CS5 Bridge and Permission Problems

Hello there;
I just started experiencing a problem with Adobe Bridge. I am (and have been) using CS5 with no problems at all until just recently. Adobe Bridge does not seem to delete image files or rename image files for some strange reason. I get a message that says... "The file cannot be renamed because you do not have sufficient permissions or it is in use"!!! I have never experienced this since I installed CS5. I know the file(s) is (are) NOT in use. I am not able to delete or rename. Not sure if any other Bridge functions will suffer through the same problem as well.
Anyone experienced this issue before? Any suggestions to resolve it? Many thanks.

Hi Curt;
Many thanks for your response.
When I view the thumbnail images in Bridge, there is NO padlock symbol at all. Since I shoot everything in RAW, Explorer and Windows do not display the image itself, but an icon representing the .CR2 file (I shoot Canon). I have also tried the right-click to check the Properties of the files, and there is NO check mark for "read only". I am still at a loss. I sincerely appreciate your help if you can think of anything else.

Similar Messages

CS5 Bridge and Elements

Hello,
I happen to have Adobe Photoshop Elements 8.0 Plus and Adobe CS5 installed on my desktop.Both programs work fine when using one or the other.My problem is if I have CS5 Bridge open and highlight a photo that I want to open (right click open or top file menu)the photo opens in Elements 8 Edit.I would think it should open Photoshop 5,but can't seem to find where to change it from.I keep Elements installed because its handleing the photo backups right now.Any suggestions?I'm missing something I'm sure.Thanks.

My problem is if I have CS5 Bridge open and highlight a photo that I want to open (right click open or top file menu)the photo opens in Elements 8 Edit.
Go to Bridge edit/preferences/file type associations and change the defalult program for extenstion to CS5.
And if you have keywords in Elements they can be read in Bridge, you just have to find the option to write files to metadata.

Updates for CS5 bridge and raw

Been using CS5 and have tried to add updates to bridge and/or raw and each time it says to close bridge, to proceed. I closed bridge and still un able to proceed to add updates. What an I missing? Thanks for any help, Rick

Check your Task Manager, Bridge may be running in the background.Go to your Task Manager, then to Processes and look for Bridge.
You may also have Bridge starting automatically when Windows starts so you may want to deactivate that.

Account rights and Permission problems!

I have since few day´s MacKeeper installed, but even when I restart my Mac. I can´t use Internetsecurity because of permission problems I have no access to helperlaunch. My Account has Admin rights but helperlaunch get´s the information that I have not the rights to access. When I get a new Account with the same rights it will work. How can I change this at my Original Account?

Open disk utility and repair permissions on your boot volume.
Then, follow this to reset your user permissions:
Turn on the Mac whilst holding down cmd + R. You can let go once you see a spinning dial. You will then see the ”Mac OS X Utilities” screen.
On the top menu, click Utilities, then click Terminal.
Type resetpassword and press Enter.
Click on your main hard drive.
In the dropdown box under “Select the user account” make sure to select your username.
Underneath where it says “Reset Home Directory Permissions and ACLs”, click the Reset button.
Press cmd + Q to quit the Reset Password application.
Press cmd + Q again to quit the Terminal.
Press cmd + Q one more time and click Restart.

Adobe After Effects CS5 Crash and compatibility problems with Windows 7 64-bit

Hello,
I get a lot of crashes of After Effects CS5. I get the message thar Monitor Kernel program stopped responding and recovered.
I also did a compatibility test and found that After Effects CS5 is not compatible with Windows 7 Premium 64-bit.
Could you suggest a solution please?
Thank you
Giannis Stravolaimos

I solved the problem by myself.... as usual

Bridge and NEF problem

I downloaded PS6 to my new Mac Mini and Bridge will not open my NEF thumbnails. I did not have this problem on my Mac Book Pro that I was using previously. Is there something else I need to download or change in preferences?

I finally got my Messaging Bridge (Tibco to a WLS Cluster) to work. See my post 3 messages before yours - to which no-one responded... :-(
          So here goes with my suggestion based on what I have done.
          1. Create a Distributed Destination for the WLS queue and "auto deploy" it your cluster. (Read the manual on how to do that, it is quite straightforward).
          2. In the Local Bridge Destination, put :
          Connection URL - nothing
          Initial Context Factory - weblogic.jndi.WLInitialContextFactory
          Connection Factory JNDI Name - <your JMS conection factory name>
          Destination JNDI Name - <the JNDI name given to the Distributed Destination>.
          I hope that works.
          Andy

[SOLVED] Bridging and Hostapd problems.

