CS5 / ACR 6 Update Issue / ACR 7 D800 Support

I have been running the CS6 beta for a while now. I believe it may be causing and issue on the Mac when installed along side CS5. There are updates available based on my search for ACR6 as compared to my current version but Appliation manager indicates that CS5/ACR6 has no updates available. I noticed this when I received my D800 a few days ago. So...
1) There is a version of ACR 6 that supports the D800
2) Application Manager thinks that everthing is up to date.
3) ACR 7 does not seem to support the D800
What gives?
RB

Here is an explanation of the camera support in each version:
Pattie
FAQ: What cameras are supported in ACR 7.0 with Photoshop CS6?

Similar Messages

CS5 Full Version Update Issue

Originally, my CS5 was an update from CS4. When this CS5 was installed as an "update", it appeared to install properly. However, further updates to this install returned "error in downloading update", with a indication that "This serial number is not for a qualifying product." Adobe's solution was to issue me a "full version" serial number. CS5 s/n was deactivated, CS5 was uninstalled, PC was rebooted and the new "full version" was installed. Further updates still returned "serial number not for a qualifying product." Solution???

GARFERS,
Yes, I told you that they sent you here because they perceived your questions to be a technical question about an unsupported version. You need to present it as an installation issue, not a technical one.
Only CS6 and higher are still supported. You are three or four versions behind in the eyes of Adobe, and they only support technical issues in versions that are currently being sold. Yours is not a technical issue, but an installation issue.
The forums are precisely for technical issues in older versions. We are not here to teach Photoshop step by step as you insinuate. But we have now established yours is not a technical issue. We cannot help with Customer Service issues at all, as opposed to Adobe Tech Support issues.
Your screen shot DOES NOT show the destination I would be taken to if I follow ALL THE STEPS in my post.
This is where I just landed:
If this link doesn't work any longer, then Adobe has changed it and there's nothing I can do about it. Sorry.

CS5 Installation and Update issues

I am trying to re-install Photoshop CS5 onto my Win 7 Ultimate System. I know from previously installing it several years ago that there was an issue with installing it with Adobe Raeder on a system. Something to do with folder location issues. I have tried re-installing CS5 and it does install (apparently Reader issue solved(?)). Both 32bit and 64bit seem to install ok. I can open Photoshop and access the program.
Problem: When I try to do updates for the software, that are available, they download and then hang on install. The Adobe installer stops responding and nothing installs.
Could someone pleas assist me with this issue.
Thank You
System Information:
Win 7 Ultimate 64 bit, Service pack 1 and updates installed.
8 Gigs of system memory
1 Terabyte main drive - Photoshop location.
75 GB partion on seperate drive for Photoshop Cahe.
Nvidia GTX460 with 1GB memory
332.21 Nvidia WHQL driver

http://www.adobe.com/support/downloads/product.jsp?product=39&platform=Windows
Have you tried manually updating?

Adobe CS5 web Premiun - update issue

Unable to add msi update created by aamee to new installation package.
Initially, we created a cs5 msi package include updates (updates at 632mb) has been deployed by sccm to a classroom with 32 clients - Dreamweaver, Photoshop...etc works fine under student accounts.
Only the help F1 button does not work due to missing folder - which it works once you update the second time - try on a test machine.
Have created a msi update package at 3.2 GB of size - which we try to deploy by sccm which generates an error - cache is not big enough. !!!!!! - but didn't generate an error when we deploy cs5 package at 9.2 GB!!!!....
Now, we are trying to create a new cs5 package including the second updates at 3.2 GB. in the hope that it will install all together. When we can to the part that ask for updates we use the add update button - but generates an error - can't find the zip file....even know the package has been move to a zip file!!!!!!! Am I missing something?

You need an installer's forum... which this is not
How to Select a Forum http://forums.adobe.com/docs/DOC-1015

Opening Lightroom images in photoshop cs5 ACR

Is there any way to edit Lightroom 3.0 images in Photoshop Cs5 ACR? If I choose Edit in Photoshop the image goes directly to photoshop and bypasses ACR. I have tried creating an ACR option in Preferences but cant find the ACR file. Can anyone help?

No...and there is no reason to do so. Lightroom and Camera Raw share the exact same processing pipeline–assuming you are using the same rev version. The only way to take a raw image into Photoshop and use the Camera Raw dlog is to open as a Smart Object which will give you the SO version of Camera Raw inside the Photoshop document.

