CS5 Bridge stutters

I upgraded from CS4 to CS5 with no
issues. I can open both the 32 and 64 bit version of PS with no issues.
But when I open CS5 Bridge, the PC slows and my mouse stutters. My processor meter jumps up to 50% and then down to zero...like its stuck...and will continue to do this until I close bridge...and then all is fine.
I have 8GB of memory and have tried all forms of settings in the PS memory allocation, cache sites, etc...nothing changes.
I have tried resetting bridge using the CNTRL command on opening. I have tries manual removing cache loacstions, etc.
All with no change.
I even tried removing and reloading CS5...no change.
Anyone have any ideas?
I have a case open but the PFD response "every two days try this" is getting really frustrating!!!!

Dear Customers,
I am Baichao, Adobe Bridge Quality Engineer.
Bridge team is investigating this error, In order to reproduce the problem in our lab and find a solution as soon as possible, I would like to ask you to help providing more information, please follow steps below,
1. Download "User Mode Process Dumper Version 8.1" from
http://www.microsoft.com/downloads/en/confirmation.aspx?familyId=e089ca41-6a87-40c8-bf69-2 8ac08570b7e&displayLang=en
2. Install "User Dumper" following Microsoft's article
http://support.microsoft.com/kb/241215
3. Open "Control Panel -> Process Dumper", switch to tab Page of "Processing Monitoring"
4. Click button "New", input "Bridge.exe" for "Application Name".
5. Select "Bridge.exe" from list box, then click button "Rules",
                Select "Use Custom Rules",
                Browse to a custom dump file folder,
                Check "All Exceptions",
                Check "Ignore Exceptions that occur inside Kernel32.dll",
                Select "Mini Dump Type" to "Small"
                Select "Save Mode" to "Cyclic Saving 5 times"
                Others keep uncheck or unselect.
6. Click "OK" button to exit "Rules" setting dialog, then Click "Apply" button, then click "OK" to quit "Process Dumper " dialog.
7. Launch Adobe Bridge CS5, do your work.
8. when Bridge hang, wait for a while, then kill bridge using "Task Manager", please check if there any ".dmp" file in "custom dump file folder " which is set in step 5, if so, please zip all .dmp files and FTP to us (please contact me at [email protected] for FTP info). It would be better if you can repeat your hang and send us more zipped .dmp files.
Sincerely appreciate if you could provide us your workflow before Bridge throws that error message, what file formats you use, what features you use and your machine information.
Best Regards,
Baichao Li

Similar Messages

CS6 Bridge always launches CS5 Bridge

After installing CS6 from Cloud upgrade, when ever I launch Bridge CS6, it always just launches the CS5.x version of Bridge.
I've tried both 32bit and 64bit with the same results. My other CS6 apps seem to be working fine.
This occurs no matter which Bridge CS6 icon I use (shortcuts and from the main directory.) Do I need to uninstall CS5 Bridge to get it to work?

No do not uninstall CS5.
You have Bridge CS5 running the the background. Open CS5 Bridge and go to edit/preferences/advanced and uncheck "open Bridge at logon".
Then open Task Manager and click Processes tab. Look for bridge.exe and close it.

CS6 Beta Modifies CS4 & CS5 Bridge File Associations (W7 Pro 64Bit SP1)

Symptoms:
After installing CS6 including bridge CS6 onto a W7 pro 64Bit Machine with SP1.
The File associations in the existing copies of CS4 and CS5 bridge are updated to make the CS6 Beta the default programme for opening the majority of file types from either CS4 or CS5 bridge.
When right clicking ona file from CS4/5 bridge only the option of opening in CS6 is presented
Expected Bahaviour:
I expected that CS6 would be the default programme launched from CS6 bridge but that CS4/CS5 would remain the default programmes launched from their own versions of bridge.
Setting CS6 as the default file association in previous versions of bridge makes no sense at the Beta stage, as it interupts a clean migration back to existing workflow.
I would also question the value in not preserving the existing file associations in prior versions of bridge in the final CS6 release, as there are cases when it might be desirable to go back to a previous version of CS, in which case opening that version of bridge and launching directly into the prior versions of CS is very desirable.
Is there anyway to quickly restore the previous associations in CS4/CS5 bridge and be sure that they are exactly the same as prior to the CS6 beta install ?

