CS5 adding repeat frame

I've exported QuickTime files from Final Cut Pro for VFX artist using CS5. The file format is Uncompressed 10-bit 4:2:2 23.976. When the files are handled in CS5 at 8bit they are frame accurate, however when the comp is switched to 16bit or 32bit the first frame is repeated (thus causing the comp to render out a frame short at the tail). I tried Uncompressed 8-bit as well and same issue. I tested ProRes and don't get the repeat frame at any bit depth. As a note using AJA kona 3 driver 8.

I have a problem...
In my Report Builder 6.0.8.11.3 there is no "Logical page size" property.

Similar Messages

  • Premiere adding repeated frames when overwriting with transitions

    Hi,
    Having a bit of a problem (software bug?). I work with groups of clips on a timeline with 5 clips for each group (Intro / segment1 / segment2 / segment3 / outtro) and each week we replace 1 or 2 of each segment so we don't have to do a complete re-edit each week (for example one week we may replace segnemt 2 in each group for the new week and keep 1 & 3 intact)
    I'm replacing clips on a timeline using an Overwrite Edit while keeping the transitions from the previous clips intact (cross dissolve with center alignment). The new clip is IDENTICAL in length to the previous clip I'm replacing (so "handels" are already there) however Premiere is adding repeated frames to the head of the new clip (so the incoming image freezes up until half way thorugh the transition). One way I found to fix this is using the SLIP tool to drag the new clip to the left and line up the in point of the new clip to where it should be. I'd use this as a fix, however I'm replacing over 300 clips in some instances and it's just not time efficient to slip and tweak each one.
    I hope this makes sense.
    Anyways, has anyone else encountered this? Is it a bug? Any workarounds?
    Thanks,
    Phil

    I hear ya, unfortunately in our case we actually don't have a choice deciding where each scene begins and ends because the first frame of the next clip is the next frame in the animation sequence (we have a tile wall floating with moving images over so the flow between the two clips needs to be seemless.) We use a cross dissolve where the overlapping frames match each other during the transition, so the 5 segments stitched together look like one consistant flow). We do this so we can swap out different content segments each week so we can quickly update rather than spending hours re-building the entire segment each week. If you've ever seen the FirstLook conclusion in the movie theaters before the movie starts, that's what I do   Sounds like Ann's solution will work for us in this case.
    Cheers!
    Phil

  • Adding a field to a Repeating Frame in Oracle Reports

    Hi,
    I have a report that has 4 repeating frames. At the lowest level (Level 4), I have several fields to do with school swimming sessions - Session Start Time, End Time etc..
    I want to add a field to that frame for Session Notes, and have tried doing this by going to the Layout Model, selecting an existing field (e.g. Start Time) and doing a copy & paste into the Layout Model, with a view to then renaming it and changing the Source to Session Notes.
    However, each time the new field is being created at School level (this is the Level 3 repeating frame) - obviously then when I attach the Session level column as the source for my new field, I get a field referenced "at a frequency below its group" message.
    Any idea how I create a field in the Level 4 group?
    Many thanks,
    Keith.
    PS I am using Oracle Reports v6

    Before adding the items for the level4,create a repeating frame and put the right source to the repeating frame.
    After doing this,put the items on this frame,and they will be level4 items.
    It should work
    aguero

  • Adding a field to Repeating frame

    HI
    I am trying to add a field to repeating frame.When I select the text box from the tool pallette then I drag or click on the repeating frame,it creates the field.
    But when I am trying to adjust it , it doesnot fit into the repeating frame.Then I copied over the existing fields inside and created a duplicate.But that still doesnot fit into repeating frame.
    Thanks in advance for your suggestion.

    Hello,
    ..Not sure to have understood what you mean by "But that still doesnot fit into repeating frame."
    You can test to deactivate the Flex mode (Click on the icon "Flex Off" )
    and uncheck the option "Snap to grid" in the menu View
    Regards

  • How can I add a field to a Repeating Frame in the body of a 9i Report

    How can I add a field to a Repeating Frame in the body of an Oracle 9i Report whose source is in a higher group?
    I want to change an Oracle 9i report. The report has no header or trailer but only a body. The body has the parent frame fields & a repeating frame with four fields, A, B, C & D. They all seem to be in one group. I want to add another field E to the repeating frame whose source is from the 'header'.
    I added the field & created a boiler plate & then added the new field, E to the original group A, B, C & D. In the Property Inspector for the field, I pointed the source to the source column in the main query. However, when I run the report, I receive the error "Invalid body size". Some notes on Metalink indicate that this could be due to margins being out of the printable area.
    Moreover, after making the changes & after having unsuccessfully run the report, when I try to open the Page Layout for the report, I get no details.
    Thanks,

