CS5 6.3 RAW File not reopening with changes saved from .xmp file?
I recently upgraded from my D70 to a D7000, and downloaded the new plug-in for CS5 RAW (since the D7000's raw images weren't readable). I have no problem opening my photos in RAW 6.3, and tweaking them (just like before). When I'm done and want to save my changes I click "Done" and a .xmp file is saved just like before. However, when I re-open the same RAW file the changes that I previously made seem to have never happened, and I'm back to scratch (which would only happen before if I had deleted the correlating .xmp file). What's going on?? Help!!
edit: The .xmp files are saved next to the raw file in the same folder
In Edit - Preferences - Camera Raw, what is your choice for where to store the settings?
-Noel
Similar Messages
-
IMAQ image to array vi not working with images extracted from avi file
Hi,
I downloaded some avi's and uncompressed them so that I can analyze them within labview. I am trying to convert images I am reading from the avi file to an array. When I use "IMAQ image to array" I get the following error " IMAQ Image To Array Invalid image type" -1074396080.
I am able to display each read image and save them to the hard drive, but I am unable to convert the vision image to array. I verified that the image extracted from avi is the same as the image type I created in memory to hold the image.
Please see the attached vi I created.
thank you
Ruz
Attachments:
example2.vi 62 KBHi all, this thread was useful for me...but i have another doubt... when I try to extract a single plane (Luminance, Saturation, R,G,B...anyone) and try to save it in jpg as gray image, it saves an image with blue tones. I have examinated it using Matlab and checked that Red plane has low values (but not zero), the same for G plane and high values for B plane. An image of the VI is attached.
Thanks in advance
Attachments:
planes.png 28 KB -
Latest Lithroom 5.6 does not recognize my .cr2 raw file format and Windows 7 it asociates with my older raw plug in in Ps CS5.5. I am not able to change default program for .cr2 in the properties pannel...
every new released update of Lr from v 5.2 changed somethin in my Windows 7 Professional settings. I am stucked. Can somebody help me please? Many thanks. AndrejHi Jim,
yes after I imported my .cr2 raw files into new catalog it started to work. Windows 7 still does not recognize them but I can edit them as you said within the Lr5.6 and then export them into .psd or .dng files...as needed.
I bought Lr5 only because I got present - my new camera Cannon 70D and because my older Photoshop CS5.5 raw plugin does not recognize. cr2 files.
Many thanks for your help.
Andrej. -
I redownloaded my Photoshop CS5 and Camera Raw will not accept my RAW files nor will the Adobe Bridge display the picture view of these files. A message displays saying it doesn't support this camera. I have a Nikon 5100 DSLR Camera. It always displayed them in the past. How can I get it to display these photos in Bridge and open them in RAW?
Adobe - Adobe Camera Raw and DNG Converter : For Windows : Camera Raw 6.7 Update
Adobe - Adobe Camera Raw and DNG Converter : For Macintosh : Camera Raw 6.7 Update
Benjamin -
Can't open file--"not compatible with this version"
I can not open a photoshop file, although it was saved with the same version. "The file is not compatible with this version" can someone help me.
thankshi kirsti
I use windows 7 and photoshop cs5
thank you
Am 02.05.2012 19:06, schrieb Kirsti Aho:
>
Re: Can't open file--"not compatible with this version"
created by Kirsti Aho <http://forums.adobe.com/people/Kirsti-CA> in
/Community Help Application/ - View the full discussion
<http://forums.adobe.com/message/4374618#4374618 -
Hello,
my problem is with importing saved .json backup file in fresh installed firefox 3.6.8? Message "unable to process the backup file", when i choosed option "Restore" from menu "organize your bookmarks" !?
Normally that i followed all instructions from your support site, and that i tried many things, but nothing helped :( !?
my .json file isn't corrupted cause it was saved on another partition before formatting my OS.
Please don't tell me that my bookmarks are lost :( cause i had many important things in that bookmarks, on 100.s pages :( ....
Thanks in advance!
Sincerely,
hoho33"
Can you restore that JSON backup in a new profile?
Did you make sure that it is really a JSON backup and that there is no missing or hidden other file extension?
A JSON backup starts with: {"title":"","id":1,"dateAdded"
A HTML backup starts with: <!DOCTYPE NETSCAPE-Bookmark-file-1>
You can try if you can restore that JSON backup in a new profile.
