CS5.7 cannot open CS5.5 Indesign files

Hi, we have several designers located around the globe, that all need to be able to access & change the same design files, mostly Indesign.  They are all using Applemacs, but all have different CS versions, i.e. CS5.5, 5.7 and 6.8.0.1.  We already had problems where a 5.7 user couldn't open a file saved by a 5.5 user.  If my logic serves me correct, newer versions of software should be able to open older versions' files, but the opposite would not be necessarily true.  Or does CS operate differently?
Do you have any advice, please  are they doing something wrong?
Thx!
Chris

Ask in the ID forum.
Mylenium

Similar Messages

  • Cannot open Nikon 1V2 Raw files in CS5

    Hello!
    I cannot open Nikon 1V2 Raw files in CS5
    Camera Raw Version is 5.0.0.178, PS CS5 Version 11.0.2
    Anyone have a suggestion that does not involve upgrading to a newer version of Photoshop?
    Thanks!
    Kelly

    Does this mean that I can't get Camera Raw 7.3 with Photoshop CS5?
    Naturally.
    Photoshop CS5 does not use ACR 7.
    I did read about using the free DNG Converter but that seems like an extra step I would prefer to avoid if possible.
    Either upgrade Photoshop or use another means to process the RAW files, and cost-wise DNG Converter can hardly be beat.

  • Cannot open Nikon D4 NEF files in Photoshop CS5

    Cannot open Nikon D4 NEF files in Photoshop CS5 and Camera Raw 6.6 … any suggestions?

    Thanks for your reply
    .... strange? in the document you mention above the Nikon D4 is not mentioned as being newly supported and yet when I went to get info about this:
    http://www.adobe.com/products/photoshop/extend.html
    It says that the D4 should be OK in Camera Raw 6.6.
    I confess to being slightly confused.

  • Cannot open Nikon D4 NEF files

    Cannot open Nikon D4 NEF files in Photoshop CS5 and Camera Raw 6.6 … any suggestions?

    I am now officially perplexed. Tried all of the following
    a) Cleaned up appdata/Adobe/Camera RAW => tried opening the RAW file, (each time a different one so I don't use the same XMP)
    b) Removed the Photoshop preferences file   =>  ""
    c) Removed Registry entry for Camera RAW =>  ""
    d) Uninstalled CS5.5 and re-installed (as suggested by Adobe Customer service folks) => ""
    DIDNT WORK. YES, I USED UPDATE FEATURE IN PHOTOSHOP TO GET LATEST CAMERA RAW, NOT RC
    e) Installed CS6, went straight for updates and it did install Camera RAW 7.1.
    Tried to open the file, same old message.
    And, I also downloaded Lightroom 4.1. Couldn't import the files. Went straight for the update, nope, it said I don't need any.
    It's now been 48 hours into this problem and never been more frustrated.

  • TS3212 Still unable to download itunes to my pc. Tried with IE, Mozilla and Google Chrome. Keep getting an error message :"Windows cannot open itunes.exe the file is corrupt contact support."previous itunes files were wipped out by "disk cleaner." Any hel

    Still unable to download itunes to my pc. Tried with IE, Mozilla and Google Chrome. Keep getting an error message :"Windows cannot open itunes.exe the file is corrupt contact support."previous itunes files were wipped out by "disk cleaner." Any help??
    Please!
    Thanks!

    If anyone is reading this still looking for what caused the issue and how to fix it here is what I discovered.
    The antivirus program our company uses, Bitdefender Antivirus Plus, was causing some of the PDF files not to open. After troubleshooting the different modules and settings the culprit was..
    Scan SSL in Privacy Control Settings. Turning it OFF solved the problem and all the PDF files that previously would not open now open just fine. This issue has been sent to Bitdefender for them to review. If you use a different antivirus program and are having this issue try locating the Scan SSL setting and see if turning it off solves the problem.

  • Cannot open .xls or .doc files

    I have office 2008 updated to the latest version operating on a mac osx 10.5.8. I cannot open xls or doc files. I get the messages "file cannot be opened" and "file blocked".
    Have tried
    - opening via right click and through the programs themselves
    - installing updates
    Any suggestions welcome.

