CS5 does not start from new SSD disc

I have recently exchanged my HDD with a new SSD disc on a Macbook Pro running Mavericks. I have put an image of my original disc on the SSD and after installation everything runs fine as it should, except of Illustrator CS5, which doesn't even start up.
I get the following error:
Adobe Illustrator cannot be opened because of a problem.
Check with the developer to make sure Adobe Illustrator works with this version of OS X. You may need to reinstall the application. Be sure to install any available updates for the application and OS X.
If I actually plug in my old HDD as USB disc and start CS5 there, it runs no problem. Hence it doesn't seem to be a problem of the OS (anyway, it worked fine before changing the discs).
The detailed crash report follows:
Process:
Adobe Illustrator [565]
Path:
/Users/USER/Desktop/*/Adobe Illustrator.app/Contents/MacOS/Adobe Illustrator
Identifier:
com.adobe.illustrator
Version:
Code Type:
X86 (Native)
Parent Process: launchd [150]
Responsible:
Adobe Illustrator [565]
User ID:
501
Date/Time:
2014-01-20 20:03:01.639 +0100
OS Version:
Mac OS X 10.9.1 (13B42)
Report Version: 11
Exception Type: EXC_BREAKPOINT (SIGTRAP)
Exception Codes: 0x0000000000000002, 0x0000000000000000
Application Specific Information:
dyld: launch, loading dependent libraries
Dyld Error Message:
Library not loaded: @executable_path/../Frameworks/AdobeBIBUtils.framework/Versions/A/AdobeBIBUtils
Referenced from: /Users/USER/Desktop/*/Adobe Illustrator.app/Contents/MacOS/Adobe Illustrator
Reason: image not found
Binary Images:
0x8fe14000 - 0x8fe46417 dyld (239.3) <4B280BB1-55F8-313F-86A6-8ADD644ED69E> /usr/lib/dyld
0x94c04000 - 0x94c12ff7 libz.1.dylib (53) <858B4D9F-D87E-3D81-B07A-DF9632BD185F> /usr/lib/libz.1.dylib
0x99ba0000 - 0x99ba0fff com.apple.Carbon (154 - 157) <6E680560-FD53-3C00-BDF7-7AFA28747DC8> /System/Library/Frameworks/Carbon.framework/Versions/A/Carbon
Model: MacBookPro6,2, BootROM MBP61.0057.B0F, 2 processors, Intel Core i5, 2.4 GHz, 8 GB, SMC 1.58f17
Graphics: Intel HD Graphics, Intel HD Graphics, Built-In, 288 MB
Graphics: NVIDIA GeForce GT 330M, NVIDIA GeForce GT 330M, PCIe, 256 MB
Memory Module: BANK 0/DIMM0, 4 GB, DDR3, 1067 MHz, 0x80CE, 0x4D34373142353237334348302D4346382020
Memory Module: BANK 1/DIMM0, 4 GB, DDR3, 1067 MHz, 0x80CE, 0x4D34373142353237334348302D4346382020
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x93), Broadcom BCM43xx 1.0 (5.106.98.100.22)
Bluetooth: Version 4.2.0f6 12982, 3 services, 23 devices, 1 incoming serial ports
Network Service: AirPort, AirPort, en1
Network Service: GFZVPN, IPSec, utun0
Serial ATA Device: Samsung SSD 840 PRO Series, 512,11 GB
Serial ATA Device: MATSHITADVD-R   UJ-898
USB Device: Hub
USB Device: AS2105
USB Device: BRCM2070 Hub
USB Device: Bluetooth USB Host Controller
USB Device: Internal Memory Card Reader
USB Device: Apple Internal Keyboard / Trackpad
USB Device: Hub
USB Device: Built-in iSight
USB Device: IR Receiver
Thunderbolt Bus:
Anybody understands what the problem could be?

Uninstall AI and reinstall from the original disks. Something got munched in the imaging. Adobe apps are not fond of such changes.

Similar Messages

I installed the new version of LIghtroom (2015) from Creative Cloud. Creative Cloud says I successfully installed the new version. However, the shortcut icon that was installed does not start the new version. I've also gone to the properties link itsel

I installed the new version of LIghtroom (2015) from Creative Cloud. Creative Cloud says I successfully installed the new version. However, the shortcut icon that was installed does not start the new version. I've also gone to the properties link itself but, no success in starting. How do I launch the new version?

Thank you, toinimj59. I did this part and the installation completed (apparently it didn't earlier--included an acceptance of the standard terms and conditions...
Solution 1: Sign out from Creative Cloud desktop app and sign back in
Sign out from, and back in to, the Creative Cloud desktop app. Click here for instructions
Launch Lightroom.

