CS5 Activating loop - What file/folder needs to be deleted?

I freshly installed Mountain Lion on a blank HDD and then installed the CS5 Master Collection from Adobe DVDs.
Everything went fine.
Then I tried to launch AfterEffects and in this moment the whole system freezed and automaticly restarted.
After restart I tried again launcing After Effects and went into the activating process. I've entered my serial, it was confirmed, the dialog closed and nothing else happend.
Whenever I try to launch an Adobe App, I need to enter my serial, the dialog closes and nothing happens.
I have completly deinstalled and re-installed the whole package. But it's the same.
Is there any file in some hidden folder that must be deleted or something like this?
I am on OSX 10.8.5. / Mac Book Pro Mid 2010 i5 4GB
Thanks!

HI Charlie,
*"If Trash contains “Recovered Files”*
One or more Recovered Files folders may appear in your Trash after restarting your computer.
The recovered files are temporary files used by Mac OS X applications. Usually temporary files are deleted by an application when it no longer needs them. If an application quits unexpectedly, the temporary files may not be deleted by the application. When you restart your computer, Mac OS X moves these temporary files to the Trash.
You can retrieve useful files by dragging them out of the Trash. In most cases, however, the temporary files are not important and it is safe to empty your Trash. Check with the manufacturer of the application if you are not sure. If you still need help with this issue.....
You can't empty the Trash or move a file to the Trash in Mac OS X
Solving Trash Problems
How to Fix Stubborn Trash and Why it Won't Delete
Carolyn

Similar Messages

I just changed my number on line but my previous number is still showing on my phone and is active. What do I need to do?

I just changed my number on line but my previous number is still showing on my phone and is active. What do I need to do?
Thanks.

Alanf356,
You've reached the right place for help! Once the mobile number is changed, you must activate the new number on your phone. Depending on the model phone you have, you may have to simply reboot your device. If a 3G phone, you may dial *228 (send) and select option number one to activate.
Once completed dial #832 (send) to place a test call and ensure that new number is activated. Let us know if this helps.
EfrainM_VZW
Follow us on Twitter @VZWSupport

I had a Microsoft tech access my computer remotely to resolve issues with my hotmail acct. There were files that needed to be deleted and he also changed some settings. Later, when I tried to open InDesign I received the following error: AMT Subsystem

I had a Microsoft tech access my computer remotely to resolve issues with my hotmail acct. There were files that needed to be deleted and he also changed some settings.
Later, when I tried to open InDesign I received the following error:
AMT Subsystem Failure
The licensing subsystem has failed catastrophically. You must reinstall or call customer support.
I rebooted the computer and tried again:
Licensing for this product has stopped working.
You cannot use this product at this time. You must repair the problem by uninstalling and then reinstalling this product or contacting your IT administrator or Adobe customer support for help.
I can access Acrobat and MS Office programs, it's just the CS3 programs that I can't access. Can I uninstall and then reinstall CS3 without an access (un-lock) code?

Use the trackpad to scroll, thats what it was designed for. The scroll bars automatically disappear when not being used and will appear if you scroll up or down using the trackpad.
This is a user-to-user forum and most people will post on here if they have problems. You very rarely get people posting to say there update went smooth. The fact is the vast majority of Mountain Lion users will not be experiencing any major problems with the OS, or maybe with apps which are not compatible, but thats hardly Apple's fault if developers don't update their apps.

What file type needed to add behavior?

I have a logo created in Photoshop (I have the illustrator file as well), and I'm trying to animate it in Motion. However, when I add a behavior to the PSD file, nothing happens. What file types can be animated using behaviors in Motion?
Katie
PS-I know I could animate it using keyframes, but I'm looking to use the behaviors.

Euro spelling. It's the only thing people find interesting about Canadians.
No reason you can't put a Spin on a psd. Make sure you've assigned a spin rate to it. Look in the Inspector, click the BehavioUrs tab, and dial in a spin rate. See if that works. For Wriggle, make sure you apply to Properties (X,Y,Z, or combo of).