    Hello,
    This forum is for troubleshooting Apple Software Update for Windows, a software package for Windows designed to update Apple products that run on Windows, and not related to Microsoft Office. Please post Office related questions on Microsoft's own forums for their Mac products.
    http://www.officeformac.com/productforums
    Good luck...

  • I have just upgraded to OSX 10.6.8 and now I cannot open or save PDF files from the internet. I get a dialogue box saying the QuickTime plugin has failed. I have tried to download the latest plugin but this doesn't work. Can anyone help?

    I have just upgraded to OSX 10.6.8 and now I cannot open or save PDF files from the internet using either Safari or Firefox. I get a dialogue box saying the QuickTime plugin has failed. Can anyone help?

    Is this what you downloaded: iTunes 10.7?
    When the update fails what if any error report do you get, specifically? Please do this before trying again:
    Repair the Hard Drive and Permissions
    Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
    If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.

  • InDesign CS3 crashes without error when opening any 2nd InDesign file

    Issue: InDesign CS3 crashes without error and remains resident in memory if we have an InDesign file open and attempt to open a second InDesign file.
    OS: Win XP SP2
    InDesign Version: 5.0.2
    Hardware: Dell Precision WorkStation T3400, 4 gigabytes of memory, Intel Core2 Quad processor Q6600
    Details: No messages in the event viewer about the problem. We renamed the InDesign Defaults and the InDesign Saved Data file. We removed Creative Suite, restarted and then reinstalled Creative Suite (I could not remove and reinstall InDesign individually). We have created a new Windows profile for this user. I have one computer having the trouble. Other InDesign installations are working fine. This computer has 559 files in C:\windows\fonts. Other people that are not having the problem have a larger number of fonts installed.
    The issue is not file specific. We are not running out of memory as I checked the task manager after the first InDesign document is open.
    Why is opening a second document different than opening the first document?

    Hello Peter and Josh,
    I'd just like to assert that I am having the exact same problem as Josh. I've spent the time to go through the steps listed above and have found the same results.
    The issue as we see it multiple times daily is as follows:
    (1) User opens File1 (everything works fine)
    (2) User goes to open File2 (via explorer or via file->open) or print File1
    (3) The User Interface for ID disappears (InDesign.exe still appears in Task Manager and is NOT listed as "Not Responding", ID does not appear in the Task Bar)
    (4) The only way to continue work is to End Task/End Process InDesign.exe and relaunch.
    No error messages appear, no error logs are created(that I can find). Non-related concerns caused us to upgrade this users PC. With a completely new install we are still having the problems. The systems are listed as follows:
    OS: Win XP SP2 (fully updated minus SP3)
    InDesign Version: 5.0.2
    Newest Hardware: Custom Built Computer, 4GB RAM installed (3.24 recognized by windows), Intel Core2 Quad processor Q6600 @ 2.4Ghz
    OS: Win XP SP2 (fully updated minus SP3)
    InDesign Version: 5.0.2
    Older Hardware: Custom Built Computer, Intel D945GTP Motherboard, 2GB RAM installed, Intel Pentium D processor @ 2.8Ghz
    Troubleshooting:
    (1) Alt+Space and M then using arrow keys moves every other window the user had opened other than In-Design. The user has two monitors. (a) 1280x1024 and (b) 1200x1600 (yes she uses the monitor rotated 90 degrees
    (2) Log files - Non exist in the C:\Program Files\Adobe\Adobe InDesign CS3 folder. I've also done a search across the entire hard drive for any "*.log" files, none of which were adobe related.
    (3) Default Printer - Changing the default printer to Adobe PDF is not really an option. I was able to convince the user to temporarily switch to a different networked printer and await the results (most likely today or tomorrow it should recreate)
    (4) /3GB switch - Getting that last 700 something MB of memory isn't an issue. I've run MemTest.exe on all the available system memory overnight in a "burn in" test. The system ran fine the sticks were nice and warm when I got in from all the hard work :)
    (5) Order of Opening - The problem repeates regardless of order. The trick seems to be opening File2 or printing File1 (I had the user only work on one file at a time (required her to close any open files before opening the next, that wasn't fun for my user but the system didn't crash on opening in this scenario, just on printing. Obviously not a permanent work around)
    Any help here would be much appreciated as this has been plaguing us for months now.

