CS5.5 - Only imports audio portion of video

Not matter what I do or what I try CS5.5 imports the audio portion of the file. I'm stumped.

>the file
What KIND of file?
Read Bill Hunt on a file type as WRAPPER http://forums.adobe.com/thread/440037?tstart=0
What is a CODEC... a Primer http://forums.adobe.com/thread/546811?tstart=0
What CODEC is INSIDE that file? http://forums.adobe.com/thread/440037?tstart=0
Report back with the codec details of your file, use the programs below
For PC http://www.headbands.com/gspot/ or http://mediainfo.sourceforge.net/en
For Mac http://mediainfo.massanti.com/
Once you know exactly what it is you are editing, report back with that information... and your project setting, and if there is a red line
above the video in the timeline, which indicates a mismatch between video and project

Similar Messages

Elements11 QUE: Why does only the audio-portion transfer to timeline when I drag a video file down.

Elements11 - 1st time user
When I drag a known good video file from the "My Videos" Folder on my laptops disk down to the "Drag Here" box in my project Timeline, only the audio portion transfers NOT the video.
I am trying to create an "Instant Movie" after watching a youtube video on the subject.
The end goal is to combine portions of three video clips into one for my sons school project.
Any help is greatly appreciated.

Elements11DRC
What version of Premiere Elements are you working with and on what computer operating system is it running?
Can we assume by your selected ID, that the program is Premiere Elements 11?
Pending further details, I will assume that you are working with Premiere Elements 11 on Windows 7, 8, or 8.1 64 bit.
Where is this "My Videos" Folder - on a DVD disc being used as a DataDisc for video storage purposes?
If so, Add Media/DVD Camera or Computer Drive/Video Importer and from there automatically into the project in Project Assets as well as on the Timeline.
If your "My Videos" Folder is a folder on the computer hard drive, then Add Media/Files and Folders to get the video into Project Assets from where you drag the video to the Timeline.
Now for the video that you are trying to import...what are its properties
Video Compression
Audio Compression
Frame Size
Frame Rate
Interlaced or Progressive
File Extension
Pixel Aspect Ratio
Probably answered the easiest by knowing the brand/model/settings of the camera that recorded the video.
Prime interest, that video compression. It could be MotionJPEG which can be problematic for Premiere Elements. It could be AVCHD.avi which cannot be imported.
We can go into greater detail on your project details once we rule in or out any of the factors mentioned above.
By the way, what is the destination for this project....burn to disc DVD or Blu-ray...export to file saved to the computer hard drive...other?
More later.
Thanks.
ATR

Airplay only streaming audio portion from iTunes music videos

ip5, ipad2 & 3 all current f/w & Apple TV2 :
Just all working correctly a little over a month or so ago. Now, can only get audio portion from music videos when Itunes Match is turned ON. Downloading music videos to local device & turning off Match on said device allows for proper a/v playback. Other: going into itunes/purchases and clicking on any purchased video will properly play to ATV2. Videos played via safari, youtube, other apps, also play just fine.
I've rest all devices, including router, nothing. Also restored AV2 & ipad3 just to make sure that the most recent firmware update to all devices was not the cause; result still the same. Friend attempted to play a music video they had on their iphone4/ipad2 and they too couldn't play a purchased iTunes Music Video properly.
Airplay is turned on on all devices.
Do people think this is a bug in the backend of Match or other? any help would be great, thank you.

What you want to do is, unfortunately, not possible. If you want to listen to just the audio for those songs you'll have to buy the audio tracks.
Regards,
Michael

Premire only import audio in a .mov file, how can i get the video?

premire only import audio in a .mov file, how can i get the video?

Wild Guess:
If that is not the solution:
FAQ: What information should I provide when ask... | Adobe Community

Downloaded a movie (mpeg-4) from youtube and I only have audio and no video. it plays on another pc but not this one. please help.

