CS5 Dual Screen Issues

I am running a dual screen which essentially creates a workspace that is 3360 x 1050. Dreamweaver CS5 on the MAC Seems to have a mind of it's own in relationship to the space. Is there any way to "contain" it in window like it ran in CS3 on my windows machine?

It's not invisible, just positioned twice as far away as it needs to be.
Have a look at the step-by-step instructions I posted on this thread to get your window back:
http://discussions.apple.com/thread.jspa?messageID=4721686

Similar Messages

Xfce4 and dual screen issues

I have setup dual screen in xfce4, i have added
xrandr --output VGA --left-of LVDS
to xfce4 startup apps. But the issue is that both screen defaults to 1024x768 and if it change the resolution to the correct one my laptop screen turn black. This is some what the similar kind i issue i face in kdemod4 but gnome work ok with with the above command.

What video card?
What drivers?

Dual screen issue

Hi Team,
I have dual screens. A Dell P190S (1280x1024) and a HP ZR22w (1920x1080). I have also an Intel® Q45 and Q43 Express Chipsets in my desktop PC.
When I use PS, sometimes the circle which indicates the size of the draw tool or the earse tool is freezing on my screens. Even if I close PS, it is still there or even when I lock my computer is still there.
Unfortunately I haven't found any solution for this issue.
Is it because of the different screen resolution?
Message was edited by: gaborf

OK, so we are talking about the same ball park circumstances from the historical problems with brush cursors. I think Compaq computers are rather arbitary regards hardware and drivers, and don't usually allow much in the way of upgrading, so you could be stuck with what you have got. All I can suggest it homing in on those paramiters with Google
Photoshop CS4 cursor issue or problem
sort of thing.
This is the sort of hit you'll find
http://www.earthboundlight.com/phototips/photoshop-cursor-problems.html
You'll hopefully find something that rings a bell or matches your circumstances closely. Good luck.
[EDIT] I wonder if your hardware will support Windows 7? It has excellent dual screen support. That irrifutable law of presentations, that 'when a Powerpoint and projector were involved, there will _always_ be a problem' has finally been broken. If your employer was daft enough to invest in Compaq hardware, I doubt you'll get any help from them.

R6870 Hawk Dual screen issue

Hey there,
(R6870 HAWK)
The issue is: I cant get a dual screen on my card, no matter what I try.
Both screen and cables are working just fine (I tried all possible combos), but there is simply no way I can get 2 screens to work at the same time.
Any ideas?
Many thanks...

Are you using the two DVI ports ?
Swop the two monitors around by switching the cables on the card DVI ports. Does the other monitor work when you do that ?
Also chek what DVI connectors are present on your monitors ? Do they differ ? see this guide to the different DVI connections. http://en.wikipedia.org/wiki/Digital_Visual_Interface

Simple dual screen issue.

Hi,
for some reason ever since I rebooted my macpro the dual screen layout has switched. On my right screen is the dock and upper info bar but I want that on the left screen. It has always been on the left screen till the reboot. I cant seem to find anything in the settings.
Thanks
Neil toor

System Preferences -> Displays -> Arrangement.
Drag the menu bar to the screen you want it to be on, the Dock will follow.

GTX 780TI GAMING 3G dual screen issue

Hi,
Been searching around but I don't seem to be able to hone in on the right search criteria to find anything.
I have the 780ti running dual screens. I have a nice new 144hz widescreen and I'm running an old Philips 75hz as general purpose screen next to it. I'm keeping hold of the old one at the minute as it works well with my gfs work laptop when she needs a full screen.
When I bring a game up and try and run it on the 144hz screen it tries to swap screen constantly. It flicks back and forwards across both screens at a rapid rate.
I had this working on my very old twin 4870s (you can tell how long I've been out of the game literally) but it occurred to me that I was running a screen off each card. So now I'm wondering if I can run two screens of one 780ti? If that's the case I'll just get another one which I plan to do in the future anyway. But after splashing out 2k on a new machine spending another 500 isn't going to make the gf happy.

It isn't that I want to run across both.
I wanted the game on 1 screen and another screen to put up web pages, voice server etc.
I guess it is the same difference to the card though. I may just be better of with another card and another 144hz screen.
I would've thought running the game windowed and making sure it didn't stray onto the other screen would be possible.