  • Kernel Upgrade Error :Cannot open or remove a file containing a running prg

    Hello All,
    I have installed ECC 6.0 on DB2 /AIX and now trying to apply Kernel Patch 75 but after Uncar of SAR files and moving the same to EXE (/sapmnt/PRD/exe) I am nota ble to copy few files, Follwoing error is coming.
    As a reuslt of this error Dispatcher is not starting in PRD.
    cp -p /sapinstdir/kernelpatch/indep/dw_gui.o /sapmnt/PRD/exe
    cp: /sapmnt/PRD/exe/dw_gui.o: Cannot open or remove a file containing a running program.
    cp -p /sapinstdir/kernelpatch/indep/libregex.o /sapmnt/PRD/exe
    cp: /sapmnt/PRD/exe/libregex.o: Cannot open or remove a file containing a running program.
    cp -p /sapinstdir/kernelpatch/db/dbdb6slib.o /sapmnt/PRD/exe
    cp: /sapmnt/PRD/exe/dbdb6slib.o: Cannot open or remove a file containing a running program.
    cp -p /sapinstdir/kernelpatch/indep/dw_stl.o /sapmnt/PRD/exe
    cp: /sapmnt/PRD/exe/dw_stl.o: Cannot open or remove a file containing a running program.
    cp -p /sapinstdir/kernelpatch/indep/dw_xml.o /sapmnt/PRD/exe
    cp: /sapmnt/PRD/exe/dw_xml.o: Cannot open or remove a file containing a running program.
    cp -p /sapinstdir/kernelpatch/indep/dw_xtc.o /sapmnt/PRD/exe
    cp: /sapmnt/PRD/exe/dw_xtc.o: Cannot open or remove a file containing a running program.
    Plesae help me to resolve this issue.
    Regards & Thanks,
    Ankita.

    Hi All,
    When a shared library with read-other permission is loaded, it remains loaded (and available) even if no processes are currently using it. This allows faster execution, but may result in a message like "Cannot open or remove a file containing a running program" on installs or rebuilds of application libraries.
    Refer to the man page for subroutine dlopen and command slibclean.
    Regards,
    Mukul SHarma

  • Mac OS 10.9.4 cannot open the NEF/RAW files from the new Nikon D810 Camera

    I have a new Nikon D810 camera. My new iMac cannot open the NEF/RAW files from it...Anyone have any knowledge of this?

    If you will take the time to send Apple feedback, they will add RAW support - when I got my Canon, it wasn't supported either. I filed feedback and, two months, later, there was an update which included my camera model.
    http://www.apple.com/feedback/macosx.html

  • Error Happened at RFC Server Cannot Open the Job Batch File.

    We have BW 7.0  and Data services 12.1. We are scheduling a Infopackage in BW that triggers a job in Dataservices server.
    We had checked the connection between Dataservices source system in BW and RFC server on Dataservices side and these connections are good. on the 3rd party sellections tab in infopackage we specify the batch file name that we exported in Dataservices server. When we execute the infopackage we get the following error.
    Error Happened at RFC Server Cannot Open the Job Batch File.
    This error started occuring from yesterday and prior to that it was working fine. We are not understanding what changed in the system to cause this error.
    Can anyone suggest any solutions for the above issue.
    Thanks,
    Naveen.

    I'm not sure what the root cause would be here. Is the file still available ? Did file permissions change ? ...
    But I wanted to point your attention to the fact that in Data Services/Data Integrator XI 3.2 (=12.2) we significantly enhanced the integration with BW. In XI 3.2, the RFC server is now integrated into the Data Services Management Console (so no need to start as a seperate executable) and you can start jobs from BW by just specifting the job's name in the repo (no need anymore to export execution commands to .bat files). So if upgrading to XI 3.2 is an option, things should go much smoother.
    More details on the wiki  : http://wiki.sdn.sap.com/wiki/display/BOBJ/Loading+BW
    Thanks,
    Ben.

  • Cannot open a downloaded pdf file..."The file couldn't be opened because it isn't in the correct format."

    I have had this problem several times lately: I cannot open a downloaded pdf file. The error message reads: "The file couldn't be opened because it isn't in the correct format." But, of course, it is a pdf file.