Sorry for the noise. I misunderstood your depth of knowlege and what you had tried. I also committed the sin of not testing the procedure all the way through because I did not want to change the association on my computer. I get the same behavior.
Guess for .jpg
Registry shows for .jpg:
HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\FileExts\.jpg\UserCho ice Progid = Applications\Photoshop.exe
HKEY_LOCAL_MACHINE\SOFTWARE\Classes\Applications\Photoshop.exe\shell\open\command (Default) = "C:\Program Files\Adobe\Adobe Photoshop CS6 (64 Bit)\Photoshop.exe" "%1"
UserChoice seems to be added when I made the association choice. Note that it points into Applications with a non-version specific Photoshop.exe. Within HKLM\....\Applications there is only one Photoshop.exe -- no version -- and that entry points to CS6.
I believe that explains why the browsed to association is CS6. It does not explain why it would be set up that way. Probably has something to do with Windows special handling of certain file extensions. Beyond my depth and tells me I am not going to find a solution.

Trying to install Adobe Premiere elements 12. When it gets to "Installing required Shared Technologies" stage it gives errror "Setup has detected that Adobe Bridge CS5 (Bridge.exe) is currently in use. Please close all running exe(s). Nothing is runnin

question: Trying to install Adobe Premiere elements 12. When it gets to "Installing required Shared Technologies" stage it gives errror "Setup has detected that Adobe Bridge CS5 (Bridge.exe) is currently in use. Please close all running exe(s). Nothing is running when trying to install this, have been through this process several times. Found undertroubleshooting to delete files PDAppFlex.swf and PDAppFlex-app.xml and have done that as well. Any help will be greatly appreciated

Try Error "Installation cannot continue until... Adobe Bridge is closed" | Installation | CS5

CS5 Bridge and Elements

Hello,
I happen to have Adobe Photoshop Elements 8.0 Plus and Adobe CS5 installed on my desktop.Both programs work fine when using one or the other.My problem is if I have CS5 Bridge open and highlight a photo that I want to open (right click open or top file menu)the photo opens in Elements 8 Edit.I would think it should open Photoshop 5,but can't seem to find where to change it from.I keep Elements installed because its handleing the photo backups right now.Any suggestions?I'm missing something I'm sure.Thanks.

My problem is if I have CS5 Bridge open and highlight a photo that I want to open (right click open or top file menu)the photo opens in Elements 8 Edit.
Go to Bridge edit/preferences/file type associations and change the defalult program for extenstion to CS5.
And if you have keywords in Elements they can be read in Bridge, you just have to find the option to write files to metadata.

CS5 Bridge Tools\Photoshop Menu Options aren't working ...

The CS5 Bridge Tools\Photoshop Menu Options that contain the Image Processing / Photomerge / HDR Pro features that open images from Bridge into Photoshop isn't working ... has this happened to anyone else? Have you any ideas how to fix this?
I've cleared cache, windows temp files, and moved the majority of my files to my NAS drive, so the laptop (Window 8 64-bit) is fine ... or so it seems!

Did you have to uninstall everything and reinstall 2014? CC 2014 was installed automatically. My program files show Ps CC and Ps CC 2014. The automatic installation of 2014 is what caused the problem.

After upgrading to OSX-10.8 (mountain lion) CS5 Bridge Crashes when opening.

I know others have commented on this "issue". I also notice that elsewhere on the web, there are reports of it being a Radeon ATI issue. I've tried repairing links / permissions, tried re-installing the latest Bridge update... All to no avail.
PLEASE help Adobe. My CS5 Bridge is useless now. I'm seriously contemplating restoring 10.7.
Process:
Adobe Bridge CS5 [3373]
Path:
/Applications/Adobe Bridge CS5/Adobe Bridge CS5.app/Contents/MacOS/Adobe Bridge CS5
Identifier:
com.adobe.bridge4
Version:
4.0.5.11 (4.0.5.11)
Code Type:
X86 (Native)
Parent Process: launchd [221]
User ID:
501
Date/Time:
2012-07-31 17:53:48.898 +1000
OS Version:
Mac OS X 10.8 (12A269)
Report Version: 10
Interval Since Last Report:
5671 sec
Crashes Since Last Report:
10
Per-App Interval Since Last Report: 34 sec
Per-App Crashes Since Last Report:   10
Anonymous UUID:
1157DD9D-250F-46CA-B3AE-1988FE0DDCCE
Crashed Thread: 0 Dispatch queue: com.apple.main-thread
Exception Type: EXC_BAD_ACCESS (SIGSEGV)
Exception Codes: KERN_INVALID_ADDRESS at 0x000000000956a000
VM Regions Near 0x956a000:
shared memory
0000000009561000-000000000956a000 [   36K] r--/r-- SM=SHM
--> shared memory
000000000956a000-000000000956b000 [
4K] rw-/rw- SM=SHM
VM_ALLOCATE
0000000009571000-0000000009573000 [
8K] rw-/rwx SM=PRV
etc...