[Xorg] Dual Screen issue

Hello ladies and gents,
I try since few days to configure a dual screen for my arch.
At least, it doesn't works , my second screen is always black.
My configuration :
I have a Radeon HD 7870
I've installed the opensource drivers xf86-video-ati
I use awesome 3 as window manager
The first screen is plug in HDMI on MDMI-0 (it's a ViewSonic 24" in 1920x1080_60)
The second screen is plug in DVI on DVI-1 (it's a Samsung SyncMaster 24" in 1920x1080_60)
Both of them works fine in standalone.
And both of them works fine together during the boot and the system choice (syslinux).
After the choice, black out for my second screen.
I'have done lot of tries. Any of them works.
I tried to use xrandr :
xrandr --output DVI-1 --mode 1920x1080 --pos 1920x0 --output HDMI-0 --mode 1920x1080 --pos 0x0 --verbose
The second screen is always black et xrandr returns :
crtc 0: 1920x1080 60.0 +0+0 "HDMI-0"
crtc 1: 1920x1080 60.0 +1920+0 "DVI-1"
Same result with arandr
For information :
xrandr -q --verbose
returns :
Screen 0: minimum 320 x 200, current 3840 x 1080, maximum 16384 x 16384
DisplayPort-0 disconnected (normal left inverted right x axis y axis)
Identifier: 0x45
Timestamp: 107196
Subpixel: horizontal rgb
Clones:
CRTCs: 0 1 2 3 4 5
Transform: 1.000000 0.000000 0.000000
0.000000 1.000000 0.000000
0.000000 0.000000 1.000000
filter:
underscan vborder: 0
range: (0, 128)
underscan hborder: 0
range: (0, 128)
underscan: off
supported: offonauto
coherent: 1
range: (0, 1)
HDMI-0 connected 1920x1080+0+0 (0x4a) normal (normal left inverted right x axis y axis) 520mm x 290mm
Identifier: 0x46
Timestamp: 107196
Subpixel: horizontal rgb
Gamma: 1.0:1.0:1.0
Brightness: 1.0
Clones:
CRTC: 0
CRTCs: 0 1 2 3 4 5
Transform: 1.000000 0.000000 0.000000
0.000000 1.000000 0.000000
0.000000 0.000000 1.000000
filter:
EDID:
00ffffffffffff005a632a7d01010101
2916010380341d782e2ac5a4564f9e28
0f5054bfef80b300a940950090408180
8140714f0101023a801871382d40582c
450008222100001e000000ff00535848
3132343130303632380a000000fd0032
4c0f5312000a202020202020000000fc
00565832343630205345524945530185
020322f14f900504030207061f141312
1116150123091f078301000065030c00
2000023a801871382d40582c45000822
2100001e011d8018711c1620582c2500
08222100009e011d007251d01e206e28
550008222100001e8c0ad08a20e02d10
103e9600082221000018023a80d07238
2d40102c458008222100001e00000004
underscan vborder: 0
range: (0, 128)
underscan hborder: 0
range: (0, 128)
underscan: off
supported: offonauto
coherent: 1
range: (0, 1)
1920x1080 (0x4a) 148.5MHz +HSync +VSync *current +preferred
h: width 1920 start 2008 end 2052 total 2200 skew 0 clock 67.5KHz
v: height 1080 start 1084 end 1089 total 1125 clock 60.0Hz
1920x1080 (0x4b) 148.5MHz +HSync +VSync
h: width 1920 start 2448 end 2492 total 2640 skew 0 clock 56.2KHz
v: height 1080 start 1084 end 1089 total 1125 clock 50.0Hz
1920x1080i (0x4c) 74.2MHz +HSync +VSync Interlace
h: width 1920 start 2448 end 2492 total 2640 skew 0 clock 28.1KHz
v: height 1080 start 1084 end 1094 total 1125 clock 50.0Hz
1920x1080i (0x4d) 74.2MHz +HSync +VSync Interlace
h: width 1920 start 2008 end 2052 total 2200 skew 0 clock 33.8KHz
