functioning or has undesired image quality
If the screen shows a closed lens or black image, force quit the Camera app.
If you do not see the Camera app on the Home screen, try searching for it in Spotlight. If the camera does not show up in the search, check to make sure that Restrictions are not turned on by tappingSettings > General > Restrictions.
Ensure the camera lens is clean and free from any obstructions. Use a microfiber polishing cloth to clean the lens.
Cases can interfere with the camera and the flash. Try gently cleaning the lens with a clean dry cloth or removing the case if you see image or color-quality issues with photos.
Try turning iPhone off and then back on.
Tap to focus the camera on the subject. The image may pulse or briefly go in and out of focus as it adjusts.
Try to remain steady while focusing:
Still images: Remain steady while taking the picture. If you move too far in any direction, the camera automatically refocuses to the center.
Note: If you take a picture with iPhone turned sideways, it is automatically saved in landscape orientation.
Video: Adjust focus before you begin recording. You can also tap to readjust focus while recording. Exiting the Camera application while recording will stop recording and will save the video to the Camera Roll.
Note: Video-recording features are not available on original iPhone or iPhone 3G.
If your iPhone has a front and rear camera, try switching between them to verify if the issue persists on both.
You can find these steps here:
iPhone: Hardware troubleshooting
http://support.apple.com/kb/TS2802
Regards,
Jeremy

CS5.5 on Lion has no Digital Cinema Preview. PLEASE HELP!

Similar Messages

Maybe you are looking for