CS5 Brushes Palette doesn't save brush settings when browsing

Okay, this is a weird one.
When I open the Brush Palette (F5), it shows me the settigns for the current brush (nothing new here) but when I choose another brush (from the Brush Palette NOT from the menu at the top of the screen), it has the same settings and the same checkboxes (Textures, Dual Brush etc.) enabled as the previous one. Even if the second brush is not supposed to have them enabled. What is causing this? Please help.
I have the latest updates and the lates Wacom drivers installed.

Yeah, that was the problem. I didn't notice that I'm changing the tip. How silly of me.
Thank you very much!
One more little question.
When I click with the mouse to change the brush from the arrow at the top of the screen it isn't showing the pressure sensitivity on the stroke thumnails of the brushes for the whole session. However, when I click with the tablet it's showing them (again, for the whole session).
Is it how Photoshop works or is it some issue with the Wacom drivers? The versions before CS4 doesn't have this "issue".

Similar Messages

Firefox doesn't save the settings

As the question might say this version of Firefox (5.0.1) doesn't save the settings u do to it...For example my problem is with the toolbar and the buttons i add to it...i have tried to customize it as i previously had it in the earlier versions of firefox but it doesn't save them...i need to customize them from the beginning whenever i close and open firefox...even when it updates the add-on's and restarts it still needs to be customized...i have also checked many forums and apparently i am not the one having the same problem...some also can't save the bookmarks but that is not my case...i have recently downloaded a Premuimplay Codec-c add on and also a Facemoods and maybe ththose interfere with firefox even though i doubt it
The addon's that i definitely wanna keep on the toolbar are IMTranslator,WOT,Read It Later,Save-To-Read,ADBlock Plus and also the Home button never stays in the place i move him when i customize the toolbar
Regards
Albi
PS:(some add-ons don't work with firefox 5.0.1 but i guess thats the developers problems right?

Firefox 4 saves the previous session automatically, so there is no longer need for the dialog asking if you want to save the current session. 
You can use "Firefox > History > Restore Previous Session" to get the previous session. 
There is also a "Restore Previous Session" button on the default about:home Home page.
Another possibility is to use:
* [http://kb.mozillazine.org/Menu_differences Firefox (Tools) > Options] > General > Startup: "When Firefox Starts": "Show my windows and tabs from last time"

Synaptics touchpad doesn't save scroll settings after Windows 10 upgrade

Since the Windows 10 upgrade (upgraded from 7), the Synaptics Touchpad does not save scroll settings. Every time I shut down and restart the machine the next day, I have to go into settings to re-enable touchpad scrolling. It's always unchecked on restart. Please advise on how to fix this!

My solution, copied from one of many threads regarding this problem - You have Synaptics Port Touchpad driver installed via Windows Update. Here's is a work around until a fully Win10 compatible driver is issued. Win+X/ Device Manager/ Mice and other pointing devices/ Synaptics PS/2 Port TouchPad. R click/ Update Driver Software/ Browse my computer for driver software / Let me pick from a list of device drivers on my computer. Select the top or latest version of Synaptics PS/2 Port Compatible Touchpad Version 19.0.12.95 (7/15/2015) / Next and driver will install automatically. Reboot to finish install. Go to Settings/ Mouse Properties/ Synaptics Device Settings to access Touchpad settings, adjust to your liking/ Apply/ OK. Advise to tick 'Static tray icon in taskbar' for easy access to the settings tab until you're completely happy. This 19.0.12.95 is the latest one on the HP site for my model (your # may vary) and it installs 2 versions. The one Windows Update uses is the same date Port Touchpad version but the 'Compatible' one is installed at the same time. You can tell the difference immediately because it allows you to create a profile. The old 8.1 version did not and neither does the 'Compatible' one. The touchpad setting screens look the same as before (you'll notice the new one looks different and 3 finger press opens Cortana). Why do I consider this a workaround ? Because the 3-finger press app setting, one finger EdgeMotion and demo vids do not work. But at least you can set the scrolling, pinch zoom, speed and sensitivity to your liking and if you reboot, you'll see the system tray icon and your preferences have stuck. Hope this helps somebody !

Cant save google settings when useing firefox

when i go to save prefrence settings in goole it only saves until i close the page . what iam trying to do is Do not provide query predictions in the search box. ihave tried inabling cookies in option but still wont work can you please help as i want io reinstall firefox 3.6 or latest.
kind regards chris.

