CS5 cropping A4 dimension images when printing with Artisan 1430

Image dimension: 297mm x 210mm
Printer settings: Borderless, A4 297mm x 210mm
Adobe printer settings: Printer manages color management, No centre, No fit to page
Result: lower portion of the image is cropped.
Adobe printer settings: Printer manages color management, centre image, No fit to page
Result: lower portion of the image is cropped.
Adobe printer settings: Printer manages color management, No centre, fit to page
Result: lower portion of the image is cropped.
When printing same image from paint 6.1, the entire image is printed to a borderless A4 page.
Please assist

For problems with full Photoshop it's better to post in the Photoshop forum. This forum is for Photoshop Elements, the consumer version:
http://forums.adobe.com/community/photoshop/general

Similar Messages

  • Cropped images when printing

    Every Word document that contains a image (jpeg in most cases) gets cropped on two sides when printed, even though print preview reflects otherwise.  These are not new documents and printed fine with previous printer (Epson).  Called tech support and the rep was stumped although I see many posts in the forum about this.

    Hi dlmott27,
    Welcome to the HP Support forums.  I understand that documents printed previously with another brand are not printing correctly with your HP printer.
    To better assist you, would you please provide some further information:
    1)       What make/model/product number of HP printer do you have? Guide to finding your product number
    2)      How is the printer connected (USB cable, ethernet, or wireless)?
    3)      Are you printing the documents from the same program that was used to print the documents before? If not, what happens when you print using the same program?
    4)      What operating system are you using?  Is it the same operating system that was running when the documents were printed previously?
    Thank you.
    Regards,
    Happytohelp01
    Please click on the Thumbs Up on the right to say “Thanks” for helping!
    Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
    I work on behalf of HP

  • How to create a gradient field in CS5 that doesn't striate when printed?

    Can someone explain how to create a large gradient field in CS5 that won't striate when printed? I created a poster, 18" x 24" in which the bottom third gradates from olive to black. When it prints there are thick paralell bands which are  undesirable. The tips I found online go back to 2009 which don't apply to CS5. The directions in the CS5 manual are confusing to me. Is there a simple way to do this?

    Is your monitor well calibrated?
    Did you print it locally on your own printer before sending it out?
    After you've exhausted everything else, you might consider creating a small test file with the offending gradient, and physically carry it to one of the printing locations, and speak to a technician there. Honestly, it sounds like a profile mismatch, but if this has happened at multiple Kinkos locations, then I agree, it would seem the problem is most likely in the file.
    Have you looked at individual channels? (R,G,B)
    One other idea: you say it's olive to black ... you could try an olive gradient from 100% opacity to 0% opacity, placed over a solid black layer, (or alteratively, a similar black gradient over solid olive) and see if that improves the output. Beware, some printers are really bad at 0%-5% values. If the gradient is going from 100% of one color to 0%, this might be contributing to the problem. Try going from 100% to 5% if this is the case.
    One last thing: can you post a portion of the offending area of the image here?

  • Color shift when printing with LR 3.6

    LR 3.6, win 7, screen Nec PA 241 W, Epson R 3000. When printing with colors managed by LR and paper/R 3000 profiles, I get prints with a strong color shift (printer pilot "mode" : desactivated) . How can I correct it ?

    You answered your own question: CS5.  There have been a slew of reports of workflows spun upside down when upgrading to CS5.  It may require updating your system software and/or Adobe applications, along with any printer driver updates that may be lurking out there somewhere.  The twist to your situation is ( and is very common ) that everything was working before and now it does not.  Or there is a certain print disorder of some sort.  Very troubling.  I wish I had a smoking gun answer for you, but I don't.  It sounds like you have a very viable workflow in place that worked before and damn well should perform for you now.  I'd stick with what works and dump what doesn't ( if you can ).

  • AutoCAD 2009 crashes when printing with HP Laserjet CP1525nw via wireless connection

    Printing to CP1525nw via wireless connection crashes AutoCAD 2009 on a WIndows 7 Home OS + Sony VAIO VPCL21M1E
    Works fine printing from any other application.

    I'm facing the same problem but, i'm AutoCAD 2012 and it crashes when printing with HP Laserjet CP1525n via USB or network cable

  • Black ink faded/Gray when printing with HP Envy 5530

    When printing with my new HP Envy 5530 the black ink looks gray or faded.  I tested the color and this prints dark and clear.  I have power cycled, plugged into different power outlets and re-inserted the cartridge.  Any thoughts...or could it just be a "bum" cartridge?
    Thanks in Advance for your help...

    Howdy. After tinkering around with my Envy having the same issue, I found out that after replacing my black cartridge because it was low, I was having the same issue.
    Turns out the color cartridge will simulate a black in an to preserve both the tri color cartridge and the black cartridge for as long as possible, which is why even if you've never printed any color, both your cartridges should be low. Once the color cartridge starts getting low, the printer doesn't have a sensor to realize which of the tri color is mixing in the most, so it continues to mix it in either way.
    I was having this issue where I would print one page and it would be okay and then any page following would slowly look worse.
    Long story short, just print without the color cartridge in and you shouldn't have the issue unless your black is really low. Replacing that should fix it overall though.