In Cs5, ACR I could select crop, right click and on custom, put in a size in millimetres or inches , the latest CC version seems to lack this. Any advice??

In Cs5, ACR I could select crop, right click and on custom, put in a size in millimetres or inches , the latest CC version seems to lack this. Any advice??

In Camera Raw? The Workflow options are now responsible for actual image size. See Julianne Kost's blog post. (There's a video that discusses this in detail at the beginning there as well.)

When opening a nikon raw file in cs5, ACR, the sky turns red, but is not red in thumbnail

when opening a nikon raw file in cs5, ACR, the sky turns red, but is not red in thumbnail

You most likely have the clipping indicator on that shows you blown out areas. Click the little triangle in the upper right of the histogram to turn it on or off.

Issue with Adobe Flash Professional CS5.5 Security Update 11.5.2

As part of my Adobe Design Premium CS5.5 suite, I have Flash CS5.5 version 11.5.1.349. It sorely needs updating per the security announcement page. Also Kaspersky IS keeps telling me it needs to be updated as a security vulnerability. I've tried everything. I download the 11.5.2 update from Adobe's security update page: www.adobe.com/support/flash/downloads.html#flashCS55
After it downloads I go through WinZip to open the zip exe file. It then gives me a message saying that Adobe Application Manager may be damaged and I should update/reinstall it. I've tried that.
I've tried opening the zip with Kaspersky security off.
I've tried updating through the AAM. (Always says no update available).
I've tried updating from within my Flash Pro application. (Always says no update available).
(Windows 7, 64-bit, using 32-bit browsers)
Really need someone's help on this, thanks.

Just to give some ease of mind, I noticed AAM also isn't telling me about this and I am also on a lower version.
I only use Microsoft Security Essentials (basically low interference) and I'm using flash CS5.5 with version 11.5.1.349..
I'm on Win7 64 so I jumped over to the page and grabbed the win .zip. Ran it, installed fine. Now:
As soon as I finished that I realized what my clients, family and friends constantly do. Do you see this screen?
The reason why you see this is you need to extract the files from the zip file.
Open the .zip, grab the single .exe AND the Payload folder and drag it somewhere (in the same place) on your computer. You can drag it to your desktop or anywhere you like, just make sure you grab both. Then run the AdobePatchInstaller.exe.
It's a very common mistake. You always need to extract all the files in a .zip because WinZip and Windows Explorer let you "preview" whats inside but you should never RUN files from that preview. Extract first, then run.

How download cs5 Camera raw update and how make Photoshop the default in the Bridge "open" menu?

Two problems which have defeated me.
First, I have a new Canon EOS 500D and need to download the recent (July 2010) CS5 Camera Raw update. However both of my computers freeze when I move from the Adobe Support web page to the Download web page. Is this a known problem? What to do about it? I am using CS 5 on a Windows 2007 XP computer.
Second, (probably related to the first) opening a file in Photoshop is not listed among Bridge's "OPEN AS" options. Also, the "OPEN" Default is "PAINT". How do I set Photoshop as the "OPEN" menu default?
Thanks for your suggestions. I am truly befuddled by these issues.
JackIsaac

Sounds like something is really wrong with your computer, and it isn't clear what, but if you're just having issues getting to the download link for ACR:
Here is the download page for ACR 6.1 update:
http://www.adobe.com/support/downloads/detail.jsp?ftpID=4728
Here is the download page for the CS5 12.0.1 update:
http://www.adobe.com/support/downloads/detail.jsp?ftpID=4733
If those links don't work, you can probably find the same updates on the FTP site, although some things here are more than a decade old:
ftp://ftp.adobe.com/pub/adobe/photoshop/
See if Bridge and ACR are any happier after installing these two updates. Make sure you run them as Administrator.
If those still don't work for you, try another browser, where Internet Explorer, Firefox, and Google Chrome should all work.
http://www.microsoft.com/ie
http://www.firefox.com/
http://www.google.com/chrome
There are numerous other browsers, as well, but they probably won't work if the above three don't.
Perhaps you either have a virus that you should scan for, or over-zealous internet-protection software that you could try disabling temporarily.
My favorite free virus/malware scanner is from www.MalwareBytes.com
The payfor version will automatically update itself and scan, but the free version works just as well except you have to manually update and scan.