Hi,
I downloaded the latest free version of quicktime. I am trying to play a movie (mpeg-4) that was downloaded from youtube. It plays fine on my other pc, but I only get audio and no video when I open it on this pc. It shows up like static lines on a tv that has bad reception. Can anyone offer some suggestions please? I need to play it on thislaptop computer as I require it for a school presentation. Thank you.

It plays fine on my other pc, but I only get audio and no video when I open it on this pc. It shows up like static lines on a tv that has bad reception.
Open your QuickTime control panel (either via the Control panels, or by going "Edit > Preferences > QuickTime Preferences" in the Quicktime Player). In the Advanced tab, uncheck Enable Direct3D video acceleration:
... and click OK. Quit and restart the QuickTime Player prior to checking to see if the settings change has had any effect.

Changed TV out to off but ipod still only plays audio and no video

Just recently my ipod decided not to play video. All the videos in the video folders are gone and now appear in the music folder. Even the video podcasts no longer appear in the video podcast folder. I have changed the TV to out to off and still it continues to do the same thing. I am not sure what happened, I don't believe I changed any settings or anything. I would hate to reset the ipod and lose everything. Need help, thanks.
Compaq Presario 1500 Windows XP 2 ghz 256 mb ram laptop

It plays fine on my other pc, but I only get audio and no video when I open it on this pc. It shows up like static lines on a tv that has bad reception.
Open your QuickTime control panel (either via the Control panels, or by going "Edit > Preferences > QuickTime Preferences" in the Quicktime Player). In the Advanced tab, uncheck Enable Direct3D video acceleration:
... and click OK. Quit and restart the QuickTime Player prior to checking to see if the settings change has had any effect.

I am using FC Express HD, and for some reason, when I export a Quicktime movie, the final movie will only play audio, and the video is black. I only get the actual video if I export as self contained, or if I exportusing quicktime conversion. Why?

I am using FC Express HD, and for some reason, when I export a Quicktime movie, the final movie will only play audio, and the video is black. I only get the actual video if I export as self contained, or if I exportusing quicktime conversion. Why?

I am using FC Express HD, and for some reason, when I export a Quicktime movie, the final movie will only play audio, and the video is black. I only get the actual video if I export as self contained, or if I exportusing quicktime conversion. Why?

When i try to import a .mov file, it only imports audio

when i try to import a .mov file, it only imports audio - what cani do to fix? windows media player plays it fine

Codec & Format information, with 2 links inside to read
-read both links in reply #1 http://forums.adobe.com/thread/1270588
Report back with the codec details of your file, use the programs below... A screen shot works well to SHOW people what you are doing
http://forums.adobe.com/thread/592070?tstart=30
For PC http://mediainfo.sourceforge.net/en or http://www.headbands.com/gspot/
The Help-and-Tutorials page http://forums.adobe.com/thread/1275830 may help

IMac only mirroring audio but no video

iMac only mirroring audio but no video, and I get no Airplay button in the bar.
I can also not select Apple TV in the System Preferences.
Anybody?

I have read of others having had this button dissapear. Apparently if you totally shut the pad down and reboot it will then reappear.
Hope that helps

Import files has only imported audio, not video

I used FCP7 to capture some footage from DV PAL.
I then went to FCPX, chose "Import Files" and selected the 2 clips I had captured. I chose to copy into the FCPX events library. FCPX only imported the audio, and not the video.
This is the movie info:
DV, 720 x 576 (768 x 576), Millions
16-bit Integer (Little Endian), Mono, 48.000 kHz
16-bit Integer (Little Endian), Mono, 48.000 kHz
Is this a bug?

