CS5 Bridge view mode

I get a slightly blurred picture when using view > full screen preview. when I click on the picture and get a 100% size view it is sharp...

Have you set "Generate Monitor-Sized Preview" in Preferences > Advanced?
What type of image file are you viewing?

Similar Messages

View photo folders not files in CS5 Bridge

How do I get back to the view of my photo folders? I can only see individual photo files, and not all of them now. Don't know what I did to make this happen. I have a 2009 iMac and CS5 Bridge (Adobe Creative Suite 5 Design Premium).

How do I get back to the view of my photo folders? I can only see individual
photo files, and not all of them now.
Go to the folder panel (if it is not in view go to menu window and select
folders panel) and inhere choose the main folder where your images are
nested in subfolders.
If you select a main folder with only subfolders it shows you only folder
icons, if there are also images in that main folder itself it shows you both
the files and folders.
Using the command 'show items from subfolders' (menu view) you get both
folder and all the files from that main folder.

Any way to get frame accurate in icon view mode?

Does anyone know if there is a way set frame accurate in points in icon view mode? I know that if you are "hover scrubbing" a clip, and then click on it you can use the JKL keys to shuttle through the footage. But is there any way to go frame-by-frame through the footage as well?
I ask because I have a 4-camera shoot where the clips were synced by a slate clap. I'd like to make a multicam clip from the shots so am going through and setting the "clap" as the in point of each clip, and then using them as sync points for the multicam clip. I hover scrub to the general area of the slate clap (works great) then use the JKL key to narrow in "clap" even more (also works great). However, it is nearly impossible to stop exactly on the frame where the slate hits using the JKL keys. So I would like to get in the general vicinity using JKL, and then use some other keys or method to get to the exact frame of the "clap". One would assume that the arrow keys would do this, but they don't.
Does anyone know if there is a way to accomplish this? Thanks in advance for any help.

I understand your point, and it never ocurred to me that I part of my normal workflow when doing things like that to more than a few clips is to select all of the clips and put them all in the Source Monitor with a single command. (Select them all, right click, and select "Open in Source Monitor".) So I don't go back and forth between windows. I guess I have been doing it so long I missed that step in the explanation. Sorry about that. Also, please understand that I skipped CS4 and CS5 so when I started using CS6 I have never really been comfortable with the hover scrub for anything serious. Not yet anyway.
I figure that all of the clips will end up in the Source Monitor anyway before they hit the timeline, so why not put them up there and as I finish with each one I close that window and start on the next one.
Those of us who go back to when Premiere became Premiere Pro have been waiting for some of these features a very long time. Slap-your-head it might be to you or me, but Adobe only has so much money to pay engineers and there is always something more important to work on. Like becoming codec agnostic or handling huge frame sizes. Adobe has borrowed many features from FCP, but it is still a work in progress. We just submit feature requests and attempt to convince others to do the same. You can't imagine how much time we spent a decade ago getting people to create the proper sequence. Now you just drag a clip to the New Item button and your sequence is perfect. That is magic to someone like me, who taught people how to use Premiere Pro 1.5 by copying FCP tutorials and recreating them in Premiere Pro (for Lynda.com) using the same footage.
Jim Simon is often quite vocal about things he would rather see done that some of the requests. I agree with him most of the time, but every now and then a little thing I think should be done is not on his list and he will let me know in no uncertain terms why he thinks what he thinks. He can be pretty persuasive and it is difficult to argue with his logic. The Adobe folks read these forums, yes, but they read the feature requests and look to see how many customers want certain things done. Not a bad way to prioritize. Now that more FCP people will be submitting requests, there is a good chance that you will see more features that you want.
So, while it may be obvious to you, it isn't obvious to Adobe until the masses speak. I suggest that you might want to consider being a rabble rouser, getting like minded people to put in the same requests. That is probably the best way to get what you want.
As for going in reverse.... I think that if you have never had some of these things, they are not important to you. They are not all like adding reverse. Some are but some of these are like the tailfin on the 1959 Caddilac. The higher the better back then. But are they necessary?

CS5 Bridge stutters

I upgraded from CS4 to CS5 with no
issues. I can open both the 32 and 64 bit version of PS with no issues.
But when I open CS5 Bridge, the PC slows and my mouse stutters. My processor meter jumps up to 50% and then down to zero...like its stuck...and will continue to do this until I close bridge...and then all is fine.
I have 8GB of memory and have tried all forms of settings in the PS memory allocation, cache sites, etc...nothing changes.
I have tried resetting bridge using the CNTRL command on opening. I have tries manual removing cache loacstions, etc.
All with no change.
I even tried removing and reloading CS5...no change.
Anyone have any ideas?
I have a case open but the PFD response "every two days try this" is getting really frustrating!!!!