Is there a CS5 camera raw update for the Nikon D600?

is there a CS5 camera raw update for the Nikon D600

Not as yet. ACR 7.2 does have preliminary support for D600. Output may change in final release of D600 support in upcoming ACR 7.3.
http://blogs.adobe.com/lightroomjournal/2012/10/camera-raw-7-2now-available.html
ACR 7.3 will have complete support for D600.
But, if you're on CS5, I'm sorry to break it you cannot upgrade to ACR 7.x...
You may want to consider upgrading to CS6 or Lightroom 4 (cheaper alternative) to get ACR 7.x support.
Or, use the DNG converter, make TIFFs and open them with PS.

CS5 Master Collection Update Fails Mac OS 10.9.2

Hello All,
I have a CS5 Master Collection Student Teacher Edition installed on a Mac Pro, which is licensed, registered, and works perfectly. I recently purchased a Mac Book Pro running OS 10.9.2 which I installed the entire Master Suite Collection on with no issues during the install. I use Photoshop mostly and have not had any issues using it over the past week since the installation. I noticed that the Adobe Application Manager Icon had 11 updates which I have tried to install multiple times over the past week and receive the below. If anyone could assist me I would be very appreciative. Thanks in advance for any assistance!
Adobe After Effects CS5 10.0.2 Update
There was an error downloading this update. Please quit and try again later.
Adobe Bridge CS5 4.0.5 Update
There was an error downloading this update. Please quit and try again later.
Adobe Extension Manager CS5 5.0 Update
There was an error downloading this update. Please quit and try again later.
Adobe Illustrator CS5 15.0.2 Update
There was an error downloading this update. Please quit and try again later.
Adobe Pixel Bender Toolkit 2.5 Update
There was an error downloading this update. Please quit and try again later.
Adobe Premiere Pro CS5 v5.0.4
There was an error downloading this update. Please quit and try again later.
Adobe® InDesign® CS5 7.0.4 update
There was an error downloading this update. Please quit and try again later.
Dreamweaver CS5 11.0.4 Updater
There was an error downloading this update. Please quit and try again later.
Fireworks CS5 11.0.2 Update
There was an error downloading this update. Please quit and try again later.
Photoshop 12.0.4 update for Photoshop CS5
There was an error downloading this update. Please quit and try again later.
Photoshop Camera Raw 6.7 Update
There was an error downloading this update. Please quit and try again later.

I found this in another thread. I think it will help you. You have to download the updates manually, but it works for me.
Adobe - Creative Suite : For Macintosh

FW CS5 - Severe Color Sample Issue

Howdy,
I know there is another thread on color variations when using the color sampler but I am having a severe issue with sampling colors. No matter what I color sample the color it gives back is way off. An example would be purple comes back as a light gray. To better illustrate, I have created a quick video that shows how bad/frustrating it is.
Here are my specs and what I have done so far...
Specs
MacBook Pro Retina (15")
Mac OSX Mountain Lion - 10.8.2
Adobe Fireworks CS5 - 11.0.1.7 (11.2)
What I have tried.
Snap to web safe is NOT checked.
Delete preferences (http://helpx.adobe.com/fireworks/kb/restore-preferences-fireworks-cs5.html)
Re-install
Still no luck. This doe not seem to be a common issue but I am wondering if this is an issue with CS5 and MacBook Pro Retina. Any thoughts on resolving?
Any help greatly appreciated. : )

Will they release an update to CS5 to address these issues? I'm not qualified to answer that, but the odds seem low. Nevertheless, you can report the issue(s) using Adobe's official bug report and feature request form:
https://www.adobe.com/cfusion/mmform/index.cfm?name=wishform
I like to include URLs to relevant forum posts in my bug reports, to provide additional information (like the video you've included) and reinforce that other users are also being affected, if applicable.
You could also pipe up about it on the Adobe Fireworks Facebook page, but you won't likely receive a response.
I wonder if there are any adjustments or accommodations that can be made at the computer- or OS-level that might help. (Something to do with the Retina aspect.) It's a long shot, but you might also try saving your Fireworks preferences and configuration files and then reinstalling Fireworks.