What files are needed for backup

Hello all,
Our database stopped working because of a mistake and we've lost lots of our control files and configuration files.
On the other hand there are 5 oracle_homes in our system! So we decided to uninstall Oracle and install a clean version and restore our data, tables, triggers, functions and ... to it.
We have many rman level 0 and 1 backups since 2 months ago and the size of each level 0 backup is around 1.8 GB.
But I am new to Oracle, so please let me know which files I need to keep from our current Oracle before uninstalling it and how I can restore backups to the new oracle (probably I will install it in a new drive not in D:/ again and with a new SID maybe). Also please let me know which version I should install? (Desktop Class or Server Class) We have some applications on our own laptops which connect to server and retrieve/insert data from/into oracle database on the server.
Our current database does not mount and open because of the problems I mentioned above.
Our server is: Windows Server 2008
Oracle Version: 11g
The scrips the we used to create rman backups are:
echo database backup, level 1
echo %DATE%
echo %TIME%
set datetimef=%date:~-4%_%date:~4,2%_%date:~7,2%_%time:~0,2%_%time:~3,2%_%time:~6,2%
echo %datetimef%
rman target / @F:\backup1.txt LOG F:\database-backup\rman-logs\%datetimef%.txt
copy F:\database-backup\rman-logs\%datetimef%.txt F:\database-backup\rman-logs\current-log.txt
and
echo database backup, level 0
echo %DATE%
echo %TIME%
set datetimef=%date:~-4%_%date:~4,2%_%date:~7,2%_%time:~0,2%_%time:~3,2%_%time:~6,2%
echo %datetimef%
rman target / @F:\backup0.txt LOG F:\database-backup\rman-logs\%datetimef%.txt
copy F:\database-backup\rman-logs\%datetimef%.txt F:\database-backup\rman-logs\current-log.txt
Thanks

RMAN's BACKUP command supports backing up the following types of files:
Database files, including datafiles, control files, and the server parameter file (SPFILE)
Archived redo logs
Other backups created by RMAN, including such as datafile and control file image copies, and backup sets containing SPFILEs, control files, datafiles and archived logs
Check
http://web.njit.edu/info/limpid/DOC/backup.102/b14192/bkup001.htm

Dreamweaver CS5 wont loop .swf file???

Hi there,
I am having a problem where i am trying to get a swf file to loop. I read on another thread that there is a bug in dreamweaver and although it automatically selects the loop button in the property inspector it does not add the code. But when i correct the code it still doesn't work! here is the code i am using:
<object classid="clsid:D27CDB6E-AE6D-11cf-96B8-444553540000" width="550" height="400" id="FlashID" title="openingsequence">
    <param name="movie" value="1.swf" />
    <param name="quality" value="high" />
    <param name="wmode" value="opaque" />
    <param name="swfversion" value="6.0.65.0" />
    
    <param name="expressinstall" value="Scripts/expressInstall.swf" />
    <param name="LOOP" value="true" />
    
    
    <object type="application/x-shockwave-flash" data="1.swf" width="550" height="400">
      
      <param name="quality" value="high" />
      <param name="wmode" value="opaque" />
      <param name="swfversion" value="6.0.65.0" />
      <param name="expressinstall" value="Scripts/expressInstall.swf" />
      <param name="LOOP" value="true" />
      
      <div>
        <h4>Content on this page requires a newer version of Adobe Flash Player.</h4>
        <p><a href="http://www.adobe.com/go/getflashplayer"><img src="http://www.adobe.com/images/shared/download_buttons/get_flash_player.gif" alt="Get Adobe Flash player" width="112" height="33" /></a></p>
      </div>
      
    </object>
    
</object>
I have also read that it could be because the code for the .fla file has a <stop/> value at the end instead of the code to make it loop. I made the swf file from an mp4 in flash so ive never had the original .fla file. I have tried using a swf decompiler to get the fla file but it doesnt seem to have worked but this is a side issue...
I really just want to figure out how to get dreamweaver to loop my swf file.
Can someone please help me, ive spent all day trying to solve this!
thanks,
Matt

Hi
You wrote -
I made the swf file from an mp4 in flash so ive never had the original
.fla file. I have tried using a swf decompiler to get the fla file but
it doesnt seem to have worked but this is a side issue...
First welcome to the forum.
Unfortunately without being able to edit the stop() function out of the fla file, your swf will not loop.
You could use the html5 video element for your mp4 and if you have the original video file convert it to other formats for use in the html5 video, and then use the swf file as the fall back, this would allow your video to loop in those browsers that support this.
There are also 3rd party players available that will allow the swf to loop without editing but these will only work on windows.
PZ

IMovie "All Events" folder needs to be deleted.

There is a folder in iMovie named "All Events" and it seems to contain all the video clips I've used in videos, but I have deleted them from my computer and when I skim over the folder I can see screen grabs from the clips, and it shows that it has 35gbts worth of footage which is taking up too much space. how do I get rid of it or clean it out so I can make space and have less lag?