    My MacBook Pro (2.5 Ghz Intel Core i5) is running OS X 10.9.4. Here is what happens when reading an online user manual that I want to save to the Desktop and read later as a PDF file on my iPad or phone. With Safari I will select "Export As PDF" and the file shows up on the desktop. Even after multiple trials, there will be a dialogue box indicating the file cannot be opened. If I check the file info, the size is "zero." Trying to save the file as a pdf using the Print menu yields the same results. I have tried both of these methods using Preview, Adobe Reader, and PDF Pen Pro. This strange behavior also occurred several weeks ago and I finally abandoned the effort. But when the same thing happens twice, it becomes an issue that needs to be resolved.

  • I cannot open all email attachment files(pdf, doc, etc) in Mail on my New IPad.

    I cannot open all email attachment files(pdf, doc, etc) in Mail on my New IPad. I installed all viewer apps but I am not able to click and hold to select the option of viewer apps to open the files. I dont get the "open with" option when I click on the arrow in the menu bar. I can open attachment files on G-mail website from Safari though. It is really ridiculous that I cannot open the files from Apple Mail app! What's wrong with it!!

    We cannot possible know what's wrong with it. But we can offer suggestions that might help.
    Try resetting the iPad - its like rebooting a computer.
    Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
    This might help as well.
    You can try resetting all settings. Settings>General>Reset>Reset All Settings. You will have to enter all of your app preferences and device settings again

  • ORA-00210: cannot open the specified control file

    Hi all,
    Initially we faced the following error:
    ORA-00214: control file '+DBDG/dws/controlfile/current.256.638648487' version
    75647 inconsistent with file '+FLASHDG/dws/controlfile/current.256.638648489'
    version 75645
    Then the following action:
    RMAN> restore controlfile from autobackup;
    Starting restore at 05-DEC-07
    using target database control file instead of recovery catalog
    allocated channel: ORA_DISK_1
    channel ORA_DISK_1: sid=997 devtype=DISK
    recovery area destination: +flashdg
    database name (or database unique name) used for search: DWS
    channel ORA_DISK_1: autobackup found in the recovery area
    channel ORA_DISK_1: autobackup found: +flashdg/DWS/AUTOBACKUP/2007_12_04/s_640476511.697.640476513
    channel ORA_DISK_1: control file restore from autobackup complete
    output filename=+DBDG/dws/controlfile/current.256.638648487
    output filename=+FLASHDG/dws/controlfile/current.256.638648489
    Finished restore at 05-DEC-07
    RMAN> recover database;
    Starting recover at 05-DEC-07
    RMAN-00571: ===========================================================
    RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
    RMAN-00571: ===========================================================
    RMAN-03002: failure of recover command at 12/05/2007 15:16:10
    ORA-00210: cannot open the specified control file
    RMAN>
    Any idea why this is happening?
    Regards,
    Soma Sekhar Karri

    Something which you should have looked up prior to posting
    00210, 00000, "cannot open the specified controlfile"
    // *Cause:  Cannot open the controlfile.
    // *Action: Check to make sure the controlfile exists and is not locked by
    // some other program.
    Sybrand Bakker
    Senior Oracle DBA

  • Cannot open Canon CS2 Raw files in Bridges and Photoshop

    I cannot open Canon CS2 Raw files in Bridges and Photoshop. I have never been able to open it.

    Here are what cameras are supported by what version of the ACR plug-in and Lightroom:
    http://helpx.adobe.com/creative-suite/kb/camera-raw-plug-supported-cameras.html
    Here are what Adobe programs use what version of the ACR plug-in:
    http://helpx.adobe.com/x-productkb/global/camera-raw-compatible-applications.html

  • Had my Nikon D600 recently in for the updated service call. Camera works fine but Photoshop says it cannot open my RAW (NEF) files now? It worked fine before and I have done all my updates.

    Had my Nikon D600 recently in for the updated service call. Camera works fine but Photoshop says it cannot open my RAW (NEF) files now? It worked fine before and I have done all my updates.

    The only thing I can think of is if you got a replacement D610 as rumored here:
    http://nikonrumors.com/2014/01/27/nikon-is-replacing-some-d600-cameras-with-new-d610-model s.aspx/
    In that case, you would need the new version of Camera RAW or DNG converter as per Camera Raw plug-in | Supported cameras .
    The other thing to check is if the files open in the Nikon native ViewNX software. If they don't it's time to call the service center.

Maybe you are looking for