Try to clear the Google cookies: Tools > Options > Privacy > Cookies: "Show Cookies"
* Make sure that you not run Firefox in [[Private Browsing]] mode
* You are in Private Browsing mode if you see "Tools > Stop Private Browsing", possibly grayed
Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]]

ITunes syncing doesn't save all settings

Not sure if this belongs in the developer forums, but I couldn't find a good place for this question over there.
Basically, I'm running the iOS 5 beta on both my iPhone 4 (GSM) and my iPad 2 (Wi-Fi). I sync pretty regularly, and even use the iCloud backups, which seem to be working pretty well.
However, I run into this major issue each time I have to restore the devices when updating (that is, when OTA updates don't work...which happens from time to time). I sync RIGHT before I restore, to hopefully ensure that everything is preserved, but when I finish the restore, iTunes seems to forget all my settings. It attempts to sync apps that were either previously removed from my device, or apps that were never on it to begin with (this happens moreso on my iPad wherein it seems to think that a few of my iPhone apps belong on it, when they were never on my iPad to begin with).
My folders are never preserved, random settings are undone, and twice its lost a few days worth of photos. It doesn't even back up app settings. I have several games where weeks upon weeks worth of progress have been lost.
I don't understand what's going on. It's as if there's no point to syncing at all because nothing gets backed up. Has anyone else run into this problem? I'm using the latest betas for iTunes and iOS, and have been part of the dev program since iOS 5 beta 3.
I know it's beta software, and that "bugs may happen", but this seems like a larger iTunes syncing issue whereby it simply refuses to do what it claims to do.

Well repairing permissions through disk utility didn't work.
In the end I converted the file to AAC from within iTunes and I was then able to edit & save info field again. I know this is not a fix but it is a usable work-around.

Premiere Pro CC doesn't save my settings.

None of my settings save, such as custom bins and window display settings. Also, the "open recent item" list does not populate. I try to upload my sync settings and still no luck. I have an adobe account and my subscription is "Creative Cloud for teams"

I have the same problem. Any solutions yet?

HD IDT Audio doesn't save my settings

Hi everybody, I have a HP Pavilion DV6-1277LA, is kind of old laptop, but I just upgraded to Windows 10 and it runs flawlessly, but I'm having problems setting up my sound. When I adjust the SRS settings they doesn't stick, for example, I set up SRS TruBass to 60% and if I go to the eq and then go back to the SRS settings, it is again on 0%, also I don't have any eq presets as I used to have in Windows 7. Everything I adjust goes back to its default values, hope somebody can help with this and thanks in advance!

I have the same problem. Any solutions yet?

Firefox opens in offline mode and doesn't save my settings

When I start the internet, it always starts in "work offline" mode. So I have to un-check the work offline button and refresh the pages. Also, my customized toolbar settings are not saved. I add the tab group button and it isn't on the toolbar when I open firefox.

Try to create a new Boolean pref with the name network.manage-offline-status and set the value to false.
Right-click on the about:config page to open the right-click context menu and use "New > Boolean" to create a new Boolean pref.
Name: network.manage-offline-status
Value: false
To open the about:config page, type about:config in the location (address) bar and press the "Enter" key, just like you type the url of a website to open a website. 
If you see a warning then you can confirm that you want to access that page. 
* http://kb.mozillazine.org/about:config

Firefox does not save my settings when I reboot

I have Windows 7 Ultimate. I was having problems with Firefox 3.6.16 crashing to the point where it wouldn't work. I uninstalled it and downloaded version 4 but had problems with it hanging all the time. I went through the help section, one of the things I did that was recommended was to delete my sessionstore files and any extra copies. I think there were three of them. I deleted them all but Firefox 4 still was hanging.
I uninstalled 4 and reinstalled 3.6.16 again. Everything seems to be working okay except when I reboot or restart my computer it does not save all of my password logins or any special settings on websites I visit all the time. So every time I start my computer I have to log into all my sites again, and I have a lot of them so this is really a pain. I'm not sure if this has to do with deleting the sessionstore files or not. I checked and I do have one sessionstore file instead of three.
Not sure what else to try. If I leave my computer on I stay logged in to all my sites and my preferences on those sites are maintained. Anyone have any idea what's going on?

I have tried to make a backup of the bookmarks file. Renamed the old one and called the backup "bookmarks.html".
The places.sqlite file is not "secured" (there does not exist a "locked" attribute in the general tab on the Mac), so I assume it is not locked.
Nothing seems to work. Possibly I can best uninstall Firefox and try to reinstall it, or does that not solve the problem.
Otherwise I go back to Safari :-)

Brushes palette in CS3 hard to move on screen

A coworker and myself have noticed that after upgrading to illustrator CS3, the brushes palette acts very slow and sticky when trying to reposition it onscreen. Hers will even temporarily disappear when she tries moving it, and reappear a moment later. Is there a fix for this?
Thanks.

Doesn't seem sticky on my work station. Does it make a difference if you are in "thumbnail view" or "list view?"