    Hi,
    i also got same query can u pls tell me elaborately, if u can can u pls send some code.
    Thanks & Regards
    Jagadeeshwar.B

  • Repeated frames when time remapping AVCHD clips in AE

    I will try to explain the best I can. Keep in mind I am a novice and by no means highly technical. First some background: I edit sports video for college bound athletes. I put together highlight videos for them. When I am filming I start/stop the camera at the beginning/end of a play so I can easily identify/edit "clips". I have imported 10 AVCHD "clips" from my Sony HDR-SR11 to a Premiere Pro CS4 project. I am using the "AVCHD 1080i anamorphic/29.97fps" sequence setting as my output for this project will be a 1440x1080 mepeg2 file. So I get my clips in the timeline add some transitions, no major edits, render the work area and playback. Everything looks fine, all clips play smooth. Now here's the rub. I want to freeze play, highlight an athlete then continue play. To do this I am using AFTER EFFECTS (NOTE I have done this with HDV footage off my Canon HV20 camera with no problems) so anyway with the new CS4 edition I can right click on a clip in my timeline and choose "replace with after effects composition"....I do and the clip migrates to AE into a a composition ready for me to work my magic. So my method for freezing play is select the "clip" in the composition, Ctrl-Alt-T for time remapping. I add 5 seconds to the duration of the composition since I am going to add time when I freeze the clip. I find the point in the clip where I want to freeze it. I place a "time remap" keyframe at that point. I then drag my mouse to highlight the keyframe I just placed and the keyframe at the end of the clip......I drag them to the right 2 seconds, then cut/paste the keyframe I added which is placed by the CTI (which is still at the original point). Now I have a 2 second freeze in play. I add a white solid and do some masking to highlight the athlete during that freeze. And that's it.....I press "O" then "N" to define the work area then I choose "trim comp to work area" from the composition menu. I repeat this process to all my clips and here is where I see the problem. I go back to my timeline in PP and I play the clips......I see my freeze/highlight edits from AE just fine but on SOME clips......2 out of 5 for example.....I get jittery playback. So I decided to scrub thru the clip frame by frame to see what is going on. So within 29 frames this is what I see. Girl is getting ready to serve a volleyball....Frame 1-15....she steps forward to serve THEN at frame 18 she pops back to the starting point...IT LOOKS LIKE FRAMES 1-12 ARE BEING REPEATED. I scrub the rest of the clip and this happens at random points....a small block of frames gets repeated throughout the clip which in the end looks like "jitter" or "jumpy" motion. I follow the same workflow in AE for each clip BUT this "jitter" does not happen on every clip...only some. So is my workflow at fault or is AE/PP/Adobe still buggy when it comes to working with AVCHD codec?? Anyone else experience this, if so do you have a fix?

    I haven't tested your theory yet Andrew but I did do this. In trying to track down exactly where these repeated frames are occurring. In AE I redid one clip that was repeating frames. I went frame by frame in AE and see no repeated frames. These changes should occur automatically in PP since the AE comp is still dynamically linked to my PP timeline. So I scrubbed the "source" (AE comp) file from the PP project panel frame by frame. And low and behold there are repeated frames, so it appears the problem is the handoff from AE to PP Sooooooo, ok I deleted the source file in the PP project panel and reimport it via dynamic link. Open the clip in the source monitor and yes...repeated frames at same point....recheck the comp in AE....no repeated frames. Delete the clip from PP project panel and this time import the clip directly instead of dynamic link.....repeated frames still there. So how about rendering the clip in AE the old fashion way then import to PP. AE Render Queue best settings - lossless.....blah blah blah. I ended up with an .avi file with no repeated frames. So to me the problem is the handoff between AE & PP. So rendering my AVCHD comps in AE first is my work around for now. Andrew...thanks! I will try your theory of converting the clip prior to the comp asap...right now I am trying to meet a deadline.

