CS5 cant open the file as it may not be recognised or missing plugin?? HELP!

This is the warning message i keep getting the file is a PDF and was saved on the program Nitro Pdf i have since deleted the programme and want to open the file in InDesign but keep getting this box any ideas?

InDesign cannot open PDF directly without the PDF2ID plugin from Recosoft. You woudl normally PLACE a PDF file the same way you would place an image.

Similar Messages

  • Error Message.."Couldn't open the file. It may be corrupt or a file format that Preview doesn't recognize."

    Hi, This may be a common problem, I've browsed through posts here...anyway help required please! This morning I downloaded 108 photo's from my Canon EOS1000, same as I've ever done for the last few years. They seemed to load okay as they have always done, but just five minutes later I tried to open them and had this dreaded message  "Couldn’t open the file. It may be corrupt or a file format that Preview doesn’t recognize." I've checked file extensions etc. and they're all JPEG's - and the information on each photo looks similar to photos' in the stuff I downloaded last week.
    Have I lost these photo's? Can they be retrieved? Of course I selected the "delete photo's from camera option on downloading.....
    Any help greatly appreiated
    Bill
    Kent
    England

    gambo74, Welcome to the discussion area!
    It sounds like the drive directory is corrupted.
    Boot from the DVD that came with your iMac. Open Disk Utility and repair the hard drive.

  • Firefox doesn't print or open preview, when I select print preview I get the following error: Couldn't open the file. It may be corrupt or a file format that Preview doesn't recognize.

    Firefox doesn't print or open preview, when I select print preview I get the following error: Couldn’t open the file. It may be corrupt or a file format that Preview doesn’t recognize.
    However, when I print from Safari or another program, I have no problems
    == Yesterday

    The only solution to corrupted files is to restore from your back up.
    Regards
    TD

  • TS2776 Outlook cannot open the file because it is not associated with the default identity.

    Outlook cannot open the file because it is not associated with the default identity.

    I've had the same problem. Even though you check the box to save it as Keynote '08, it does not open in ')8 (I get the same message)...you need to reopen it in '09.
    I have even changed the name of the file in '08 and eventually get the same message.
    I believe that once you open it in '09, you're committed to that.
    Let me know if you have better luck.

  • Cant open the file

    hi guyz,
    i am trying to open the  file (.txt) using program but i cant for some reason..when try wid run .....the file is there in specified location...
    sy-subrc = 8.
    code:
    OPEN DATASET p_file FOR INPUT IN text mode .
      IF sy-subrc = 0.
    Upload data from FILE
        DO.
          CLEAR tab_data-line.
          READ DATASET p_file INTO tab_data-line.
          IF sy-subrc NE 0.
            EXIT.
          ENDIF.
          APPEND tab_data.  CLEAR: tab_data.
        ENDDO.
        CLOSE DATASET p_file.
      ENDIF.
    plz advise

    Hi,
    It sounds that you are trying to read the file on presentation server as you specified that you had checked whether the file is there or not using RUN.
    So if it is regarding presentation server then go for GUI_UPLOAD function module which is used to upload file  present in presentation server.
    [Sample code|http://www.experts-exchange.com/Database/Software/ERP/SAP/Q_21278801.html]
    For both presentation file and Application file check the below link....
    [Presentation & Application files example|http://www.sap-img.com/ab004.htm]
    Check this thread as well....
    GUI_UPLOAD
    Coming to the code what you written.....
    You are closing the file iff SY-SUBRC EQ 0. that should not happen as you had opened independent of any condition you have to close that independently.
    Hope the information provided would help you.
    Regards
    Narin Nandivada

  • I downloaded ITunes and now I tried to open the file, and it is not supporting the file

    I downloaded ITunes on my galaxy s4 and tried to open the file and it says it is not supported

    Errr, this is a Adobe Lightroom user to user forum, do you have a question about Lightroom?

  • Adobe reader could not open the file because it is not supported or the file is corrupted

    can you give me the answer to my problem

    What is your operating system?  Reader version?
    The file in question is a PDF?  If yes, open the file in a text editor, then copy and paste the first few lines back here in the forum.

  • Ive installed the programme but cant open the file?

    Ive installed a free trail to my Windows 8 but I have a shortcut on the desktop but it just takes me to the Creative Cloud Apps page on my computer and wont let me open Premier Pro to create a project! PLEASE HELP ME

    On my Start there is only a shortcut to Creative Cloud where it takes me to a list of all the apps Ive installed and how to upload work online, rather than allowing me to open the software.

  • Hi. I'm getting a message adobe reader could not open the file because its either not a supported file type or because the file has been damaged. Any ideas what to do please? thank you

    Does anyone had the same problem?

    ednaroddy wrote:
    Does anyone had the same problem?
    If you search the forum you will find that the same problem is posted multiple times every day.
    You will also find that the reply is always the same: see http://helpx.adobe.com/acrobat/kb/pdf-error-1015-11001-update.html

  • HT3775 I want to open a download a file to listen the music but I can't open the file. what should I do?

    Hi,
    I need to open the file, but it is not opening could you please help me out.

    The paucity of details is amazing. Computer, OS, file type, etc. will go a long way in getting a solution.