Create a new profile as a test to check if your current profile is causing the problems
See Basic Troubleshooting: Make a new profile
If that new profile works then you can transfer some files from the old profile to that new profile (be careful not to copy corrupted files)
See http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox
Please for administration of this support site, make possibility to quote someone's answer, on this way is dificult to answer somebody who wrote some suggestion!
No, i can't restore JSON backup in new profile, even on fresh installed OS XP SP3, with fresh installation of latest version of firefox!
MAN I TOLD YOU 10X IT'S 200 % JSON BACKUP FILE!!! I'M NOT IN IT FROM YESTERDAY, I WORK IN IT 12 YEARS!!!
I tried restoring json backup in new profile, but nothing, i couldn't restore, cause that stupid error from screen shot which i posted again appears !
Man i'm not totally noob i repeat 2nd time here, and normally that i know to create new profile, and that i tried that, but that didn't help!
I can't believe that FIREFOX has not good support team, and doesn't care for yours users, this will not give me more reason to use in future firefox
like borwser, if i don't have good support, and when i have problem like this, to loose all my very important bookmarks and passwords on them, and
firefox support won't to help me to solve my problem!
If somebody from firefox support team read this, i can give you Remote desktop access to my computer to try solve this problem, like other serious company
like HP, Dell , etc. give remote desktop support to their users!
Corel are you from firefox support team? Please don't write same suggestions, cause i know to read, and i understand well if you write once some suggestion!
Greetzz -
"Could not get the audio data from the file" error
Hi
I get a lot of "Could not get the audio data from the file" errors when opening a project. Sometimes they crash Premiere Pro CC 7.01 (Mac). But if not Premiere works as usual, with the audio.
I tried to convert the audio files (coming from Audition) from 32 to 16 bit. It worked while opening a project once, but not the following times.
Where can it come from ?
Edit: I also get this error when importing audio: "Error: Premiere Pro version 7.0 is not compatible with the Premiere Pro Plug-in version 5.7.4". Maybe it is connected.Got it! It was the Smartsound plugin making trouble. Got rid of it and no more errors.
-
I keep getting this annoying window that pops up while surfing Drudge:
File not found
Firefox can't find the file at /C:/Program Files/Mozilla Firefox/D>èÎß&̪H¿MH¿%1BnàŽ–âPÕ”6´6—%06%1B%0FÜ… ¢Oóü&Ùß%03[Ò–‚Ø%%1C#%17E±MgÓ˜Û%04goS£‡Å…ovûU%08êïÇÔý„€®ÙØ–!gäø½.
Check the file name for capitalization or other typing errors.
Check to see if the file was moved, renamed or deleted.
Do you have any idea how to get rid of this annoying pop-up? I searched for that file name on Google, but nothing came up.
This only started happening after the Scareware program, Open Cloud Security, infected my computer a few days ago. My wife got into my registry to remove Open Cloud, but now I am left with this annoying Firefox problem. I have to close the annoying window TWICE to get back to Drudge.
This happens 6 times per hour.
Thanks -
PIX515 version 7.0 and router 2811 ver 12.3r8 not able to receive emails from gmail files larger than 2M
MatejLach wrote:
clamd is running, user and group clamav all have the relevant permissions as far as I can tell, however upon scanning my mail, I always end up with the following error:
Scanning error:
/home/username/.claws-mail/mimetmp/0000000e.mimetmp: lstat() failed: Permission denied. ERROR
Seems like a permissions error to me... maybe check the actual file it is attempting to scan... I know it is in your home folder, but just to be sure, you might want to check that everything is sane. -
HI
i restored a sharepoint web 80 application in our test domain
and after when i browse the new web application
it says
Cannot make a cache safe URL for "1025/styles/Themable/corev4.css", file not found. Please verify that the file exists under the layouts directory.
adilHi adil,
According to your description, my understanding is that you encountered the error “Cannot make a cache safe URL for "1025/styles/Themable/corev4.css", file not found. Please verify that the file
exists under the layouts directory.” .