Mbp 15" does not start from set up disk

I formatted my MBP because it did not recognize the monitor, had to attach an extermal one to view image. Now, I cannot install the original OS because it does not start from set up disk. I was using OSX Lion latest version

Formatting the entire drive was rather excessive to solve a external monitor issue.
Likely a PRAM or SMC reset would have cleared it.
Step by Step to fix your Mac
10.7 Lion can only be reinstalled via the Recovery HD partition or via a external Recovery USB made in advance.
Hopefully the Recovery HD partition is still availalbe, hold the command and r keys down while booting (with a actve Internet connection cable attached to the router or modem) and see what happens. If you get something then format the Macinstosh HD partition in Disk Utility (GUID, OS X extended journaled) and quit, reinstall 10.7 from Apple's servers with your AppleID and password.
https://support.apple.com/kb/HT4718
http://osxdaily.com/2011/08/08/lion-recovery-disk-assistant-tool-makes-external- lion-boot-recovery-drives/
If not, then hold c or option key and boot from the 10.6 installer disk, use Disk Utility to erase the entire drive on the left and format same (GUID, OS X extended journaled) then quit and install 10.6, then log into AppStore and update to 10.7 again, the Recovery HD partition will be reinstalled automatically.
How to erase and install Snow Leopard 10.6
How to reinstall just OS X or erase/install OS X
If your attemtping to revert your 10.7 Mac to 10.6 then read this, it's a better explaination
How to revert your Mac to Snow Leopard
If your 10.6 disk doesn't work, then call Apple for a replacement disk.

VIPCA does not start from root.sh

Hi all,
I've a problem in installing RAC 10g on ia64 architecture.
S.O.: RH Enterprise Linux AS 2.1
Oracle CRS install completed successfully.
The problems came up during DB installation when I need to run root.sh script that should automatically invoke VIPCA.
Here's what I see when I execute root.sh. :
[root@rx5670 root]# /u01/app/oracle/product/10.1.0/db_1/root.sh
Running Oracle10 root.sh script...
\nThe following environment variables are set as:
ORACLE_OWNER= oracle
ORACLE_HOME= /u01/app/oracle/product/10.1.0/db_1
Enter the full pathname of the local bin directory: [usr/local/bin]:
Copying dbhome to /usr/local/bin ...
Copying oraenv to /usr/local/bin ...
Copying coraenv to /usr/local/bin ...
\nCreating /etc/oratab file...
Adding entry to /etc/oratab file...
Entries will be added to the /etc/oratab file as needed by
Database Configuration Assistant when a database is created
Finished running generic part of root.sh script.
Now product-specific root actions will be performed.
Exception in thread "main" java.lang.UnsatisfiedLinkError: allocHASContext
at oracle.ops.mgmt.has.HASContextNative.allocHASContext(Native
Method)
at oracle.ops.mgmt.has.HASContext.<init>(HASContext.java:93)
at oracle.ops.mgmt.has.HASContext.getInstance(HASContext.java:223)
at oracle.ops.mgmt.has.ClusterUtil.<init>(ClusterUtil.java:46)
at
oracle.ops.mgmt.cluster.GetActiveNodes.<init>(GetActiveNodes.java:164
at
oracle.ops.mgmt.cluster.GetActiveNodes.create(GetActiveNodes.java:213
at oracle.ops.mgmt.cluster.Cluster.getNodes(Cluster.java:267)
at oracle.ops.vipca.VipCA.getNodeList(VipCA.java:532)
at oracle.ops.vipca.VipCA.processGUIArgs(VipCA.java:242)
at oracle.ops.vipca.VipCA.runApplication(VipCA.java:2141)
at oracle.ops.vipca.VipCA.main(VipCA.java:2423)
[root@rx5670 root]#
Thanks a lot,
Simone

CSSD does not start (Cluster Manager)
CSSD does not start (Cluster Manager)

SQL Developer 1.1.3 does not start from NT

We were previously running 1.1(2514) and have just started rolling out 1.1.3 (2766) and have found that the latest version does not start under NT. Error shell32.dll error.
Is there a fix / workaround as this will stop our rollout of this version, which has some interesting BUG fixes ?

I thought so too, but just a couple of months ago Brian added another bug for NT in Re: Sqldeveloper failed to start after latest 1.1.2 Patch .
Doing the search I also came across Sue's more official response in Support for Windows NT? . However that post was over a year old...
K.