v: height 1080 start 1084 end 1094 total 1125 clock 60.1Hz
1600x1200 (0x4e) 162.0MHz +HSync +VSync
h: width 1600 start 1664 end 1856 total 2160 skew 0 clock 75.0KHz
v: height 1200 start 1201 end 1204 total 1250 clock 60.0Hz
1680x1050 (0x4f) 119.0MHz +HSync -VSync
h: width 1680 start 1728 end 1760 total 1840 skew 0 clock 64.7KHz
v: height 1050 start 1053 end 1059 total 1080 clock 59.9Hz
1400x1050 (0x50) 101.0MHz +HSync -VSync
h: width 1400 start 1448 end 1480 total 1560 skew 0 clock 64.7KHz
v: height 1050 start 1053 end 1057 total 1080 clock 59.9Hz
1280x1024 (0x51) 135.0MHz +HSync +VSync
h: width 1280 start 1296 end 1440 total 1688 skew 0 clock 80.0KHz
v: height 1024 start 1025 end 1028 total 1066 clock 75.0Hz
1280x1024 (0x52) 108.0MHz +HSync +VSync
h: width 1280 start 1328 end 1440 total 1688 skew 0 clock 64.0KHz
v: height 1024 start 1025 end 1028 total 1066 clock 60.0Hz
1440x900 (0x53) 88.8MHz +HSync -VSync
h: width 1440 start 1488 end 1520 total 1600 skew 0 clock 55.5KHz
v: height 900 start 903 end 909 total 926 clock 59.9Hz
1280x960 (0x54) 108.0MHz +HSync +VSync
h: width 1280 start 1376 end 1488 total 1800 skew 0 clock 60.0KHz
v: height 960 start 961 end 964 total 1000 clock 60.0Hz
1152x864 (0x55) 108.0MHz +HSync +VSync
h: width 1152 start 1216 end 1344 total 1600 skew 0 clock 67.5KHz
v: height 864 start 865 end 868 total 900 clock 75.0Hz
1280x720 (0x56) 74.2MHz +HSync +VSync
h: width 1280 start 1720 end 1760 total 1980 skew 0 clock 37.5KHz
v: height 720 start 725 end 730 total 750 clock 50.0Hz
1280x720 (0x57) 74.2MHz +HSync +VSync
h: width 1280 start 1390 end 1430 total 1650 skew 0 clock 45.0KHz
v: height 720 start 725 end 730 total 750 clock 60.0Hz
1440x576i (0x58) 27.0MHz -HSync -VSync Interlace
h: width 1440 start 1464 end 1590 total 1728 skew 0 clock 15.6KHz
v: height 576 start 580 end 586 total 625 clock 50.1Hz
1024x768 (0x59) 78.8MHz +HSync +VSync
h: width 1024 start 1040 end 1136 total 1312 skew 0 clock 60.1KHz
v: height 768 start 769 end 772 total 800 clock 75.1Hz
1024x768 (0x5a) 75.0MHz -HSync -VSync
h: width 1024 start 1048 end 1184 total 1328 skew 0 clock 56.5KHz
v: height 768 start 771 end 777 total 806 clock 70.1Hz
1024x768 (0x5b) 65.0MHz -HSync -VSync
h: width 1024 start 1048 end 1184 total 1344 skew 0 clock 48.4KHz
v: height 768 start 771 end 777 total 806 clock 60.0Hz
1440x480i (0x5c) 27.0MHz -HSync -VSync Interlace
h: width 1440 start 1478 end 1602 total 1716 skew 0 clock 15.7KHz
v: height 480 start 488 end 494 total 525 clock 60.1Hz
832x624 (0x5d) 57.3MHz -HSync -VSync
h: width 832 start 864 end 928 total 1152 skew 0 clock 49.7KHz
v: height 624 start 625 end 628 total 667 clock 74.6Hz
800x600 (0x5e) 50.0MHz +HSync +VSync
h: width 800 start 856 end 976 total 1040 skew 0 clock 48.1KHz
v: height 600 start 637 end 643 total 666 clock 72.2Hz
800x600 (0x5f) 49.5MHz +HSync +VSync
h: width 800 start 816 end 896 total 1056 skew 0 clock 46.9KHz
v: height 600 start 601 end 604 total 625 clock 75.0Hz
800x600 (0x60) 40.0MHz +HSync +VSync
h: width 800 start 840 end 968 total 1056 skew 0 clock 37.9KHz