Hi Charlottehjc,
Welcome to Adobe Forums.
Is it happening with a specific .mov file or with all the .mov files.
Right click on the video and choose new sequence from clip, then check if the issue persists.
Also please mention are you using Windows or Mac and the version of Premiere Pro.
Thanks

Only imports audio, no video when using DSLR .mov files

I just upgraded to CS6 on my Mac Lion. I created a project using the DSLR settings and tried to import a .mov video clip taken from my Canon 5D camera. Strange thing is it only imported the audio and not the video. I tried many of clips and just audio.
As tests, I tried importing a .mpeg clip from an HDV camcorder and it worked fine. I also changed the extension of the DSLR clip to .mpeg and it still didn't work. The DSLR clips imported fine in CS4, but not CS6. Also as another test, I tried importing on a different Mac computer using Premiere Pro CS6 (from creative cloud) and it imported perfectly. So I'm not sure why it's doing it on my computer? The files open fine in QuickTime.
The only thing that worked was I exported the .Mov files from the DSLR to a HDV .Mov file and it DID import correctly. I don't want to have to go through that step everytime though (or loss the quality)
Any ideas why this is happening? Thanks

I too am having this problem. The video I am trying to import is a .MOV file from a Canon 5D Mark III. When I check the properties of the file in Premiere Pro 5.5, this is what it says:
File Path: S:\Photos\5D mark 3\Video\0F2A0089
Type: QuickTime Movie
File Size: 55.7 MB
Source Audio Format: 48000 Hz - 16 bit - Stereo
Project Audio Format: 48000 Hz - 32 bit floating point - Stereo
Total Duration: 00:00:15:07124
Average Data Rate: 3.7 MB / second
QuickTime Details:
Movie contains 1 video track(s), 1 audio track(s) and 1 timecode track(s).
Video:
There are 453 frames with a duration of 1/29.97th.
Video track 1:
Duration is 454
Average frame rate is 29.91 fps
Video track 1 contains 1 type(s) of video data:
Video data block #1:
Frame Size = 1920 x 1080
Compressor =
Quality = Least (1.00)
Audio:
Audio track 1 contains 1 type(s) of audio data:
Audio data block #1:
Format = 16 bit - Stereo
Rate = 48000 Hz
Compressor = sowt
Timecode:
Timecode track 1 contains 1 type(s) of data:
Timecode data block #1:
Start Time = 00;00;39;04
Reel name =
As you can see PP 5.5 notices the video; it even tells me the # of frames in the video but it won't display it. It might be worth saying the video files from my Canon XF100 work just fine. This is extremely frustrating. Any help would be very much appreciated.

Cannot import .avi file, I only get audio and no video!

Im trying to import from an SDCard some video taken from a Samsung camcorder to import into iMovie09, when I play it on Quicktime I only get audio. I have tried MPEG Streamclip to convert the .avi file to another format but have not been successful. I used MediaInfo and these are the results:
Can anyone help me find a solution please?
General / Container Stream # 1
Total Video Streams for this File -> 1
Total Audio Streams for this File -> 1
Video Codecs Used -> Samsung MPEG-4
Audio Codecs Used -> U-Law
File Format -> AVI
Play Time -> 10mn 3s
Total File Size -> 161 MiB
Total Stream BitRate -> 2 236 Kbps
Video Stream # 1
Codec (Human Name) -> MPEG-4 Visual
Codec (FourCC) -> SEDG
Frame Width -> 720 pixels
Frame Height -> 480 pixels
Frame Rate -> 29.970 fps
Total Frames -> 18085
Display Aspect Ratio -> 1.500
Video Standard -> NTSC
Scan Type -> Progressive
Codec Settings (Summary) -> BVOP
Codec Settings (Packet BitStream) -> No
QF (like Gordian Knot) -> 0.178
Codec Settings (BVOP) -> Yes
Codec Settings (QPel) -> No
Codec Settings (GMC) -> No warppoints
Codec Settings (Matrix) -> Default (H.263)
Video Stream Length -> 10mn 3s 437ms
Video Stream BitRate -> 1 845 Kbps
Bit Depth -> 24 bits
Video Stream Size -> 133 MiB (83%)
Audio Stream # 1
Codec -> ADPCM
Codec (FourCC) -> 7
Audio Stream Length -> 10mn 3s 400ms
Audio Stream BitRate -> 384 Kbps
Audio Stream BitRate Mode -> CBR
Number of Audio Channels -> 1
Sampling Rate -> 48.0 KHz
Bit Depth -> 8 bits
Audio Stream Size -> 27.6 MiB (17%)
Thanks in advance!