The issue happens in
We have customized master page
In the master page, we use path the script/style file like this: <SharePoint:CssRegistration name="<% $SPUrl:~SiteCollection/Style Library/coe/mainCOE.css%>"
runat="server"/>
While using the dynamic path in a multiple languages enabled site, language Id(1033 etc) will be added to the path automatically. That cause the file to be not found.
To solve the issue, please download the Arabic language pack http://www.microsoft.com/en-us/download/details.aspx?id=3411 ,
install it on your SharePoint and refresh your browser.
Reference:
http://sharepoint-community.net/profiles/blogs/cannot-make-a-cache-safe-url-for-1036-sytles-themable-corev4-css
Best Regards,
Eric
Eric Tao
TechNet Community Support -
I have nine, 1-page PDF files that are accessible and need to combine into 1 PDF file. I have tried appending, adding and the combine PDFs process. The file created is not keeping my changes. The created file is partially accessible but I have to re-fix issues I had fixed in the single files. I need suggestions on what else can be done if any. Using Acrobat pro XI.
Out of habit, I tend to combine PDF files in the Page Thumbnails pane by right-click then "Insert Pages" -> "From File". For me, this preserves the tags from both documents, although the tags may have to be moved into the right location (if I recall correctly the tags for the inserted pages get put at the end of the tag structure, regardless of where the pages are inserted), If I first put the tags for the document to be inserted inside a container tag like Section, it makes the process easier. Moving that set of tags to the right place is the only re-fixing that I recall having to do. What behavior are you experiencing?
a 'C' student -
HP C6180 not responding with wireless print from Mac OS X 10.9
My Printer does not work with wireless printing from my Macbook Air OS X 10.9
I tried all the normal stuff I can find.
The text that is there is: The Printer is not responding.Hi XavierMaassen,
I understand you have a Photosmart C6180 that you're having issues using in Mac 10.9. I'm sorry to hear this has been happening, but I will certainly do my best to assist you.
I'm wondering how you installed the printer. If you had it installed prior to upgrading to 10.9 that could be part of the problem. There are currently no HP drivers available for this printer for 10.9, so you need to uninstall the HP software and install the printer via the Apple updates. Once you do that you should be able to print normally and scan using 3 different methods.
Hope this helps, have a great day!!
Please click “Accept as Solution ” if you feel my post resolved your issue, as it will help others find the solution faster
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
**MissTeriLynn**
I work on behalf of HP -
How can I make PSE8 to read "Rating" from XMP files?
Hi, I'm trying to share "Rating" perameter between Lightroom2 and Photoshop Elements8.
PSE8 can't seem to read the perameter from XMP files created by Lightroom2.
I did following steps.
1. (Lightroom2) Configure a camera RAW file named aaa.cr2 and rate it as five stars.(I use a Canon DSLR. )
2. (Lightroom2) Make a XMP file corresponding to the file. aaa.xmp is created in the same directory.
3. (Explorer and notepad) Open aaa.xmp with a notepad.exe and check "Rating" is set five.
4. (PSE8) Open aaa.cr2 as PSE8 Organizer. Its thumbnail is applied configured parameters by Lightroom2 such as exposure compensation to.
5. (PSE8) However, rating parameter in PSE8 orginizer still shows zero star.
It'a feature? Or something is strange?
Can someone help me?Hi, John.
Follwing XML is one of my XMP file created by lightroom2.
I rated this CR2 file as three stars and <xap:Rating>3</xap:Rating> means it,
but PSE8 doesn't read this parameter even if I started Elements Orginizer.
When I select "update thumnail", Orginizer applys lighturoom2's effect to thumnail,
and Camera RAW plagin can open the file with all lightroom's effects applied. However, stars still shows zero.
Shoud I do something to make PSE8 to read it?