Hello mariodez,
Thanks for using Apple Support Communities.
See the following information on how to delete content from your iMovie Library.
Delete movies, trailers, clips, and events
You can delete unwanted movies, trailers, and clips from an event, and you can delete an entire event in order to free up space on your hard disk.
If you don’t see the Libraries list, click the Show button on the left side of the toolbar.
In the Libraries list, select the event you want to delete, or select the event that contains the items you want to delete.
In the browser, select the movies, trailers, or clips you want to delete.Tip: To select multiple items, hold down the Command key as you click the items you want to select, or drag a selection rectangle around the items.
Choose File > Move to Trash.If a clip you’re deleting is in use anywhere else in your library, the clip is not deleted.
Note: Selecting a clip and pressing Delete marks it as rejected. For more information, see Mark clips as favorite or rejected.
Organize the library
http://help.apple.com/imovie/mac/10.0/#mov1d890f00b
Take care,
Alex H.

What project files are needed for development?

Hello,
I have a new WebHelp project that is nearing completion. Our
Web developers are anxious to build the help into their
application, but I'm not sure what files they need or do not need?
Do I just turn over all files to them, or some subset?
Thanks!
Charlie

Hi Charlie
Assuming you are using RoboHelp HTML properly with all files
located on your C drive, you should notice that inside your project
folder are some sub folders. One should be named
!SSL!. Inside THAT folder should be a folder named
WebHelp. You need to supply *ALL* the files (and folders)
that you find inside this folder.
Hopefully this helps... Rick

What files do i need to download?

I'm trying to figure out what files I need to download. I eventually want to install everything I possibly can that's available from Oracle, but I'm trying to tacle just the Database + Forms + Reports right now since that's what my college professor says I need. She also mentioned that I need a client.
I don't know why ever I would need a client to go with a server... aren't servers just big happy standalong thingers? (just kidding)
Anyway, I'm doing this under Red Hat Linux 9. I don't want to mess with personal anything... I want the full blown software. So I download the "Oracle9i Database Release 2 Enterprise/Standard Edition for Linux/IA64, Release 2 (v9.2.0.2)"
Doesn't sound like I'm getting a client with that. So where do I download the client? I see a link there that specifically says it's a client, but it's only for windows. I have windows running under win4lin, but I really really HATE to use windows. I will avoid it at all costs. Is there a client I can get for Linux? I can't tell, but it would make sense to me that it would be in with the Designer download. I'm guessing that just because the Designer is... well... the Designer. And I figure you're going to need a client to design things...
Thanks for the help, if I get any.

First of all you have downloaded the wrong software. IA64 is 64 bit. If you're running on regular Intel hardware you'll need 32 bit Oracle software.
Also, if you install the database software you also can install the client software from the same set of files/cds. Install the database first, and then do a separate client installation. Select "programmer" and that will give you things like OCI and Pro*C.
I don't know anything about Designer, but it is a separate product and has to be installed in a separate ORACLE_HOME directory. I don't know if that is available for Linux.
Lastly there are a lot of problems with installing Oracle on RedHat 9. Oracle is only certifying now RedHatAS 2.1 and I think RHEL 3.0. Here is an excellent web site (you'll need it) that has workarounds and tips for all the problems you'll encounter installing Oracle on Red Hat:
www.puschitz.com

Crystal Reports Server XI - what files need to be backed up?

I don't want to set up a fail over cluster which there seems to be plenty of information on.
All I want to do is identify what files I need to backup incase I need to do a restore.
We use Tivoli Storage Manageru2019s backup and recovery solution for backups
Any help would be appreciated...

Depends on the complexity of your deployment. Basically, your CMS DB and the FileStore directory are the only objects outside of the application itself that need to be backed up. The CMS DB contains all your security and links to reports, while the FileStore contains all the reports and instances themselves. You want to have the backups of these synchronized, so that you limit the number of report links that point to nothing, or have reports in your FileStore that have no links to them.
Other than that, if you have made modifications to your deployment to allow for LDAP/AD authentication, modification to server properties to adjust timeouts or orther parameters, etc you should have these documented so that they can be reaccomplished.
If you have the CMS DB and the FileStore, you can reinstall, point to the CMS DB, point to the FileStore, and be back up and running.
Those Tivoli backups should not be run on the entire installation volume while the system is up and processing scheduled reports. You will see the backup program report errors, as temp files are being created/destroyed, and executables will be locked. It may still run successfully with errors, but it may also cause issues with the report processing and stability of your system. Depends on how busy it is - it could still run successfully if it's quiet. Recommended best practice is to stop services, backup, start services.