Hello!
I want to let a computer share the network it's connected to via wifi,
I am trying to use hostapd and after following the guide at https://wiki.archlinux.org/index.php/So … cess_Point
i have managed to get the access point up, but when I try to connect to it I get "> DHCP IP lease attempt failed"
Most examples mention dnsmasq, and I have it running with this configuration:
#cat /etc/dnsmasq.conf
interface=wlan0
dhcp-range=192.168.0.2,192.168.0.5,255.255.255.0,12h #
#cat /etc/network.d/bridge
INTERFACE="br0"
CONNECTION="bridge"
DESCRIPTION="Example Bridge connection"
BRIDGE_INTERFACES="eth0"
IP="dhcp"
#cat /etc/conf.d/netcfg
NETWORKS=(bridge)
WIRED_INTERFACE="eth0"
WIRELESS_INTERFACE="wlan0"
#cat /etc/conf.d/
NETWORKS=(bridge)
WIRED_INTERFACE="eth0"
WIRELESS_INTERFACE="wlan0"
#cat /etc/hostapd/hostapd.conf
interface=wlan0
bridge=br0
driver=nl80211
logger_syslog=-1
logger_syslog_level=1
logger_stdout=-1
logger_stdout_level=2
dump_file=/tmp/hostapd.dump
ctrl_interface=/var/run/hostapd
ctrl_interface_group=0
ssid=test_essid
hw_mode=g
channel=7
beacon_int=100
dtim_period=2
max_num_sta=5
rts_threshold=2347
fragm_threshold=2346
macaddr_acl=0
auth_algs=3
ignore_broadcast_ssid=0
wmm_enabled=1
wmm_ac_bk_cwmin=4
wmm_ac_bk_cwmax=10
wmm_ac_bk_aifs=7
wmm_ac_bk_txop_limit=0
wmm_ac_bk_acm=0
wmm_ac_be_aifs=3
wmm_ac_be_cwmin=4
wmm_ac_be_cwmax=10
wmm_ac_be_txop_limit=0
wmm_ac_be_acm=0
wmm_ac_vi_aifs=2
wmm_ac_vi_cwmin=3
wmm_ac_vi_cwmax=4
wmm_ac_vi_txop_limit=94
wmm_ac_vi_acm=0
wmm_ac_vo_aifs=2
wmm_ac_vo_cwmin=2
wmm_ac_vo_cwmax=3
wmm_ac_vo_txop_limit=47
wmm_ac_vo_acm=0
eapol_key_index_workaround=0
eap_server=0
own_ip_addr=127.0.0.1
wpa=2
wpa_passphrase=XXXXXXXXXXXXX
wpa_key_mgmt=WPA-PSK
wpa_pairwise=TKIP CCMP
rsn_pairwise=CCMP
This is the output of ifconfig
br0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
inet 10.144.0.225 netmask 255.255.252.0 broadcast 10.144.3.255
inet6 fe80::20f:53ff:feb0:2c49 prefixlen 64 scopeid 0x20<link>
ether 00:0f:53:b0:2c:49 txqueuelen 0 (Ethernet)
RX packets 263 bytes 29403 (28.7 KiB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 56 bytes 6081 (5.9 KiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
eth0: flags=4419<UP,BROADCAST,RUNNING,PROMISC,MULTICAST> mtu 1500
ether b8:27:eb:fc:1c:e5 txqueuelen 1000 (Ethernet)
RX packets 8926 bytes 704068 (687.5 KiB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 658 bytes 139938 (136.6 KiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
lo: flags=73<UP,LOOPBACK,RUNNING> mtu 16436
inet 127.0.0.1 netmask 255.0.0.0
inet6 ::1 prefixlen 128 scopeid 0x10<host>
loop txqueuelen 0 (Local Loopback)
RX packets 4 bytes 212 (212.0 B)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 4 bytes 212 (212.0 B)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
mon.wlan0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
unspec 00-0F-53-B0-2C-49-3A-30-00-00-00-00-00-00-00-00 txqueuelen 1000 (UNSPEC)
RX packets 47 bytes 3140 (3.0 KiB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 0 bytes 0 (0.0 B)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
wlan0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
inet6 fe80::20f:53ff:feb0:2c49 prefixlen 64 scopeid 0x20<link>
ether 00:0f:53:b0:2c:49 txqueuelen 1000 (Ethernet)
RX packets 0 bytes 0 (0.0 B)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 247 bytes 32731 (31.9 KiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
Note that the network I am connecting to is 10.144. and I can ssh into the machine trough this network.
When I connect with a wifi client I want it to get a 10.144. address and be able to interact with the other users
on the network as if it was directly connected to the network. (My main goal is this, but if I can get it working
as a router it's a improvement too)
Thanks for your help!
---EDIT--
I have now tried following this tutorial:
http://sirlagz.net/2012/08/09/how-to-us … er-part-1/
This part works, but when I come to part 2
http://sirlagz.net/2012/08/10/how-to-us … er-part-2/
It has this part that I cannot figure howto convert this to netcfg
iface br0 inet dhcp
bridge_ports eth0 wlan0
pre-up ifconfig eth0 0.0.0.0 up
pre-up ifconfig wlan0 0.0.0.0 up
pre-up brctl addbr br0
pre-up brctl addif br0 eth0
post-down ifconfig wlan0 0.0.0.0 down
post-down ifconfig eth0 0.0.0.0 down
post-down brctl delif br0 eth0
post-down brctl delbr br0
Last edited by Reccra (2012-09-28 09:32:36)