<x:xmpmeta xmlns:x="adobe:ns:meta/" x:xmptk="Adobe XMP Core 4.2-c020 1.124078, Tue Sep 11 2007 23:21:40 ">
<rdf:RDF xmlns:rdf="http://www.w3.org/1999/02/22-rdf-syntax-ns#">
<rdf:Description rdf:about=""
xmlns:tiff="http://ns.adobe.com/tiff/1.0/">
<tiff:Make>Canon</tiff:Make>
<tiff:Model>Canon EOS 40D</tiff:Model>
<tiff:Orientation>8</tiff:Orientation>
<tiff:ImageWidth>3888</tiff:ImageWidth>
<tiff:ImageLength>2592</tiff:ImageLength>
</rdf:Description>
<rdf:Description rdf:about=""
xmlns:exif="http://ns.adobe.com/exif/1.0/">
<exif:ExifVersion>0221</exif:ExifVersion>
<exif:ExposureTime>1/20</exif:ExposureTime>
<exif:ShutterSpeedValue>4321928/1000000</exif:ShutterSpeedValue>
<exif:FNumber>35/10</exif:FNumber>
<exif:ApertureValue>361471/100000</exif:ApertureValue>
<exif:ExposureProgram>4</exif:ExposureProgram>
<exif:ISOSpeedRatings>
<rdf:Seq>
<rdf:li>400</rdf:li>
</rdf:Seq>
</exif:ISOSpeedRatings>
<exif:DateTimeOriginal>2009-10-31T21:02:41.01+09:00</exif:DateTimeOriginal>
<exif:DateTimeDigitized>2009-10-31T21:02:41.01+09:00</exif:DateTimeDigitized>
<exif:ExposureBiasValue>0/1</exif:ExposureBiasValue>
<exif:MaxApertureValue>3/1</exif:MaxApertureValue>
<exif:MeteringMode>6</exif:MeteringMode>
<exif:Flash rdf:parseType="Resource">
<exif:Fired>False</exif:Fired>
<exif:Return>0</exif:Return>
<exif:Mode>2</exif:Mode>
<exif:Function>False</exif:Function>
<exif:RedEyeMode>False</exif:RedEyeMode>
</exif:Flash>
<exif:FocalLength>18/1</exif:FocalLength>
<exif:CustomRendered>0</exif:CustomRendered>
<exif:ExposureMode>0</exif:ExposureMode>
<exif:WhiteBalance>0</exif:WhiteBalance>
<exif:SceneCaptureType>0</exif:SceneCaptureType>
<exif:FocalPlaneXResolution>3888000/876</exif:FocalPlaneXResolution>
<exif:FocalPlaneYResolution>2592000/583</exif:FocalPlaneYResolution>
<exif:FocalPlaneResolutionUnit>2</exif:FocalPlaneResolutionUnit>
<exif:PixelXDimension>3888</exif:PixelXDimension>
<exif:PixelYDimension>2592</exif:PixelYDimension>
</rdf:Description>
<rdf:Description rdf:about=""
xmlns:xap="http://ns.adobe.com/xap/1.0/">
<xap:ModifyDate>2009-10-31T21:02:41.01+09:00</xap:ModifyDate>
<xap:CreateDate>2009-10-31T21:02:41.01+09:00</xap:CreateDate>
<xap:Rating>3</xap:Rating>
<xap:MetadataDate>2009-11-02T01:39:31.622-09:00</xap:MetadataDate>
</rdf:Description>
<rdf:Description rdf:about=""
xmlns:aux="http://ns.adobe.com/exif/1.0/aux/">
<aux:SerialNumber>1510805163</aux:SerialNumber>
<aux:LensInfo>18/1 50/1 0/0 0/0</aux:LensInfo>
<aux:Lens>18-50mm</aux:Lens>
<aux:ImageNumber>0</aux:ImageNumber>
<aux:FlashCompensation>0/1</aux:FlashCompensation>
<aux:Firmware>1.1.1</aux:Firmware>
</rdf:Description>
<rdf:Description rdf:about=""
xmlns:crss="http://ns.adobe.com/camera-raw-saved-settings/1.0/"
xmlns:crs="http://ns.adobe.com/camera-raw-settings/1.0/">
<crss:SavedSettings>
<rdf:Bag>
<rdf:li rdf:parseType="Resource">
<crss:Name>読み込み</crss:Name>
<crss:Type>Snapshot</crss:Type>
<crss:Parameters rdf:parseType="Resource">
<crs:Version>5.3</crs:Version>
<crs:WhiteBalance>As Shot</crs:WhiteBalance>
<crs:Exposure>0.00</crs:Exposure>
<crs:Shadows>5</crs:Shadows>
<crs:Brightness>+50</crs:Brightness>
<crs:Contrast>+25</crs:Contrast>
<crs:Saturation>0</crs:Saturation>
<crs:Sharpness>25</crs:Sharpness>
<crs:LuminanceSmoothing>0</crs:LuminanceSmoothing>
<crs:ColorNoiseReduction>25</crs:ColorNoiseReduction>
<crs:ChromaticAberrationR>0</crs:ChromaticAberrationR>
