CS5 Bridge and Photoshop not opening the CR2 files from my Canon 6D. Please help!

Any and all ideas would be appreciated greatly. Working on a deadline. Thank you so much!

Cannon 6D requires CS6 with ACR 7.3.  You either have to upgrade or convert to DNG files.

Similar Messages

  • Opening CR2 files Canon G1XMark2; PS 12.0.4; Mac OS 10.9.4.  Can not open the CR2 files.  Any suggestions?

    Having problem opening my CR2 files from my Canon G1XMark2.  I did not receive a CD with the camera purchase.  Any suggestions?  JMW

    Other than upgrading to photoshop cs6/cc 2014 or buying adobe lightroom 5.6, you could use the adobe dng converter 8.6 to convert the files to dng copies, which photoshop cs5 should then open.
    Adobe - Adobe Camera Raw and DNG Converter : For Macintosh : Adobe DNG Converter 8.6
    how to use
    Camera Raw: How to use Adobe DNG Converter - YouTube
    You might check on the canon website and see what's available, though it depends on the camera as to what software canon offers for free.

  • I downloaded the new version of bridge and it wont open the raw files on my mac.

    I downloaded the new version of bridge and it wont open the raw files on my mac.

    hello and thank you for your suggestion. I have tried it and, when trying to open a program which I previously was able to, still get the following message:
    Remote XUL
    This page uses an unsupported technology that is no longer available by default in Firefox.
    Please contact the website owners to inform them of this problem.
    Seems unbelievable that I previously had no problem and now I do. Have you any suggestions to overcome this? Do you think I can go back further in Firefox history to get a version that will make it possible to access this. Many thanks! Lynn

  • I have Lightroom 3.6 and Camera Raw 6.6 but I can't open my CR2 files from my Canon eos 6D

    Hi,
    I have Lightroom 3.6 and Camera Raw 6.6 but I can't open my CR2 files from my Canon eos 6D
    Lightroom doesn't show a thumbnail image and when trying to import it says the camera format isn't supported. But normaly Camera raw 6.6 should cover the Canon eos 6D
    All help is welcome,
    Thanks

    No, the older versions are not free.  If you upgrade you will have to get Lr5 unless you can still find Lr4 for sale somewhere as it has been discontinued by Adobe.  You can also use the FREE DNG converter to convert the 6d files for use in Lr3.6.

  • Adobe Lightroom, Photoshop and Bridge does not recognize the raw files from my Canon Mark III 5D Camera.

    Adobe Lightroom, Photoshop and Bridge does not recognize the raw files from my new Canon Mark III 5D Camera.  How can I get my files open to view and edit?  I am using LR3, Photoshop CS3 and Bridge CS3.  Do I need to upgrade these programs or is there another way to get these programs to recognize my files?
    When I try opening the raw images in Lightroom, the thumbnails say "Preview unavailable for this file"  ... when I click "import" an error message pops up that says "The files are from a camera which is not recognized by the raw format support in Lightroom."
    When I try opening the raw images in Photoshop, an error message pops up saying "could not complete your request because photoshop does not recognize this type of file."
    When I try opening the raw images in Bridge, it just shows an icon with the file name and CR2.
    Please help!!!

    Unless I missed an announcement, today, LR6 isn't available, yet, right?  Only Adobe employees and beta testers would know what LR6 does differently at this point and they're all sworn to secrecy.
    LR5 is available as a standalone version.
    PS-CS6 is available as a serial-number-licensed version.
    PS-CC + LR5 are also available as a Photography Plan subscription for $10/month with a minimum OS versions of OSX 10.7 (and probably 10.8, soon) and Windows 7.
    Bridge is part of PS, not a separate program.
    LR5 standalone and LR+PS-CC plan are both available on this page:  http://www.adobe.com/products/catalog/software.html
    PS-CS6 can be found on this page:  Creative Suite 6 which can be found by searching www.adobe.com for Photoshop CS6 and clicking the Buy link in the on-the-fly search results.
    As with any new Adobe software, it might be wise to run it in trial mode for a few days/weeks to see if it works well with your computer, before purchasing and finding out you might need a new computer, first.

  • I have updated my PSE9 and still can not open the RAW files from my new camera, I get an error?

    I bought a new camera (Canon T5i) and took photos in RAW, tried to open them in PSE9 and they wouldn't open. I got the following error...
    Canon RAW Codec found a new CR2 file that is not supported by the installed version.
    You can download the Canon RAW Codec update program from the link below.
    (Canon Server)
    I have been to the link & downloaded what update it had. I have also done the available updates on my PSE9 and I am still getting this error messge. When I called Canon regarding this they said I needed to contact Adobe.
    Can someone please tell me what I am doing wrong or not doing so I can open these files???