Dear Customers,
I am Baichao, Adobe Bridge Quality Engineer.
Bridge team is investigating this error, In order to reproduce the problem in our lab and find a solution as soon as possible, I would like to ask you to help providing more information, please follow steps below,
1. Download "User Mode Process Dumper Version 8.1" from
http://www.microsoft.com/downloads/en/confirmation.aspx?familyId=e089ca41-6a87-40c8-bf69-2 8ac08570b7e&displayLang=en
2. Install "User Dumper" following Microsoft's article
http://support.microsoft.com/kb/241215
3. Open "Control Panel -> Process Dumper", switch to tab Page of "Processing Monitoring"
4. Click button "New", input "Bridge.exe" for "Application Name".
5. Select "Bridge.exe" from list box, then click button "Rules",
                Select "Use Custom Rules",
                Browse to a custom dump file folder,
                Check "All Exceptions",
                Check "Ignore Exceptions that occur inside Kernel32.dll",
                Select "Mini Dump Type" to "Small"
                Select "Save Mode" to "Cyclic Saving 5 times"
                Others keep uncheck or unselect.
6. Click "OK" button to exit "Rules" setting dialog, then Click "Apply" button, then click "OK" to quit "Process Dumper " dialog.
7. Launch Adobe Bridge CS5, do your work.
8. when Bridge hang, wait for a while, then kill bridge using "Task Manager", please check if there any ".dmp" file in "custom dump file folder " which is set in step 5, if so, please zip all .dmp files and FTP to us (please contact me at [email protected] for FTP info). It would be better if you can repeat your hang and send us more zipped .dmp files.
Sincerely appreciate if you could provide us your workflow before Bridge throws that error message, what file formats you use, what features you use and your machine information.
Best Regards,
Baichao Li

Soft Proof view mode problem for MOAB Slickrock Metallic Pearl Paper

I use the Soft Proof mode in Lightroom (LR) for editing printed output, and use either custom color profiles that I make (Spyder Print) or profiles supplied by the paper manufacturer. This feature works very well, much like the Custom View mode in Photoshop (PS). MOAB/Legion makes a neat paper called Slickrock Mettalic Pearl, that mimics the old Cibachrome prints, and the supply a color profile that works well in PS. However, when I toggle on the Soft Proof mode using this profile in LR, the image goes completely white, except for deep blacks which show up as bright green. When I actually make the print from LR, the print comes out okay, but there's no way to know if it's true to the proof view, since the proof view is unusable.
Viewing, editing and printing the same image in Photoshop (PS) 5.1 works fine. Editing and printing when view mode (Proof Setup > Custom) is to the same profile produces a print that's true to the proof view. So it seems that the problem is between LR and the .icc file. Here's the link to the profile file: Go to MOAB Slickrock Metallic Pearl Epson R2400 EPL.icc.
http://moabpaper.com/icc-profiles-downloads/epson/epson-stylus-photo-r2400/
iMac; OSX 10.7.5
LR 4.2
Photoshop CS5 12.1
Printer: Epson Stylus Photo R2400 (Photo Black ink)

Looks like a compatibiitly issue with Adobe LR soft proof:
http://moabpaper.com/display/Search?moduleId=3387293&searchQuery=Lightroom+soft+proof
...and PS soft proof:
http://moabpaper.com/moab-support-forum/post/2109935#post2144949

View Modes - Day-Week-Month

Does anyone know of any way to add a quarterly view mode? (in otehr words being able to see 90 days at a time as an added view option - Day/Week/Month/Quarter)
If not, are there any third party workarounds that can modify and provide a 90 day view mode in iCal?
At the very least is there any EFFECTIVE way to communicate and get this easy enhancement added to the upcoming version of iCal.
It is incredibly inconvenient to have to move calendar items to the following month with the restrictive view of only one month. IN other words, if I wanted to move an appointment from February 24 to say March 20 I am forced to manually open the item and type in new dates.
A great system program known as DateBook Pro 4.0 had such a view option and I absolutely miss it EVERY day!

I am experiencing the same symptoms - Day, Week, Month and the Today button are all grayed out. It particularly seems to happen if I've left iCal running overnight. The only way I've found to fix it is to re-start iCal. When this is happening, the only way to navigate to a different week (or month) is to use the menu "Go to date" function. I think the onset of this problem relates to an Apple software upgrade , but I can't be sure which one.

REQ: Add 'Fit-width' or 'Fit-visible' view mode, in which the zoom level is automatically set based on the width of the _current_ page.