<crs:ChromaticAberrationB>0</crs:ChromaticAberrationB>
<crs:VignetteAmount>0</crs:VignetteAmount>
<crs:ShadowTint>0</crs:ShadowTint>
<crs:RedHue>0</crs:RedHue>
<crs:RedSaturation>0</crs:RedSaturation>
<crs:GreenHue>0</crs:GreenHue>
<crs:GreenSaturation>0</crs:GreenSaturation>
<crs:BlueHue>0</crs:BlueHue>
<crs:BlueSaturation>0</crs:BlueSaturation>
<crs:FillLight>0</crs:FillLight>
<crs:Vibrance>0</crs:Vibrance>
<crs:HighlightRecovery>0</crs:HighlightRecovery>
<crs:Clarity>0</crs:Clarity>
<crs:Defringe>0</crs:Defringe>
<crs:HueAdjustmentRed>0</crs:HueAdjustmentRed>
<crs:HueAdjustmentOrange>0</crs:HueAdjustmentOrange>
<crs:HueAdjustmentYellow>0</crs:HueAdjustmentYellow>
<crs:HueAdjustmentGreen>0</crs:HueAdjustmentGreen>
<crs:HueAdjustmentAqua>0</crs:HueAdjustmentAqua>
<crs:HueAdjustmentBlue>0</crs:HueAdjustmentBlue>
<crs:HueAdjustmentPurple>0</crs:HueAdjustmentPurple>
<crs:HueAdjustmentMagenta>0</crs:HueAdjustmentMagenta>
<crs:SaturationAdjustmentRed>0</crs:SaturationAdjustmentRed>
<crs:SaturationAdjustmentOrange>0</crs:SaturationAdjustmentOrange>
<crs:SaturationAdjustmentYellow>0</crs:SaturationAdjustmentYellow>
<crs:SaturationAdjustmentGreen>0</crs:SaturationAdjustmentGreen>
<crs:SaturationAdjustmentAqua>0</crs:SaturationAdjustmentAqua>
<crs:SaturationAdjustmentBlue>0</crs:SaturationAdjustmentBlue>
<crs:SaturationAdjustmentPurple>0</crs:SaturationAdjustmentPurple>
<crs:SaturationAdjustmentMagenta>0</crs:SaturationAdjustmentMagenta>
<crs:LuminanceAdjustmentRed>0</crs:LuminanceAdjustmentRed>
<crs:LuminanceAdjustmentOrange>0</crs:LuminanceAdjustmentOrange>
<crs:LuminanceAdjustmentYellow>0</crs:LuminanceAdjustmentYellow>
<crs:LuminanceAdjustmentGreen>0</crs:LuminanceAdjustmentGreen>
<crs:LuminanceAdjustmentAqua>0</crs:LuminanceAdjustmentAqua>
<crs:LuminanceAdjustmentBlue>0</crs:LuminanceAdjustmentBlue>
<crs:LuminanceAdjustmentPurple>0</crs:LuminanceAdjustmentPurple>
<crs:LuminanceAdjustmentMagenta>0</crs:LuminanceAdjustmentMagenta>
<crs:SplitToningShadowHue>0</crs:SplitToningShadowHue>
<crs:SplitToningShadowSaturation>0</crs:SplitToningShadowSaturation>
<crs:SplitToningHighlightHue>0</crs:SplitToningHighlightHue>
<crs:SplitToningHighlightSaturation>0</crs:SplitToningHighlightSaturation>
<crs:SplitToningBalance>0</crs:SplitToningBalance>
<crs:ParametricShadows>0</crs:ParametricShadows>
<crs:ParametricDarks>0</crs:ParametricDarks>
<crs:ParametricLights>0</crs:ParametricLights>
<crs:ParametricHighlights>0</crs:ParametricHighlights>
<crs:ParametricShadowSplit>25</crs:ParametricShadowSplit>
<crs:ParametricMidtoneSplit>50</crs:ParametricMidtoneSplit>
<crs:ParametricHighlightSplit>75</crs:ParametricHighlightSplit>
<crs:SharpenRadius>+1.0</crs:SharpenRadius>
<crs:SharpenDetail>25</crs:SharpenDetail>
<crs:SharpenEdgeMasking>0</crs:SharpenEdgeMasking>
<crs:PostCropVignetteAmount>0</crs:PostCropVignetteAmount>
<crs:ConvertToGrayscale>False</crs:ConvertToGrayscale>
<crs:ToneCurveName>Medium Contrast</crs:ToneCurveName>
<crs:ToneCurve>
<rdf:Seq>
<rdf:li>0, 0</rdf:li>
<rdf:li>32, 22</rdf:li>
<rdf:li>64, 56</rdf:li>
<rdf:li>128, 128</rdf:li>
<rdf:li>192, 196</rdf:li>
<rdf:li>255, 255</rdf:li>
</rdf:Seq>
</crs:ToneCurve>
<crs:CameraProfile>Adobe Standard</crs:CameraProfile>
<crs:CameraProfileDigest>730B5111DF7449A8EE0790633B8D3861</crs:CameraProfileDigest>
</crss:Parameters>
</rdf:li>
</rdf:Bag>
</crss:SavedSettings>
</rdf:Description>