Thanks for your replies, now I have disabled ip forwarding,
the problem with ssh was that it tried to do a dns lookup that failed.
The reason it failed is that it seems like the bridge host (the one with br0) does not seem to be able to connect anywhere except to the client that is connected to it.
I mean:
(10.144.) - (10.144.2.107) - (10.144.0.46)
Net - Bridge - Client,
I can ssh into Bridge from Client, but I send cant anything (Ping/connect etc) from Bridge to Net. Everything works fine from Client to net tough.
[root@Bridge etc]# route -n
Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use Iface
0.0.0.0 10.144.1.1 0.0.0.0 UG 205 0 0 br0
10.144.0.0 0.0.0.0 255.255.252.0 U 205 0 0 br0
[root@Bridge etc]# ss -arpt
State Recv-Q Send-Q Local Address:Port Peer Address:Port
LISTEN 0 0 *:ssh *:* users:(("sshd",267,3))
ESTAB 0 0 10.144.2.107:ssh 10.144.0.46:56351 users:(("sshd",271,3))
ESTAB 0 0 10.144.2.107:ssh 10.144.0.46:56395 users:(("sshd",345,3))
LISTEN 0 0 :::ssh :::* users:(("sshd",267,4))
br0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
inet 10.144.2.107 netmask 255.255.252.0 broadcast 10.144.3.255
inet6 fe80::ba27:ebff:fefc:1ce5 prefixlen 64 scopeid 0x20<link>
ether 00:0f:53:b0:2c:49 txqueuelen 0 (Ethernet)
RX packets 73020 bytes 6867080 (6.5 MiB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 3130 bytes 800748 (781.9 KiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
eth0: flags=4419<UP,BROADCAST,RUNNING,PROMISC,MULTICAST> mtu 1500
ether b8:27:eb:fc:1c:e5 txqueuelen 1000 (Ethernet)
RX packets 74579 bytes 9464012 (9.0 MiB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 5060 bytes 818996 (799.8 KiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
lo: flags=73<UP,LOOPBACK,RUNNING> mtu 16436
inet 127.0.0.1 netmask 255.0.0.0
inet6 ::1 prefixlen 128 scopeid 0x10<host>
loop txqueuelen 0 (Local Loopback)
RX packets 156 bytes 15830 (15.4 KiB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 156 bytes 15830 (15.4 KiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
mon.wlan0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
unspec 00-0F-53-B0-2C-49-3A-30-00-00-00-00-00-00-00-00 txqueuelen 1000 (UNSPEC)
RX packets 477 bytes 53447 (52.1 KiB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 0 bytes 0 (0.0 B)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
wlan0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
inet6 fe80::20f:53ff:feb0:2c49 prefixlen 64 scopeid 0x20<link>
ether 00:0f:53:b0:2c:49 txqueuelen 1000 (Ethernet)
RX packets 8478 bytes 1086201 (1.0 MiB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 76359 bytes 12516094 (11.9 MiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
[root@Bridge etc]# arp -n
Address HWtype HWaddress Flags Mask Iface
10.144.1.1 (incomplete) br0
10.144.2.162 ether 00:23:5a:28:af:cb C br0
10.144.0.46 ether 00:23:4d:1b:19:b2 C br0
I tried adding the gw manually with arp -s , but this didn't help.
Thanks for your help!