What FILE do I need again? (moving WEB SITE from one COMPUTER to another)

Can someone tell me what file I need?
I can't remember and what to do. It's my understanding that all you have to do is move the file to the same location on the new computer and it should open in the new location, correct?
You would think that iWeb would upload this to the web for easy access and ability to edit from any computer.
Thanks.
PS. Does anyone think iWEB will mature to a level somewhat more experienced, ala dream weaver, at least some more in-depth tools? I would love to see Apple develop iWeb more as well as a flash type of program as only Apple could create a program that is very complicated (FLASH) and make it somewhat easy. There are others out there for the PC, but none for the mac. I also think if Apple released a deep yet easy to learn flash tool that they would make some deep in-roads to developers. For the PC users, check out SWISH, and at one time, Adobe had a pretty good program too, can't remember what it was called, but they stopped developing that years ago.

You need ~/Library/Application Support/iWeb/Domain.sites2, where ~ is the item in the Finder's sidebar with the house icon. It's a package, not a file.
(38910)

I have iOS 5 and I have purchased iTunes match, but the iCloud icon in iPad settings is not activated what do I need to do to get it to operate

I have purchased iTunes match and iCloud icon appears in my ipad2 settings, but it is not activated. What do I need to do to get it to operate?

On the MBP, in iTunes, switch to Song view and enable the iCloud Status column by pulling down View > View options and selecting the option for "iCloud Status." Close the small window. Look for any tracks that have a status of "waiting." If you see several of them disable iTunes Match while holding down the Option key. Quit iTunes, wait a few seconds, then open it again and turn iTM back on. Let it compelete the scan. Wait until all tracks that are "waiting" have a status of either "matched" or "uploaded."
On the iPad, turn off iTunes Match then launch the Music app and let the contents clear out. Power cycle the iPad for good measure, then re-enable the service once all the tracks in iTunes have been processed.

HT1414 When I hit restore a file menu from my computer pops up and I am not sure what file to put in to get my iphone to restore from. I don't get the box that says are you sure you want to restore. So how do I get it to restore so I can see if this fix

I got a "new" iphone from the Apple store when my dog bit the phone and cracked the front. This new phone will not play any music, ie no sound will come out. I can watch videos with sounds but no music from any of my playlists. I checked with Apple and was told to try to restore my iphone. I did all the necessary prep work like backing up and syncing and then hit the restore button on the iTunes page. A file menu icon popped up with a blank in it and I do not know what file I need to put in the window as where it needs to find a file to restore the phone. I never got a message that said are you sure you want to restore the phone. I need some help if anyone knows how to do this or should I just go back to the Apple store (which is over an hour away)? Thanks

I am syncing my iphone to my iTunes account and then I do a backup and also making sure all updates are current. Then by going to the my phone and then going to the right and selecting the restore my iphone.
Here is a picture of what I get

View Windows File Folder/Location in ITunes

Is there any way to see what file folder your music is in from iTunes (in the library)? I have some folders for very specific things and want to make playlists out of them, but have to manually pick out each and every one since I can't seem to sort the library by file location...
Thanks for any help. This is actually a make-or-break for my next player purchase! Acey

Get info (File menu) on any track will tell you where the actual files are stored. But I don't see how that would help much in making a playlist. You are correct that you cannot sort nor search iTunes by file location, so you'll still have to go through each item one by one, if you want to build a playlist solely based on where the track is stored on the hard drive.
Perhaps, though, you could use a tag editor to put a tag into the Comments or Grouping for each track in a given folder. Then you could use a Smart Playlist to search for those tags. Someone else here may be able to provide more information about that possibility.
Regards.

What files do I put on a remote server?

This is a basic general question. I am a beginner with
dynamic web pages. I have made a login form using Dreamweaver CS4,
php, mysql. It works fine on my computer (Mac intel based), but I
don't know what files I need to upload to the remote server I use.
I used MAMP to set this up.

You need to upload the php, html, and css files.
You need to create the mysql database on the remote server
using the same
name and table names as you did locally
a MySQL database is not a single file you upload, it is an
application
running on the server. Depending on your hosting, you will
have access to it
using a control panel, CPanel, command line, or phpmyadmin.
Once into
whatever access method you have, there will be options to
import things once
the db is created.

CS5 Activating loop - What file/folder needs to be deleted?

Similar Messages

Maybe you are looking for