    The T5 is supported by Camera RAW 8.4 which needs PSE12. You can use the Canon software to convert RAW to TIF or the Adobe DNG Converter. The converter will convert the CR2 files to Adobes RAW DNG format that will open in PSE9's RAW processor. http://www.adobe.com/uk/products/photoshop/extend.displayTab2.html#downloads.
    Cheers,
    Neale
    Insanity is hereditary, you get it from your children
    If this post or another user's post resolves the original issue, please mark the posts as correct and/or helpful accordingly. This helps other users with similar trouble get answers to their questions quicker. Thanks.

  • Can i open raw cr2  files from my canon 70d in photoshop elements 12 as my elements9 wont?

    I am struggling to open photos from my canon 70d in  elements9 will elements12 open them?

    Yes, pse 12 will open the files from a canon 70D
    (after the camera raw plugin is updated using Help>Updates in the pse 12 editor)
    In the meantime, you can use the free adobe dng converter to convert your 70D files to dng copies, which pse 9 should then open.
    windows:
    Adobe - Adobe Camera Raw and DNG Converter : For Windows : Adobe DNG Converter 8.5
    mac:
    Adobe - Adobe Camera Raw and DNG Converter : For Macintosh : Adobe DNG Converter 8.5
    How to use the adobe dng converter:
    Camera Raw: How to use Adobe DNG Converter - YouTube

  • Dreamweaver cc 2014.1 will not open the html files from my business catalyst site

    I just imported my business catalyst site (originally built with Muse) into dreamweaver.  the whole site downloaded as expected and dreamweaver maintains that the 2 folders have the same files.  When I click to open any file in Dreamweaver it appears to open and then close the file immediately giving no indication of a problem. 
    Anyone come across this and or have any idea what could be happening?  I can open these files in Text Wrangler.
    I have followed the steps of deleting preferences etc that I have come across in my search today.  None of those helped. 
    Files from other sites seem to be opening fine.
    Thank you.

    The only files I am encountering this issue with are the ones I downloaded from BC into a brand new folder.  Further, any new files that I create in Dreamweaver and then save to the local root folder of the site I downloaded from BC will no longer open after I close them.  I can open all of the files I downloaded from BC in text wrangler with no problem.  I have about 10 other sites I am having no issues with what so ever.
    I am considering this an isolated issue between Dreamweaver and the folder that I imported my BC site to as I have never had any other issue with using Dreamweaver. 
    But to answer your questions:
    1.  no
    2.  no issue
    3.  yes, no issue.
    4.  yes.  all of them.
    5.  not doing this one. 

  • GARAGEBAND WILL NOT RECOGNIZE THE MP3 FILES FROM MY EDIROL RECORDER? HELP!!

    I have recently recorded some MP3 files on my Edirol R-09 recorder, and when I try to import them int garageband, it acts like it is loading them, but they do not appear, even if I try to put them in from iTunes, where I can play them and hear them, no problem. I can drag in any music MP3's into Garageband and they load, but not the audio recordings I am making, I am stumped, I would appreciate any help I can get. I had no problem with this same process on my old laptop? e-mail - [email protected]

    http://www.bulletsandbones.com/GB/GBFAQ.html#PortableRecorderMp3s
    (please don't type in all caps)

  • I have a Canon 5D Mk lll/Photoshop & Bridge CS6/Camera Raw 7.1 and I still can't open the CR2 files

    I have a Canon 5D Mk lll/Photoshop & Bridge CS6/Camera Raw 7.1 and I still can't open the CR2 files on my Canon.
    Any insight/wisdom would be much appreciated. Thanks

    When you try to open in PS what happens?
    In Bridge do you see icons or thumbnails?
    Will it open in ACR in Bridge?

  • I am trying to update Adobe Bridge and Photoshop CS6, because it is not opening my CR2 files taken by my Canon 6D.  I have tried to go to help updates, and the software says that it is "Up to Date".  However, if I view the plug-in, it says that Camera R

    I am trying to update Adobe Bridge and Photoshop CS6, because it is not opening my CR2 files taken by my Canon 6D.  I have tried to go to help > updates, and the software says that it is "Up to Date".  However, if I view the plug-in, it says that Camera Raw is only version 7.1.  I can not find a direct download for Camera Raw 7.3, only the DNG converter, NOT CAMERA RAW!  Please Help!