[SOLVED] kgpg doesn't save settings

Hi,
I've a problem with kgpg: It just doesn't save my settings. Everything that I change (e.g. setting a default key or a key which should always be used for encryption) gets lost when I restart kgpg.
If I start kgpg in a terminal and change something I get the following message:
kgpg(14795)/kdecore (KConfigSkeleton) KCoreConfigSkeleton::writeConfig:
That's it. I just found one config file in
~/.kde4/share/config/kgpgrc
And I'm the owner of this file and have full read and write access to it.
Does anybody else have this problem or knows how to fix it?
matse
Last edited by matse (2011-06-14 20:37:27)

So small update:
I signed a bug report https://bugs.kde.org/show_bug.cgi?id=275644 and the KDE team could help me, in fact the file "~/.gnupg/gpg.conf" did not exist here on this machine, I created a blank one and now kgpg can use it to write the config to it and everything works fine.
matse

In photoshop CS5, Brush tool doesn't work on an adjustment layer

In photoshop CS5, Brush tool doesn't work on an adjustment layer

I Created an adjustment (Curves) layer and did the curves adjustment. Then I did an Edit Fill (Normal Mode, 100% Opacity and Use: Black).
I then try to use the brush tool, but it doesn't work. I've done this hundreds of times before and suddenly it's not working. Rebooted the system, but that didn't help.
I know how to do a screen shot, but it doesn't paste onto this screen. How do I get that to you?
thanks for your help

Custom Brush sets don't save to dropdown menu

Hey! I was wondering if someone could give me some advice on saving brush sets. I've recently upgraded from Elements 7 to PS CC and the way I saved brush sets in Elements doesn't seem to work in CC.
I can make and save a brush set fine. I save it in C:\Program Files (x86)\Adobe\Adobe Photoshop CC\Presets\Brushes alongside the default "Assorted Brush" and all the others, and I can load them into an existing default set.
They never appear in the dropdown menu though. I've tried saving through the preset manager and the dropdown menu and saving them over an existing brush set but it reverts to the old brush preset as soon as I changed between default sets.
On restart, they stay in the brush set if I load it before closing.
Can't get it to work no matter what I try. What am I doing wrong? :S

Ah, that makes sense, coupled with the fact that the entire menu for external Speedlite control isn't available if no flash or a non-compatible flash is attached.
Here's Canon's response. Its a firmware bug after all, but hopefully can/will be fixed in the next firmware:
We appreciate your continued correspondence regarding your EOS 5D Mark III, EOS 7D, and Speedlite 580EX II.
Thank you for your response. Tests were performed with the EOS 5D Mark III, EOS 7D, and the Speedlite 580EX II to duplicate the problem you are encountering. Surprisingly, by following the settings you stated in the forum, we were able to duplicate the problem with our equipment too. I have submitted a notification to our engineers who will look into the matter further and hopefully a future firmware update may be released to fix the problem. I apologize for any inconvenience this may have caused.
Please let us know if we can be of any further assistance with your EOS 5D Mark III, EOS 7D, and Speedlite 580EX II.
Thank you for choosing Canon.
Sincerely,
Rodney
Technical Support Representative

Brushes & patterns won't save...

I have photoshop cs3 extended. I have tried everything, but I will upload my brushes and patterns and when I close the photoshop or restart my photoshop the brushes are gone. I add the brushes from imagepacks, it's always done it, but its getting a little exausting adding them everytime I am working with photoshop. What can I do to fix this? Thanks!

From the palette flyout menus choose Save Brushes (or whatever) and Save them someplace with a name. Then when you load them they should stay.
One place you could save them to is the appropriate folders in the Presets folder.

In CS5 can I find out which brush is currently in use so that I can slect it again later?

in CS5 can I find out which brush is currently in use so that I can slect it again later? I can't figure this out

Chris, I just ckecked and realized that the problem is only with CS5 64bit, I'm on windows 7. CS5 32bit works as you described.
However even if it worked this doesn't help me anyway. I constantly change the size of the brush because I mostly paint but still need to know which brush preset I selected last. Please make a feature that highlights the last brush preset used - may be in a different way (color) if it doesn't match the current brush. It is real pain to find the needed brush. I have hundreds of brushes showing on my 30 inch monitor and I need them all. I spend a lot of times looking for recently used brushes. You can also implement recently used sorting order. I hope this is not very difficult to implement. Im sure that a lot of artists use many brushes like me, just look at all Photoshop painting instructions videos, even the tutorials are boring when watching how long it takes to find and select the needed brush.

CS5 Brushes Palette doesn't save brush settings when browsing

Similar Messages

Maybe you are looking for