Reposting myself here:
Have you made your user Library-folder visible in Finder?
I did that in the Terminal and shortly after that the crashes started for me.
I just updated to 10.8.2 and that made the user Library-folder invisible again.
At the same time Bridge started behaving properly.
Not saying that's anything other than a coincidence.

How can I use the templates I generated in CS5 Bridge, in Lightroom 4.4?

How can I use the templates I generated in CS5 Bridge, in Lightroom 4.4 ?
It appears that I can not link the templates which I have been using in Bridge for some time to Lightroom 4.4.
Is this done on purpose?
Thanks in advance
Doppy

I assume these are metadata templates?
in Bridge, apply a template to an image which has no other metadata (eg a dummy image ) and then import the image into Lightroom, ensuring no metadata applied in the Import dialog. Now in Lightroom's Metadata panel, save the metadata as a new Metadata Preset.
Repeat for each template.

Why can't I do batch actions from CS4 or CS5 Bridge now when I could before?

Something has changed in my functions for doing batch actions in Bridge. In CS5 Bridge I try to do a simple batch action of saving a DNG file as a jpg and closing the file. When I attempt this I get a message saying 'The command "Save" is currently not available.
I try to do the same thing in CS4 Bridge. I go to the Tools menu and look for Photoshop in the drop down menu but it's not there. This is how I do batch action processing with my Windows version of CS4 Bridge. I am confused about what has changed when I was able to do batch actions routinely in CS4 and CS5 Bridge on my Mac.

Something has changed in my functions for doing batch actions in Bridge. In CS5 Bridge I try to do a simple batch action of saving a DNG file as a jpg and closing the file. When I attempt this I get a message saying 'The command "Save" is currently not available.
Batch using tools menu from Bridge to reach Photoshop should work as expected in both CS4 and CS5. If not then there is something wrong on either your system or install.
Go to Bridge CS5 preference and look for the section Start Up Scripts and see if there is still a Start Up Script for Photoshop CS5 present and with a checkmark in front for activation. If not try first to restart bridge holding down option key and choose refresh preferences. This should retrieve the original Start Up scripts again.
If your command save as is not available check the action and see what the save path for that acton is. If it is a copied action from an other system changes are that it still contains the save path for the old drive and if the script can't find it it provides a warning message.
Also check if the drive you save to has both read and write permission.

I cant upload cs5 bridge web gallery to dreamweaver

Hello I created a web gallery in cs5 bridge. When I try to upload to dreamweaver I get an error message (access denied when creating directory). Is there any other way to to get my web gallery to dreamweaver? Thank you for your help in advance.

Hi,
you could use David Powers tutorial here the link to it:
http://foundationphp.com/tutorials/gallery/embed1.php.
Hans-Günter

Why doesn't CS5 Bridge see my RAW photos from my Canon 7D?

I just got a new Canon 7D. I can't open Raw files in CS5 Bridge...it only sees jpgs. Is there a setting I need to change? I have updated CS5 to latest updates.

7D support was introduced with ACR 5.6, which was an update for CS4.
Have you tried opening a 7D raw with Photoshop directly (File > Open ...)?
Are you using a non-standard raw format (I dunno, I don't shoot Canon, but I believe there are alternative raw types)?
Can you confirm that ACR is correctly installed? Photoshop > Help > About Plugin... - there should be one copy of Camera Raw, currently version 6.4.
It should be physically located at:
Windows: C:\Program Files\Common Files\Adobe\Plug-Ins\CS5\File Formats and/or C:\Program Files (x86)\Common Files\Adobe\Plug-Ins\CS5\File Formats
Mac: /Library/Application Support/Adobe/Plug-Ins/CS5/File Formats
and nowhere else!