  • How Do I add new fields to Repeating Frames in existing Report

    Hi,
    How do I add new fields to Repeating Frames in existing Report. The Report has 2 GRPFR, 1 HDR and 2 Repeating Frames. I would like to add a new field(column) to inner most repeating frame. I added the new golumn to QUERY and GROUPs in Data Model. After adding the new column to inner most Repeating Frame in Layout Model, the Layout model is losing all other frame and it is showing only the modified one.
    How do I add new column to repeating frames without disturbeing other frames.
    Any hellp will be appreciated!!!!!!!!!!!.
    I am using Oracle Reports 6i.
    Thanks,
    Ravi.

    you must work in your layour editor
    expand your repeating frames do it more big
    for add your new items or field. after you inserted or add, can you put more little your repeating.
    too can you to do one copy of one field in your repeating frame and assign it in his source your new item in your data model.
    normally i begin with the principal frame and go one by one internally.

  • Headers/labels in repeating frames

    Hello,
    I am able to print a repeating frame accross/down, but I would like to print column headers for them, as well as a side header (used to describe the whole set of data in the accross/down frame).
    In any case, I just want the column headers once at the top of each column. Plus, if no records exist, I don't want ANY of the headers, (side or top) to print.
    Simplified example below.
    Period Description Period Description Period Description
    Classes 01 Math 02 English 03 Science
    Added: 04 Geography

    You're really describing a matrix report with column & row labels. It's easiest just to modify the data model to convert your data into a matrix rather than trying to create a matrix using across/down repeating frames yourself.
    To stop everything printing, place a frame with a format trigger against it which returns "false" if no rows are returned.

  • Repeating frame does not shift upwards !

    Hi , i have a simple report which is built in a parent-childern pattern .
    the layout consists of parent repeating frame and inside it a child repeating frame.
    the parent and the child frames has a print on the first of the enclosing object property set.
    in the first page the parent and the child frame are printed together well.
    the outcome in the second page should be 2 child frame printed one after the other since
    the parent frame is not printed and therfore should shift the first child frame upwards taking it's place
    and by that leaving space to print the one after it .
    instead only one child frame is printed in the same location as the previous one.
    i have tried every possible combination of values in all of the properties of each repeating frame ,
    including adding and removing regular frame that encloses the repeating frames .
    nothing help.
    it is a very important report and need help urgently.
    Please help.
    Thanks you.

    probably a bug in repors .
    i just resized the whole report and it worked .
    thank you for your replay.

  • Repeating Frame leaves blank area on next page before record

    I have a report with multiple repeating frames. Near the bottom of the first page the last repeating frame starts to print. If there are too many records to fit on the first page, they show up on subsequent pages. That is OK. However, on the 2nd, 3rd, etc. pages the records are part way down the page with much blank space between them and the header above.
    I would like the records to start at the top of the next page just beneath the header. Also, because of another repeating frame before this one, I can't even be sure if this particular frame will always start printing on the first page.
    I have tried properties such as page break, print object on, page protect, etc. They hve not resolved this issue to date.
    Thanks in advance from a beginner.
    DT

    hello david
    in this case you must consider what is printed on next pages ... for this i recomend newbie to colorize each frame and repeating frame to see what is there. from your describtion is possible that there are some objects on your frame with print condition set only to first page ... so they is not displayed on second, ... pages - this could happen f.e. with added descriptions, colmn heading, ... so my advice is to look why the space is there and then (maybe) make a correction ...
    hth
    petr valouch, brainbench mvp for oracle rograming, http://www.brainbench.com

  • Page Break Before & Repeating Frame (Reports 10G - Windows)

    Hi to all,
    I have to give page break when a condition met in a tabular report.Like it s advised I tried some layout objects with page break before property true and wrote their return code true if this criteria occurs. But whatever I tried, I couldnt get my desired output.It gives page break but repeats a blank repeating frame in the next page but only with that object I added later with page break property. Anybody have an idea ?
    Thanks...

    Hi,
    sounds like there's no child object for your object with page break before. This property has only impact of the object itself and all it's child objects. An object is a child object of another object, if the position of this objects has impact of the own position. This is only the case, if the parent object is vertical expandable and the child object is horizontally overlapping the virtual expand-region, or the child-object is anchored to the parent object.
    So if you have this layout:
    blue box fixed size
    red box fixed size
    yellow box fixed size
    and you set page break before to the red box, you will get:
    blue box
    yellow box
    -- page break
    red box
    If the red box is verical expandable you will get:
    blue box
    --page break*
    red box
    yellow box
    So in your tabluar report your field of the report should be in a frame and this frame should be child object of your new object which must be vertical expandable or anchor them together.
    Regards
    Rainer

  • Repeating frame position problem!