v: height 600 start 601 end 605 total 628 clock 60.3Hz
800x600 (0x61) 36.0MHz +HSync +VSync
h: width 800 start 824 end 896 total 1024 skew 0 clock 35.2KHz
v: height 600 start 601 end 603 total 625 clock 56.2Hz
720x576 (0x62) 27.0MHz -HSync -VSync
h: width 720 start 732 end 796 total 864 skew 0 clock 31.2KHz
v: height 576 start 581 end 586 total 625 clock 50.0Hz
720x480 (0x63) 27.0MHz -HSync -VSync
h: width 720 start 736 end 798 total 858 skew 0 clock 31.5KHz
v: height 480 start 489 end 495 total 525 clock 59.9Hz
640x480 (0x64) 31.5MHz -HSync -VSync
h: width 640 start 664 end 704 total 832 skew 0 clock 37.9KHz
v: height 480 start 489 end 491 total 520 clock 72.8Hz
640x480 (0x65) 31.5MHz -HSync -VSync
h: width 640 start 656 end 720 total 840 skew 0 clock 37.5KHz
v: height 480 start 481 end 484 total 500 clock 75.0Hz
640x480 (0x66) 30.2MHz -HSync -VSync
h: width 640 start 704 end 768 total 864 skew 0 clock 35.0KHz
v: height 480 start 483 end 486 total 525 clock 66.7Hz
640x480 (0x67) 25.2MHz -HSync -VSync
h: width 640 start 656 end 752 total 800 skew 0 clock 31.5KHz
v: height 480 start 490 end 492 total 525 clock 60.0Hz
640x480 (0x68) 25.2MHz -HSync -VSync
h: width 640 start 656 end 752 total 800 skew 0 clock 31.5KHz
v: height 480 start 490 end 492 total 525 clock 59.9Hz
720x400 (0x69) 28.3MHz -HSync +VSync
h: width 720 start 738 end 846 total 900 skew 0 clock 31.5KHz
v: height 400 start 412 end 414 total 449 clock 70.1Hz
DVI-0 disconnected (normal left inverted right x axis y axis)
Identifier: 0x47
Timestamp: 107196
Subpixel: horizontal rgb
Clones:
CRTCs: 0 1 2 3 4 5
Transform: 1.000000 0.000000 0.000000
0.000000 1.000000 0.000000
0.000000 0.000000 1.000000
filter:
load detection: 1
range: (0, 1)
underscan vborder: 0
range: (0, 128)
underscan hborder: 0
range: (0, 128)
underscan: off
supported: offonauto
coherent: 1
range: (0, 1)
DVI-1 connected 1920x1080+1920+0 (0x4a) normal (normal left inverted right x axis y axis) 530mm x 300mm
Identifier: 0x48
Timestamp: 107196
Subpixel: horizontal rgb
Gamma: 1.0:1.0:1.0
Brightness: 1.0
Clones:
CRTC: 1
CRTCs: 0 1 2 3 4 5
Transform: 1.000000 0.000000 0.000000
0.000000 1.000000 0.000000
0.000000 0.000000 1.000000
filter:
EDID:
00ffffffffffff004c2dcc053432524c
0714010380351e782a6041a6564a9c25
1250542308008100814081809500a940
b30001010101023a801871382d40582c
4500122c2100001e000000fd00383c1e
5111000a202020202020000000fc0053
796e634d61737465720a2020000000ff
0048394d5a3230383438330a2020003f
load detection: 1
range: (0, 1)
underscan vborder: 0
range: (0, 128)
underscan hborder: 0
range: (0, 128)
underscan: off
supported: offonauto
coherent: 1
range: (0, 1)
1920x1080 (0x4a) 148.5MHz +HSync +VSync *current +preferred
h: width 1920 start 2008 end 2052 total 2200 skew 0 clock 67.5KHz
v: height 1080 start 1084 end 1089 total 1125 clock 60.0Hz
1600x1200 (0x4e) 162.0MHz +HSync +VSync
h: width 1600 start 1664 end 1856 total 2160 skew 0 clock 75.0KHz
v: height 1200 start 1201 end 1204 total 1250 clock 60.0Hz
1680x1050 (0x4f) 119.0MHz +HSync -VSync
h: width 1680 start 1728 end 1760 total 1840 skew 0 clock 64.7KHz