  • HT1386 please help me to make synch between my computer and iphone , on the file tab it is not possible to click, thanks

    my dear,
    please help me to make synch between my computer and iphone , on the file tab it is not possible to click.
    appreciate your help and thanks in advance.
    regards
    hesham

    You can't
    Apple has never approved a method to downgrade iOS
    Allan

  • I am running InDesign CS5.5 and trying to open an In Design File but getting an error message. " Cannot open the file "PDavidLCover.indd". Adobe InDesign may not support the file format, a plug-in that supports the file format may be missing, or the file

    I am running InDesign CS5.5 and trying to open an In Design File but getting an error message. " Cannot open the file "PDavidLCover.indd". Adobe InDesign may not support the file format, a plug-in that supports the file format may be missing, or the file me be open in another application."Please help I really need to get this file open.

    Since you've shown us the folder contents it's a good bet it isn't in use (no lock file). And it doesn't look like the file is mis-named as there doesn't seem to be anything else there that would be the .indd file (but just in case, open it in TextEdit and paste the first few lines here so we can see what the file header says), so the most likely case is the file is damaged. Is that on a removable device of some sort?
    You can try the tool at Repair corrupt InDesign Adobe files on Mac OS X  or send me a link to the file by private message and I'll try the recovery tool I have for Windows.

  • A FCP user gave me .mov's that PP CS5 cant open, what can I do? (File link enclosed)

    A FCP shooter gave me .mov's that PP CS5 cant open, what can I do? I guess she rewrapped the files because as they try to import into cs5 a FCP loading diologe box opens stating: Importing FCP XML.... Afterwards it says i dont have the codec necc.
    I'm PC based only.
    Here is a link to a short clip that can be downloaded.
    I'm really stuck here guys. Cant reach the shooter.
    The 5 second clip can be seen & downloaded from Vimeo:
    http://vimeo.com/27230969

    If you tried XD Decode you must think that they originated as XDCam then, right?  That is the codec I had to buy and once it was installed everything was transparent and normal. So I'm not sure what the crashing is all about, assuming your system meets the minimal tech. requirements. I'd give it another try if you haven't already.
    Your best hope would be to locate the original camera files, which could very well have been deleted following the .mov copying via the Mac. I've had no problem with native XDCam in Premiere.  The next best solution might be to have that FCP user do the conversions to another file format you can use. Hopefully there aren't thousands of them.
    Firstodd, that's very interesting that your Avid MC was able to work with those files. I just found this from an Avid doc of last year: "If you want to play the exported movie in QuickTime, you need to purchase a third-party QuickTime plug-in. Avid recommends the Calibrated{Q} XD Decode from Calibrated Software"
    Still, for the $80 I spent a year ago, XD Decode was well worth it in time saved. I see the price has gone up $50 since then though.

  • How do I resolve the issue Cannot open the file ".indd". Adobe InDesign may not support the file for

    How do I resolve the issue Cannot open the file ".indd". Adobe InDesign may not support the file format, a plug-in that supports the file format may be missing , or the file may be open in another application?

    Shouldn't the CC version be able to open any file created in an older version on InDesign?
    Yes, it ought to.
    If the older file wasn't yours (if someone emailed it to you,or burned it on a disc, or whatever), then I am almost willing to bet you a beverage in the city of your choice that it's not a complete InDesign file. That is, maybe it was zipped and renamed, or the beginning or end of the file was chopped off during download, or something like that. The only reason I'm not actually making the bet is that there is a remote chance that I'd lose, and maybe you're in Adelaide or Khabarovsk or somewhere where the cost of airfare to me would make that bet a very expensive bet for me to to lose. So no latte for you if I'm wrong!
    The script that Jongware posted will tell you what version of InDesign made the file to begin with. Additionally, if someone did something like rename YourFile.PDF to YourFIle.INDD, it'll report that it's Not An InDesign File. Because while SpectrumPCS is kinda right and that message can be generated when attempting to open a CS5 file in CS3 or whatever, it also spits out the same message when you just try to open an Autocad file, or a Windows system file, or a PDF, or any file that InDesign actually cannot open at all.

  • Adobe cant open the pdf it may be damaged or corrupted this happens for all pdf documents

    Adobe cant open the pdf it may be damaged or corrupted this happens for all pdf documents
    Steps to resolve
    Uninstalled and restarted the server
    Installed agan same error
    Uninstalled and restarted the server
    - Installed version 9.5
    - Same error

    Is this happening for brand new files downloaded from the internet?
    Or only for existing folders of PDFs on the server?
    Has the modification date changed on the PDFs?

Maybe you are looking for

  • Upgraded to Snow Leopard & am not able to launch PS CS3 extended. Says I need Java SE 6 runtime.

    I just upgraded to Snow Leopard (OS 10.8.2) from Lopard and am now not able to launch Photoshop CS3 extended. I get a warning that says: To open "Adobe Photoshop CS3," you need to install a Java SE 6 runtime. Would you like to check for and install o

  • My lumia 630 can't connect to wifi

    Please someone help me

  • C5 message srting by HOUR?!

    i have no idea if this is a bug or a feature, but in nokia c5, there is an option to sort by date, sender, type etc, but when it's set to sort by date, it actually sorts by hour. so messages 4 days old will be on top of the list if they have been rec

  • X6 Bluetooth connection with Nissan Note!

    My Nokia X6 connects very easily with my car, but that is all it does. I cannot make or receive calls, although it will ring through the speakers, I cannot use the car mic or speakers for the call. It will also tell me the number of anybody that call

  • List of values population based on session state

    Firstly, sorry if this is not too clear or just stupid, im new to this. What I am trying to do is create a list of values on a page that goes to a lookup table and returns description of the code entered. so far so good however the tricky bit is that