    HI!
    This is bothering me two days and i can't figure it out.
    I have 4 repeaitng frame hierarchly:
    R_frame_1
    R_frame_2
    R_frame_3
    R_frame_4
    4 th repeating frame is a problem because on the first page is everything ok
    data1 data2 data3 data4
    but on second page where data is continued it goes left out of the paper
    data 3 data4
    When on second page repeating frame goes from the begining then is again ok.
    Example
    Page1
    SOME TITLE
    data1 data2 data3 data4
    data1 data2 data3 data4
    Page 2
    data 3 data4 <---- WHY?
    SOME TITLE
    data1 data2 data3 data4
    data1 data2 data3 data4

    Thank a lot dear :)
    By the way I have Frame B which is inside Frame A, when I add a new column on B it goes to A. What trick should I do here please.
    Maybe I adding is not the proper way? How do I associate a column to which frame does it belong? I can not see it on property pallette.
    Thanks again

  • 60fps Video showing Jittery/repeat Frames?

    I have 59.94fps video in a 59.94fps comp, the video is 720p and is recorded from a HD Capture card. When I put the clip into After effects cs5, I get a strange jittery, repeat frame effect. It is only in a couple parts of the clip, but the strange thing is, in anyother video player/ editing software, it is fine, no repeat.
    Basically what im getting is this, every so often, there is a jitter in the video, like so, it goes Frame 1-2-3-2-3-4-5-4-5-6-7-6-7-8-9. Its very annoying and renders the video usless. The video is .mp4
    Thanks in advance for the help!
    my specs are, Windows 7, AE CS5, ATI radeon HD GPU, 6GB RAM.

    Here is Captured file info:
    Format                           : MPEG-4
    Format profile                   : 3GPP Media Release 4
    Codec ID                         : 3gp4
    File size                        : 974 MiB
    Duration                         : 10mn 20s
    Overall bit rate                 : 13.2 Mbps
    Video
    ID                               : 1
    Format                           : AVC
    Format/Info                      : Advanced Video Codec
    Format profile                   : [email protected]
    Format settings, CABAC           : Yes
    Format settings, ReFrames        : 4 frames
    Format settings, GOP             : M=4, N=32
    Codec ID                         : avc1
    Codec ID/Info                    : Advanced Video Coding
    Duration                         : 10mn 20s
    Bit rate mode                    : Variable
    Bit rate                         : 12.9 Mbps
    Maximum bit rate                 : 20.0 Mbps
    Width                            : 1 280 pixels
    Height                           : 720 pixels
    Display aspect ratio             : 16:9
    Frame rate mode                  : Variable
    Frame rate                       : 59.940 fps
    Minimum frame rate               : 59.887 fps
    Maximum frame rate               : 60.006 fps
    Color space                      : YUV
    Chroma subsampling               : 4:2:0
    Bit depth                        : 8 bits
    Scan type                        : Progressive
    Bits/(Pixel*Frame)               : 0.234
    Stream size                      : 958 MiB (98%)

  • How to get the values from repeated frame?.

    Hi
    how to get the values from repeated frame?. i have to disply the first 3 digits in another place in my report.
    i have field empno in repeated frame and i want to disply first 3 digits in another place in the same report.
    thanks

    How often do you need to display it? It sounds like you might want to base a summary on that formula with a function of first or last. If it's a per page basis, it can be a page level summary. If it's at a higher level repeating frame, then you can create the summary at that level. I'd suggest taking a look at the online help for summaries using the first/last functions.
    Hope that helps,
    Toby

  • How to make an order on repeating frame using Formula Column?

    Hi All,
    I have a repeating frame dependent on some query, how to make an order on this repeating frame using a formula column defined in its group and dependet on values from the query?
    Note: I'm using Reports 6i

    Place your formula column at the top of the itm group and set the BREAK_ORDER to assc.. or desc...
    Hope this helps
    Hamid
    if problem solved, close the thread.

Maybe you are looking for