v: height 1050 start 1053 end 1059 total 1080 clock 59.9Hz
1280x1024 (0x52) 108.0MHz +HSync +VSync
h: width 1280 start 1328 end 1440 total 1688 skew 0 clock 64.0KHz
v: height 1024 start 1025 end 1028 total 1066 clock 60.0Hz
1440x900 (0x53) 88.8MHz +HSync -VSync
h: width 1440 start 1488 end 1520 total 1600 skew 0 clock 55.5KHz
v: height 900 start 903 end 909 total 926 clock 59.9Hz
1280x960 (0x54) 108.0MHz +HSync +VSync
h: width 1280 start 1376 end 1488 total 1800 skew 0 clock 60.0KHz
v: height 960 start 961 end 964 total 1000 clock 60.0Hz
1280x800 (0x6a) 71.0MHz +HSync -VSync
h: width 1280 start 1328 end 1360 total 1440 skew 0 clock 49.3KHz
v: height 800 start 803 end 809 total 823 clock 59.9Hz
1024x768 (0x5b) 65.0MHz -HSync -VSync
h: width 1024 start 1048 end 1184 total 1344 skew 0 clock 48.4KHz
v: height 768 start 771 end 777 total 806 clock 60.0Hz
800x600 (0x60) 40.0MHz +HSync +VSync
h: width 800 start 840 end 968 total 1056 skew 0 clock 37.9KHz
v: height 600 start 601 end 605 total 628 clock 60.3Hz
800x600 (0x61) 36.0MHz +HSync +VSync
h: width 800 start 824 end 896 total 1024 skew 0 clock 35.2KHz
v: height 600 start 601 end 603 total 625 clock 56.2Hz
640x480 (0x67) 25.2MHz -HSync -VSync
h: width 640 start 656 end 752 total 800 skew 0 clock 31.5KHz
v: height 480 start 490 end 492 total 525 clock 60.0Hz
And this is my Xorg.0.log file :
http://pastebin.com/Ah79VBbV
I tried differents 10-monitor.conf... without success : My second screen is always black.
A try :
Section "ServerLayout"
Identifier "Main"
Screen 0 "Screen0" 0 0
Screen 1 "Screen1" RightOf "Screen0"
EndSection
Section "Device"
Identifier "Device0"
Driver "radeon"
Option "ZaphodHeads" "HDMI-0"
VendorName "ATI"
BusID "PCI:1:0:0"
Screen 0
EndSection
Section "Device"
Identifier "Device1"
Driver "radeon"
Option "ZaphodHeads" "DVI-1"
VendorName "ATI"
BusID "PCI:0:2:0"
Screen 1
EndSection
Section "Screen"
Identifier "Screen0"
Device "Device0"
Monitor "HDMI-0"
DefaultDepth 24
SubSection "Display"
Depth 24
Modes "1920x1080"
EndSubSection
EndSection
Section "Screen"
Identifier "Screen1"
Device "Device1"
Monitor "DVI-1"
EndSection
Section "Monitor"
Identifier "HDMI-0"
Modeline "1920x1080_60.00" 173.00 1920 2048 2248 2576 1080 1083 1088 1120 -hsync +vsync
Option "PreferredMode" "1920x1080_60.00"
Option "dpms" "true"
EndSection
Section "Monitor"
Identifier "DVI-1"
Modeline "1920x1080_60.00" 173.00 1920 2048 2248 2576 1080 1083 1088 1120 -hsync +vsync
Option "PreferredMode" "1920x1080_60.00"
Option "dpms" "true"
EndSection
With Worg.0.log :
http://pastebin.com/n7YpQtfG
Another try:
Section "Device"
Identifier "Device0"
Driver "radeon"
Option "Monitor-HDMI-0" "Monitor0"
Option "Monitor-DVI-1" "Monitor1"
EndSection
Section "Monitor"
Identifier "HDMI-0"
Option "DPMS" "true"
EndSection
Section "Monitor"
Identifier "DVI-1"
Option "DPMS" "true"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Device0"
Monitor "HDMI-0"
DefaultDepth 24
SubSection "Display"
Depth 24
Modes "1920x1080" "1280x1024" "800x600"
Virtual 3840 3840
EndSubSection
EndSection
With Xorg.0.log :
http://pastebin.com/mvr4Vqvi
Any help/idea would be great.
Thanks.