CS5 Bridge and RAW

Bridge in my CS5 will not open Panasonic Lumix G5K camera RAW images. please direct me to necessary upgrades.

As per documentation this camera model make from Panasonic is not supported.
Please refer to follwoing knowledge base article for reference.
Camera Raw Plug-in| Supported Camera
http://helpx.adobe.com/creative-suite/kb/camera-raw-plug-supported-cameras.html
Camera Raw Compatible Adobe Applications
http://helpx.adobe.com/x-productkb/global/camera-raw-compatible-applications.html

Messaging Bridge and cluster problem

I am trying to setup the Messaging Bridge between MQ and WLS. Originally, we were going to use the Foreign JMS setup but the loss of transactionality was an issue (QManager cannot be assumed to be on the same box as our cluster). So we moved to the Messaging Bridge in the hopes that it will provide greater stability.
          I am following the example provided here https://messaging-bridge.projects.dev2dev.bea.com/ and setting up 2 JMS Destinations. Setting up the MQ Destination was trivial given that I had done it already with the Foreign JMS setup.
          But the destination that points to the internal WLS JMS Queue is a little trickier given that we are using clusters. I am stuck trying to figure out what Connection URL I should be using. According the the example above, I should use t3://localhost:7001 but in a clustered setup, what do I point to?

I finally got my Messaging Bridge (Tibco to a WLS Cluster) to work. See my post 3 messages before yours - to which no-one responded... :-(
          So here goes with my suggestion based on what I have done.
          1. Create a Distributed Destination for the WLS queue and "auto deploy" it your cluster. (Read the manual on how to do that, it is quite straightforward).
          2. In the Local Bridge Destination, put :
          Connection URL - nothing
          Initial Context Factory - weblogic.jndi.WLInitialContextFactory
          Connection Factory JNDI Name - <your JMS conection factory name>
          Destination JNDI Name - <the JNDI name given to the Distributed Destination>.
          I hope that works.
          Andy

Libvirtd: setup questions and permission problems

Hello,
i noticed that someone removed the section which states that the "user=" and "group=" parameters of the /etc/libvirt/qemu.conf should modified from the libvirt wiki page.
So i removed my qemu user and commented the "user=" and "group=" parameters from the /etc/libvirt/qemu.conf to keep up with newest changes.
But after this i can't start my virtual machines from the libvirt system session which i normally use. I always get the error: "Could not access KVM kernel module: Permission denied failed to initialize KVM: Permission denied"
If i add "user=root" in /etc/libvirt/qemu.conf and restart libvirtd.service i can start my virtual machines. But i think there must be a reason why someone removed this section from the wiki page.
Then i decided to test the user session, but i can't add storage or network in the user session, because i always get permission denied or operation permitted error messages. So i skipped further tests and decided to ask this here.
This is my work configuration:
- My user is in the kvm and in the wheel group
- Nothing commented out in the configuration files below /etc/libvirt
- I created the file "/etc/polkit-1/rules.d/49-org.libvirt.unix.manager.rules" with the content from the libvirt wiki page
- libvirtd.service is enabled
If you need more informations, please let me know.
Kind regards,
morlix
Last edited by morlix (2015-03-24 17:26:44)

Welcome to the forums.
I don't know exactly why the wiki has been changed, or if there is a 'best way' of using libvirt. But FWIW, my past and current working setup is as follows:
- My user is in the users and libvirt groups (and no others)
- The uncommented lines in my qemu.conf file are:
user = "alphaniner"
group="libvirt"
- I have the rule 50-org.libvirt.unix.manage.rules :
polkit.addRule(function(action, subject) {
if (action.id == "org.libvirt.unix.manage" &&
subject.isInGroup("libvirt")) {
return polkit.Result.YES;
I'm pretty sure that covers it. I have no issues using the gui to add networks or storage including raw storage devices owned by root.
Last edited by alphaniner (2015-03-24 21:27:17)

Account and permission problems

I have an account with iTMS which I use on my old machine.
I want to deauthorize it and move iTunes onto my new laptop.
Problem is I cannot remember my password and the email address I have logged as on my account is no longer active!
Can I have my account amended by Apple if I send someone my account detials (new and old) - or is there a way I can get my password sent to my new email address?
If I change my email address (once I have obtained the password to do so) will this stop my previous purchases from playing?