Currently, the default zoom level when viewing a page of a PDF file is automatically calculated based on the width of the "widest" page of the document. This means that, if the document contains one page that is wider than the others or is in landscape orientation, then the default zoom, when viewing all the other narrower pages, is set in a way so that the page does not use the full width of the screen. This results in very poor experience, because the zoom level and the visible area of the page have to be constantly adjusted for each page. The latest update (at the time of writing) has added some extra view modes, but not the much needed 'Fit width' or 'Fit visible'.
Personally, I can find no reason valid enough to justify the lack of such a view mode. Automatically setting the zoom level based on the width of the current page so as to take advantage of the full width of the screen should be a must have feature for mobile devices, if not the default behavior. The current default behavior regarding the zoom level is pretty much useless, even on 8"/10" screens. There should be a view mode in which the full width of the screen is always used to display the document.
Examples of documents for which the Adobe Reader for Android provides a poor reading experience are:
documents which contain some of their pages in landscape orientation.
publications which, apart from the main content, also contain the full front and back cover in a single page (usually first page which is much wider than the content pages) or any other extra pages like cards or application forms (that are meant to be printed) which usually use an A4/Letter page size etc.
documents which have been cropped by external utilities or scripts so as to eliminate unneeded white margins (in some cases not all pages have the same width).
Please consider fixing the default behavior in future releases of the Reader for Android or add a 'Fit width' or 'Fit visible' view mode.
Thank you in advance.
Message was edited by: George Notaras
Improved descriptions of example documents.

To add to this, if you prefer you can separate your JavaScript from your JSF pages.
Add a folder (I named mine 'js') to your application's ViewController project's public_html folder.
Via JDeveloper, create a new JavaScript file inside your newly created folder and place your JavaScript functions inside it.
You can then 'load' the .js file using the method Shantala described, with the addition of an added 'source' property to the af:reference tag.
(This can also be a URI reference to a JavaScript file hosted on a web server)
<f:facet name="metaContainer">
<af:resource source="/js/myJsFile.js" type="javascript"/>
</f:facet>The benefits of this 'split' are cleaner JSF page source and also code-highlighting and formatting within the .js file making finding and fixing bugs in your JavaScript much easier.
It appears however, that when using <af:resource> to load scripts, once the page has been submitted even once, the JavaScript is no longer available to the page. Which isn't very useful.
A solution is to use <trh:script>.
Add xmlns:trh="http://myfaces.apache.org/trinidad/html" to your <jsp:root> tag and install the library.
then in place of the above code use:
<f:facet name="metaContainer">
<trh:script id="script1" source="/js/myJsFile.js"/>
</f:facet>Now after a page submit the JavaScript still functions.
Edited by: Matthew Carrigy on 12/08/2009 10:39

Mouse no longer scrolls photos in 2 view modes

In A2, if I hovered the mouse over the strip and used the wheel (Revolution MX) it would scroll the thumbnails. If I hovered it over the selected, large photo I could scroll through one-by-one. Same in Viewer mode-scrolling up or down went to the next or previous photo. Now it only works in Browser mode or in the strip in Split View. This has ruined my whole workflow of rating with my left hand while scrolling with the mouse in the right.
I've checked the settings I know, such as Primary on or off, with no luck. Any help would be appreciated.

Yes, it looks like scrolling has been changed as you describe.
Dont forget that the arrows and numeric pad (if you have a full size keyboard) work very well. I find rating to be a one handed job using a thumb on the right arrow and a finger for the rating value. Its fast after a bit of practice.

Canon 6D will not focus or flash in "Live View" mode.

My Canon 6D will not focus or flash in "Live View" mode. I have a canon 430ex II and a E-ttl flash connected with a sync cord for E-ttl function. The camera does simulate shutter action, but no photo is taken. How can I over-come this problem.
Once in a while, after trying to take several photos it will start working, but usually not.
Solved!
Go to Solution.

Hi Shadowcat!
Thanks for posting.
It sounds like the AF Method is set to Quick Mode. When the camera is set for Live View Shooting, there are different AF Methods that can be set. In Quick Mode, the camera uses its dedicated AF sensor to focus when you press the shutter button down halfway.
The image on the LCD will be interrupted while the camera tries to focus because the shutter closes and the mirror drops back over the image sensor. This may look as though the camera is taking a picture, but it is not, it is only focusing. No flash is fired during this process either. Continue to hold the shutter button halfway until focus is achieved, at which point the image will return to the LCD. Then you can press the shutter button the rest of the way down to take the picture. The flash will fire and an image will be recorded.
This didn't answer your question? Find more help at Contact Us.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

Remote Panels not working in embedded viewing mode

Hello,
I'm trying to develop a web version of my project using Labview remote panels. I configured the web server properties as it's described here: http://www.ni.com/white-paper/4791/en/
Currently I'm trying to create the web page on the web publishing tool. However when I select the Embedded viewing mode option I get an "Requested VI is not loaded into memory on the server computer" error on the web page that is created. But if I select Snapshot or Monitor viewing mode option the page is loaded without problems.
I'm using Labview 2013 and oppening the web page in google chrome. The VI from which I'm trying to create a remote panel has some subVIs that show the front panel when called. Is there anything I'm forgetting to configure, or do I need to have any plugins instaled on my browser?
Solved!
Go to Solution.