Hello everyone !
Here is the dmesg :
http://pastebin.com/Jscw6y9i
If it can help.
I'm not sure if i posted in the good section. Maybe i should move the post to Kernel & Hardware ?

GTX 560ti Twin Frozr II - Dual Screen Issue + Silent fan speed

Hi, sorry for my bad english :p
CPU : Intel 2500k
Ram : 2x2go Ripjaws 1600mhz
Mb : Asus P8P67-M Pro
GPU : 560 gtx ti twin frozr II
EPU : Corsair 520w
1 - DUAL SCREEN
My first problem is that i can't use a true extended monitor configuration (1 dvi + 1 vga, 1920*1080 + 1280*1024).
Dual monitor work in CLONE MODE but not in extended.
Extended mode use 1 monitor or turn to clone mode automatically :/
EXCEPT after a NEW driver installation. So if i want to use dual screen extended mode, i have to reinstall driver each time i boot...
I have use DriverSweeper in safe-mode but this trick don't work for me. I have the last nvidia driver 270 and i have try the 270 beta driver too.
Into game? That work fine (except some artifacts who appear occasionnaly (one time in metro 2033 and one time in battlefield bad company 2) but it's not fine for a new gpu i think :/)
Can you help me to fix that dual screen problem?
2 - SILENCE
My second problem is that i want a silent computer but the fan are too noisy.
Live Update don't find update for my vga bios (currently at 70.24.0A.00.00)
The SN is : 602-V238-16SB1101159115
Here is a link to my BIOS version extract with GPU-Z : http://skarzag.free.fr/bazar/GF114.bin
I don't know if it can help you :p
Thanks for you're help!

there will be a Tool for it avaiable on donation soon at: https://forum-en.msi.com/index.php?topic=148273.0

AP# dual screen issue or not?

Not sure how best to explain this but I posted a QT clip.
MP 2010 with ATI 5770, 12GB ram
Two Apple 24" leds
Screen on left shows selected image - screen on right will have the thumbs in the browser
although it will not show in this clip.
As I apple adjustments to an image, shorty after the image just disappears, then reappears.
If it does not reappear, I can hit "M" for master then "M" again and the version appears again.
Only way to stop it is to leave Full Screen mode, but the issue persists once I go back into FS mode.
I've trashed prefs etc, rebooted, AP# even froze entire MP at one point.
Any thoughts?
Thanks!!
http://gallery.me.com/uhanna#100247

I run with full screen a lot of the time on both my MacPro and MBP without a hitch, all of my libraries and masters are on either a RAID or external USB2 drives.
You mention that you have trashed pref's etc, have you run the gamma of items that work on your library?
http://support.apple.com/kb/HT3805
But to trouble shooting
Are the libraries/masters on the internal drive or an external, what type of drive and what interface?
Are you running any other other apps?
What file type are you working with?
Does the same thing in a new library with only a few images?
Does it only happen with a specific file type?
Does it only happen with a specific adjustment?
A place to start...
Tony