View photo folders not files in CS5 Bridge

How do I get back to the view of my photo folders? I can only see individual photo files, and not all of them now. Don't know what I did to make this happen. I have a 2009 iMac and CS5 Bridge (Adobe Creative Suite 5 Design Premium).

How do I get back to the view of my photo folders? I can only see individual
photo files, and not all of them now.
Go to the folder panel (if it is not in view go to menu window and select
folders panel) and inhere choose the main folder where your images are
nested in subfolders.
If you select a main folder with only subfolders it shows you only folder
icons, if there are also images in that main folder itself it shows you both
the files and folders.
Using the command 'show items from subfolders' (menu view) you get both
folder and all the files from that main folder.

File size variations in Cs5, Bridge, & Mac when opening D800e raw files

I am getting extreme variations in file size when I open my D800e nefs in photoshop cs5, & Bridge. When I highlight the same nefs on my Mac(10.6.8) & "get info", I get another file size. D800e files are about 103 MB each at 8 bit, but can vary dramatically when I open them in Bridge or Cs5. Any ideas? Thanks!

Thank you for responding. I understand what you are saying. After more attempts at resizing nef files into tifs, and then restarting my computer, everything seems to be ok. However, when I make a four shot stitched pan with the D800e, I encounter the same problem even after downsizing to a more manageble file size. Each photo in the pan is originally 103MB. After resizing the 4 shots to 30MB each, I end up with a pan that is about 75MB in CS5 after cropping. When I highlight this pan & "get info" on my Mac desktop, the image size is 300-400 MB. I can ignore this for personal use, but if I have to send it to a client via the internet its a problem. I have made stitched pans with my D3s with no problem at all, so I guessing I have to switch cameras when I want to stitch shots together. If anyone has any more comments feel free!

Jpeg thumbnails too dark in CS5 bridge

All of a sudden my jpeg thumbnails appear very dark and muddy in CS5 bridge. Such images are of normal brightness when opened in Photoshop proper.
Equally puzzling is when a jpeg image is then "saved as" back to the same folder as a TIFF (for example) the jpeg looks dark but the TIFF version of the same file looks correct. RAW files still look correct.
This seems to be a recent problem as jpeg images I processed a few ago weeks ago still dislay normally in bridge.
I've tried purging the folder cache without effect. Thumbnail quality is set to "always high". I feel I may have accidentally altered a setting but cannot think wghat it might be. Please help.

Since my posting I have realised this problem is confined to images from the Nikon D800 camera ONLY. Jpegs from my other Nikon cameras display normally.
That does indeed not indicate to a cache problem alone. But you stated in your earlier post purging cache did solve the problem temporarily hence my idea about this solution.
I still think you should try to move the files to another new folder but you have provided us with very less detail about what computer, systemOS etc you are using and if you have the correct ACR version for support of your Nikon D800 which I believe is ACR 6.7 (in Photoshop use menu Photoshop / about Plug ins / Camera Raw to check which version you have.
Just to say I shoot RAW and batch convert to sRGB jpeg from ACR. It doesn't matter what size option I save to from ACR.
I don't follow this workflow, shooting Raw provides you with all details and data from your sensor but you need to go through them for fine tuning the settings. Shooting jpeg means you loose a lot of those details and let the camera software decide to fine tune for you (in a nutshell, it is a bit more complicated…)
Shooting Raw and without change settings and fine tune just convert these files to sRGB jpeg is in my opinion pointless. You better use the option to shoot Raw + jpeg and use the jpegs out of camera for this purpose.

'Adjustment Brush' in CS5 Bridge

The adjustment brush in my CS5 Bridge is no longer working. Can some offer me a solution?

The adjustment brush in my CS5 Bridge is no longer working
This is a tool in Adobe Camera Raw (ACR) and ACR is a plug in that works in both Photoshop and Bridge. If you choose to open a file by pointing at it in the Bridge content panel it opens in ACR using Photoshop.
If you choose to Open In Camera Raw it opens in ACR using Bridge.
So first test both options, but it is likely you will get a better answer in the dedicated Camera Raw forum.
http://forums.adobe.com/community/cameraraw

CS5 Bridge stutters

Similar Messages

Maybe you are looking for