Adobe CS5 unable to update after reinstall on OS X Mavericks

I installed Adobe CS5 from DVD on a fresh OS X Mavericks, but now I'm unable to update with latest patches:
Via Adobe Application Manager:
- Application Version 1.0.0.67
- Error validating each downloaded files like:
2014-10-08T09:53:58: UCGetprogress : WARNING - Download failed as downloaded bob could not be validated.
2014-10-08T09:53:58: UCGetprogress : Updates download returning state for reffId = AdobeBridgeCS5-4.0/4.0.5
2014-10-08T09:53:58: UCGetprogress : Updates download returning state = 43
2014-10-08T09:53:58: UCGetprogress : Updates download returning outError = 207
2014-10-08T09:53:58: UCGetprogress : Updates download returning percent = 0

Hi,
Please follow the instructions mentioned in the knowledge base article
Troubleshoot update issues | CS5, CS5.5, CS6
Regards,
Devendra

Successfully using a Native Extension with Flash CS5.5 Pro, having issues

Hey all,
I'm trying to use a native extension due to an app rejection about the new storage guidelines. I'm hoping someone can help me figure out how to use a native extension from Flash CS5.5 and the adt command line utility (I've never used before).
Apples storage guidelines in 5.0.1 require files saved to Documents (and other places) to be marked with the icloud "do not back up" bit. I'm trying to use Adobe's IOS 5.0.1 data storage native extension to do that as I have file sharing enabled and my app downloads files I want the user to be able to copy to their desktop.
From the bits and fragments I'm reading all over, getting it to compile means using the command line adt tool (I've never used it before) because Flash Pro CS5.5 doesn't support native extensions. Also, this native extension requires a v14 SWF published (11.1) and CS5.5 only goes up to 10.2 (or higher if you install the players).
I edited the AiriPhone.xml file and pointed it to an AIR 3.1 airglobal.swc and I have AIR 3.1 overlayed in flash. I can't test AIR for iOS anymore after that change but I can get it to compile a SWF. The adt command line adt utility stopped complaining that my SWF version was 13 when it needed 14, so I assume this worked?
I am trying to compile a debug version so I can see trace statements to see if the native extension reports success on changing the bit. Here is my command line cobbled together from scraps of info on adobe.com and the -help data:
adt -package -target ipa-debug -connect 192.168.1.80 -provisioning-profile myApp.mobileprovision -storetype pkcs12 -keystore myApp.p12 myApp.ipa myApp-app.xml myApp.swf dat AppIconsForPublish Default-Landscape.png Default-LandscapeRight.png -extdir extensionDir
Before this iCloud change this app published directly from Flash Pro CS5.5 without any issues. I am only running into issues getting this app to work with this native extension and/or published correctly.
I am including the folders "dat" and "AppIconsForPublish" as well as splash screens (this app is landscape-only) as well as that extension in the folder extensionDir.
After putting in my password my app compiles into an IPA which I can drop into iTunes. It has the same general size as the IPA generated from Flash Pro. The icon is correct, etc.
When I sync this file, the progress bar goes across, I see it loading on my iPad and then once it goes to install I get a popup saying "iTunes Sync: 'myApp' failed to install."
Is there anything obvious wrong with my adt line? Has anyone else used this native extension? Ideas on what I can do to fix this?
No, unfortunately I did not build this with Flash Builder. I am an avid user of it now and this would be a moot point as it uses ANEs and changes SWF versions trivially. I have to get this to compile using Flash Pro CS5.5 though.
Any help is greatly appreciated!
edit:
Just FWIW, after I updated the .xml to use the latest AIR and such (so the version is 14) I removed the extension, exported purely from Flash Pro CS5.5 and the app works fine. As soon as I enable the <extension> in the XML I can no longer install the app. This just appears to be a noob adt publish issue.

My app downloads PDFs, movies and other information-esque files and saves them to the apps Documents folder so they can be retrieved via file sharing. These files not being in something purgable like /Library/Caches and not having the "do not back up" bit is why I was rejected.
update: It's definitely my command line building.. I took out the native extension completely and published from flash to an IPA and it works. I then run adt on the same SWF that just worked and it fails to install. So the install failing is my command line. I see this article and my command line is very similar. I'm really uncertain why it's failing.

Tried to download Adobe application mgr and got this Error Code: U43M1D207 ...it is not letting me update CS5 without this update..thank you, Lori

tried to download Adobe application mgr and got this Error Code: U43M1D207 ...it is not letting me update CS5 without this update..
thank you, Lori

I had issues trying to download updates to CS5 also, kept getting errors. Finally, deactivated, uninstalled, reinstalled, downloaded AAM again (took several tries), finally got it to install, then downloaded the updates one at a time. Again, took repeated tries, but finally got them to work. I am not sure what the issues were, but am glad i finally got the updates for CS5, RAW updates, and Bridge two work.

CS5 / ACR 6 Update Issue / ACR 7 D800 Support

Similar Messages

Maybe you are looking for