Photoshop Elements 11 Organiser does not start from the welcome screen

Having installed Photoshop Elements 11(Windows 7) I cannot open the Organiser from the welcome screen. It can be opened via the Editor but few of the thumbnails are shown as pictures rather as empty squares. The situation does not improve with time but tends to get worse with pictures turning into squares. I have tried the tip with preferences but to no avail. I would be very grateful for some help. Best Regards Ian Tomlinson

Try pressing Ctrl+A (to select all thumbnails) and then refresh again (Edit >> Update Thumbnails for selected items). If that makes no difference you may need to regenerate the cache.
It may be worth rebuilding the thumbnail cache before re-installing. Click the menu:
Help >> System info to find the path to your catalog.
1. Close Organizer.
2. Navigate to C: ProgramData/Adobe/Elements Organizer/Catalogs/My Catalog
3. Find the file - thumb.5.cache
4. Highlight the file and delete it.
5. Re-start Elements Organizer
6. Wait until all thumbnails have been generated.
N.B. ProgramData may be a hidden system file:
http://windows.microsoft.com/en-US/windows-vista/Show-hidden-files

Onlocation CS5 does not start record but freezes

I have a Sony HVR-ZU1 camera , using Premiere CS5 to capture video from the miniDV tape in the camera works fine.
I want to save the heads on my camera so I want to use Onlocation.
I bring up the software choose the camera and I can see perfectly, everything
is operational.
However, when I click the record button in onlocation everything freezes.
Any suggestions?
Here is my system (I am record to a Solid State Drive for speed)
Operating System
Windows 7 Professional (x64) (build 7600)
Processor a
3.40 gigahertz AMD Phenom II X4 965
512 kilobyte primary memory cache
2048 kilobyte secondary memory cache
6144 kilobyte tertiary memory cache
64-bit ready
Multi-core (4 total)
Memory Modules c,d
12288 Megabytes Usable Installed Memory
Display
NVIDIA GeForce GTX 470 [Display adapter]
Sceptre X24WG [Monitor] (24.0"vis, s/n 150, November 2008)
Multimedia
Sony HVR-Z1U

This worked for me too on the HP ProBook with firewire. Stopped the internal WEB Cam in device manger and all fine.

T60p does not boot from new primary hard disk (Single-boot Linux/Fedora 14)

Hi,
I have just upgraded the primary disk in my T60p laptop (model 8742-C4G.) The BIOS recognised the disk fine, I partitioned it, marked the first partition as bootable, and then copied the OS (Fedora 14) and all my data back onto it. Then I installed the GRUB bootloader using the following commands:
grub> root (hd0,0)
grub> find /grub/stage1
grub> setup (hd0)
grub> quit
I've also tried installing GRUB with "setup (hd0,0)" instead of "setup (hd0)", without success.
This ran fine, exactly like with all the other PCs I've successfully performed this procedure on in the past. However, this laptop is refusing to boot from the new disk. There's no sign of any activity, either - just a flashing cursor in the top-left corner of the otherwise blank LCD panel. So I'm guessing that either the bootloader is failing immediately, or the laptop isn't executing the bootloader at all.
The laptop is running the very latest v1.18 BIOS, and there are no beeps, POST errors or anything like that. My previous disk booted into Fedora 14 without any difficulty at all, of course.
Can anyone suggest why the T60p is not booting, please? And also how to fix it? Is there any extra initialisation that I need to do in the BIOS, for example? (I haven't seen any...) The disk *does* appear in the BIOS's list of bootable media. Or maybe there's some special code that needs to be written into the MBR that GRUB doesn't know about?
The disk is a 320 GB 7200rpm Western Digital drive, and the Lenovo/IBM salesperson assured me that it was fully compatible with a T60p laptop without the need for any extra firmware.
Thanks in advance for any ideas, because I'm completely stumped at this point.
Cheers,
Chris
N.B. This is a Linux laptop, and so Windows-centric suggestions aren't going to help me.

You said you can't get into Windows safe mode, have you installed Windows on the hard drive? Are you able to get into the BIOS for the controller?
If you aren't able to access the BIOS for the controller, it may be due to bad RAM. If you are comfortable installing RAM and you have some extra laptop RAM of the same type (I think it's DDR3 for your controller) laying around, you can try swapping out the RAM.
Was your hard drive damaged through some event, or did it just stop working?
AC - LV Solver

MY CS5 does not support my new Canon 7D Mark II camera Raw files on my Mac - what needs to be downloaded?

I'm having trouble getting the CR2 files from my new Canon 7D Mark II camera to CS5/Bridge - it says the files are not supported by the installed version of RAW. The DNG Converter dos not seem to help (I noticed it works for CS6 & CC only) What needs to be done?

I don't know your OS. If you have Vista (Windows) or OSX 10.6.8, you can only go to DNG 8.3, not the 8.7.1 you need.
What is your OS version?
Gene

11g node manager reachable but server does not start from admin console

I have a issue with node manager is reachable from admin console and from command prompt it is not connected and could not able to start the managed server.
If i change /config/nodemanager/nm_password.properties plain text and restart it is not reachable in admin console abut can connect from command prompt. I could not able to start the even with this scenario.
i see below error when try to check machine monitor tab.
<Error> <NodeManager> <BEA-300033> <Could not execute command "getVersion" on the node manager. Reason: "Access to domain 'dom_11gint' for user 'Ckr10ycOJN' denied".>
Ckr10ycOJN username in config.xml
node manager and managed servers are not root user process.
Please help me if have any suggestions.

