Cs5.5 PC download doesn't work

I bought the CS5.5 Production Premium years ago for my mac. I have only used the software on that one machine. I now have a Microsoft-based PC and would like to transfer the software over to this new computer so I deactivated the software on my mac and I found the download link on your website for the CS5.5 Production Premium and began downloading it. One of two files is supposed to be 6.9GB, but it only downloads approximately 2GB every time I try to download it. Even after unzipping the file, it still isn't 6.9GB and the file can't be used to download the software. The CS5 version downloads with no problems, but does not accept my license code.

It will not matter as far as trying to get the Windows version installed and working on the Windows machine if you purchased a Mac license.  The Mac license will only work with a Mac and CS5.5 does not qualify for a platform swap now that CS6 is the latest release CS version.

Similar Messages

  • Download stopped due to lack of space.  Later space available-download doesn't work!

    Made App store purchase of Mavericks,
    Download stopped due to lack of space.  Later space available-download doesn't work!
    Tried to download mavericks and got a message that there was insufficent space.  I made space and went back to the app store, "purchases" clicked on download button on the mavericks line and nothing happened.  I searched my hard drive but could not find any dmg file for it.  I can't download a new iphoto till I have mavericks. help!
    thanks and regards
    vats3

    Rentals are a one-time only download from the store. If you can't free up enough space on your phone for it then you can try the 'report a problem' link to contact iTunes Support and see if they grant you a redownload for your Mac : http://reportaproblem.apple.com
    If the 'report a problem' link doesn't work then you can try contacting iTunes Support via this page : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption

  • DOWNLOAD DOESN'T WORK AT 29.11.2004

    Why Download doesn't work? Will you fix it soon?

    Why Download doesn't work? Will you fix it soon?

  • Download doesn't work; i keep getting "unable to find firefox.exe" even when I open from program files folder; working onwindows xp with service pack 3

    download doesn't work; i keep getting "unable to find firefox.exe" even when I open from program files folder; working onwindows xp with service pack 3

    As you can see below, when I right click, I have no such option.  In the User Account Settings, I'm operating as the "System Administrator".
    Any other suggestions?

  • Translation from CS5 to Cloud doesn't  work correct, navi and linked images are broken.

    Translation from CS5 to Cloud doesn't  work correct, <navi> and linked images are broken.
    The data of CS5 was created at another PC. I installed Cloud version into two different PC. One has had the site data since dreamweaver CS5 and it works correct in Cloud version. Another PC got the site data from remote server and it doesn't work correct. <navi> and linked image are broken.

    Another PC got the site data from remote server and it doesn't work correct. <navi> and linked image are broken.
    This implies your site is not properly defined in DW.  Go to Site > Manage Sites.
    Or simply go to your other installation of DW and export the site definition file from Manage Sites.
    Save it to a flash stick or other removable drive.  Then import the STE file into your 2nd installation of  DW.
    Nancy O.

  • In photoshop CS5, Brush tool doesn't work on an adjustment layer

    In photoshop CS5, Brush tool doesn't work on an adjustment layer

    I Created an adjustment (Curves) layer and did the curves adjustment.  Then I did an Edit Fill (Normal Mode, 100% Opacity and Use: Black).
    I then try to use the brush tool, but it doesn't work.  I've done this hundreds of times before and suddenly it's not working.  Rebooted the system, but that didn't help.
    I know how to do a screen shot, but it doesn't paste onto this screen.  How do I get that to you?
    thanks for your help

  • I click on the "DOWNLOAD" Button to download the newest iTunes version, but the download doesn't work.

    When I pluged in my iPad, I was told to download the newest version of iTunes. But the download doesn't work. There is no message about this, except "Thank you for downloading iTunes".
    What can I do?
    Thank you for your answer.
    Peter

    Hello REIP,
    Thanks for using Apple Support Communities.
    For more information on this, take a look at:
    iTunes: How to install the latest version
    http://support.apple.com/kb/ht5654
    Windows: Choose Help > Check for Updates
    Best of luck,
    Mario

  • Upload working fine, download doesn't work

    Upload working fine, download doesn't work on my PC

    Sign in at OVI from a PC or laptop and Reinstall Ovi Store on your device.
    ‡Thank you for hitting the Blue/Green Star button‡
    N8-00 RM 596 V:111.030.0609; E71-1(05) RM 346 V: 500.21.009

  • Mavericks download doesn't works for me.

    Hello, I been trying to download Mavericks 10.9.4 from Apple store, but doesn't work. Over and over again that i try to download it, shows an error, this one:
    I have a Mackbook white unibody from 2010 with Snow Leopard 10.6.8
    Can anybody help me upgrade my mac?

  • Adobe Photo Downloader doesn't  work for me

    I've installed the trial version of Lightroom. It installed the photo downloader, which would be fine, except that it doesn't do anything - it never pops up when I insert a card. If I explicitly select "Launch" from its menu, nothing happens. I can't get Lightroom to automatically detect a card insert at all, even the option to pop up the import dialog doesn't work.
    What's worse, is that I also have Elements 3 installed, and this new version of downloader seems to have replaced the one that comes with Elements, so now I have no auto-downloading at all.
    I've tried running apdproxy.exe from the command line after killing the running one, but it doesn't print any useful diagnostics. There's nothing in the event log either. Can anyone help me diagnose this?
    Thanks!

    That happened to me until I did an Import in LR, then the auto-load worked every time after that.