</rdf:RDF>
</x:xmpmeta> -
I backed up my bookmarks to an external drive, rebuilt my system, and now when I try to restore from that file, I get "unsupported file type" How can I restore from this file?
Make sure that the backup file with the bookmarks has the correct file extension: .html for a HTML backup and .json for a JSON backup.<br />
You can check that via the right-click context menu of that file and open the Properties.<br />
If you are not sure about the file type then you can open the file in Firefox via "File > Open File"<br />
A JSON backup will show as one long text line without line breaks and a HTML backup as a web page with clickable links.<br />
A JSON backup starts with: {"title":"","id":1,"dateAdded":<br />
An HTML backup starts with: <nowiki><!DOCTYPE NETSCAPE-Bookmark-file-1></nowiki>
You may need to add quotes ("") around the name to rename the file to the correct file extension.
See also:
* http://kb.mozillazine.org/Backing_up_and_restoring_bookmarks_-_Firefox -
When I run VI analyzer and open our standard config file, the message "Some VIs and/or tests have been added to or removed from your file system since you last saved this configuration file." appears. Upon clicking OK, selecting something to analyze, and moving on to the VI Analyzer - Select Tests dialog, the Tests selection control is completely empty and the Analyze button is greyed out.
I'm runing LabVIEW 2013 on Windows 7, VI analyzer did work before, and I have tried both repairing and uninstalling LabVIEW (then reinstalling) already. If I do not select a config file or try to reset all test configurations, the Tests control remains empty.
Is there any way to reinstate the tests, or fix just the VI Analyzer toolkit?
The only thing that I remember changing since I last ran the analyzer is that I installed DIAdem.
Solved!
Go to Solution.The suggested search (from LV2013) brought me to the 2014 toolkit,
That is unfortunate.
Perhaps the Tools network needs a tweak
But, I had assumed you had your SSP up to date and LabVIEW 2014 installed. The download would have worked then
Jeff
Maybe you are looking for
-
Mail Flag only on incoming msgs??
Hi and thanks for reading. While I have a Flag Mail folder on my mac which is showing all flagged mails, on my iPhone and iPad I have only a Flagged mail folder which is related to incoming mail only... so, if I flag a mail in my sent mail folder it
-
hi, actually i wannna know about user dependencies . i know that there are two ways to use user dependencies ..........can u elobarate in details about user dependencies in xi.. with examples..in both the ways... thanks in advances. jp.
-
Authorizing a computer to play songs
With the new iTunes allowing for iPods to be on more than one computer I was wondering if I authorize a computer to play songs will it allow them to be played and that is all? I just need the songs authorized to play on a computer but if I do will th
-
hey, i just got my canon 550d, and i updated to ACR 5.6 but PS CS4 still wont read the .CR2 files. Did i do something wrong or do i have to wait for a newer version of ACR? Thanks.
-
Hi All, I am new to planning.....Can you please let me know about below questions 1)What is the purpose/use of Workflow in planning 2)Can you please let me know how step by step process happens when a work flow is initiated(any flow diagram available