    Did you fix your issue?  I am having the same one

  • I want to edit my raw images on cs5 photoshop.  But when I go to open the .CR2 file it says  '' Could not complete your request because the file appears to be from a camera model which is not supported by the installed version of Camera Raw. Please visit

    I want to edit my raw images on cs5 photoshop.  But when I go to open the .CR2 file it says 
    '' Could not complete your request because the file appears to be from a camera model which is not supported by the installed version of Camera Raw. Please visit the Camera Raw help documentation for additional information.  '' 
    When I go to updates in photoshop help i try to update photoshop and photoshop camera raw but it then says 
    '' Updates could not be applied the error log file may help you in identifying the problem. Then, try updating again. If the problems persist, contact customer support for further assistance. 
    Photoshop Camera Raw 8.7.1(CS6) There was an error installing this update. Please quit and try again later. Error Code: U44M1I216 ''  
    I dont know how to get around this please help

    CR2 files from which Canon camera?
    Supported cameras are listed here
    Camera Raw plug-in | Supported cameras

  • I shoot with a Canon 7D, have Windows 7 installed on my computer, Adobe CS4 (Bridge & Photoshop). I'm trying to open the CR2 files in Bridge to adjust them before I open them up in Photoshop, but it's giving me an error code saying it's the wrong file typ

    I shoot with a Canon 7D, have Windows 7 installed on my computer, Adobe CS4 (Bridge & Photoshop). I'm trying to open the CR2 files in Bridge to adjust them before I open them up in Photoshop, but it's giving me an error code saying it's the wrong file type. I downloaded the latest updates for Adobe Raw as well as the DNG converter, however I don't want to have to convert to DNG before opening in Bridge. Please let me know what I can do to open the CR2 files directly in Bridge CS4, thank you!

    Make sure you have the right version...
    Camera Raw plug-in | Supported cameras
    Camera Raw-compatible Adobe applications

  • I have Lightroom 3 and have downloaded the DNG CONVERTER 8 7 1 to be able to open my CR2 files from my new canon 7d, however It still will not open my images

    I have Lightroom 3 and have downloaded the DNG CONVERTER 8 7 1 to be able to open my CR2 files from my new canon 7d, however It still will not open my images

    Fab ! Thanks so much. Sorry if these questions are rudimentary but i have been out of the game for a while and getting back into it, i have aged and technology has expanded! Am trying to re learn and keep up ! I appreciate the help

  • I am using PSE 9. I had no problem opening my Raw files from my Canon Rebel XT  Now  I have a Rebel 5ti and pse 9 won't reconize the Cr2 files

    I am using PSE 9. I had no problem opening my Raw files from my Canon Rebel XT  Now  I have a Rebel 5ti and pse 9 won't reconize the Cr2 files

    See this faq:
    FAQ: Will Photoshop Elements work with my camera, or Why won't my raw files open?
    That will explain why each new camera model uses its own raw format. (.CR2 does not indicate a format, only a Canon family of formats).
    The first link tells you what version of camera raw is needed for your camera : https://helpx.adobe.com/creative-suite/kb/camera-raw-plug-supported-cameras.html
    You need ACR 7.4
    The second link tells you which ACR versions are supported by Elements versions Camera Raw-compatible Adobe applications
    PSE9 supports version 6.5
    Further down on that paper, you get links to download the free Adobe DNGconverter for Mac or Win.
    This standalone software can batch convert a whole folder of raw files to the DNG raw file format that your present PSE9 can read.
    Otherwise, you would have to upgrade to version 10 or later.

Maybe you are looking for

  • Report to fetch Actual cost from a service order

    Hi Gurus, The requirement is to create a report to fecth the actual cost from the maintenance order. ie.. material cost , labor cost and some other costs which are directly posted to the order. Can anybody let me know from which tables I can pull the

  • Problem on setting pagelabel using acrobat sdk

    hi all, On setting pagelabel into the pdf file using acrobat sdk 9, we have an issue while opening the pdf file in notepad we got the value of pagelabel as <</P(CoverNUL)>> for your reference i have attached the screenshot and my code is below ASInt3

  • Pesky lines between images in dreamweaver

    Help, I have created a simple web pager here.... www.therevelgoup.com .... There are faintlines between the images and rollover images. Any suggestions on how to remove those? thank you in advance.

  • Elements 11 and raw files

    Can Elements 11 accomodate raw files from my Panasonic Lumix LX5?

  • Oracle Role for User Administration

    Hello, I am a DBA. We have a separate group that maintains oracle user accounts within an oracle database. We would like that group to maintain users (add/remove users from database, add/remove roles, etc.) but we do not want to give them the 'DBA' r