Strange dual screen issue with HP Folio 1040 and docking station

Hi there,
I have a laptop in a docking station. Two displays are connected using the docking station's DisplayPorts. Instead of showing me two separate displays like I'd have expected, xrandr seems to "see" only one large screen.
Laptop: HP EliteBook Folio 1040 with Intel HD 4400 graphics card
Docking station: HP 2013 UltraSlim Docking Station
$ xrandr
Screen 0: minimum 8 x 8, current 1920 x 1080, maximum 32767 x 32767
eDP1 connected 1920x1080+0+0 (normal left inverted right x axis y axis) 309mm x 173mm
1920x1080 60.05*+ 40.03
1400x1050 59.98
1280x1024 60.02
1280x960 60.00
1024x768 60.00
800x600 60.32 56.25
640x480 59.94
DP1 disconnected (normal left inverted right x axis y axis)
HDMI1 disconnected (normal left inverted right x axis y axis)
DP2 connected 1920x1080+0+0 (normal left inverted right x axis y axis) 510mm x 287mm
1920x1080 60.00*+ 59.94
3840x1080 60.00
2560x1024 60.00
1680x1050 59.95
1280x1024 60.02
1280x960 60.00
1280x720 59.97
1024x768 60.00
800x600 60.32
640x480 60.00 59.94
720x400 70.08
HDMI2 disconnected (normal left inverted right x axis y axis)
VIRTUAL1 disconnected (normal left inverted right x axis y axis)
eDP1 is the laptop's built-in display, while DP2 seems to represent _both_ displays. When I select 1920x1080, the two displays show the same. When I select 3840x1080, however, the two displays show a side-by-side setup, such that X11 spans over both of them. While I'm happy that I'm now able to make use of the second display, this obviously breaks some software stuff, like fullscreen video in vlc, for example. Any suggestions what I can do about that? Is it possible to software-split the screen such that it looks like a normal dual-head setup again?
Additional info:
$ lspci | grep VGA
00:02.0 VGA compatible controller: Intel Corporation Haswell-ULT Integrated Graphics Controller (rev 0b)
$ X -version
X.Org X Server 1.15.1
Release Date: 2014-04-13
X Protocol Version 11, Revision 0
Build Operating System: Linux 3.14.0-4-ARCH x86_64
Current Operating System: Linux elite 3.14.6-1-ARCH #1 SMP PREEMPT Sun Jun 8 10:08:38 CEST 2014 x86_64
Kernel command line: initrd=\initramfs-linux.img root=PARTUUID=88c068f1-bc0b-45b0-8836-182c29fe9b41 rw quiet
Build Date: 14 April 2014 08:39:09AM
Current version of pixman: 0.32.4
$ pacman -Qi intel-dri xf86-video-intel | grep Version
Version : 10.2.1-1
Version : 2.99.911-2

You could define two screens in xorg.conf similar to last post here. You would have to select the screen using the -display switch or the DISPLAY variable when using xrandr.

Maverick dual screen issues

Once I installed Maverick I was unable to stretch windows across screens. Is there a fix for that?

Sorry, wrong "gizmo". It's is in Mission Control:
OS X Mavericks: Work in multiple spaces

Dual screen issues!!

Hi, I just bought a new display, Acer x193w 19inch. I set it as my primary display, having my macbook as secondary display. my menubar and dock appear fine on my external display, but the icons are hidden by an overlay (my desktop picture), which only goes away when i use Expose's "show desktop" function. but if I just close all windows on that screen, I cannor right-click on the desktop nor see my icons. anybody have this problem?

The desktop picture is meant to be an underlay, not an overlay. Are you sure you don't just have what you want to be your desktop image open in a viewer app like Preview or something? It doesn't sound normal that the desktop picture whisk away when you hit the Exposé key. It should remain as the background no matter what Exposé key is hit.

Dual screen problem in CS5

I have been using dual screens with no problems until I installed PS CS5. Now when I drag an image onto the secondary screen the canvas goes black as soon as I relsease the mouse. I can see the rulers etc. and when dragging across the diaplay the image can be seen but as soon as I 'let go' it's blacked out. The really frustrating thing is that this doesn't happen in AI or Dreamweaver (or indeed any other program!).
So far I have
Reset the monitors
when changed to show the same on both screens (clone) the image can be seen perfectly ok on both screens
when the secondary monitor is made the primary the problem remains (i.e. the PS image is blacked out on that monitor)
Checked for updates for the monitors (none needed)
Checked CS5 up to date (no updates required)
Checked for graphics card updates (none needed) - NVidia GeForce 8600 GTS
Uninstalled and re installed PS
Pointed in an annoyed manner at the useless window open on my secondary screen
Is there something simple that I have mistakenly chosen that is preventing the use of my secondary screen?