  • Download doesn't work

    tried 2 times
    closed safari etc
    say blocked plug in
    it worked fine before this
    need to SPEAK to a PERSON
    PLEASE
    JODI

    Restart your computer.
    I downloaded Flash Player 12 as prompted by my know-it-all computer. Then I was blocked. I made sure Safari Preferences were set as required by Adobe: Security - make sure to allow plug-ins and under General - make sure to tick the box that allows opening safe failes after download. Still nothing.
    I uninstalled all Flash Players (11 and 12). Then I reinstalled. Now instead of being blocked my computer didn't even recognize that I had Flash Player. There's no prompt to restart the computer. But I finally did and now it's working.
    So try restarting. If that doesn't work, uninstall all older versions or all versions, reinstall, and restart.
    And BTW, I called Adobe Support only to be told if I wanted help I'd have to pay $59 for support. So Adobe gives me a gift of freeware but says I have to pay them to hand me the scissors to cut the ribbon? I don't think so. Especially when I knew it would take them 3 seconds to give me an answer.
    Adobe? I hope you're reading this. Shame on you for not prompting to restart the computer and double shame on you for telling me I'd have to pay you to get freeware working.

  • Mavericks download doesn't work

    I'm on OS 10.6.8 now, trying to update to Mavericks.
    However, the download doesn't seem to work: for some reason it paused, and I can't get it to start again. Right clicking the Dock icon and hitting "Resume" or "Cancel download" doesn't do anything. The only thing I can do is drag the icon off the Dock, after which it disappears. However, when I try to retry downloading it, clicking "Install App" in the App Store doesn't do anything.
    I've tried logging out and in, and even restarting, but that doesn't fix it. However, when I do log in, the Mavericks download icon appears in the Dock, saying "Paused".
    I also noticed in the Activity Monitor that "kernel_task" uses most of my CPU all the time, even when I have no programs open. This never happened before I tried installing Mavericks. Could it be related?
    Please help!
    Bob_

    Here's a screenshot of the Mavericks download, stuck on Pause.

  • Moutain Lion's Download doesn't work for me...

    I've bought Os x Mountain Lion on the Mac App Store but when i look at the "download status" on lauchpad it's still on "0" (the download line stays on the smallest position) what can i do ? I've been rebooting my mac for 3 times and i doesn't work...
    -> sorry for my english if i've done some mistake but i'm french so... 8-)

    Thank you so much dominic23 ! I think i've got a bug on my Lauchpad because the status (progress) bar doesn't move.
    When i take a look at the page linked to the download tab i can see how many time it will take, ... and everythings is obviously alright.

  • Flash CS5: Export SWC doesn't work

    Could anyone help me with this problem. I have Flash CS5 and I'm trying to export SWC from it to use as a library with Flex SDK (FlashDevelop). I have "Export SWC" checked in publish settings and for a while it worked. Now, even if it still is checked, SWC isn't created (at least in the same directory as SWF). I even tried creating a completely new FLA and copied everything from the old library in there. Still it doesn't work.

    I periodically run into this issue too. I tried various 'voodoo' practices like:
    removing old versions of the exported files first
    reverting to "Use Default Names" on the Formats tab
    adding HTML as a Type
    removing HTML as a Type
    un-checking "Include XMP metadata"
    But I still haven't found out what makes or breaks the magical SWC export...
    I'm using Flash CS5 Professional 11.0.2.489 on a PC
    Publishing as AS3, Player 10
    The .fla is quite large, 7,200 KB,
    The resulting .swf is 1,808 KB...
    still no swc...
    Anyone else have any tips on this issue?

  • Safari download doesn't work

    Previously I was using Safari 6.1 on my MBP (OS X 10.7.5) and all was good until I had a window telling me that my current version of Safari was no longer supported by youtube.
    I downloaded Safari 7.x and now it will not open. The new Safari icon in the Applications folder has a white circle with diagonal slash (like the NO or Do Not Enter signs) and when it is Clicked there is a window saying "You can't use this version of Safari with this version OS. You have 10.7.5 and it requires 10.9."
    I tried downloading Safari 6.1 and it said the download was successful. But the newer Safari icon (described above) remains in the Applications folder. Even tried downloading Safari 6.1 to another location (User's directory) but it won't open there and that doesn't work either.
    How do I get Safari back?
    And I'm assuming I've probably lost all my bookmarks and history too!
    Help, please.

    Thanks dominic23… I do have my data backed up . Just that Safari doesn't work now.
    And thanks QuickTimeKirk for your suggestions.
    You mean the ONLY way I can get Safari back is to restore the Operating System?
    When trying to install a version of anything that is not compatible with the OS you normally get a window saying such. And the OS doesn't allow the installation. In this case the OS allowed the installation thereby killing the working version and leaving an incompatible version. So I'm out a working version of Safari unless I restore the entire OS?
    Surely there's another way. Thanks again!!

Maybe you are looking for

  • NO Expense GL/Purchase Order not reflecting in 0FIGL_14

    Hi All, 1) We want GL expense data from 0FIGL_14 but the system is showing RECON GL accounts which we don't want. 2) No PO data is populaing in 0FIGL_14 Can anyone help in this issue? Thanks, Mayur

  • Table based on one data service but filtered by a second data service

    Hi, I'm fairly new to VC and have got comfortable with a few simple scenarios. However, I'm trying to apply some fundamental logic that must be possible and I'm guessing straight forward. I have a data service that contains document type master data

  • Dekstop pictures keep resetting on login???

    I recently added a second monitor to my '06 white 24" iMac running OSX 10.6.4 and ever since installing the second monitor my Desktop Picture settings are being completely ignored? In other words, every time I log in my desktop picture reverts to the

  • Is OPL5 setting for 2LIS_04_P_MATNR required in each client?

    I did settings in transaction OPL5 for the required plant and order type in my configuration client. This does not reflect in my test client in the same BW server. The test client is locked down from changes and hence it does not allow me to make cha

  • Album 1.0

    I have a backup of photoshop album 1.0 on an external drive. How do I download to elements 12.0?