  • Image cropped off in margin when printing

    Using pages to create a postcard template. 4 images to the page landscaped. When I print the two images are cropped on the right and result in a larger margin on the right with part of images not printed even though the preview shows everything is okay. any ideas? It is like the printer is taking over the margins.

    Welcome to Apple Discussions
    Most ink jet printers, especially HPs, have a large trailing edge margin of at least .5". It is a hardware problem, not a Pages problem. Both of my laser printers print to about .15"-.18" all around. Your printer might have an option to ignore the margins or for borderless printing.

  • Borderless problem when printing with HP Photosmart K510A

    help me with this one HP support is closed today, are you experiencing this borderless problem if printing bordless a part of the image gets cut off when printing right now I'm printing in 4R the when I "print preview" the image is not cut off but when the actual output of print its cut off in all 4 corners maybe a few millimeters
    look at my watermark its cut off my aspect ratio is 3:2
    I printed it on a 4x6 paper (4R) they have identical aspect ratio I even tried to cropped to 4R still it gets cut off or is this an HP printer problem
    please help this is getting frustrating

    can anyone help me with this one?

  • Inverted images when printing pdf to Universal PDF driver

    Our company is beginning to use SSGD with two Windows XP instances (via RDP?). We deal largely with pdf forms that contain black & white bitmap image data. Within the SGD Windows instance, the pdf opens fine in Adobe Reader. Printing to any of the local printers configured on SGD is also fine. When printing to either of the Universal PDF print drivers (Printer or Viewer), however, the image portions of the document show up on the client side with inverted black/white.
    This occurs only for images embedded in the pdf. If I print the image as a separate bitmap file, it comes out fine on the client side.
    Any ideas?
    -dan

    what version of SGD and what version of Ghostscript do you have installed on the SGD server?
    $ tarantella version
    $ gs -V
    it may be that you have an older version of Ghostscript or not all the proper fonts installed
    http://docs.sun.com/source/820-6689/chapter5.html#d0e26763
    another thing to test is how the PS print job looks like before it gets converted by Ghostscript. You can pause the printing on SGD 'tarantella print pause' then look for the PS file on your Windows XP instance (c:\TEMP) is the usual location of the file. See if it is not being rendered properly. If it is not, then you would want to choose a different driver to use
    http://docs.sun.com/source/820-6689/appendix1.html#d0e49203
    try another driver and see if that makes a difference.

  • Document size error when printing with Acrobat XI Standard

    Hello,
    I seem to be having a problem when I try to print to my Colorwave 600 plotter, using Acrobat XI Standard. I am trying to print a 36" wide document, but for some reason when the printer receives the information, it thinks I'm asking for a 42" wide print. The biggest paper the colorwave can use is 36", so this is problematic.
    The sheet size in Acrobat is set correctly. The problem is only when the printer receives the information.
    If I select "print as image" in advanced settings, it prints. I'm just confused why this would happen, and why printing as an image would work? I would prefer not to print as image as it makes the text in my files jagged.
    I have tried wiping my print drivers and reinstalling, but this didn't help. Also, this problem only happens printing from a PC. It works fine if I print from a Mac.
    Any advice?

    My workaround by using a virtual PDF printer isn't as good as I hoped. If the files generated by printing with flashplayer exceed about 3 pages the temp file generated in /var/spool/cups is so big that it exceeds my partitions size.
    The file can get up to more than 1GB. With documents from one or two pages the temp file is about 500MB, the correct pdf gets generated after that and is placed under /var/spool/cups-pdf/<user> and is about 500kb small. The very big temp file get's deleted after that.
    Why is this temp file so big and how can I avoid it getting so big?
    Last edited by @op (2011-09-01 20:30:30)

  • Issues w/ color when printing with a layered background

    Hello,
    I have designed a page in Illustrator that was intended for the web, and now the company wants print outs for a trade show.
    I have a multi-layered background,  and when printing off a laser printer, the greys are awful and streaky. I have a feeling it's because I've got dark grey layered over light grey over green (see pic), but what can I do to fix it? The client wants the background this way, but I'm not sure about the mechanics of it, I just know that it looks awful when printed.
    Thanks for any help!
    Jen

    It's going to be tough to match the RGB work you've done for the web and laser printers are a challenge.  You might have to rebuild the file or convert the colors to CMYK.  The grays will probably be the easy part ( 20%, 45% ), but the dark greenish blue will have to be remixed ( i.e., 100C, 18.5M, 0Y, 51K ).  I think you could use the existing elements, but you might have to expand them or divide them.  You should avoid layering or overlaying, just work with a flattened .ai file and see if that prints any better.  Raster elements, transparency, and layering effects are better handled via a Postscript 3 RIP + PRINTER.  If your laser is non-postscript and does not have a RIP ( raster image processor ), then the color will be problematic.  If you will be printing the sheets for the tradeshow using the laser, then whatever you mix will be able to be proofed ( by eye, I assume ) internally.  If you go outside and use a Kinkos or something, then color should be proofed using a contract proofer at your local prepress shop before sending it out to be printed.