Check to see if nVidia has released an updated driver for your hardware. Go to their web site to check.
Unfortunately, from my observations nVidia may have neglected to keep their driver quality up with later releases for the 8600 GT. I have reports from some of my own customers using my OpenGL software that the driver is troublesome, and have actually reported better results from an older driver version than the very latest release.
Other things you can try to work around the problem:
In Photoshop, Edit - Preferences - Performance, [Advanced...] and change to Basic mode.
Try disabling OpenGL drawing entirely. If that corrects the issue it's almost a certainty that the nVidia driver is at fault.
-Noel

MSI gtx 570 twin frozr III - Dual Screen Windowed mode issues

Ok, so... I was running a solo monitor 1440x900 resolution, i recently purchased a brand new asus 24 inch 1900x1080 monitor. Basically what is happening is when i play WoW or Battlefield 3 in windowed mode on the 1080p monitor the colors are not perfect. When i go full-screen on the new monitor no issues, but that is not what i want to have to live with. When i say the colors are not perfect what i mean is, for example when i look @ the sky instead of being a smooth transition or blend from one shade of the sky to the next it is bars or stripes of each shade as if i am looking at the sky in 8 bit color instead of 32 bit color. Another thing to note is that when i login to windows 7 the blue screen where i input the password has the same effect. The 1440x900 monitor is running everything just fine. the only issue is with the 1080p monitor.
I am using DVI cabling for both, and have swapped them around to see if that was the issue, and sadly it is not. I am running the updated gpu driver, which i uninstalled and re-downloaded and installed again tonight.
When i use the HDMI cable, that fixes the issue but i need the HDMI for my 42 inch tv.
Also in windows, just to cover my bases with this post, i have the native resolutions properly configured, as well as in the game for the given monitor it is being played on.
Anyone know of a fix for this?
i7 2600k
asus PBZ68-v Pro/Gen3
Msi gtx 570
Samsung syncmaster 953bw (1440x900)
Asus VS248 (1900x1080)
I am more than happy to re-explain anything that may not be as descriptive or clear to you just let me know!
EDIT!
When i run the 24 inch 1080p new monitor as my only monitor on the system, everything runs perfectly...
Edit #2
Ok so i have pin pointed a possible cause
This msi gtx 570 struggles with operating multiple displays with different resolutions, while dual screening with my 1080p television and the 1080p display, everything runs as expected. Having to also render a 1440x900 display is probably the reason i am having the graphic issues. Is there any type of utility, setting, or other fix to this type issue? also this gpu is certainly less than 2 weeks since i purchased i could get a different card to remedy this... any suggestion? if you suggest a different card can you say so with certainty that it will work properly under the condition in which 2 resolutions will be required?

Ok, the problem is fixed and Svet i skipped a step or two. I installed the new driver with the clean install to save time for an initial attempt. What is interesting is that with the Geforce driver, only one 1920x1080 resolution was available
The msi driver gave me 2 options, 1920x1080 and 1920x1080 (native). The latter resolution fixed the issue for whatever reason.
The solution to this problem is so easy, when i purchased battlefield 3 it prompted me to download the geforce.com driver and i did not think anything of it at the time, lesson learned.

My Apple Macbook hard drive crashed and I had to replace. Now trying to reload CS5 and having issues. When I click download from Adobe download page, a screen pops up saying "Access Denied". I have serial number, but don't even get to a page to enter. Ple

My Apple Macbook hard drive crashed and I had to replace. Now trying to reload CS5 and having issues. When I click download from Adobe download page, a screen pops up saying "Access Denied". I have serial number, but don't even get to a page to enter. Please help…Thanks!!

Make sure you have cookies enabled and clear your cache. If it continues to fail try using a different browser.
You can also download the trial version of the software thru the page linked below and then use your current serial number to activate it.
Be sure to follow the steps outlined in the Note: Very Important Instructions section on the download pages at this site and have cookies enabled in your browser or else the download will not work properly.
CS5: http://prodesigntools.com/all-adobe-cs5-direct-download-links.html

CS5 Dual Screen Issues

Similar Messages

Maybe you are looking for