Pls. make sure the following points in your environment.
1) Check '*nodemanager.domains*' file in <<WL_HOME>>\commo\nodemanager directory
     a) This file should have the entry for your domain 'dom_11gint'.
     b) Ensure the path referred in the nodemanager.domains file is correct one.
2) Ensure the following remote server startup parameters are passed properly.
     a) In the Admin Console, Navigate Servers --> <<SERVER_NAME>> -->Configuration --> Server Start
     b) Pass the required Class Path, Arguments, User Name, Password(User name and Password to boot the managed servers)

ITunes10 does not start from Data-Disk(error 13001)!

After moving my user folder to an external disk I get the message "Could not open Application "iTunes". Unknown error 13001. Reinstalling iTunes did not help, neither did an alias of the iTunes-folder in the equivalent folder on my System-disk.
Any help appreciated!

Found the solution myself. I had a " in the name of the external drive. After removing it all worked fine.

IPod touch music does not start songs from the beginning

the songs on an ipod touch does not start from the beginning how do you fix this

In your iTunes Library, check the songs to see if they are set to Remember playback position. If they are, turn that off and Sync the iPod with iTunes for these new changes to take effect.
Highlight a song, right-click/Get Info/Options>Remember playback position:

Game does not start after installing on mac pro

Game does not start after new install on mac pro ?

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Click the Clear Display icon in the toolbar. Then try the action that you're having trouble with again. Select any messages that appear in the Console window. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V).
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Anonymize before posting.

FastcgiStub does not raise a new process

Hi there.
we have a perl FCGI running with Sun ONE 6.1 sp5 over Solaris10.
We have a line in obj.conf like this:
<Object name="fcgi.perl">
Service fn="responder-fastcgi" app-path="/usr/bin/perl" app-args="/internet/datos/WWW/cgi-bin/loginCGI/loginCGI.pl" app-args="/inter
net/datos/WWW/cgi-bin/loginCGI" bind-path="localhost:27527" resp-timeout=10 restart-interval=30 min-procs=1 max-procs=10
</Object>
We are doing load test against our web app., and we can see that Fastcgistub does not start a new perl process when needed (and of couerse, we fail in process too many request). Instead of that, when our perl dies due to a SIGPIPE signal, we can see this message in fastcgitub.log, repeated a lot of times:
server bind error
/usr/bin/perl bound to localhost:27527 is already running
Could you help us with this issue, please?
Thanks a lot in advance.
Best Regards

In my test setup :
<Object name="fcgi.perl">
Service fn="responder-fastcgi" app-path="/opt/csw/bin/perl" app-args="/tmp/one.pl" bind-path="localhost:27527" resp-timeout=10 restart-interval=30 min-procs=2 max-procs=10
</Object>
If I overload the CPU using
$ ab -n 100000 -c 100 http://host:port/fcgiperl/
I am able to saturate the CPU. Even if I print a sleep statement in while loop
of /tmp/one.pl then too, I don't get the error you mentioned.
I however observed that Fastcgistub doesn't create the new processes.
Can you test the following script in your test environment to see how
it performs?
--------------------- /tmp/one.pl -----------------------------
#!/usr/bin/perl
use IO::File;
#use strict;
use CGI::Fast qw(:standard);
$COUNTER = 0;
while (new CGI::Fast) {
print header;
print start_html("Fast CGI Rocks");
print
h1("Fast CGI Rocks"),
"Invocation number ",b($COUNTER++),
" PID ",b($$),".",
hr;
print end_html;
-----------------------------------------------------

Just installed Firefox 3.6. Firefox will not start and Firefox safemode does not start either. Using Task manager I do not see if started either. If I create a new profile and start from that window, Firefox starts up. I see no error windows/messages. I d

Just installed Firefox 3.6. Firefox will not start and Firefox safemode does not start either. Using Task manager I do not see if started either. If I create a new profile and start from that window, Firefox starts up. I see no error windows/messages. I do have it listed in my Firewall as an exception program with Permit All. What is happening?
== This happened ==
Every time Firefox opened
== After removing Firefox and Reinstalling it. ==
== User Agent ==
Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 5.1; GTB6.4; .NET CLR 1.1.4322; .NET CLR 2.0.50727; .NET CLR 3.0.04506.30; .NET CLR 3.0.04506.648; MS-RTC LM 8)

If that new profile works then you can transfer some files from the old profile to that new profile (be careful not to copy corrupted files)
See http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox
See also [[Basic Troubleshooting|#Make_a_new_profile|Basic Troubleshooting: Make a new profile]]

CS5 does not start from new SSD disc

Similar Messages

Maybe you are looking for