Mateus23 wrote:
I'm now developing the web version in HTML 5, using web services to comunicate with my labview application.
There you go, good solution. When doing this remember that you have access to the database on the server. A structure I have found effective is to use the server DB like a dropbox that I write to, and the web server reads from.
Mike...
Certified Professional Instructor
Certified LabVIEW Architect
LabVIEW Champion
"... after all, He's not a tame lion..."
Be thinking ahead and mark your dance card for NI Week 2015 now: TS 6139 - Object Oriented First Steps

Adding a link to another page in View Mode using Destination URI

Hi All,
I have the Search items page in iProcurement, and the Supplier Name is a text field in the search results region. Now I want to display the Supplier Name as a link, clicking on which the user should be taken to the corresponding Supplier details page in View Mode.
Is this something that can be done through personalisation, as in without extending the controller etc. I tried by giving the url of the supplier page in the Destination URI of Supplier Name, and it navigates to the supplier page, but how do I implement the functionality of querying the details of the Supplier in context. That is, what is the url that needs to be used, and what are the parameters that need to be passed etc? What is the approach to implement such a functionality. I have done OAF development, but havent done any personalisation.
Thanks
Anish

Hi,
I have a custom inventory report where I have a header region with the From Date and To Date column. The user enters these two dates and the data is displayed in the Table region between these two dates. Then in the item column I have a URL link which takes us to the Detail page. I need to pass the item number and the From Date and To Date in that link so the where clause can be set for the detail query. The attribute value for the item passes fine but I do not know how to pass the value for the dates. My URL looks like as below. I have tried different ways as mentioned in metalink or google search but no luck. Tried to capture the value also and it shows as the value as ‘$FromDate’.
OA.jsp?page=/xxbn/oracle/apps/xxbn/consignment/webui/ConsSaleDetailPG&ItemNumber={@ItemNumber}&FromDate=$FromDate&ToDate=$ToDate&retainAM=Y&addBreadCrumb=Y
I would appreciate if I can get some light on this.
Thanks in advance.

How to sort clips in icon view mode in Premiere

I am trying to sort clips alphabetically or by metadata in the icon view mode. When I switch from list view to icon view, premiere seems to arrange the clips randomly, not even alphabetically, which is frustrating because I can't even see the entire clip name. I love icon view mode, and it's nice to be able to drag the clips around, but I would like even more to be able to sort them.

You can't sort in Icon view as their are no 'columns' to sort by. All you can do is move then around manually.

I cannot find a way to sort the bookmark folders themselves alphabetically by name.I am not talking about in a view mode but in the way they are displayed when I click on my bookmarks tab. Can someone explain to me how to accomplish this.

I have a lot of various book mark folders with websites contained within each folder. I am able to sort the websites within each folder alphabetically by name but I cannot find a way to sort the bookmark folders themselves alphabetically by name.I am not talking about in a view mode but in the way they are displayed when I click on my bookmarks tab. Can someone explain to me how to accomplish this other than manually dragging them as this is extremely hard for me due to the fact that I am a quadriplegic with limited hand movement dexterity

Bookmark folders that you created are in the Bookmarks Menu folder. "Sort" that folder.
http://kb.mozillazine.org/Sorting_bookmarks_alphabetically

Upload functin works in Edit mode but not in View mode

I am using the Oracle AS 10g PDK to integrate struts application into Portal. I found the upload function works fine in portlet edit mode, but it doesn't work in view mode (Go to the "The page cannot be found" and URL is "http://servername/portal/page"). Does anybody know the reason.

Hi there
Can you post a screen capture of what your Timeline looks like?
Odds are your Click Box is pausing in a weird place.
Cheers... Rick
Helpful and Handy Links
Begin learning Captivate 5 moments from now! $29.95
Captivate Wish Form/Bug Reporting Form
Adobe Certified Captivate Training
SorcererStone Blog
Captivate eBooks

CS6 Bridge always launches CS5 Bridge

After installing CS6 from Cloud upgrade, when ever I launch Bridge CS6, it always just launches the CS5.x version of Bridge.
I've tried both 32bit and 64bit with the same results. My other CS6 apps seem to be working fine.
This occurs no matter which Bridge CS6 icon I use (shortcuts and from the main directory.) Do I need to uninstall CS5 Bridge to get it to work?

No do not uninstall CS5.
You have Bridge CS5 running the the background. Open CS5 Bridge and go to edit/preferences/advanced and uncheck "open Bridge at logon".
Then open Task Manager and click Processes tab. Look for bridge.exe and close it.

CS5 Bridge view mode

Similar Messages

Maybe you are looking for