Update to first post.
The Flip Video camcorder records or "captures" video in MPEG-4 advanced simple profile format, saved as an AVI file.
MPEG-4 advanced simple profile format = usually DivX
1.) With Mpeg streamclip you should be able to convert your AVI(Divx) files to a DV format for iMovie. To open DivX files, you have to install one of the free Divx Pro codecs on your system.
MPEG Streamclip 1.8
http://www.squared5.com/svideo/mpeg-streamclip-mac.html
DivX Pro Codec 6.6 (6-month trial)
http://www.divx.com/divx/mac/
2.) Visual Hub $24 should be able to convert WMV and AVI (compressed with the DivX Codec)to a DV format for iMovie.
http://www.techspansion.com/visualhub/
3.) With Flip4Mac WMV Player Pro $29 you can convert your WMV files for iMovie.
http://www.flip4mac.com/wmv.htm
4.) With Perian 0.5 and Quicktime Pro $30 you should be able to convert your AVI/DivX files to a DV format for iMovie.
http://perian.org/
I hope one of these solutions work for you.

Can only render Audio of QT,video is black

I received a Quick Time file via Dropbox. It's 1280x720, 23.98fps, Compressor H264, Square Pixel. It plays in QT player. But after I imported it in FCP v7 the video doesn't move, only the Audio plays after being rendered for Playback. The Video cannot be rendered. The Sequence Settings match the Clip. It's happened before to me, but I don't remember what the solution was. Can anybody suggest a solution to me? Thank you very much.

You ask anybody on this forum and they will tell you it's a no-no.
Some people prefer Compressor for all conversions, I prefer MPEG Streamclip for most - I haven't really found a difference.
I use Compressor to transform to mpeg-2 and AC3 for DVDs and JES Deinterlacer for deinterlacing and PAL <> NTSC transformations. I never use ProRes for SD and, in any case, you should use ProResLT, anything else is a waste.

Premiere Pro CS6 only importing audio .mov

Recently I've exported an XML file from FCP7 which seems to have translated well into Premiere. However, I am having trouble reconnecting the media onto a PC.
When I import the files into the project, only the audio plays, and not the video.
The files are XD Cam footage .mov
Outside of Premiere the files play perfectly in VLC player.
Any suggestions? I am a Premiere newbie.

[Below is copied and pasted from the other thread. As it's still the same problem, I'd like to keep it all here.]
animatedlies wrote:
I've installed Quicktime since then, but the .mov files are only playing audio in Quicktime and not the video. They play both audio/video in VLC player.
I tried creating a new Premiere project and importing the same files, and now I'm receiving an error code saying the codec is missing or unavailable.
Any suggestions why I am having issues importing .mov?
I am using Windows 8 Pro and Premiere Pro CS6.

FCPX Import movie file only importing audio?

FINAL CUT PRO X IMPORT ISSUE
When importing old dv converted movies (.mov format) from my FCP 6 Capture folders, I only get audio---there is no video file to edit.
The actual file in finder can play it just fine through QT.
I've tried transcoding, copying, leaving in place----nothing working.
Interestingly if I select the audio event in FCPX and select reveal in finder, it finds the copied file in FCPX folder structure and I can then play it Fine thru QT with video.
Ideas?

>old dv converted movies (.mov format)
the .mov file extension is not a format. It merely indicates a QuickTime container. The actual audio and video streams within that container could have been made from any number of codecs, some of which do not work natively in FCP.
Chances are the .mov file you're referring to was made using a non-native codec and would need to be converted prior to importing. But since you didn't mention the codec used, I can only guess about this.
-DH

CS5.5 - Only imports audio portion of video

Similar Messages

Maybe you are looking for