Go here. As long as you can remember the answers you set to the security questions, you can reset the password. If you've also forgotten the security questions, then you'll need to contact the iTMS customer service group through the form at the bottom of this web page.
If I change my email address (once I have obtained the password to do so) will this stop my previous purchases from playing?
No, it won't.

CS5 Bridge and Photoshop not opening the CR2 files from my Canon 6D. Please help!

Any and all ideas would be appreciated greatly. Working on a deadline. Thank you so much!

Cannon 6D requires CS6 with ACR 7.3. You either have to upgrade or convert to DNG files.

CS5 Bridge low on system resources

Everytime I open CS5 bridge and work on my camera raw files I get the foloowing error message: bridge low on system resources and needs to be closed. I never had this problem in CS4. I am running Windows XP Pro with 4gb of ram. I have talked to Adobe Tech support 3 times this week and have not been able to fix the problem. Is any one else having this problem?

I've experienced these exact same problems, and have been watching for anything useful to be added to this and one other thread.
( http://forums.adobe.com/message/2847218#2847218 )
I did install the update released by Adobe today (May 27) but unfortunately nothing has changed.
I was interested to read that you did not have these problems with CS4 (as I skipped that version and upgraded from CS3). So, it appears that this is a problem specific to CS5.
For now, my "workaround" is to abandon CS5 and go back to using CS3. NOT a great solution...or use of my money;but I have to get some work done!

CS6 Bridge always launches CS5 Bridge

After installing CS6 from Cloud upgrade, when ever I launch Bridge CS6, it always just launches the CS5.x version of Bridge.
I've tried both 32bit and 64bit with the same results. My other CS6 apps seem to be working fine.
This occurs no matter which Bridge CS6 icon I use (shortcuts and from the main directory.) Do I need to uninstall CS5 Bridge to get it to work?

No do not uninstall CS5.
You have Bridge CS5 running the the background. Open CS5 Bridge and go to edit/preferences/advanced and uncheck "open Bridge at logon".
Then open Task Manager and click Processes tab. Look for bridge.exe and close it.

CS6 Beta Modifies CS4 & CS5 Bridge File Associations (W7 Pro 64Bit SP1)

Symptoms:
After installing CS6 including bridge CS6 onto a W7 pro 64Bit Machine with SP1.
The File associations in the existing copies of CS4 and CS5 bridge are updated to make the CS6 Beta the default programme for opening the majority of file types from either CS4 or CS5 bridge.
When right clicking ona file from CS4/5 bridge only the option of opening in CS6 is presented
Expected Bahaviour:
I expected that CS6 would be the default programme launched from CS6 bridge but that CS4/CS5 would remain the default programmes launched from their own versions of bridge.
Setting CS6 as the default file association in previous versions of bridge makes no sense at the Beta stage, as it interupts a clean migration back to existing workflow.
I would also question the value in not preserving the existing file associations in prior versions of bridge in the final CS6 release, as there are cases when it might be desirable to go back to a previous version of CS, in which case opening that version of bridge and launching directly into the prior versions of CS is very desirable.
Is there anyway to quickly restore the previous associations in CS4/CS5 bridge and be sure that they are exactly the same as prior to the CS6 beta install ?

Sorry for the noise. I misunderstood your depth of knowlege and what you had tried. I also committed the sin of not testing the procedure all the way through because I did not want to change the association on my computer. I get the same behavior.
Guess for .jpg
Registry shows for .jpg:
HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\FileExts\.jpg\UserCho ice Progid = Applications\Photoshop.exe
HKEY_LOCAL_MACHINE\SOFTWARE\Classes\Applications\Photoshop.exe\shell\open\command (Default) = "C:\Program Files\Adobe\Adobe Photoshop CS6 (64 Bit)\Photoshop.exe" "%1"
UserChoice seems to be added when I made the association choice. Note that it points into Applications with a non-version specific Photoshop.exe. Within HKLM\....\Applications there is only one Photoshop.exe -- no version -- and that entry points to CS6.
I believe that explains why the browsed to association is CS6. It does not explain why it would be set up that way. Probably has something to do with Windows special handling of certain file extensions. Beyond my depth and tells me I am not going to find a solution.

CS5 Bridge and Permission Problems

Similar Messages

Maybe you are looking for