  • Custom resizing images when printing in Elements 11

    Hi friends .... I could use some help ... When I was using an older Photoshop version ...I could select "print with preview" and there I could adjust the size and proportion of the image to the paper size - I would see the paper in a preview box and could adjust the image by sliding the box at the corner points and size the image any way I wanted ... and could see the actual preview of how the image could fit on the paper .... in Elements 11 - even if I do a PDF and print in Preview- there's no way I can see to do that ... I only see options for set sizes- even under the custom sizing menu ... I'm using exactly the same printer that I used with Photoshop - so I'm assuming this is a limitation with Elements ... I don't even see the option in Elements printing to change the image percentage as I've been used to with any other page setup before .... Please give any advice - this is making printing exactly what I want pure guesswork and is very difficult for me ...there must be something I'm missing when I print with Elements 11 .... thanks for any help ...
    David

    Oh yes it has Barbara.  David is right.  Have a look at Elements 5.  I got that free and would still be using it if I hadn't had to upgraded to Windows 7.  I've now had to buy Elements 11 because Elements 5 wouldn't load and Elements 11 does not have that fascility that David laments.  I used that printing option almost exclusively for printing cards and I bitterly regret not having it now.  I'm very disappointed with these printing options in Elements 11.  The problem is that Photoshop eminates from the one country in 180 that seems manacled to its imperial measurements that the rest of the world has to keep wading through. I expect that to acquire my favourite printing fascility I shall have to get the full verson.  I have seen it in screenshots, so I know that it is there.  It's all very well for Barbara to say resize before entering the print window but this is just trial and error and takes forever.  In the meantime I shall continue to spend ages working round this cumbersome resizing problem each time I print my cards.

  • After installing CS5 all pdf printers crash when printing

    Hello!
    I'm having really annoying problem with pdf-printers. After CS5 has been installed all pdf printers stop working.
    I've tried to print with Adobe PDF, pdf x-change, PDF-converter and all of them hungs upp and takes down also the program where im printing from. I have same problem on two differents computers (both win xp sp3). Uninstalling other pdf printers and leaving just Adobe PDF wont help. All updates are applied. No help from event viewer or any logs, just notify of crashed program.
    I'm pretty sure that this is some kind of shared .dll or driver problem.. What should i do?

    Hi Theo:
    Just out of curiosity, did you set up your printer using the OS X built-in drivers, or did you use the HP stuff? I have seen posts from people who have had difficulties with the HP supplied drivers.
    Also, by the latest Adobe Reader, I am assuming that is 9.0.0. I had a similar problem sometime ago, but it seemed to disappear when I downloaded the aforementioned version of the Reader.
    Barry

  • Lines on image when printing Raw files

    Dear All
    I am trying to print Raw images.
    After converting and making my adjustments, I click on File > print (in the PSE editor) and then use the cursor to drag out the image to the size I want (roughly a 10 inch by 8 inch image to be printed on A4 paper). I then print it and it comes out with loads of parallel lines on the image.
    Any advice to correct this?
    Regards
    Jon CAmilleri

    Hello All
    I am managing to print out raw files fine after manipulating them in canons own software (Digital photo professional) but still getting bands when using PSE 7 raw converter? Any more advice?
    When sending to print in PSE a box comes up saying 'Some post-script specific settings (interpolation, calibration, encoding) will be ignored as you are printing to a non-postscript printer'  This box does not come up when printing from digital photo professional. Could this be the problem resulting in bands on the image and, if so, can it be corrected?
    Someone mentioned about Gamut problems - how do I alter/correct these?
    Also, with Raw files, after I have manipulated them (e.g to black and white) how can I perform other tasks (eg dodge and burn areas)  as it seems that PSE wont let me do this on a RAW image.
    Do I have to save it as a JPEG first ?   If so, what is the point in taking a RAW image in the first place if I am going to lose detail by converting it to a JPEG?
    Sorry for all the questions
    Regards
    Jon

  • HP D110 AIO printer. Prints jam when printing with wireless, but not when hooked to USB cable! HELP!

    I have a HP D110. It jams the paper when I print with wireless, but not when I use USB cable. Any ideas?

    From what you describe you are having issues printing from MS Office. Have you had trouble printing from other resources on your computer (e.g. from the internet or another program)? The first thing I am going to suggest is that we start by uninstalling and reinstalling the printer from the resources available online. 
    First if you use a USB cord, make sure to remove it (this is important). Do not plug it back in until the software directs you to. Then go through the Devices and Printers, Programs and Features and Device Manager folders and insure that all copies, files, and programs related to the printer are removed. Then as directed, restart the computer. 
    In the START menu type "%temp%" and press ENTER. Here I want you to press Ctrl+A and hit DELETE. Some of the files will not allow you to delete them, skip those files and delete the majority that allows it. 
    http://h20000.www2.hp.com/bizsupport/TechSupport/DriverDownload.jsp?prodNameId=3562006&lang=en&cc=us...
    Install that and let me know the result! 
    Have a great day!

Maybe you are looking for